anybody like the band "Porcupine Tree" ?
Related
I posted the same question to Diamond forum by mistake.
I want to know what 3G frequency/band (850 or 1900MHz) in being used.
Is there any software?
Field Test maybe?
ChumleyEX said:
Field Test maybe?
Click to expand...
Click to collapse
I have it but what parameter should I check?
"Band" on GSM page shows "255: <unknown>".
What does it mean? How do I check for 3G, not GSM?
I have no clue
ChumleyEX said:
I have no clue
Click to expand...
Click to collapse
Anybody can help me?
K-Mobile said:
Anybody can help me?
Click to expand...
Click to collapse
your phone needs to W-CDMA or UMTS capabale to support 3G. if you are using WM 6.1 it should also give you the option to automatically select Network type and GSM/UMTS band depending on the network you are in.
to check your options goto start-settings-Band tab- and look under network type and Band if you see WCDMA and UMTS settings there then your phone will use those when in a 3G network.
UMTS bands are typically 2100 or 1900+850
Again all of the above info is freely available on the internet..just google for 3G and you'll be well informed on the subject
Thanks, Prabh.
But I know the Band information tab in Phone setting and I selected;
Network type = Auto
GSM/UMTS band = GSM(1900+850)+UMTS(1900+850)
What I want to know is...Which frequency (1900 or 850) I am currently on.
K-Mobile said:
Thanks, Prabh.
But I know the Band information tab in Phone setting and I selected;
Network type = Auto
GSM/UMTS band = GSM(1900+850)+UMTS(1900+850)
What I want to know is...Which frequency (1900 or 850) I am currently on.
Click to expand...
Click to collapse
Check with your Service Providor they should be able to provide that info for you...just curious but is there any reason in particular that you need to know this info ?
prabh said:
Check with your Service Providor they should be able to provide that info for you...just curious but is there any reason in particular that you need to know this info ?
Click to expand...
Click to collapse
I am going to switch over to Touch Diamond or Touch Pro.
US Diamond/Pro supports UMTS 850/1900MHz but I need UMTS2100 as well
because I often travel to Japan for biz trip.
I know UMTS1900 is widely operated in US but if my area (I live in NY) is in UMTS850
coverage, I will go for Aussie version which supports UMTS 850/2100MHz.
Hello!
The question is easy can i make my international i9000 to work with tmo 3g?
I did some search but no straight answer some says i cant some i can, i ve heard something about upstream and 1700 mhz and 2100 mhz aswell.
so please if anybody knows its possible or impossible tell me ,and if possible wich modem should i use and how.
thank youu
bump anyone pleasee!!
I have this problem too. Worried I might brick the phone since I had an issue with flashing modems before.
I have the i-9000t which is close to the international. Supposedly supports the tmobile band. But I cant get the *#2263# code to work. I get the following message:
Invalid MMI code or connection problem
Trying to set band 12 as primary and band 4 as secondary. The engineering screen via *#*#3282#*#* brings up a band selection priority, but band 4 is not listed on there. Just 12,25,26, and 41. Does anyone know if what I'm trying to do is possible or if there is a ROM to do this?
kgor93 said:
Trying to set band 12 as primary and band 4 as secondary. The engineering screen via *#*#3282#*#* brings up a band selection priority, but band 4 is not listed on there. Just 12,25,26, and 41. Does anyone know if what I'm trying to do is possible or if there is a ROM to do this?
Click to expand...
Click to collapse
See if this helps:
http://forum.xda-developers.com/showthread.php?t=3042373
Hi guys,
I'd like to get the new Nokia 7 plus but I'm quite puzzle about the body DAS (SAR) value (> 1.7). I saw that this last one was obtained for the LTE Band 1.
I know that it's possible to select RF bands by using the code: *#2263#. Can you folks tell me if this code (or another one) is fully working on a non root system? And if yes, if I'll be able to unselect the LTE band 1 ?
Thanks for your help,
Guismo
Hi I am an user of a Nokia 7 Plus TA-1062 wich in the documentation says it supports Band 3 LTE (1800) https://www.phonemore.com/nokia-7-plus-4gb-ram/specs/3918.
Today I puted a Movistar SIM card wich in my country supports the Band 3 LTE, but my Nokia only gets 3G.
I don´t know if I have to enable something or whats is happening?
Can anyone helpme?