Database Develop

unlock problem

i tried several times to CID unlock my device like described in lokiwiz post so i can set another rom on it but does not work , i always get invalid vendor id .
can someone please help me with this ???or tell me what i did wrong .

same problem witm k-jam

thats the tool that i used in first place.see the error in the picture.

joppewillems said:
I have the same here with the same unlock tool,
my phone is a MDA VARIO and I want to set up the new Qtek Rom
Click to expand...
Click to collapse
I ordered the same phone (MDA Vario) from Netherlands a few days ago, still waiting for it to come.
It seems that what i feared the most happened: t-mobile upgraded Vario ROM to the latest release (>= 2.16 if i'm not wrong) and so it is no more possible to CID-unlock (or SIM-unlock) the device. Damn!!!
I'm italian and i don't speak Dutch so i really need to be able to both SIM and CID unlock my device or it'll be just a brick in my hands!
The only possible solution i can suggest is:
- Check your ROM version to see if it's a recent one (>= 2.x) or an older (1.x). If the latter is your case then do not follow next steps and read again lokiwiz thread and istructions. If, instead, you have a recent release (> 2.x) then read on.
- download an old dutch t-mobile ROM (find it here: ftp://ftp.xda-developers.com/Wizard/Roms/Tmobile/MDA_Vario_1060202_103_11210_TMNL_Ship.exe)
PS: if you're using a different model/country then download an old ROM (1.x) from your operator (O2, t-mobile, Orange, etc) in the same original device's language.
- install it (it should not require a CID unlock since it's an official t-mobile dutch release)
- CID (and SIM if you want) unlock your device (lokiwiz should work on an older 1.06 ROM as the one you just installed)
- Install the ROM (even an updated one) that suits you best.
- Last and most important: let us know if you succeded at it!!!
Bye, i really hope this solution works and/or you find a different solution. I think i'll have the same problem very soon!
Isidoro

YOU CANNOT REVERT TO THE OLD ROM.

faria said:
YOU CANNOT REVERT TO THE OLD ROM.
Click to expand...
Click to collapse
YOU CAN !
Several people managed to do it, don't gonna look up the topics for you, but there not so old, so it can be easy to find and otherwise just use search

Or you may find the CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe QTEK ROM installs after which you can use lokiwiz

molski said:
faria said:
YOU CANNOT REVERT TO THE OLD ROM.
Click to expand...
Click to collapse
YOU CAN !
Several people managed to do it, don't gonna look up the topics for you, but there not so old, so it can be easy to find and otherwise just use search
Click to expand...
Click to collapse
...yes, if you have a sd backup from the original rom problem is a 99% of users dont do one when they first get their devices,not of because they are lazy but because most people dont know that there is such haking at first.F ANY ONE HAVE A SD BACKUP IMAGE FROM THE ORIGINAL I-MATE K-JAM PLEASE UPLOAD OR PM ME.THANKS :wink:
5

JoninLA said:
Or you may find the CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe QTEK ROM installs after which you can use lokiwiz
Click to expand...
Click to collapse
even in the k-jam?

JoninLA said:
Or you may find the CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe QTEK ROM installs after which you can use lokiwiz
Click to expand...
Click to collapse
yesssssssssssssssssssssssssss finally downgraded.thank you.u r my saviour

update;
got the lastest o2 rom runing im my k-jam.im overjoyed.i will post a how to soon.

