i would need some help how can i upgrade with my sd mini card if some one could help i could get my qtek working again and that would just be the best thnk right now so plz if there is some one help me
You need to get someone with same G3/G4 of Wizard to dump his/her Wizard ROM to the card using mtty.
ok and how i dump it can u help me or give me a site where i can read how to do it i know that the only way is reading but if you can give me a site than you are the man/woman :d
i am using qtek 9100 g3 if some one could find my the file or give me a place or a link where i could/can find it i would be sooo happy my phone is dead i can use it and i realy miss it so please
sry for the mistakes on the last post i am waisted
What you need is a MiniSD of at least 128MB (NOTE - All existing data inside will be wiped), the mtty program, and 2 CID-unlocked Wizard (One is your wizard, other is the wizard that dump ROM, both MUST be CID-unlocked first).
mtty can be downloaded at http://forum.xda-developers.com/download.php?id=9864
To dump the ROM, first kill the wcescomm.exe process on your PC or disable USB connection in ActiveSync.
Then restart the healthy wizard in BootLoader mode (Camera+reset), run mtty.exe and select \\.\WCEUSBSH001 as port.
After connected, enter "r2sd all", then ALL ROMS (IPL, SPL, Radio, OS) will be dumped to the card (If you only want OS, you may issue "r2sd os" instead).
After the USB> prompt returns, the operation complete. Put the card in your Wizard and reboot it, then it will have a prompt telling you to press a key for SD recovery, follow the instruction then it should be fine.
tnx my man your the best now i need a second wizard tnx
Search for OS dump for installing from sd-card
He man,
I have the same problem. After trying to get a dutch WM6 in my Wizard I ended up with a white HTC screen with the IPL/ SPL radio and OS (prophet 3.0xxxx) listed.
Don't know what happened: i was only surfing while loading the new OS!
So could somebody post his ROM (dump) so we can load from SD-card?
Thanx in advance!!
Jedeve said:
He man,
I have the same problem. After trying to get a dutch WM6 in my Wizard I ended up with a white HTC screen with the IPL/ SPL radio and OS (prophet 3.0xxxx) listed.
Don't know what happened: i was only surfing while loading the new OS!
So could somebody post his ROM (dump) so we can load from SD-card?
Thanx in advance!!
Click to expand...
Click to collapse
Its not possible to post any 'dump' rom or upload it,you can only make a dump or back up your previous rom on to a miniSD card or sdcard to reflash it to your phone.Read and try to understand the method already described in the above post by starkwong
Cheers!
Read and understand
I did read and thought I understood.
So when you dump the Rom of a wizard on the (or a) sd-card you end up with files on this card isn it?
So I thought if I can use the dump of a second Wizard somebody could do this and post me those files. I would copy these to my sd-card (via explorer in a other device).
Then I was planning to stick this sd-card into my bricked Wizard.
It is the same procedure as Thankwong described, with the difference that i am copying the files to my sd-card.
If this will not work I do not undertsand why not...
Jedeve said:
I did read and thought I understood.
So when you dump the Rom of a wizard on the (or a) sd-card you end up with files on this card isn it?
So I thought if I can use the dump of a second Wizard somebody could do this and post me those files. I would copy these to my sd-card (via explorer in a other device).
Then I was planning to stick this sd-card into my bricked Wizard.
It is the same procedure as Thankwong described, with the difference that i am copying the files to my sd-card.
If this will not work I do not undertsand why not...
Click to expand...
Click to collapse
Thats what not possible,its not possible to dump the rom on a sdcard and then post the file from a sdcard.only this is possible if you have a friend with a similar phone and he makes a dump of his rom on the sdcard and you insert it in your phone to back up that dump rom on your phone,ok
solved the problem.
Hi all,
I've got a great tip from a specialist! Here's what I did:
step 1: load the battery to the max.
step 2: Put the Wizard in Bootload ( pressing power and camera button, hold camera for at least 3 sec. until you have a 3-colour screen)
step 3: connect Wiwzard to pc with usb cable
step 4: Use Draven187's ROM (in my case the 3.12.2.0)
step 5: Chose Vista Rom update (though I have XP)
step 6: Follow instructions.
step 7: HAVE FUN
It worked in my case!
