Database Develop

Jabra BT 800 and Broadcomm 3900 upgrade

:? Hi guys Just wondered if any of you guys are experienced problems with the Jabra bt800 working intermittently. Sometimes it works but most of the time it does'nt . I've upgraded to Broadcom 3900 and although blue tooth audio still crackles its not as bad.. The headset works alot better with my SPV C500.. Any ideas or experiences :?:

bt 800
hi i have xda2s with bt 800 working somtimes
i upgradeed to bt3900 but i see no change
somtime i takes 5-6 kye presss to unswerr a phone call
i do not have any audio problem the audio is ok

glad to know i am not the only one.. cheers for replying

did you try to contact jabra support???

I have a contact in GN Netcom so will have a chat with him next week and post the response here

thenks :wink:

:? Ok after talking to my contact in GN Netcom we have come to the conclusion (seings as it works fine with my Motorolla V3 and Nokia 6810 and 6820 and Siemens SK65) that the issue lies with the Bluetooth stack on my 2s.I did explain about this that i had upgraded it to the newer version and i personally believe they have not totally replicated the way the Bluetooth in the xda2s behaves the same as a normal bluetooth enabled phones.
I believe that because it works fine on most of the Manufacturers phones and the XDA's of this world are low priority to get it right.. I still believe it will be fixed in future Bluetooth upgrades on the xda2s.. doh still think that even though the display and buttons work intermittently it is still worth having for the DSP

The problem still exists!
I have Qrek 9090 and Jabra t800. Audio is very good and also on the good range.
BUT...
Main problem (even with Jabra 800 fix CAB file) is that I can't normaly answer the phone call. It takes about 5 or 6 times before I can reply the call. And also, it takes about 2 seconds before I can hear other side opponent.
I just wonder if you people have some kind of this problem. Any expirince. Could you please share with me some information.
I use Danghard rom 1.44 wit BT 3900.
Thanks a lot.
Leonid.

Update to Latest Ow2 ROM...the BT 3900 workd flaw lewssly.I hv tried BT with SE HBH 30/262 etc Blue Trek G2 and no problems....Also with Motorolla 810...
Moreover, Motorolla and Bluetrek supports voice dialing too :lol:

Thank you, but I'm talking about Jabra BT 800, cause it has so many features that I need. So, I would like that my Jabra headset will work fine with Qtek 9090.
Guys, please help! :lol:

Guys! Really need your help.
I used before another headset and didn't have any problems. But after I bought Jabra BT 800 I got serous problems. It really takes about 6 rings before I can answer a call. So, a lot of people just hang up and I have to call them back. :evil:
Nothing really helped. :evil:
I'm confused, cause I really like this headset and would like to use it.
HELP!
:lol:
Thanks!

hdubli said:
Update to Latest Ow2 ROM...the BT 3900 workd flaw lewssly.I hv tried BT with SE HBH 30/262 etc Blue Trek G2 and no problems....Also with Motorolla 810...
Moreover, Motorolla and Bluetrek supports voice dialing too :lol:
Click to expand...
Click to collapse
Voicedialing? How?
I have a HS810, it works fine, but how do you have voicedialing with it?

Moreover, Motorolla and Bluetrek supports voice dialing too
Voicedialing? How?
I have a HS810, it works fine, but how do you have voicedialing with it?
well I too own a Bluetreck G2R and a lot of crackling sound I have upgraded my BT stack to 3900 and most of my callers only hear the crackling so I have to swap my call to the phone and talk or have to call them back
also how do u use Voice dailing on the bluetreck for my xda IIs ???
can some one help me ?

