Database Develop

GPRS / EDGE / Wi-Fi

I upgraded my MDA to the new Custom 2.17 ROM and it works great except that I can't get on to the internet. I only have T-Mobile T-Zones but I used to be able to get on using the 8080 hack in the proxy settings. I changed them and now feel like I may not have needed to. I changed he HTTP setting and I also changed the WAP settings. Do any of you have the correct setting for HTTP, WAP, Secure WAP and Socks. Thanks for any help that you can offer.

T-mobile finally caught on to the t-zones workaround for our phones. it's probably just a coincedence that it happened the same time as your upgrade... I had to upgrade my plan to the internet $29.99 thing to get access too. Sorry.

T-zones wap or internet plan 29.99

Can anyone tell me what are the quality differences of using the t-zones wap connection and using the total internet plan for 29.99? does the t-zones wap connection use edge or just gprs? i feel that my bill is just too high and i want to bring it down by taking off that lame 29.99 plan.

Instead of paying $29.99 for web access, you can get most of the functionality by paying $5 with the correct setting.
Read this:
http://forum.xda-developers.com/viewtopic.php?t=57897
The difference between t-mobile web and total internet:
T-Mobile Web basically will provide you access to the wap sites, but with the correct proxy setting, you also can get out to the internet, but with T-Mobile Web, you do not have direct access to the internet, you are connected through the proxy server. Thus, you only have several ports opened for you: HTTP, WAP, POP3, and few more ports.
The total internet plan will give you direct access to the internet, you have all ports opened for you. Thus you can run anything you want, and no ports are blocked.
Either plan can be used from the PPC, or from the laptop, as long as the laptop is set up correctly. Your laptop can be connected to your PPC either with direct USB connection, infrared, or Bluetooth.

So basic internet access like websites can work thru tmobile web, even downloading from websites? tmobile web also can reach edge speeds also? thanks for the above reply, i think i might cancel that dumb 29.99 plan.

Cannot connect to Slingbox on AT&T

This is the most appropriate location I could find to post this, as I have three HTC devices (8525, TyTN 2, and Advantage) so I thought I would start here.
Issue:
I can no longer connect to my Slingbox on my home network when using my MediaNet (wap.cingular) connection on the TyTN 2 or the Advantage.
Error Message: Cannot connect using these settings. But email and web work from the MediaNet settings, so I am fairly certain the configuration is correct.
Facts:
- The connection works over Wifi on either HTC device, so I know my Slingplayer Mobile settings (Finder ID, etc.) are correct.
- The connection works using a Verzion Motorola Q. My corporate VPN connection also does not work with AT&T, but does on the Q through Verzion.
Conclusion:
AT&T has (or did) make changes to the proxy used which prevents services running on certain ports from working correctly.
Question:
Is anyone else having problems connecting to their Slingbox? If you can connect, what settings are you using?
Additionally, could someone please explain the differences between the wap.cingular and isp.cingular settings? Do you have to use isp.cingular to get VPN and other advanced services to work? If so, what is the minimum data plan you must subscribe to with AT&T to be able to do so?
Thanks in advance,
Rob

I cant say why you are having issues. My Slingbox connection works fine (actually much better than fine) via my Kaiser on AT&T with MediaNet. It works better than it ever did with my 8525. I do notice that I do have 2 separate Connections, one for MEdiaNet and the other called "My ISP" which both point to the same wap.cingular APN. Not sure why I have 2, but everything works fine. The MediaNet one is "hidden" and I can't change it. The My ISP one is visible, but I don't want to delete it since everything seems to work fine. It just switches between them (albeit unnecessarily) to make things work when needed.

Furthermore, I am using wap.cingular exclusively. If you do connect to a VPN, you must use isp.cingular. The normal MediaMax, MediaNet and smartphone plans give you wap.cingular. The PDA plans give you isp.cingular. Blackberry plans may give you neither (they go to blackberry.net).