So despite you cannot connect to your phone the Vista update tool can connect and update the rom.
I'm no specialist so I'm not sure it helps in all cases...
ALL CREDITS TO: DRAVEN187!
nope still error 260
this aint working for me
Related
Guys, i need some help. Recently i came across the rom update for my xda iis, so i decide to take it out of my drawer and see if i can update it with HELMI_BA_WM6_R0_Public. I followed all the steps and try to upgrade it, after i click on HELMI_BA_WM6_R0_.exe, my xda iis restart on cradle and after that nothing happen. I notice it only appear on the top with the word "serial" and the bottom "v2.06". I have tried in vain to get it working again, please try to help as im very new to this. Im using window Vista.
since apparently, you are not that experienced in flashing your device, i would recommend you use windows xp to flash your device.
then you have a look at this wiki wizard:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardUpgrade1_WM2003SE0
this is a step by step instruction on how to upgrade from wm2003 to wm6.
please follow it precisely, even if you don't see a point in certain steps, they are all important!!!
if you, however, don't understand a step or a phrase, feel free to re-post, and i will explain it to you in more detail.
have fun with the upgrading, one word of advise: take your time, the first upgrade with storage resize radio upgrade, sim unlock and other stuff can last an hour or two (not the upgrade itself, but the process you go through). when you remember the steps and feel like you want a different rom, after testing this one, all you have to do is donload a "nk.nbf" file and flash it, and the entire update takes you 5 minutes then
Hi Chef_tony, thanks for the reply. I went to the link u gave me and from the 1st step on im stuck. It ask me to download both the unlocker and Repart and place it on the phone, but i cant do anything with the phone except for the "Serial" on top and "V2.06" below, it does change to "usb" when i cradle it. please help. thanks again
ok, then at that point you are stuck in boot loader, that happened to me too.
the reason for that might not be that interesting to you now, but it is because vista in the middle of the flashing process vista thinks it needs new drivers, downloads them and then it disconnects the device, something that shouldn't be done while flashing, as everyone knows.
these wiki links explain how to flash from vista using modified drivers, but i wanna tell you in advance, that i personally never got it running, i always use a windows xp machine:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardUpgrade4_Vista
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardUpgrade4_Vista_Pic
so, still i want to state that the best way to flash is a xp computer, if you have access to one, use that to flash your original shipped rom first, to resize the storage (first wizard step) afterwards.
theoretically, a virtual machine, running xp would also work, if you still have an xp cd lying around, you can download virtual pc 2007 from microsoft, it is free and you just need a short time to set up a virtual xp machine, because i can guarantee you, you will flash more than one rom, once you started on the topic.
remember, you need to flash your shiped rom, then you want to flash the helmi rom, then maybe a rom update and probably you are not staying with that rom forever, since it is wm6, there is also wm6.1 and wm6.5 to follow that.
what i want to say is:
- try the flashing with vista option described in the wiki links above
- if that doesn't work, try to get to an xp computer and follow the steps
- flash your original shipped rom first
- then the wiki wizard steps in again
Problem is solve, thank you so much chef_tony. my next question is...where can i get wm6.1 rom as all the link i had is dead
according to another user, this thread's links are still working:
http://forum.xda-developers.com/showthread.php?t=403421
but it does not contain office. (you can still try other office download links, if you need it)
just by the tiny size of the extrom i would say there is hardly anything contained, but anyway, that is a rom i used too, and it is quite nice, also look up IOLITE stuff in this forum for extra apps.
make sure to repost if everything went to plan
I found a working wm6.1 pro on another website and its working great! It contain office as well. Thing now is i didnt adjust the memory and i didnt have enough space to install every software that i had
This is the link http://www.4shared.com/file/66810499/8a61be24/HTC-BA5220758WWE_v302_25M_PP-16M_RAMdisk_a.html?s=1
By the way chef_tony, you happen to have any idea how to open up BA, cause i would love to clean it up on the inside.
