hey everyone! new user here! just have a quick question. i have all the files necessary to run tomtom 6 on my wing. i put the whole folder(tomtom nav/usa canada maps/etc) on my sd card and when i run the tomtom .exe file it starts up fine but then on the screen it says "no maps found!" how come when i have all the files on the sd card! am i doing something wrong???
also, when i ran the .exe file, there was no "icon" created in the programs folder or start menu. is there any way to install one so i dont have to use file explorer EVERYTIME i wanna use tomtom 6?
thanks dudes!
rush2zerogja said:
hey everyone! new user here! just have a quick question. i have all the files necessary to run tomtom 6 on my wing. i put the whole folder(tomtom nav/usa canada maps/etc) on my sd card and when i run the tomtom .exe file it starts up fine but then on the screen it says "no maps found!" how come when i have all the files on the sd card! am i doing something wrong???
also, when i ran the .exe file, there was no "icon" created in the programs folder or start menu. is there any way to install one so i dont have to use file explorer EVERYTIME i wanna use tomtom 6?
thanks dudes!
Click to expand...
Click to collapse
I believe Tom Tom needs to be installed through your PC using activesync.
I dont use it though...
p.s.
all the tomtom files i had was from the old "universal" i used to play around with!
at that time, it worked fine with my wing(stock t-mobile ROM) but then i sold those two devices and then just recently, i decided to make the wing my MAIN phone again so i bought another one(lol) but now i cant get it to work!
i flashed my device with opentouch 2.7 biggy(GREAT ROM btw, kudos ttran!) if that makes any difference.
rush2zerogja said:
all the tomtom files i had was from the old "universal" i used to play around with!
at that time, it worked fine with my wing(stock t-mobile ROM) but then i sold those two devices and then just recently, i decided to make the wing my MAIN phone again so i bought another one(lol) but now i cant get it to work!
i flashed my device with opentouch 2.7 biggy(GREAT ROM btw, kudos ttran!) if that makes any difference.
Click to expand...
Click to collapse
Did you even try what I recommended? Make sure all of the files are in a folder on your PC hard drive and run the .exe from there. Make sure your phone is connected through activesync.
thanks
hey thanks for your reply JLine05! that was quick!!!
ok. we'll do. im gonna try it out right now. ill post back up in a bit! thanks again, man!
ok. tried that but it didnt work! my pc says tomtom 6 is not a valid win32 app. this is with my wing connected via activesync too! hmmmm... im gonna try just separating all the items in the tomtom nav folder and put 'em out on the main dir. of my sd card.
or should should i just put the tomtom .exe file in /windows or /windows/programs or something like that and then run it???
this is also a bit off topic(sorry) but in the meantime, does anyone know how to change the clock colors? i've downloaded the files for the different colors but i cant put it in /windows! it says that the files im trying to replace is a "read-only" file therefore i cant delete/overwrite it!!!
is there a reg tweak or something that im missing???
one more thing. do you guys experience having issues turning on bt & wifi AT THE SAME TIME??? bec. see, i wanna surf the web while listening to mp3s via a2dp and i have my bt headset connected but then when i turn on wifi it just keeps on asking me for my password(wep key). i have all my wifi settings configured and it connects w/o asking for the wep(no problems) it just asks for it when im streaming mp3s to my bt headset!
as always, any help is appreciated!
I GOT IT!!!
i just extracted the file folder contents into the main dir. of the sd card and it worked!!! now all i need is to buy me a gps receiver & im all set! hehehe...
but i still got no tomtom icon in programs/start menu so i have to use file explorer everytime i wanna use it! is there any way to fix this?
rush2zerogja said:
i just extracted the file folder contents into the main dir. of the sd card and it worked!!! now all i need is to buy me a gps receiver & im all set! hehehe...
but i still got no tomtom icon in programs/start menu so i have to use file explorer everytime i wanna use it! is there any way to fix this?
Click to expand...
Click to collapse
Use total commander.
Find the .exe file and highlight it.
Click on File, then >>>>> (A), then choose create shortcut.
Click on Tree when the box comes up.
Click on the + to expand the windows directory.
Expand the Start Menu Directory.
Then you can point it to either programs or settings.
Now when you want to open it, a shortcut will be in the folder that you chose.
JLine05 said:
Use total commander.
Find the .exe file and highlight it.
Click on File, then >>>>> (A), then choose create shortcut.
Click on Tree when the box comes up.
Click on the + to expand the windows directory.
Expand the Start Menu Directory.
Then you can point it to either programs or settings.