Hi..use search,,,still this is how to do a voice dialling:
1) Install MS Voice command and assign a Hardware button(any) to activate the software so that it an listen to our commands.
2) Now, just press the "Call answer" button of your BT.By doing so it will activate the sound on your 2s.Then press that harware button of Voice command and speak...
It works flawlessly

Thanks
thank s
Ill def try going to Delhi, will return and sure thry Voice dial and re-install my BT stack to see if there is crackling sound still there
also how long can you try to distance your phone from the BT
I got one Jabra bt800
its superb and must say its a best one around with lots of features

Eehheh and you call that voice dialing?
If i had to do all of that to voice dial i could also press the button on the device and talk the name to it. And that would be one click less than with your solution.
I think the idea of voice dial with bluetooth is to keep the phone in your pocket and do the talking via bluetooth only.
hdubli said:
Hi..use search,,,still this is how to do a voice dialling:
1) Install MS Voice command and assign a Hardware button(any) to activate the software so that it an listen to our commands.
2) Now, just press the "Call answer" button of your BT.By doing so it will activate the sound on your 2s.Then press that harware button of Voice command and speak...
It works flawlessly
Click to expand...
Click to collapse

Re: Thanks
spread_smiles said:
thank s
Ill def try going to Delhi, will return and sure thry Voice dial and re-install my BT stack to see if there is crackling sound still there
also how long can you try to distance your phone from the BT
I got one Jabra bt800
its superb and must say its a best one around with lots of features
Click to expand...
Click to collapse
But can you tell me. Do you also have such problems with Jabra 800 as I have. The sound of BT and range is best. But what about time to answer the call. I press answer button hundred times to be able to speake with opponent.

Hi again guys.
Still can't solve my problem with BT 800.
I contacted with several companies but didn't get any correct answer.
Really don't know what to do.
Can you please tell what exactly this CAB file from FTP fixes cause nothig changed since I installed it.
Thank you and please foget me for bothering you.
Leo.

Gentlemen,
After a week or so exploring this forum and experimenting with my Logitech bluetooth hands free I've got a feeling that the only possible solution for the moment is to prevent the BA from getting into the sleep mode. Use ScreenLock or Mort Saver instead.

Solid_Lynx said:
Gentlemen,
After a week or so exploring this forum and experimenting with my Logitech bluetooth hands free I've got a feeling that the only possible solution for the moment is to prevent the BA from getting into the sleep mode. Use ScreenLock or Mort Saver instead.
Click to expand...
Click to collapse
Well, thank you.
But as I understood from different threads in forum this is one way.
But... I'll kill battery of PDA very quickly. Really don't think that it's a good idea.
People from Jabra told me that new firmware will come soon and will help to solve this problem.
So.. I think that it's not the fault of PDA or ROM... :?

ISSUE- Voice not over BT headset

Guys,
I understand you are concentrating on the WM5 upgrade and other interesting projects. Maybe, you can take a few moments out to share some of your experience with a newbie....
I am using TuMa v1.5 WM5. I am able to use BT really well (of course, the issue of BT turning off with device on stand-by remains).
I am able to connect with my TomTom and with my Cardo Scala BT headset. The problem is this: If I use the headset to initiate a call using the BT headset (by double-clicking the headset buttom to redial or by pressing the BT headset button to voice dial) the call goes through as intended BUT my voice does not go over the BT headset to the other party. Also, the voice from the other party can be heard over both, the BT headset and the phone. This problem DOES NOT appear if I make the calls using the phone with the BT headset connected to it.
Please advice. Thanks for your help and for a great forum, especuially for us newbies.
Sagar

bt headset
Select use for phone only. Perhaps then it works.
The headset is connecting to device audio, not phone audio.