Thanks
Can I ask what port # you are using for your Slingbox? I am using 5001 for one of mine. Did you have to make a rule entry in your router or firewall? I am just trying to determine why suddenly I cannot connect. I am going to pop my SIM card back into my 8525 when I get home and check it again. The last time I tried it on the 8525 it worked. The trouble is, there aren't a lot of changes to make. it's pretty much wap.cingular and the password.
Thanks, and if you think of anything else, please let me know.
Rob

my slingbox works just fine on att. WHen i had the isp.cingular it did not. i had to change it to wap.cingular to get it to work.

Hmmm, don't know th eport off hand, but I want to say i'm justusing the default.

Did you upgrade to the new Slingbox firmware the past couple of days?
I did and could not connect. I called Slingmedia and they told me they had some issus with the new firmware and UpnP settngs in some routers.
I had to go into the Slingbox settings on the desktop PC and manually open the port in the router. If you call them they will take you step by sep

I had the same problem it took me 10 hrs to finally find the answer. It has nothing to do with your port your finder ID at all. like the a previous stated you need to use a different connection setting to use slingbox. Use or create the my isp connection. the only difference is one use proxy settings and one does not. to be honest i just deleted the media net profile and used my isp exclusively. the only problem is medianet keeps showing up in my connection settings. the medianet setting can also screw with push email retrieval

Thanks so much NJXBEAN! I could NOT get Slingplayer to connect until I made that change in the modem settings. It works great now!
-Jerry

Proxy was blocking me...
After experimenting with mine further, I was FINALLY able to connect by unchecking the "use proxy server" setting on my unlocked Kaiser. I wonder if the AT&T "Tilt" build of the OS will even allow this?

AT&T Tilt and Slingbox
Right out of the box, Slingplayer worked on my Tilt. I made no changes to the proxy settings.
I have the media net unlimited plan.

It could be a firewall issue. If the connection you have is listed as "Connects to the Internet" it'll block some ports. If you have Connects to Work, it'll open all ports.

I just just want to say that you guys are great! I had a problem with sling, researched on it here, and found the problem without asking..People, u gotta love it!!!!!!

rtsrob said:
This is the most appropriate location I could find to post this, as I have three HTC devices (8525, TyTN 2, and Advantage) so I thought I would start here.
Issue:
I can no longer connect to my Slingbox on my home network when using my MediaNet (wap.cingular) connection on the TyTN 2 or the Advantage.
Error Message: Cannot connect using these settings. But email and web work from the MediaNet settings, so I am fairly certain the configuration is correct.
Facts:
- The connection works over Wifi on either HTC device, so I know my Slingplayer Mobile settings (Finder ID, etc.) are correct.
- The connection works using a Verzion Motorola Q. My corporate VPN connection also does not work with AT&T, but does on the Q through Verzion.
Conclusion:
AT&T has (or did) make changes to the proxy used which prevents services running on certain ports from working correctly.
Question:
Is anyone else having problems connecting to their Slingbox? If you can connect, what settings are you using?
Additionally, could someone please explain the differences between the wap.cingular and isp.cingular settings? Do you have to use isp.cingular to get VPN and other advanced services to work? If so, what is the minimum data plan you must subscribe to with AT&T to be able to do so?
Thanks in advance,
Rob
Click to expand...
Click to collapse
have you found a fix, i have the x7500 and my slingbox worked fine at first then after a couple of months it just stopped and i could not receive email either, i found a workaround for the email but i have not found a work around for the slingbox.
P.S. i recored myself talking to an at&t rep you should listen to what he says
http://www.youtube.com/watch?v=h40AMIyc_yM

Found a Fix
It cannot connect to isp.cingular, you need to ADD wap.cingular apn to your network settings.

hnada said:
It cannot connect to isp.cingular, you need to ADD wap.cingular apn to your network settings.
Click to expand...
Click to collapse
If you just make your default connection Media Net it's already going to be set for wap.cingular
isp.cingular is the default only if you have it set to use ATT ISP as your connection.