1. the thing is, the storage resize is important for 2 reasons:
- sure, with the resize you woulld have 16mb more storage memory for installing programs and storing stuff
- you still have your original extrom on the device, which is not compatible with newer roms, meaning, instead of simply copying the extrom to an sd card to have a basic setup and installing programs you need to install cabs manually
which is why i said to follow the steps precisely, now you have 16mb of space you simply can't access from wm6 at all, and for a resize you'd have to go back to wm2003 first but give your rom a try first, maybe it is not the perfect one for you after all, then you still have the opportunity to re-flash.
2. i am glad you found a valid link, many people post their roms to hosters that take it down after a while, expecially when there are no more downloads of that item, and so, many links posted here half a year ago are not working anymore, which is sad, since there are still a lot of people, including you, that would like to go to wm5, wm6 or wm6.1 and not just the newest wm6.5 builds, but, whatever, you found your rom and hopefully kept the files stored on your pc for future reflashing...
3. there are two basic disassembling guides for the BA:
- the official service manual (also good for repairs, since they explain each step):
http://www.4pda-service.ru/netcat_f.../BLUE ANGEL/HTC_Blue_Angel_Service_manual.pdf
- the manual made by a forum user:
http://www.land-of-kain.de/ppc/mda3/disassembly/
i am glad it all worked out for you so far and you will realize that this old device has a lot of potential, when you keep it up to date (and clean ).
Thanks you so much for the help. I'll try to update if the link is dead someday, by the way..i have 43mb storage and 84mb programme, is that good or bad?
the program memory is normal, but the storage should be 16 mb more, so instead of 43.XX you would have 60.30mb.
that is the extrom resize mentioned before.
- you need to flash your original rom for that
- then copy the "xda-developers unlocker" and the "repart_doc.exe" to your device. (attached below)
- you install the extrom unlocker
- then you go to start menu and extrom unlocker
- you execute "unhide"
- then unlock
- then start the repart_doc and set the size to 128kb
then you can lock the extrom and hide it again.
maybe in that process there is a soft reset required, i don't remember.
the reason why you do all that is because the extrom memory is hidden and locked and contains a bunch of cabs, that install automatically, when you hard reset the device.
so after that, you can reflash your wm6 rom, and you'll see, that after you resized and formatted that space, your memory dialogue will show 60.30mb of storage memory (plus it gives you the opportunity to install wm6 extroms from the sd card).
I got the O2 Xda IIs Model PH20B and now upgraded to ROM Version 6.50.28WWE. Radio Version 1.12.00, Protocol Version 1337.42. The CPU is PXA263 wuth 400 MHZ and 112MB RAM. Flash Chip type 28F128K3
The office mobile doesn't work anymore, the things that haven't worked before (like PSSHutXp, TomTom etc) don't work. It can't be connected to any computer not by Active Sync on Windows 2k or XP, and not with Windows Mobile on Vista. I have a lot of icons duplicated on the desktop with (1) behind the name aka Calendar and Calendar (1) and can't get rid of them.... what can I do? Can any one help me please? I am ready to throw that thing out of the window!
Thanks a lot in advance
.
I suggest you to do a hard reset...
Have you dit it when you was upgrading?
Because after upgrade you have to do it, to avoid problems with some pieces of applications , that have been left in your memory...
thanks for your reply, much appreciated. Yes I did hard reset it, it won't even use the Extrom on the SDCard to give me office or anything, even it said the cabs are installed. Stupid thing!
I now went back to the original O2 crap old ROM and search for 6.1 but I can't seem to find one that works, the ones I found on here don't install right away but go through syncing, which mine won't so it keeps saying the device doesn't respond lol. I think I seriously give up soon and just throw it out I had enough, and I am good with computers etc usually, I build them and all, just I never had a PDA before.
Anyone know something?
if it didn't use the extrom from the sd card you probably still have the internal extrom in the device and forgot to format and resize it before you first upgraded to wm5 and above. what you need to do to get rid of all that old crap is:
1. downgrade to your shipped rom, remember, now that your device is WWE, you need to use MAupgradeut_noID and botloader to avoid country id and device id errors.