sgrbhtngr said:
... I am using TuMa v1.5 WM5.
Click to expand...
Click to collapse
Really? ... Wow! I'd better update my firewall again.
How'd you steal that version off my machine! 8)
For the sake of argument, I'll presume you're using v1.4, since it has the most up to date BT elements in it, but v1.3 should be very stable for BT communications as well.
sgrbhtngr said:
I am able to use BT really well (of course, the issue of BT turning off with device on stand-by remains).
Click to expand...
Click to collapse
Yeah ... I'm still looking into this. I hope to have this working through the Microsoft Stack. The Widcomm one is still looking like a "last resort", and it really is a bit more 'ugly' to use - especially in it's compatibility and (from what I can see) reliability.
sgrbhtngr said:
I am able to connect with my TomTom and with my Cardo Scala BT headset. The problem is this: If I use the headset to initiate a call using the BT headset (by double-clicking the headset button to redial or by pressing the BT headset button to voice dial) the call goes through as intended BUT my voice does not go over the BT headset to the other party. Also, the voice from the other party can be heard over both, the BT headset and the phone. This problem DOES NOT appear if I make the calls using the phone with the BT headset connected to it.
Click to expand...
Click to collapse
Hmmm ... this sounds like there is still some form of a headset audio routing issue as vastloper indicates. Try ensuring that only one profile is active at the time (headset probably).
I will shortly have all the gear I need in order to properly test this myself too.
FYI: I've now recently purchased the following devices:
- SIRF Chipset Bluetooth GPS Unit
- Motorola HT820 Stereo Bluetooth Headphones
- Jabra BT 150 Headset
- Jabra BT 330 Headset
- BlueTrek X1 Headset
And now have access to another Jabra BT 500 Headset, and another pair of Bluetooth Stereo Headphones.
So ... shortly, I will have the ability to REALLY test everything out myself in the Bluetooth realm.
Now all I need is 5 ears, and enough pockets to carry all this stuff in.

The process I used....
Thanks, vastloper and Tuatara.
Tuatara- genius AND a sense of humor... thats a rare combo! We all appreciate your efforts in bringing WM5 to us. You go out of your way to make it better for us. Thanks.
Regarding the issue on this post, just FYI- I used MOHDWADEA's process for voice command over BT: http://forum.xda-developers.com/viewtopic.php?t=42923&highlight=
Could this cause the problem? Does this light any light-bulbs, any 'aha' moments? Please let me know- I greatly apprecaiet it.
Thanks,
Sagar

Re: The process I used....
sgrbhtngr said:
Thanks, vastloper and Tuatara.
Tuatara- genius AND a sense of humor... thats a rare combo! We all appreciate your efforts in bringing WM5 to us. You go out of your way to make it better for us. Thanks.
Click to expand...
Click to collapse
You're welcome ... remember it is a 'selfish' undertaking too. I want my phone to [email protected]$#@!#!! work for me ... but it's taking some work to get it to that point.
sgrbhtngr said:
Regarding the issue on this post, just FYI- I used MOHDWADEA's process for voice command over BT: http://forum.xda-developers.com/viewtopic.php?t=42923&highlight=
Could this cause the problem? Does this light any light-bulbs, any 'aha' moments? Please let me know- I greatly apprecaiet it.
Click to expand...
Click to collapse
It's possible. I'm not entirely certain what this will change in the configuration (or versioning of replaced DLL's), but it is possible that there are compatibilty issues. Since I don't have a device with TuMa v1.3 on it anymore (one's on Alpha v1.5 testing, and the other is a AKU2 'brick' attempt at the moment), I can't even find out for you.

Bluetooth / Alpine KCE-300BT / Headunit

hello Everybody,
first of all:
no problem with KCE-300BT while a2dp after done the registry fix (Value 60). thanks to this forum!
but now there is one problem:
when i want to update my phone-book after pairing, my radio is always displaying "updating" and no more continue.
do you know, if the kaiser has problems using the bluetooth comunication between the KCE-300BT (or other bluetooth adapters) ?
is there a fix/software for this problem??

garfield2412 said:
hello Everybody,
first of all:
no problem with KCE-300BT while a2dp after done the registry fix (Value 60). thanks to this forum!
but now there is one problem:
when i want to update my phone-book after pairing, my radio is always displaying "updating" and no more continue.
do you know, if the kaiser has problems using the bluetooth comunication between the KCE-300BT (or other bluetooth adapters) ?
is there a fix/software for this problem??
Click to expand...
Click to collapse
When they first pair after getting in the car, leave it a few minutes before accessing, this works for me. If I try to access my phonebook straight away I get the same problem.
What headunit do you have?