Glad it worked Faria, that custom QTEK ROM seems to be a universal cure if you need to downgrade for some reason.

faria said:
update;
got the lastest o2 rom runing im my k-jam.im overjoyed.i will post a how to soon.
Click to expand...
Click to collapse
Yes, pls, we need that HowTo!!!
Bye,
Isidoro

HOW TO CID. UNLOCK ALL WIZARD VARIANTS
ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
HOW TO CID. UNLOCK ALL WIZARD VARIANTS ( THAT HAVE THE LATEST ROM BUILD )
First domload CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE. Rom from the ftp site from the above link, unpack it and just click the ROMUpdateUtility_Wizard_NoID.exe to start downgrading. Simply follow the prompts .
After the rom are loaded go thru the initial setup as you would with any rom .
Now download the (Lokiwiz02b) from below and follow the instructions .do not forget to copy the. cab file(enable rapi) to your device and run it before running Lokiwiz.
Now run lockiwiz and unlock your machine ,your machine will reboot itself.
That’s it your wizard is unlocked.
Now simply upgrade to any rom ,you want.
a more polisheed version of how to will be posted but i got to go to work now.
MANY THANKS TO JoninLA FOR FINDING THE DOWNGRADING ROM.UPDATED HOW TO HERE;
http://forum.xda-developers.com/viewtopic.php?p=271547#271547

Thanks for help, this solved all my problems but one:
If i CID unlock and SIM unlock my phone (after installing Custom 1.5 WWE ROM) and then i install latest AKU2 I-mate Italian rom, will the SIM unlock (and CID one too) be preserved? Or will the upgrade set the simlock back on the phone?
Thanks,
Isidoro

risidoro said:
Thanks for help, this solved all my problems but one:
If i CID unlock and SIM unlock my phone (after installing Custom 1.5 WWE ROM) and then i install latest AKU2 I-mate Italian rom, will the SIM unlock (and CID one too) be preserved? Or will the upgrade set the simlock back on the phone?
Thanks,
Isidoro
Click to expand...
Click to collapse
As far as I know sim unlock only is needed once as for cid I DONT know but will find out this afternoon when I upgrade to thr latest I-mate rom an then gonna try to load the o2 rom again.as for you soon to be owner you problably just need to use the lokwiz tool because your new machine problably comes with the shipping room that is older as my 2 wizards did .they are only 3 weeks old.
Note;i-mate k-jam comes allready simunlocked from factory .

faria said:
As far as I know sim unlock only is needed once as for cid know know but will find out this afternoon when I upgrade to thr latest I-mate rom an then gonna try to load the o2 rom again.as for you soon to be owner you problably just need to use the lokwiz tool because your new machine problably comes with the shipping room that is older as my 2 wizards did .they are only 3 weeks old.
Note;i-mate k-jam comes allready simunlocked from factory .
Click to expand...
Click to collapse
Thanks for your comment. I really hope that sim lock won't come back when i upgrade to the latest AKU2 rom.
As for the rom i will find in my Vario, i hope it'll be an older one (so i'll be able to use lokiwiz)!!!
Bye

risidoro said:
faria said:
As far as I know sim unlock only is needed once as for cid know know but will find out this afternoon when I upgrade to thr latest I-mate rom an then gonna try to load the o2 rom again.as for you soon to be owner you problably just need to use the lokwiz tool because your new machine problably comes with the shipping room that is older as my 2 wizards did .they are only 3 weeks old.
Note;i-mate k-jam comes allready simunlocked from factory .
Click to expand...
Click to collapse
Thanks for your comment. I really hope that sim lock won't come back when i upgrade to the latest AKU2 rom.
As for the rom i will find in my Vario, i hope it'll be an older one (so i'll be able to use lokiwiz)!!!
Bye
Click to expand...
Click to collapse
Sim-unlock is needed only once as far as I know.
Furthermore I updated my Kjam (simunlock from factory) with the new english rom, then I downgraded to old Italian rom and finally I re-upgraded to Italian new rom without problems. I just do cid-unlock once.
Bye Slump

slumpolo said:
Sim-unlock is needed only once as far as I know.
Furthermore I updated my Kjam (simunlock from factory) with the new english rom, then I downgraded to old Italian rom and finally I re-upgraded to Italian new rom without problems. I just do cid-unlock once.
Bye Slump
Click to expand...
Click to collapse
Grazie Slump! Alla fine mi hai risposto comunque, ehehe!!! Ci si vede, bye!
Thanks Slump!
Bye