2. download xda-unlocker.cab and repartDOC.exe and put them on an sd card. install the unlocker.
3. run the unlocker by going to the start menu, EXTROM tools, click "Unhide" then "Unlock"
4. run repartDOC and set the size to 128kb
5. run the unlocker again by going to the start menu, EXTROM tools, this time click "Lock" then "Hide"
6. now your device does not have the internal extrom anymore, meaning you have 16MB more storage capacity and you can use extroms coming from the sd card.
7. then flash back the new rom, say wm6.1, again using the MAupgradeut_noID and bootloader mode.
8. when done, perform a hard reset, notice that the procedure for hard resetting changed, (press reset+power+record+camera)
9. in the menu appearing, the options ARE set:
Enable KITL: YES
clean registry hive: NO
format storage: NO
using the camera and record button, flip all the settings, so it says:
Enable Kitl: NO
clean registry hive: YES
format storage YES
10. confirm with the mail button, your screen turns white, and after some time, the device boots and installs the extrom from the sd card.
that is the procedure to go through, when first upgrading to wm5 and above and since your device made special problems, my wildest guess would be, that you forgot to resize the extrom, which is the reason the sd card's extrom was not loaded. plus you probably performed no hard reset or did it wrong, which is why the device was filled with garbage even after flashing a new rom.
if that manual was to fast, or you didn't get any of the things above, there is a wizard (assistant, not the device) in the wiki, to guide through the upgrade process, there you will also find the download links for the mentioned unlocker and repartdoc:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardUpgrade1_WM2003SE0
that link is already one step into the problem and starts with the extrom resize, assuming that you flash your shipped rom first, and need no help doing that.
remember: you cannot resize your extrom from wm5 and above, for your device to run properly, you need to go back to wm2003 first.
have fun and good luck with that
Thank you very much Chef Tony. I was willing to put it up for sale but I will try what you suggested once again, even I am sure I ran through it all and did it, but it doesn't hurt to try it again. If I am still too stupid to use the Blue Angel, or still don't get along with it, I can always sell it afterwards.
THANK YOU VERY MUCH
UPDATE:
I have done it on my XP computer this time, not Vista, and it worked. The other thing I did wrong, no laugh at me if you want LOL, but I am a novice and have my blonde moments , and never did this before, I unrared ALL the files in the EXTROM Folder... this time I only unrared the main folder and put them all on the card as they were inside that unpacked EXTROM Folder. Works like a charm now and the programs are installed and I can use it... saves me a LOT of money as I was ready to sell everything I have to sell to get the iphone, now thanks to you I can use the XDA IIs as it should work.
I owe you one! VIELEN LIEBEN DANK FUER DEINE HILFE.
Hi can anyone help me, i installed windows mobile 6.5 on my touch htc and now its expired i cant do anything to literally i cant even connect it to the computer to install new version ((
Someone heeeeeeeeeeeelp
teonik_ge said:
Hi can anyone help me, i installed windows mobile 6.5 on my touch htc and now its expired i cant do anything to literally i cant even connect it to the computer to install new version ((
Someone heeeeeeeeeeeelp
Click to expand...
Click to collapse
remove remove
teonik_ge said:
Hi can anyone help me, i installed windows mobile 6.5 on my touch htc and now its expired i cant do anything to literally i cant even connect it to the computer to install new version ((
Someone heeeeeeeeeeeelp
Click to expand...
Click to collapse
what rom u flash? what u can do go to bootloader and then flash a new rom see my sig. the guide by CRACKWHORE
Hi , everyone.
I have such problem. Today my WinMob 6.5 Expired.
I know how to flash from storage card - it's not a problem. But I don't want to lose information. Is it possible to:
1) Create a custom ROM, which changes only one file (with time bomb) just like Boot Screen change o radio ?
2) access to device storage (Not SD Card) without activesync?
3) make some ROM-file which change only current time?
4) Flash a device with ROM but not to lose any information ?
5) Update WinMob on device ?
or everything is no dice?
Ptitz said:
Hi , everyone.
I have such problem. Today my WinMob 6.5 Expired.