ewans said:
When they first pair after getting in the car, leave it a few minutes before accessing, this works for me. If I try to access my phonebook straight away I get the same problem.
What headunit do you have?
Click to expand...
Click to collapse
okay, thanks for this hint!
i'll try it tomorrow
i'm using the headunit idax-100 us-version directly imported

garfield2412 said:
hello Everybody,
first of all:
no problem with KCE-300BT while a2dp after done the registry fix (Value 60). thanks to this forum!
but now there is one problem:
when i want to update my phone-book after pairing, my radio is always displaying "updating" and no more continue.
do you know, if the kaiser has problems using the bluetooth comunication between the KCE-300BT (or other bluetooth adapters) ?
is there a fix/software for this problem??
Click to expand...
Click to collapse
Hi there, I am having a problem with my BT620s and was wondering what you were talking about with the registry fix and would it have to do with the sound cutting in and out periodically? I have searched this forum and have also asked in a new thread but ignored, but I guess I don't know how to search very well. How do you edit the registry?

Shinare said:
Hi there, I am having a problem with my BT620s and was wondering what you were talking about with the registry fix and would it have to do with the sound cutting in and out periodically? I have searched this forum and have also asked in a new thread but ignored, but I guess I don't know how to search very well. How do you edit the registry?
Click to expand...
Click to collapse
here you are:
http://forum.xda-developers.com/showthread.php?t=262119
editing the registry with: resco registry explorer
but: my problem with my alpine - didn't solve it.. always displaying "updating"
is there any problem with to many contacts? do i have to wait more than 20 minutes at the first time?
anybody out there with an alpine stereo too??

garfield2412 said:
here you are:
http://forum.xda-developers.com/showthread.php?t=262119
editing the registry with: resco registry explorer
but: my problem with my alpine - didn't solve it.. always displaying "updating"
is there any problem with to many contacts? do i have to wait more than 20 minutes at the first time?
anybody out there with an alpine stereo too??
Click to expand...
Click to collapse
okay.. getting closer to the problem!
--> PBAP Phonebook Access Profile Zugriff auf Telefonbuch (nur lesend)
does anybody know how to enable this on the kaiser?
mybe a soloution here: http://forum.xda-developers.com/showthread.php?t=377539&page=2 ?
but strange: http://www.htcwiki.com/page/ATT+TILT?t=anon
is displaying that kaiser supports this ? how to activate? or a problem with the KCE-300BT ?

very strange...
--> got access once!
was able to go in the dial list, recieved calls etc.
exited telephone function and tested it once more: same problem "updating"
no one here with car bluetooth and a kaiser? maybe with an alpine stereo and the kce-300bt ?

Solved the problem
using: http://www.jetwaremobile.com/bthfx/support.htm now !
after installing this software: no more problem with the "updating" problem !
my phone book is available after maximum 1 minute !

Dur - you just reminded me that I had installed the jetware extension! Sorry, I could have saved you some time.

Quick id10t question...
Sorry guys but I jumped in this conversation a little late.
I have an HTC 2125, 3125 (WM 5.0), and am contemplating purchasing the Tilt if it would make any difference.
With the registry fix and the Jetware software, will I have full compatibility with the KCE-300BT? Streaming music and all?
(using Alpine CDA-9885 head)
Thanks.

Bodacious said:
Sorry guys but I jumped in this conversation a little late.
I have an HTC 2125, 3125 (WM 5.0), and am contemplating purchasing the Tilt if it would make any difference.
With the registry fix and the Jetware software, will I have full compatibility with the KCE-300BT? Streaming music and all?
(using Alpine CDA-9885 head)
Thanks.
Click to expand...
Click to collapse
streaming music --> registry-fix and no more stuttering while playing via a2dp
full access to your phone-book --> install the jetware extension

Hi people! Sorry if i open this thread again. I've got a P750 (instead of Kaiser). Installed jetware and the first time it worked (synchronizing the phonebook to head unit).
But the second time i tried again and it always tells me "updating". Do I need to do other registry entries together with Jetware to enable phonebook?