{how to} has been updated here;
http://forum.xda-developers.com/viewtopic.php?p=271547#271547

what is rom

Ok I’m a total noob and ‘ve have already unlock my T-Mobile MDA so I can use it as a Cingular cell phone . about I know I got a G3 since my
IPL is 2.xx
Spl is 2.xx
Gsm 2.35.11
os 2.26.10.
Now my Question is what’s next? What’s that rom I’ve been reading about? howe do i know what version i have ? What is the os 2.26.10? What version should I be using? how do I REMOVE THE T-Mobile logo an stuff? I know it’s a lot of question but I figured that every one can jump in and give me some knowledge than you very much .for reading this.

ROM = firmware = Windows mobile
OS 2.26.10.2 = newest oficial firmware
Radio 2.35.11 - I think it does not exist
IPL/SPL = bootloader (it depend on the end of that number) if you have G4 (IPL/SPL ends 0001), than you can`t unlock and write unoficial (better then oficial) ROM
T-Mobile logo is easy to rewrite by any unoficial ROM or by your cooked splash screen

for simplicity...think of a ROM as the operating system and the extended ROM as the bundled software your computer comes with...
you can flash your phone with any wizard ROM you'd like...and as a noob you may not know that most ROM's are cooked without network customizations so you'll need (in your case cingular) the cingular customizations cab file (do a search)
like johnny said...most custom ROM's have all the tmobile/cingular/etc bull**** removed so you won't have to worry about it
the os 2.26.10.x is the version number of a ROM (newest official as of right now)
know this...you will void your warrenty when you unlock your phone further which you'll have to do...so first go here:
http://forum.xda-developers.com/showthread.php?t=285435
and then find a ROM you like...

THX a couple more questions
Ok 1st I need to say THX to both Johnny & j3d1n4s7y For your reply I got a couple more questions if my SPl is 2.26 so I need to down grade to bring it back to 1.xx right?
What is
Rom 2.26.10.2 WWE & Radio 02.47.11 what are their purpose?
thank you in advance

Be Careful...
-tiouko-
I notice that you want to upgrade/downgrade ROMs. Be aware that there are two types of devices, G3 & G4 and you should be aware of what type of phone it is. If when you boot your phone & the IPL & SPL read 2.xx then you have a G3 phone if it reads 2.xx.001 or something like that then you have a G4. Be aware that if you use the wrong type of ROM to flash you will brick your phone - read; read; read; before you start flashing your ROM.
http://forum.xda-developers.com/showthread.php?t=285435 by Doc P is a great read if you have a G3
Good Luck!!
And Btw, I believe ROM stands for "Read Only Memory" which is where you write the OS and then the applications only read from this place. It is pretty much similar to the ROM on your PC.
tiouko said:
Ok 1st I need to say THX to both Johnny & j3d1n4s7y For your reply I got a couple more questions if my SPl is 2.26 so I need to down grade to bring it back to 1.xx right?
What is
Rom 2.26.10.2 WWE & Radio 02.47.11 what are their purpose?
thank you in advance
Click to expand...
Click to collapse

... and WWE = "World Wide English", the language of the ROM. FRE might be for French for example. The World Wide part means that the version is applicable accross all English Locales, as opposed to having localised English versions for Australia, the US, and the UK for example.

Yeah man thanks for the warnings I believe that my is a g3 because is 2.26 and my spl is 2.26 with out the extension. I'm currently doing my readings carefully before i do anythings major.

This is a wonderful thread.
I am a newbie and I am facing lots of problem with my ROM.
I am using Dopod838 and my phone warrenty is void.
I am thinking to upgrade the ROM since my original rom does not support A2DP.
Since my phone is unlock, whereby I can use any provider sim card and use it in my phone, do I still need to unlock my rom?