Now when you want to open it, a shortcut will be in the folder that you chose.
Click to expand...
Click to collapse
thanks for the help, mate! everythings good!
i just put the shortcut in /windows/start menu/programs and it works like a charm!
Related
ok so im new to this game..ive been reading the threads and posts over and over and over again...so ive got a brand new unit so i should have to install any RUU...so i make sure im a guest in active sync..i download the RAR file for touchflo on my computer..i drag the ASerg Policies.CAB file from a folder into my Wing folder named Storage Device..run the program..then i soft reset...then from my computer i run 1_RomUpdate.bat or whatever...the Dos prompt comes up..its says press any key I do..then it makes a list of all these files and after each file it says (for example "ce_run,exe is not recognized as an internal or external command, operable program or batch file. ...after that i hard reset like im supposed to...for some reason it just goes back to the regular Wing interface...can someone help me out..please...i got the phone a couple hours ago and i cant put it down until i figure this out LOL..its driving me nuts
Hard Reset then redo. Or put it back to the original RUU deal then try it again.
latinluvuh said:
ok so im new to this game..ive been reading the threads and posts over and over and over again...so ive got a brand new unit so i should have to install any RUU...so i make sure im a guest in active sync..i download the RAR file for touchflo on my computer..i drag the ASerg Policies.CAB file from a folder into my Wing folder named Storage Device..run the program..then i soft reset...then from my computer i run 1_RomUpdate.bat or whatever...the Dos prompt comes up..its says press any key I do..then it makes a list of all these files and after each file it says (for example "ce_run,exe is not recognized as an internal or external command, operable program or batch file. ...after that i hard reset like im supposed to...for some reason it just goes back to the regular Wing interface...can someone help me out..please...i got the phone a couple hours ago and i cant put it down until i figure this out LOL..its driving me nuts
Click to expand...
Click to collapse
It's not seeing the files that it calls for within that batch file. Where do you have your files stored?
what rom are you trying to flash?
I know with PDAVIET you have to aserg twice and soft reset after each.
Also, IT IS IMPERATIVE that you flash over an RUU.
as far as "ivanmmj's" comment goes..lets see where am i stashing the files..after it opens up using WINRAR i just use the directory right from WINRAR im not actually moving the files onto my hard drive....
I am was trying to install the ITOUCH FINAL V2 blah blah blah...
I installed the 5 button setup and the overclocking program with the battery indicator..
i got everything to work that just involves moving CAB files over..obviously a simple thing that doenst need a page long thread to explain how to install..
I still need help..im following directions but like ivanmmj said its not reading the files ..still need help LOL
latinluvuh said:
as far as "ivanmmj's" comment goes..lets see where am i stashing the files..after it opens up using WINRAR i just use the directory right from WINRAR im not actually moving the files onto my hard drive....
Click to expand...
Click to collapse
There's your problem. You need to unrar the files to a directory. Then open a command prompt and run the batch file from that directory.
Hi,
Every time my Kaiser boots, directly Tomtom boots. That's very anoying, it's not in startup folder, tomtom is installed on sd.
any ideas?
Thanx
You'll find a directory on the root of your SD card '2577'
Copy this to your PC (you will need to replace it if ever you need to re-install) and then delete it.
It's for when you first put in the card but for some reason does not de-activate.
@Farsquidge
Thanx it worked, so happy now!
When I delete 2577 folder and start up tomtom again it cant find my maps...its very strange like that...any ideas?
That's very strange.
Have you actually installed the SW or are you just running the App from the SD card?
I think a better option for not having tomtom automatically start at boot up is to simply remove the autorun.exe file from the 2577 folder and leave everything else there. Did it right after buying my Tilt and haven't had the auto start problem since.
I have it installed to the phone...I dont know why the 2577 folder is so important.....??.....
dwcliff703 said:
I think a better option for not having tomtom automatically start at boot up is to simply remove the autorun.exe file from the 2577 folder and leave everything else there. Did it right after buying my Tilt and haven't had the auto start problem since.
Click to expand...
Click to collapse
When I remove that file, or any file for that matter in the 2577 folder it either still auto starts or says cannot find maps, what is the deal. Also when i boot the phone it also tries to install tomtom all over while the program starts too, I have to wait like 5 minutes for phone to becoem responsive to touch or buttons.
dtjunkie07 said:
I have it installed to the phone...I dont know why the 2577 folder is so important.....??.....
Click to expand...