I know how to flash from storage card - it's not a problem. But I don't want to lose information. Is it possible to:
1) Create a custom ROM, which changes only one file (with time bomb) just like Boot Screen change o radio ?
2) access to device storage (Not SD Card) without activesync?
3) make some ROM-file which change only current time?
4) Flash a device with ROM but not to lose any information ?
5) Update WinMob on device ?
or everything is no dice?
Click to expand...
Click to collapse
ergh, no. Look like you'll have to flash new rom mate
teonik_ge said:
Hi can anyone help me, i installed windows mobile 6.5 on my touch htc and now its expired i cant do anything to literally i cant even connect it to the computer to install new version ((
Someone heeeeeeeeeeeelp
Click to expand...
Click to collapse
here is my opinion: (You must update to HSPL 1.56 before doing this, it's very important and make sure your battery is at least 30%)
First you need to have the Micro SDcard which help you connect to your SD card and your PC
Second, please make sure you had formatted your SD card first by FAT32 (right click on "Secure SD card" disk and choose Format--->Fat32---> start (you can put all of files in your SD to 1 folder in your PC).Copy your new ROM ***.nbh and rename it to (BLACIMG.nbh) to your root of SD card (put it direct to SD card, dont put it in any directory files) (Very important)
Third, turn off your device by power button, insert back your SD card. Put and hold Power button + Vol Down until your device show " checking ..... BLACIMG.nbh". Then you press and release Power button to update a new Rom. After updating completed. Press reset button to restart your device. Now you have a new Rom.
You can watch this video for more practical information
http://www.youtube.com/watch?v=FbRboNeo2XE
Wish the best to you man
0. Make sure phone is hard-spl first
1. Make sure SD card is formatted with fat-32
2. rename the image file (ruu_signed.nbh) to rhodimg.nbh, then copy that to the ROOT OF THE MICRO SD CARD, Insert card into phone
3. Set your phone in bootloader (Hold the "volume down" and hold the power on button until you see the tri-color screen.
4. Then follow the on-screen instruction
5. (OPTIONAL) -after flash, make sure to hardreset (pull battery, insert battery then hold green and red PHONE buttons (send/end) and hold powerbutton) follow onscreen instruction.
thanks for the info
I've tried the above and somehow it won't work on my TP2, it stays at "Serial" text in the white box, I'm assuming it already went past the SD slot then? Checking for the image.
I have the Energy rom loaded on the SD card, named as explained in the first post in this topic, it is placed in the root of the SD card, no folders or other files exist on that card. I removed the SIM card from the phone just to be sure. Is there anything I am missing, or is there anyone else who actually used this method to flash his or her device?
Info:
SPL: OliNex 0.85
ROM: |RHOD|6.5|ROM|WWE| ★ EnergyROM "Warhawk" (23016) ★ | Built Aug 21 |Manila 2.5 / 2.1|
SD Card: 4GB MicroSDHC (No brand on card, supplied with the branded T-Mo TP2 (Vario V)
Formatted: fat-32
Thanks
The nbh file needs to be in capital letters! RHODIMG.nbh
And step 5 isnt to be done until the "Tap screen to set up device" screen!
Just reset when your phone says Update successful!
And done, name changed to the correct format. No luck. Reformatting the card now to see if that changes anything. Update in a few.
And that too didn't work sadly. Either someone here notices I'm doing something wrong, or I'll just wait till I get near a machine natively running Windows Running Mac OS here so can't run the executable, and read that it's not quite a good idea to flash it from a virtual OS.
PositiveCreep said:
And done, name changed to the correct format. No luck. Reformatting the card now to see if that changes anything. Update in a few.
And that too didn't work sadly. Either someone here notices I'm doing something wrong, or I'll just wait till I get near a machine natively running Windows Running Mac OS here so can't run the executable, and read that it's not quite a good idea to flash it from a virtual OS.
Click to expand...
Click to collapse
You will want to partition your card so the nbh image is in a partion of at the largest 1G, anything larger makes it hard for the phone to find and read the nbh file! I have a 1G card just for flashing and it works perfect! And it also may be the mac, they never play nice with windows!