I got one las question i confirmed that my wizard is a g3 according to the ultimate guide I should downgrade if i want to run home brew rom which is what i wanr to do . I've already downloaded the button rom 1.o5 along with lockwiz o.2b my question is do I cid unlock first or do I downgrade with button 1.o5 than cidunlock second I could of swear I was suppose to cid unlock first.Please help.

tiouko said:
I got one las question i confirmed that my wizard is a g3 according to the ultimate guide I should downgrade if i want to run home brew rom which is what i wanr to do . I've already downloaded the button rom 1.o5 along with lockwiz o.2b my question is do I cid unlock first or do I downgrade with button 1.o5 than cidunlock second I could of swear I was suppose to cid unlock first.Please help.
Click to expand...
Click to collapse
5th Sticky has the information you need, its title is:
SOLUTION FOUND -CID/sim UNLOCKING FOR WIZARD WITH AKU2 ROMS.
Gives you a step by step process. Basically you can't CID unlock until you downgrade to the button rom. By your post it looks like you have the tools you need. This thread will give you the instructions on how to use them and when.

Thx Buddy exactly what I wanted to know I'm going to get started I'll let you know how I did.

Success
Success, success, success Thank you guys so much for your help I did not brick my expansive device .
Ok I followed all the steps on the guide buy using button's 1.05 ROM and wait specially when it reaches 98% Than I used lokiwiz - HTC Wizard Unlocker UPDATE Version 0.2b and finally I used button's 1.05 ROM again to get my SPL down to 1.01. I got my phone both Sim Unlock & Cidunlock I guess I’m ready for the world. Yet still have more questions .
I got
IPL 1.01
SPL1.01
Gsm1.12.10.0
Os1.5.4.2
Now I need to install the best I’m using singular but I don’t care about their ROMs I need the latest of everything including extended roms , radio, you name it . Any suggestion would be greatly appreciated..
Are you listening decent_devil since you seem to be in the boat as I am?

tiouko said:
Success, success, success Thank you guys so much for your help I did not brick my expansive device .
Ok I followed all the steps on the guide buy using button's 1.05 ROM and wait specially when it reaches 98% Than I used lokiwiz - HTC Wizard Unlocker UPDATE Version 0.2b and finally I used button's 1.05 ROM again to get my SPL down to 1.01. I got my phone both Sim Unlock & Cidunlock I guess I’m ready for the world. Yet still have more questions .
I got
IPL 1.01
SPL1.01
Gsm1.12.10.0
Os1.5.4.2
Now I need to install the best I’m using singular but I don’t care about their ROMs I need the latest of everything including extended roms , radio, you name it . Any suggestion would be greatly appreciated..
Are you listening decent_devil since you seem to be in the boat as I am?
Click to expand...
Click to collapse
Yes I m .. hehe! I hv lots to read.. I still got to read through all the sticky note so that I can load a new ROM to my dopod 838.
I'll probe u when I bump into problem.. hehe!

Some of the best ROMs are introduced (and downloadable) via this forum. So you can check out yourself what they include and if it fits your needs.
The latest ROMs are based on AKU 3.2/3.5, but they are still in development and can be a bit buggy.
Personally I am very satisfied using the Molski.biz 2.26.10.2 Final Edition Rom (based on AKU2.3).

skyrebel said:
Some of the best ROMs are introduced (and downloadable) via this forum. So you can check out yourself what they include and if it fits your needs.
The latest ROMs are based on AKU 3.2/3.5, but they are still in development and can be a bit buggy.
Personally I am very satisfied using the Molski.biz 2.26.10.2 Final Edition Rom (based on AKU2.3).
Click to expand...
Click to collapse
thank you sky rebel i'll get right on it.
Also no problem D devil

I have a t-mobile mda....unlocked (but not by me)...how do I know if the CID is unnlocked aswell ?