Click to collapse
The 2577 directory is an autorun directory which means any program called autorun.exe inside will run as soon as the SD card is put into the device. Usually is used by GPS software for installation of its files.
just rename the 2577 file (e.g. call it 2577-ttn) and this should fix the auto-run problem. If you then want to change it back to autorun, just rename it 2577 again.
rienzi said:
just rename the 2577 file (e.g. call it 2577-ttn) and this should fix the auto-run problem. If you then want to change it back to autorun, just rename it 2577 again.
Click to expand...
Click to collapse
it says maps not found when you do that. anything I change or remove in the 2577 folder makes tom tom say no maps found, why does it need auto run for the maps??????????
moddin said:
it says maps not found when you do that. anything I change or remove in the 2577 folder makes tom tom say no maps found, why does it need auto run for the maps??????????
Click to expand...
Click to collapse
Make sure the "ttnavigator.bif" file is under "\Storage Card\". Copy it from "\(Storage Card\)Program Files\navigator" directory if it's not there. Otherwise I have no idea.
I've searched and I've asked and no one wants to help...Could someone please point me in the direction that I need to be in
Purpose
Sliding sounds
Games
and other applications..
Thanks
A CAB installation is just like a Desktop installation but on your phone... Transfer the CAB to you phone (I put all mine on the memory card), click on the CAB, then install app. Generally if you have a memory card, the CAB installation will give you the choice to install to the phone or card.
mchapman007 said:
A CAB installation is just like a Desktop installation but on your phone... Transfer the CAB to you phone (I put all mine on the memory card), click on the CAB, then install app. Generally if you have a memory card, the CAB installation will give you the choice to install to the phone or card.
Click to expand...
Click to collapse
So I copy the folder to the card..Then I click the cab from the desktop or using the phone???
*tries it out now*
Thanks man for you input
On your storage card create a folder called "cabs". Then put the cabs you want to install on your phone in this folder. Then open up file explorer (on your phone) and go to the cabs folder. Then select the cab you want to install by pressing it on screen or with the hard down key. Your phone will start to install the cab and it will ask you where you want to install (either phone memory or your memory card), choose which one you want. Note that some programs work better when installed to the phone (read and you'll find out suggestions). After the installation is complete your phone will tell you that it was successful.
Ron
I don't know
"click on the CAB, then install app. Generally if you have a memory card, the CAB installation will give you the choice to install to the phone or card."
Do I unzip with the phone or the desktop???? I copied the folders to the card...after that I'm lost...How do I run the application???
smoka said:
I don't know
"click on the CAB, then install app. Generally if you have a memory card, the CAB installation will give you the choice to install to the phone or card."
Do I unzip with the phone or the desktop???? I copied the folders to the card...after that I'm lost...How do I run the application???
Click to expand...
Click to collapse
Unzip the folder on your computer and transfer the cab over into the "cab folder" on your memory card. Open file explorer on your phone, navigate to the "cab folder" on your memory card, select the cab to install and your done. No need to copy the whole folder to your phone, just the cab.
Ron
mark43 said:
On your storage card create a folder called "cabs". Then put the cabs you want to install on your phone in this folder. Then open up file explorer (on your phone) and go to the cabs folder. Then select the cab you want to install by pressing it on screen or with the hard down key. Your phone will start to install the cab and it will ask you where you want to install (either phone memory or your memory card), choose which one you want. Note that some programs work better when installed to the phone (read and you'll find out suggestions). After the installation is complete your phone will tell you that it was successful.
Ron
Click to expand...
Click to collapse
Thanks for your input...I tried that and it gives me
"There is no application associated with"00CABE91".Run the application first,then open the file within the application"
What am I doing wrong????
smoka said:
Thanks for your input...I tried that and it gives me
"There is no application associated with"00CABE91".Run the application first,then open the file within the application"
What am I doing wrong????
Click to expand...
Click to collapse
That is not a .cab I will attach a cab for you to try. I it is the transformers sliding cab. No need to unzip. Just download it to your computer and transfer it to your phone with either activesync or take out your memory card, stick it into your computer and put it in the folder you want. Let me know if it works.
Ron
thats the one I'm trying to use...So I need to pull the memory card out and active sync it... So how do I add those to the active sync task????
Thanks for your patience
smoka said:
thats the one I'm trying to use...So I need to pull the memory card out and active sync it... So how do I add those to the active sync task????
Thanks for your patience
Click to expand...