It's not the mac screwing it up in this case as I am using a virtual Windows OS to work on the card. (MacOS leaves some folders on the card that I don't want on it)
Will try partitioning the card, cheers. I'll update when I know more. ANd thanks for the help ^_^
Update:
Partioned the MicroSD card to 0.5GB, no change sadly.
thanks for information
Ok, SD update worked now, however, step 5 won't go (Oh crap...) Have the grey screen with "Update Complete" and "UPDATE SUCCESS" However, it won't do anything if I hold down Send/End/Power at the same time for over 10 seconds. How long should that take normally? What's my best option right now? Can't see any other than to unplug the phone and take out the battary, however, will this brick it?
PositiveCreep said:
Ok, SD update worked now, however, step 5 won't go (Oh crap...) Have the grey screen with "Update Complete" and "UPDATE SUCCESS" However, it won't do anything if I hold down Send/End/Power at the same time for over 10 seconds. How long should that take normally? What's my best option right now? Can't see any other than to unplug the phone and take out the battary, however, will this brick it?
Click to expand...
Click to collapse
When is says "UPDATE SUCCESS", just rest with the stylus.
Dave
Thanks for the swift reply! Done it, it's booting up as I am typing this. Didn't quite have the guts to just do that without having read I could when flashing from SD. (Was unsure how the device would react to soft reset then a first booth with the SD present etc)
Anyways, rambling. Thanks!
these post are telling me how to flash while the rom is already on the phone, but i'm missing the step on how to get the rom file on the phone in order to move it to the sd card.......... how do i get the file to the phone? do i put it onto the phone from the computer or do i go to my browser on my phone and download it from there to the phone
htctpII said:
these post are telling me how to flash while the rom is already on the phone, but i'm missing the step on how to get the rom file on the phone in order to move it to the sd card.......... how do i get the file to the phone? do i put it onto the phone from the computer or do i go to my browser on my phone and download it from there to the phone
Click to expand...
Click to collapse
Everything you need to know is HERE. I really suggest you fully read the instructions so you avoid bricking your phone by mistake.
In re: making sure you're hardspl'd first, does that still apply if you're flashing an official ROM? Or just for user cooked ROMs?
I'm about to update my Verizon TP2 with the newly released official 6.5 from verizon. I'm not hard spl'd, and honestly, know very little about that particular modification.
not for official
I dont think you have to be hard SPL'd for an official ROM. I think everything is included in the ROM package. (at least for T-Mobile it is)
btw the .nbh does not have to be named in all capitals. I have personally done it both ways with no problems at all. RHODIMG.nbh works just as well as rhodimg.nbh
kwambewright said:
I dont think you have to be hard SPL'd for an official ROM. I think everything is included in the ROM package. (at least for T-Mobile it is)
Click to expand...
Click to collapse
Thanks for the quick response!
Sadly, the way the install file is set up to work, I can't get to the nbh file. It insists on installing that via an active sync connection. I was hoping it would extract from the exe and schedule it for active sync installation, then I could hunt down the ROM, copy it to my SD card, and run it from there.
fortunz said:
Thanks for the quick response!
Sadly, the way the install file is set up to work, I can't get to the nbh file. It insists on installing that via an active sync connection. I was hoping it would extract from the exe and schedule it for active sync installation, then I could hunt down the ROM, copy it to my SD card, and run it from there.
Click to expand...
Click to collapse
hmm.. sorry for kicking this post, but you can unpack the exe-file with winrar. just grab the biggest file you can find (RUU_signed.nbh, and rename it to rhodimg.nbh), copy it to your root-folder (fast way for accessing bootloader is to also copy the "EnterBootLoader.exe" -file to your SD-card, and to start that file after copying both the files). Now just enter the bootloader, and it works! (don't be scared when the screen goes black for a moment, and the bootloader has reloaded. It's meant to do that )
I still have a little question by the way: is it possible to flash the hardSPL this way? or should i rename it to something else?
No, Hard SPL needs to be done from the PC as it checks IMEI online and IP address. You only get 1 licence, can ask for more or purchase more licences, but it can't be done any other way...
ultramag69 said:
No, Hard SPL needs to be done from the PC as it checks IMEI online and IP address. You only get 1 licence, can ask for more or purchase more licences, but it can't be done any other way...