bruce.wayne_ire said:
I have a t-mobile mda....unlocked (but not by me)...how do I know if the CID is unnlocked aswell ?
Click to expand...
Click to collapse
Qood question I'm not sure being that I', noob but i would assume that it's not cid unlock since you have to go the extra mile to get it cid unlock . can you tell me if you are seeing network logo ie singular or t mobile on the screen is yes it's possible that' it's not cid unlock. but keek asking hopefully some one would have the right answer for you. good luck

bruce.wayne_ire said:
I have a t-mobile mda....unlocked (but not by me)...how do I know if the CID is unnlocked aswell ?
Click to expand...
Click to collapse
If in doubt just CID unlock again. It doesn't hurt anything and that way you can be sure that you are unlocked.

tiouko said:
Also no problem D devil
Click to expand...
Click to collapse
I have successfully upgrade my rom to Molski.biz 2.26.10.2 Final Edition Rom as well!
It solved all the bugs facing by using the default Dopod rom! Hurray!

decent_devil said:
I have successfully upgrade my rom to Molski.biz 2.26.10.2 Final Edition Rom as well!
It solved all the bugs facing by using the default Dopod rom! Hurray!
Click to expand...
Click to collapse
Great man I I'm Using Molski .biz 3.o version. Now come my next challenge. wifi Have you gotten that to work yet? if yes please let me know the procedure cause i can't get that to work.
I know that the wrong thread just thought you might know. If any one read this please help.

Which latest ROM for GPS and HOW to flash it ???

Pardon my ignorance but I am confused with so much technical info here. Loads of ROMs , radio roms, RUU, SSPL, NBH .... etc etc etc.
I have got HTC P3600, original, unlocked to any network, bought in UK from expansys. So not sure whether it got CID lock or not but certainly not locked to any network / no sim lock.
I want to know:
1. Which is the latest GPS enabled ROM available TODAY, which I can use to flash my device ? (where language remains English!! and bass or other bugs solved, if possible)
2. Is there a way to find out before flashing that whether device is CID locked or not? and whether it needs to be unlocked before flashing.
3. How to flash ROM ? Kindly, I need step by step guidance from A to Z.
Which files to download, which to execute first and basically everything you need to do in order to flash gps enabled rom.
I will be much obliged for this help and guidance.
Thanks.

dr_s said:
Pardon my ignorance but I am confused with so much technical info here. Loads of ROMs , radio roms, RUU, SSPL, NBH .... etc etc etc.
I have got HTC P3600, original, unlocked to any network, bought in UK from expansys. So not sure whether it got CID lock or not but certainly not locked to any network / no sim lock.
I want to know:
1. Which is the latest GPS enabled ROM available TODAY, which I can use to flash my device ? (where language remains English!! and bass or other bugs solved, if possible)
2. Is there a way to find out before flashing that whether device is CID locked or not? and whether it needs to be unlocked before flashing.
3. How to flash ROM ? Kindly, I need step by step guidance from A to Z.
Which files to download, which to execute first and basically everything you need to do in order to flash gps enabled rom.
I will be much obliged for this help and guidance.
Thanks.
Click to expand...
Click to collapse
All you have to do is to download this:
http://rapidshare.com/files/21139137/RUU_Trinity_HTC_WWE_1.23.800.2_6275_1.38.00.11_Ship.exe|
(It is the latest)
And after connect your p3600 and run the exe.
Try it...

Has someone flashed that ROM on a NON supercid device with SSPL?
Is it possible?
Thanks

sAnTeE said:
Has someone flashed that ROM on a NON supercid device with SSPL?
Is it possible?
Thanks
Click to expand...
Click to collapse
Yes i do..
Only the extended_rom stay the same...
You have to be supercid for edit the extended_rom but....
http://forum.xda-developers.com/showthread.php?t=297209
FiXeD....