Click to collapse
Open activesync and conect your device. Make sure you have a green symbol and click explore which is to the right of schedule. It opens your device and navigate to your memory card and cab folder if you have one. Then on your computer right click on the cab you downloaded and select copy. Now go to the window you brought up when you hit explore and right click in the destination and select paste. Now you have the cab on your phone. Next, on your phone open file explorer and navigate to the folder where you just pasted the cab and select it.
Ron
Come ON!!!!!
Please don't take offense. But, if you need this much help to install a CAB, you better spend a whole lot more time reading this forum before you touch you phone and really mess it up.
mchapman007 said:
Please don't take offense. But, if you need this much help to install a CAB, you better spend a whole lot more time reading this forum before you touch you phone and really mess it up.
Click to expand...
Click to collapse
no offense
mchapman007 said:
Please don't take offense. But, if you need this much help to install a CAB, you better spend a whole lot more time reading this forum before you touch you phone and really mess it up.
Click to expand...
Click to collapse
+1!!!!!!!!
Do not uncompress (unzip or rar) cab file.
He is uncompressing the cab into a folder and transfering it. His compression software shows the cab as compressed.
Just transfer the cab uncompressed and click on it and it will install. I bet that does the trick.
Also, if you want you can change it so that your compression software doesn't see CABs. I use WinRAR and you can just uncheck it under options>settings>integration and just uncheck CAB.
... LOL?...
a .cab is the "installer file" in windows mobile.
Steps:
1. Copy the .cab file into your phone
2. Open the File explorer in your phone and look for the .cab File
3. Click on it
4. Choose the place where you want to install it
5. Enjoy your new program(or sliding sound or anything)
Batchell said:
Do not uncompress (unzip or rar) cab file.
He is uncompressing the cab into a folder and transfering it. His compression software shows the cab as compressed.
Just transfer the cab uncompressed and click on it and it will install. I bet that does the trick.
Click to expand...
Click to collapse
Thanks Batchell..However I was able to get my question answered by ANOTHER HELPFUL FORUM!!!!! I've only had my phone for 2 months and I DIDN'T know that you didn't have to unzip the files...I didn't have to worry about that stuff with a TREO... So to all that was helpful I really appreciate it..and the others with all of the slick jokes are bunch of assholes...yep I said it..Thats why I asked for a tutorial for cab installation smartass!!!!!!
This is a developer forum. If you ask a question here, it is assumed that you have a moderate level of computer literacy. This includes being able to unzip files.
Next time, please state you know NOTHING and people will give you the appropriate level of help.
Before others flame you even more for your last comment, I'm closing this thread for being inflammatory.
hi guys, im new here and got my diamond just yesterday.. its my first pocket pc, and i need real help..
looked around the forums and found a lot of good stuff..
downloaded a couple of applications like advanced configuration tools, gsen, registery editor, but i dont know how to install them. when i unzip the files on my pc the are in xml format and when i double click on the setup file it opens in notepad..
plz help me, what should i do? how do i install these applications?
Instead of unzipping the .cab files on your pc, you need to copy them to your diamond (using activesync or select 'disk drive' when you plug it in).
Then open file explorer on your diamond, navigate to where you copied the .cab file, and run it - .cab is an installer file for windows mobile applications
Marridi said:
hi guys, im new here and got my diamond just yesterday.. its my first pocket pc, and i need real help..
looked around the forums and found a lot of good stuff..
downloaded a couple of applications like advanced configuration tools, gsen, registery editor, but i dont know how to install them. when i unzip the files on my pc the are in xml format and when i double click on the setup file it opens in notepad..
plz help me, what should i do? how do i install these applications?
Click to expand...
Click to collapse
Or for a longer version of this:
StarMonkee said:
Instead of unzipping the .cab files on your pc, you need to copy them to your diamond (using activesync or select 'disk drive' when you plug it in).
Then open file explorer on your diamond, navigate to where you copied the .cab file, and run it - .cab is an installer file for windows mobile applications
Click to expand...
Click to collapse
Do the following, hehe
When you download most programs they will be in .CAB format. Now all this means is that they can be installed DIRECT from the phone.
What I do is create a folder on my Diamond in Internal Storage called APPS and make sure my Diamond is synced to my pc / laptop using Activesync on XP or Windows Mobile Device centre if on Vista and then copy all the .CABS that i have downloaded into the APPS folder on my phone.
Once im ready to install the applications its very simple.
On your Diamond click on START and then PROGRAMS and locate FILE EXPLORER.
When FILE EXPLORER has loaded up in the top left of the window you will notice a memory card icon with the current directory you mobile is pointing to, push this and you will then see MY DEVICE and the location you are currently at.