Luk4S said:
Hi people! Sorry if i open this thread again. I've got a P750 (instead of Kaiser). Installed jetware and the first time it worked (synchronizing the phonebook to head unit).
But the second time i tried again and it always tells me "updating". Do I need to do other registry entries together with Jetware to enable phonebook?
Click to expand...
Click to collapse
windows mobile 6.0 or 6.1 ?

garfield2412 said:
windows mobile 6.0 or 6.1 ?
Click to expand...
Click to collapse
6.1 original update from Asus

Luk4S said:
6.1 original update from Asus
Click to expand...
Click to collapse
if you can believe in microsofts promise http://www.microsoft.com/windowsmobile/en-us/meet/version-compare.mspx the "pbap" is already installed on wm 6.1
(go to the link an then look at section "bluetooth")
but unfortunately WM 6.1 pbap (phone book access profile) doesn't work with my alpine.
didn't try it with jetware until now, sorry

garfield2412 said:
if you can believe in microsofts promise http://www.microsoft.com/windowsmobile/en-us/meet/version-compare.mspx the "pbap" is already installed on wm 6.1
(go to the link an then look at section "bluetooth")
but unfortunately WM 6.1 pbap (phone book access profile) doesn't work with my alpine.
didn't try it with jetware until now, sorry
Click to expand...
Click to collapse
yes it works with jetware. i've discovered that it works only after you've made or received a call.

Bodacious said:
Sorry guys but I jumped in this conversation a little late.
I have an HTC 2125, 3125 (WM 5.0), and am contemplating purchasing the Tilt if it would make any difference.
With the registry fix and the Jetware software, will I have full compatibility with the KCE-300BT? Streaming music and all?
(using Alpine CDA-9885 head)
Thanks.
Click to expand...
Click to collapse
Looking at buying the new KCE-350BT which is out now (unfortunately still not properly working with Polaris + WM6.0), just wanted to know do i still need to do this registry fix if i'm running Jetware.
Thanks

Tested the KCE-350BT in store and couldn't get it to work even with JetWare. It did download all the contacts at one point, but stuggles to pair every time and doesn't look like it would work very well at all.
Any other programs,registry fixes or ROMs to try? (to convert the OBEX format to PAB in the phone itself)? JetWare is a bit cumbersome having to browse using file explorer, doesn't even create any shortcuts etc.
Thanks in advance.

Luk4S said:
yes it works with jetware. i've discovered that it works only after you've made or received a call.
Click to expand...
Click to collapse
Bump. just wondering is WM 6.1 any better than 6.0 in terms of getting this to work properly. Working only after making or receiving calls sounds pretty annoying. i didn't find jetware to work at all really.

g-rig said:
Bump. just wondering is WM 6.1 any better than 6.0 in terms of getting this to work properly. Working only after making or receiving calls sounds pretty annoying. i didn't find jetware to work at all really.
Click to expand...
Click to collapse
Just wondering... Did you ever get this to work with your Polaris? I have one too and I would like it to connect to my Alpine IVA-W502R using a yet to be purchased 350BT. Should I keep my money or can we get it to work using Jetware / WM6.1 / regfixes or whatever needs be done?
Tnx in advance

Bluetooth A2DP

Hi Guys,
any of you experience losing system sound after using A2DP? I have tested several times and this happens without fail.
After using A2DP the sound output seems to be unable to switch back to the phone speaker. Meaning that no ringing when calls comes in, no sound when playing music etc....
The only solution is to reset the phone then it'll be back to normal.
Another problem is with the camera. Also after using A2DP you can use the camera. It's just a blank screen with the camera icon in the center. This also will be resolved after a soft reset.
any help is much appreciated.

I have this issue when using HTC's music player. No issue if I use WMP tho.

I have this problem too.
Also when using AVRCP with the HTC player, the commands are sometimes send to the windows media player.
Anyone else ?

This is now the 3rd thread on this topic... search and contribute to one of the others.

Radio and A2DP?
Has anyone tested if it's possible to use and listen to the built-in RDS radio with a Bluetooth A2DP headset? Thx.