You're great!!!
So I've just to run SSPL and launch the rom as in previous DOPOD roms?
If you can confirm that I'll flash it 'cause I've got serious troubles with my SD using ITA ROM

sAnTeE said:
You're great!!!
So I've just to run SSPL and launch the rom as in previous DOPOD roms?
If you can confirm that I'll flash it 'cause I've got serious troubles with my SD using ITA ROM
Click to expand...
Click to collapse
No the sspl it is included in the exe....
Just download this:
LVSW_RUU_Trinity_HTC_WWE_1.23.800.2_6275_1.38.00.11
Connect your p3600
And run it.....
That's all..

ausdim said:
No the sspl it is included in the exe....
Just download this:
http://rapidshare.com/files/21139137/RUU_Trinity_HTC_WWE_1.23.800.2_6275_1.38.00.11_Ship.exe|
Connect your p3600
And run it.....
That's all..
Click to expand...
Click to collapse
Thank you dude!!!
I'm recharging my device for the flashing

Hi santee, are you enjoying your 3rd flash in 3 days? And is your trinity enjoying it too? Let me know as soon as possible if this rom is the coolest you've tried, ok?

ausdim said:
All you have to do is to download this:
http://rapidshare.com/files/21139137/RUU_Trinity_HTC_WWE_1.23.800.2_6275_1.38.00.11_Ship.exe|
(It is the latest)
And after connect your p3600 and run the exe.
Try it...
Click to expand...
Click to collapse
Hello ausdim and everyone else,
I've also got an HTC P3600 and I bought mine from a shop and it came SIM unlocked. Do you think my P3600 is CID unlocked? and this rom http://rapidshare.com/files/21139137... p.exe%7C which you have suggested dr_s to download, what is it? Is it an HTC Rom?
Would appreciate any help.
Thanks.

i'm really confused on the roms
ok, here's are my simple questions
1. is the ROM RUU_Trinity_HTC_WWE_1.23.800.2_6275_1.38.00.11_Ship.exe and official ROM (e.g., is it a test ROM from HTC)?
2. I have an unlocked P3600; do i need to CID unlock to flash with the RUU_Trinity_HTC_WWE_1.23.800.2_6275_1.38.00.11_Ship.exe ROM.
4. i understand that the rom
LVSW_RUU_Trinity_HTC_WWE_1.23.800.2_6275_1.38.00.11 is a cooked ROM. Yes or No? What are the benefits of using this ROM.
thanks to anyone who answers my questions. i've flashed ROMS before and [like others] i don't want to brick my lovely device.

cortezzi said:
1. is the ROM RUU_Trinity_HTC_WWE_1.23.800.2_6275_1.38.00.11_Ship.exe and official ROM (e.g., is it a test ROM from HTC)?
Click to expand...
Click to collapse
No. This was cooked based on the Dopod release.
cortezzi said:
2. I have an unlocked P3600; do i need to CID unlock to flash with the RUU_Trinity_HTC_WWE_1.23.800.2_6275_1.38.00.11_Ship.exe ROM.
Click to expand...
Click to collapse
No. It uses SSPL.
cortezzi said:
4. i understand that the rom
LVSW_RUU_Trinity_HTC_WWE_1.23.800.2_6275_1.38.00.11 is a cooked ROM. Yes or No? What are the benefits of using this ROM.
Click to expand...
Click to collapse
I believe that this is the same ROM as the "ship" version you asked about.
I have tried both the Dopod ROM as well as the "ship" ROM, and my preference was to stay with the Dopod ROM. The green dialer skin did not apeal to me, and I had some other issues that I don't remeber at this time. The official Dopod ROM, however, (especially after being patched with Pof's radio update), has been great!