Click to expand...
Click to collapse
Yeah, it's a pity this has been done (though I understand why...)
My device cannot connect to PC anymore, so cannot use HSPL anymore!
InjecTioN said:
hmm.. sorry for kicking this post, but you can unpack the exe-file with winrar. just grab the biggest file you can find (RUU_signed.nbh, and rename it to rhodimg.nbh), copy it to your root-folder (fast way for accessing bootloader is to also copy the "EnterBootLoader.exe" -file to your SD-card, and to start that file after copying both the files). Now just enter the bootloader, and it works! (don't be scared when the screen goes black for a moment, and the bootloader has reloaded. It's meant to do that )
Click to expand...
Click to collapse
Much obliged. I've actually been scared off the official vzw 6.5 because of issues upgraders have reported, but someday I'll put that to use.
Hi there,
I am using Xperia X1 with Windows Mobile 6.1 as it came to me. I didn't update anything about it.
So, I want to install WM 6.5. But the best edition for my phone of course. How will I install WM 6.5 with simple ways? I researched some topics but everybody says everything. There too many editions of WM 6.5. I couldn't know which is the best for me. Please help me. I bored from WM 6.1.
Thanks for your attention.
"PLEASE HELP. I DECIDED TO INSTALL Windows Mobile 6.5 23053 Manila 2.5". I WANT TO LEARN WHAT SHOULD I DO. STEP BY STEP OF COURSE. THANK YOU"
poyrazozer said:
Hi there,
I am using Xperia X1 with Windows Mobile 6.1 as it came to me. I didn't update anything about it.
So, I want to install WM 6.5. But the best edition for my phone of course. How will I install WM 6.5 with simple ways? I researched some topics but everybody says everything. There too many editions of WM 6.5. I couldn't know which is the best for me. Please help me. I bored from WM 6.1.
Thanks for your attention.
"PLEASE HELP. I DECIDED TO INSTALL Windows Mobile 6.5 23053 Manila 2.5". I WANT TO LEARN WHAT SHOULD I DO. STEP BY STEP OF COURSE. THANK YOU"
Click to expand...
Click to collapse
You have to install Hard-SPL first before installing custom ROM.
1. Go HERE to download X1_HardSPL_v1.zip, extract it to X1_HardSPL.exe on your PC
2. Run X1_HardSPL.exe and follow all steps in the RUU, and check on the device for prompts after PC shows loading bar.
3. Your phone should go to tricolour screen and say 0.52.OliNex.MFG (this is SSPL!).
4. After Hard-SPL flashes, your X1 will automatically reboots, job done.
5. To confirm you got Hard-SPL installed, go into bootloader mode (tricolour screen) and verify the screen shows 0.72.OliNex
After finish installing Hard-SPL, you can now install your custom ROM. The most easy way for me:
1. Download your preferred ROM to your PC, the file extension of your ROM should be .nbh
2. Format your SD Card to FAT32 (Thanks ady_95. )
3. Change your ROM name to kovsimg, copy it to your SD card. (Thanks again ady_95 )
4. Turn off your phone, remove and reinsert the phone battery.
5. Press and hold first the volume down button on the phone and then the phone power button.
6. Continue holding the two buttons (volume down + power button) down until the phone display turns on and displays colored stripes, then release the buttons.
7. Your phone will search for the kovsimg.nbh file in your SD card. When it found, your phone will continue to update process.
8. Follow the instructions on your phone and let the update process running
9. When it was done, pull out battery and reinsert then turn on your phone, that's all.
Hope you understand and sorry for my grammar.
I will try your suggestion and will announce. Thank you.
jerrytan93 said:
2. Change your ROM name to kovsky, copy it to your SD card.
Click to expand...
Click to collapse
I think you're wrong... the *.nbh file must be renamed to Kovsimg.nbh and your microSD card must be formatted in FAT32 (very important)
and then put kovsimg.nbh in root of your FAT32 microSD card
after that continue with step 3
Thanks for reminding, post corrected.