Anybody can confirm that A2DP problem occurs only with HTC player?

hate diamond
love and hate relationship with diamond now
hah
anyway... i had yer a2dp problem too
and it was worse.. i end call.. the sound switches to the speaker.. so can u believe it.. in the train.. everyone hears my punk music........ so not cool
for yer case... i did sth and it worked
when you wish to terminate yer a2dp headset.. do the following:
1. off yer headset
2. turn off bluetooth
by doing 1 followed by 2.. it sort of "safely removes" the headset.. try it.. i hope it works for u

emilceteras said:
Anybody can confirm that A2DP problem occurs only with HTC player?
Click to expand...
Click to collapse
yes, this problem occours only with HTC Music player; now I removed it from TFL3D and I play my music with WMP, I finally fix it!!!

diego1810 said:
yes, this problem occours only with HTC Music player; now I removed it from TFL3D and I play my music with WMP, I finally fix it!!!
Click to expand...
Click to collapse
Works for me too

citats said:
This is now the 3rd thread on this topic... search and contribute to one of the others.
Click to expand...
Click to collapse
Agree, though there seems still no 1 fits all solution by linking A2DP - AVRCp to another player like Coreplayer - Pocket player.
Hope at least one thread of 3 will seek attention of a reg tweak expert

ceevee369 said:
Agree, though there seems still no 1 fits all solution by linking A2DP - AVRCp to another player like Coreplayer - Pocket player.
Hope at least one thread of 3 will seek attention of a reg tweak expert
Click to expand...
Click to collapse
I think that is a big issue on Diamond and that some experienced dev must have it in mind. In other thread (don't remember it now) , somebody mailed HTC for this problem and the answer was that this isue is because he don't use HTC accesories.Bluetooth and a2dp are universal standards and have nothing to do with HTC accesories.

I suffered this yesterday. Was listening to music, recieved a call - answered call, ended call - music continues out of phone speaker!
Also whenever i disconnect from bluetooth stereo - no ringtones, no alerts can be heard. There is another bug if vibration is involved , it continually vibrates and doesnt stop. You HAVE to soft reset.
This is a serious problem. Why doesnt HTC test these things?

have u tried the rom 1.93?

Im using ROM version 1.37.401.3 WWE

Baronic said:
have u tried the rom 1.93?
Click to expand...
Click to collapse
I flashed yesterday with 1.93. After receiving a phone call the music continued on the phone speaker (not in headset) but my phone doesn't mute . I had no enough time to test more but I hope that ,,muting'' problem is solved in this rom

Im using the ROM Diamon Project V2 and it works fine. I use A2DP & TF3D Music Player quite alot and have not had any issues whatsoever.

A small surprise for all.
Put this application into windows\
tap once to activate it and tap again to configure.
in the configuration menu, set avcrp to the music player that you need.
for my case, i use gsplayer. and viola ...
this is what i used to do on my non-touchflo3d diamond.
u can try and see if it works for you.

I tried it on my german HTC Diamond but without success ..I used as path
"\Interner Speicher\programme\coreplayer\player.exe"

I also have this problem but not always!

Ruff-Ruff, You could make the difference here.
Will try to link with Pocket Player. if that works, than you're my Chinese hero ;-)

Request for ROM with HTC Sense and bluetooth AVRCP working in AudioManager

I own a bluetooth stereo headset, and I'm used to controling the music player using the headset buttons (bluetooth AVRCP) since I had a Touch Cruise.
Now, for the Xperia, I've been testing some ROMs (Touch X 10.8.2, latest Valkyrie releases, both Energy ROMs and Jack's V3xx and V4xx) but none of them gave me AVRCP in HTC's player (AudioManager), only in WMP.
I also tried some suggested fixes (the one in Jack's thread, Itje's BlackStone Audiomanager cab, extracted audiomanager.exe from Daran's BlackStone TouchFLO 3D cab), but either I get a certificate error or they don't work.
Is there a ROM with latest TouchFLO 3D (HTC Sense) and with bluetooth AVRCP working in Audiomanager? Or an actually working fix?

I gave up on this a long time ago.. It seems that it's just not working on Xperia. But of course, i would be interested in a solution, too

Wow, new ROMs lack this core functionality? What about when playing music from the panel manager?