Swisscom branded Trinity has GPS and tomtom preinstalled...
May be I am late to update this..
For some days I am not following this forum but just got an update from a shop locally here and thought of adding my information.
Trinity
link here : http://www.swisscom.com/onlineshop/...andys&opn=O&sku=000000000000121030&lang=en-GB
swisscom Mobile Assistant XPA v1510
+ 1GB card
+ tomtom 6 alpine maps included user will only need to activate the maps.
At attractive price of CHF 999.
Looking at history of Swisscom devices, they are not locked. However, since all have unlok solution availbale, this will not matter.
I hope this helps trinity community..
just not note : I do not own this else I would have loved help others.
AS

asqteks100 said:
May be I am late to update this..
For some days I am not following this forum but just got an update from a shop locally here and thought of adding my information.
Trinity
link here : http://www.swisscom.com/onlineshop/...andys&opn=O&sku=000000000000121030&lang=en-GB
swisscom Mobile Assistant XPA v1510
+ 1GB card
+ tomtom 6 alpine maps included user will only need to activate the maps.
At attractive price of CHF 999.
Looking at history of Swisscom devices, they are not locked. However, since all have unlok solution availbale, this will not matter.
I hope this helps trinity community..
just not note : I do not own this else I would have loved help others.
AS
Click to expand...
Click to collapse
Yes all true, a friend of mine just bought this package on a 2 year contract for CHF560. Now that is a good deal! His is not getting 3G...yet. I'm sure we'll be able to turn it on with a reg hack.

Moving from T-Mobile UK 2.21.2.6 WWE to better/different ROM?

I'm having a WiFi problem as outlined in this thread, but nobody seems to be able to offer any help:
http://forum.xda-developers.com/showthread.php?t=324952
I'm thinking of upgrading from the official T-Mobile UK 2.21.2.6 WWE ROM I have installed to another network provider ROM to see if that fixes the problem.
But will updating from my current ROM to, say, an O2 UK official ROM work the same way as a simple ROM update, or will it brick the phone?
Does it need to be CID unlocked? I've ran what I think was the latest LokiWiz to unlock the SIM, but did this SID unlock the phone as well? How do I tell?
How do I know whether my phone's an AKU2 or AKU3?
And what's the best (i.e., most reliable) official ROM? Would upgrading to WM6 help anything?
Sorry if I'm going over ground covered a lot elsewhere, but the sheer amount of FAQs on CID/SIM/AKU etc., is incredibly overwhelming and confusing.
Thanks in advance for any help, it's greatly appreciated.

cornsanchez said:
Does it need to be CID unlocked? I've ran what I think was the latest LokiWiz to unlock the SIM, but did this SID unlock the phone as well? How do I tell?
Click to expand...
Click to collapse
You will need LokiWiz 02b to CID unlock your device (if it is a G3)
How do I know whether my phone's an AKU2 or AKU3?
Click to expand...
Click to collapse
There is probably an easier method however if you run the program "Registry Wizard" it normally tells you on start up
And what's the best (i.e., most reliable) official ROM? Would upgrading to WM6 help anything?
Click to expand...
Click to collapse
ROMS are all preference really.. at the moment im using T-mobile 2.26 US which i have found to be the best ROM (with applications / themes obviously) as T-mobile UK Rom is over a year old and is crap.
i have upgraded to WM6 3 times? and all 3 times i had problems, i am currently waiting for most of the bugs to be sorted..
keep us posted

upgrading from Danish wm6.1 to WWE 6.5

hi,
I want to upgrade from my Danish wm 6.1 to HTC official WWE 6.5. Is it possible to do without complex tricks or hacks? By doing so would I void my warranty?

Hi
Your guarantee is void, yes.
If you still want to upgrade, you first of all, have to install HardSPL v1.83, then choose a ROM to use/try.
regards

roynielsen2000 said:
Hi
Your guarantee is void, yes.
If you still want to upgrade, you first of all, have to install HardSPL v1.83, then choose a ROM to use/try.
regards
Click to expand...
Click to collapse
Thanks for the reply. I would better use Danish ROM.

well but you still can go back to the original phone status if there should be some defect, so if you want WWE id give it a try and hardspl it

ok
ok I shall look for it.