If you have used a pc before its very similar to how the pc windows explorer used to navigate, anyway, select MY DEVICE and then choose INTERNAL STORAGE and then APPS.
Then its just a matter of selecting which application you wish to install as all the .CABS will be displayed. Select the one you want to install and follow the installation process.
If there are any small programs 1mb or less then I tend to install these onto my phone storage memory and for games I install them onto INTERNAL STORAGE but its up to you. Some programs require a SOFT RESET to work.
The SOFT RESET button is located where the STYLUS is stored on the phone, pull the STYLUS out and then you will see a RED BUTTON inside.
Push this and your phone will restart.
There is more information here at good ol xda-developers.com and also http://modmydiamond.info
Hope this helps!
Tom
thnx guys, but i know this, i did install some applications that end with caB, but when i tried to install the gsen or the advanced config for example, they didnt come in .CAB form. they came as zip and when i opened the file, all there was files and the one names setup was as xml.
i dont know, maybe i downloading the wrong files!! plz help? where do i download those files in .CAB format?
it worked, thnx guys..
xda is the best forum all around..
I would like to introduce in one .cab/.zip file the hexagonal start menu files compatible with WM 6.5 and 240x240 screens (like the Treo 750). The hexagonal start menu was removed from some WM 6.5 installations and now you can reinstall it.
Comes in two versions, with and without border.
.cab instructions:
1) Create an ActiveSync connection with your phone.
2) Copy the .cab file to your device.
3) Locate the .cab file on your device using Total Commander, or Resco Explorer.
4) Run the .cab file and let it install. Accept OVERWRITE if prompted.
5) Soft reset your device!
.zip instructions:
1) Create an ActiveSync connection with your phone.
2) Unzip the .zip file to your place of choice.
3) Browse your device, and copy and paste the files to your phone or SD card.
4) Use Total Commander, or Resco Explorer to locate where you placed the files and COPY/OVERWRITE all three files to the \Windows directory on your device.
5) Soft reset your device!
When your phone is finished booting open your start menu and enjoy some hexagons
thanks
I will give it try...
bug report...
navenedrob said:
When your phone is finished booting open your start menu and enjoy some hexagons
Click to expand...
Click to collapse
Or not, it just doesn't work...
both files freeze the start menu button...
Am I doing anything wrong?
I've just done what you told...
superhiperclim said:
Or not, it just doesn't work...
both files freeze the start menu button...
Am I doing anything wrong?
I've just done what you told...
Click to expand...
Click to collapse
There was a problem with the .cab software I was using and it stripping the information from the .cpr files. I have re-uploaded the files in .zip format and changed the instructions. Try it again I promise it will work! This new way is more manual work, but it is very easy to do. I recommend using Total Commander as linked above. When in Total Commander select all three files and select copy, then browse to your \Windows directory and select paste. It will ask you to overwrite a file, select YES. After you are done, soft reset your phone.
Updated with working .cab files, feel free to download and install them!
great work
I've just instaled the .cab of the one with borders, and it's just sweet...
it's just beatiful... I RECOMEND it
superhiperclim said:
I've just instaled the .cab of the one with borders, and it's just sweet...
it's just beatiful... I RECOMEND it
Click to expand...
Click to collapse
Thank you! If there is enough interest I will make different shapes/colors/FX as well!
Will this work on a 240x320 device? I'm guessing no since you labeled it 240x240. Just wondering, I would like to try it out.
What is the difference between with or w/o border? What border?
pederb said:
What is the difference between with or w/o border? What border?
Click to expand...
Click to collapse
I made that same question to my self, and just tryed both...
with borders you have the hexagon and borders highligted, on the one with no borders you just have the hexagon... you will not experience memory problems since the memory used to make the hexagons is the same used by windows to highligt the icons on the start menu...
I prefer the one with borders if you want to know
navenedrob said:
Thank you! If there is enough interest I will make different shapes/colors/FX as well!
Click to expand...
Click to collapse
Yes please
It gives a litle fun touch to the "menu".
Sorry for my english...
Mobile Office
I notice that there is no office installed with this ROM. When I tried to update my Office to 6.1, it would not install because it was not currently on. Is there a way to install a previous version so I can do the update?
Aside from that, I am liking this 6.5. I had 6.1 and it didn't look any different from the previous 6.0. I am using an unlocked Cingular 750 on the T-Mobile network. I have been using a Black Dash, which I loved the Kavana ROM on!
You can get office from here
how about a picture - to wet the appetite!