I'll jump on here too, been waiting a looong time for this one. What is the issue exactly? Is it the OS the app? Some minor improvements under windows media player makes me believe its the app but then not so much when i havent had any success since 6.0....

I tested and it definitely working w/ my rom (make sure you copy w/ Resco Explorer). But by enable this w/ the new manila will cause your playlist lost after reset.

Something that is also annoying is that the Xperia automatically connects the bluetooth headset, but doesn't automatically connect the A2DP to the same device.
So everytime I step in the car, I have to go to bluetooth settings to click on the XPLOD device (that's already connected) to connect the A2DP. Is there a fix for this?
This combined with the HTC player not working with AVRCP, means that I have to get up 10 minutes earlier to listen to music in the car when I go to work

This thread got me looking again and for those with issues check out the On The Road panel . Fully working AVRCP plus a cool panel to boot!

jackleung said:
I tested and it definitely working w/ my rom (make sure you copy w/ Resco Explorer). But by enable this w/ the new manila will cause your playlist lost after reset.
Click to expand...
Click to collapse
I have tried, but with Total Commander, not Resco Explorer.
With your fix I get a certificate error, but I'll try again.
fu-raz, this automatic connection depends on the bluetooth device. Example: I had two different bluetooth headsets. With the first, when I connected it to the phone, it was connected as a handsfree, and I myself had to go to bluetooth, advanced, and set it as a stereo headset.
With the last, at first it was connected as a handsfree, but I only had to press the "call" button on the headset control, and then it was connected as a stereo headset.

jackleung said:
I tested and it definitely working w/ my rom (make sure you copy w/ Resco Explorer). But by enable this w/ the new manila will cause your playlist lost after reset.
Click to expand...
Click to collapse
Could you please be so kind and attach your working AudioManager.exe or cab or sth.? Tried many by copying into Windows folder with resco and always got the not signed error.

I did test jackleung fix, and got a certificate error.
Any other suggestions?

phoenixnr said:
This thread got me looking again and for those with issues check out the On The Road panel . Fully working AVRCP plus a cool panel to boot!
Click to expand...
Click to collapse
I will look into this!
Phantom1275 said:
fu-raz, this automatic connection depends on the bluetooth device. Example: I had two different bluetooth headsets. With the first, when I connected it to the phone, it was connected as a handsfree, and I myself had to go to bluetooth, advanced, and set it as a stereo headset.
With the last, at first it was connected as a handsfree, but I only had to press the "call" button on the headset control, and then it was connected as a stereo headset.
Click to expand...
Click to collapse
The thing with my device is, it acts as both. It's my car radio. It sets up a headset AND a stereo headset connection. The thing is, one connects automatically, the other doesn't. I will see if I can use the on the road panel if I can find it!

On The Road panel does not help me.
Yeah, I know Xperia is capable of doing AVRCP in other applications (e.g. WMP).
What I want is AVRCP working in TouchFLO 3D music tab, that is, HTC Audiomanager.

I am busy w/ my new kitchen now. Let me build a 6.5 med rom w/ AVRCP later to prove it's working ;p (but be aware the bug I pointed out)

jackleung said:
I am busy w/ my new kitchen now. Let me build a 6.5 med rom w/ AVRCP later to prove it's working ;p (but be aware the bug I pointed out)
Click to expand...
Click to collapse
Ok, I'll be waiting for it. Hope it works.

Here you go. This rom is just a prove of concept that AVRCP does work on MY rom with my fix (not guarantee to work w/ others). And it does has bug that playlist cannot survive after soft-reset.

jackleung said:
Here you go. This rom is just a prove of concept that AVRCP does work on MY rom with my fix (not guarantee to work w/ others). And it does has bug that playlist cannot survive after soft-reset.
Click to expand...
Click to collapse
Hi Jack.
Yeah, it really works! I don't know about the playlist-softreset bug (can you explain it to me?), but at least I have AVRCP working in music tab.
I wonder if other people can cook this fix into their ROMs as you did. Do you know if it's possible?