Wow, I want slingbox now. I didn't even think of it working on my Tilt....is the data transfer extreme????????

AT&T Settings for EDGE, 3G

I have been lusting after a Windows Mobile device for around two years, just waiting until the perfect phone came along. Finally the Kaiser is here, minus the VGA display, but seemingly everything else I could ever want. I would prefer to buy the unlocked version, but I have a serious reservation. While I waited for the Kaiser, I bought an unlocked Nokia 6131, but I had no luck making certain features (mobile web, sending pics to email) work on Cingular/AT&T wireless. I would be rather pissed if I bought a $800 BRICK!
My question: I know many of you are using the Kaiser on AT&T here in the USA. Is there a definitive source for the settings needed to use the EDGE and 3G networks? Could someone please post the link or the settings here? One thread I read indicated that the Kaiser automatically connects to these networks--is that true?
There are a lot of inexperienced people out there posting rubbish answers to questions like this. I'm a noob and I wouldn't presume to give advice to someone unless I knew what I was talking about. I'm hoping this thread will be useful to anyone considering an unlocked Kaiser, so please keep the misinformation to a minimum.
Thanks!

I'm using Kaiser in California on AT&T. I have 3G at my house, and there were no settings that were required for the phone to work. I put in the sim and it took off running. I've sent pics, text, slingbox streaming video, email, no issues at all.
I did load a different comm manager with a "3G" button to hold off 3G to save battery and give me control as to when I need a fast connection.

I use it in NYC on AT-T/Cingular and have no issues I use the wap.cingular settings for data and MMS since I hate MediaNet. But it works great and have 1.2MB download speeds every time I test.

Thanks for the quick replys. I was under the impression that the Kaiser came with the ability to turn off the 3G when you are out of range, is that not the case? Also, what are the wap.cingular settings that you are referring to? Did you have to input them before the phone worked? (I'm sorry for my ignorance!)

If you buy an unlocked TyTN II, it comes with a configuration app for most carriers including AT&T/Cingular. So, it works essentially out of the box with the 3G/Edge and of course phone network.
But even so, if you need to manually config it, here are the entries. Note, there are 2 different network APNs for AT&T depending on what plan you have. If you have a MediaMax, MediaNET, or Smartphone pdata plan, then use the first. If you have a PDA plan, then use the second set.
Connects to: The Internet
Access point: wap.cingular
Username: [email protected]
Password: CINGULAR1
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
IP address: (blank)
Connects to: The Internet
Access point: ISP.CINGULAR
User name: [email protected]
Password: CINGULAR1
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
IP address: (blank)
You can do a google on wap.cingular also, and will take you to many pages with more detailed instructions also.

jomo25 said:
If you buy an unlocked TyTN II, it comes with a configuration app for most carriers including AT&T/Cingular. So, it works essentially out of the box with the 3G/Edge and of course phone network.
But even so, if you need to manually config it, here are the entries. Note, there are 2 different network APNs for AT&T depending on what plan you have. If you have a MediaMax, MediaNET, or Smartphone pdata plan, then use the first. If you have a PDA plan, then use the second set.
Connects to: The Internet
Access point: wap.cingular
Username: [email protected]
Password: CINGULAR1
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
IP address: (blank)
Connects to: The Internet
Access point: ISP.CINGULAR
User name: [email protected]
Password: CINGULAR1
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
IP address: (blank)
You can do a google on wap.cingular also, and will take you to many pages with more detailed instructions also.
Click to expand...
Click to collapse
As I mentioned, I'm doing fine with the initial startup when I installed my sim card. However, I do have a PDA plan so I did add MyISP with ISP.CINGULAR to connect to the internet.
I still see the unit connect via MediaNet for certain applications but can't find where that config is located as I only have one defined connection labeled AT&T GPRS with the ISP.CINGULAR access point.
Does anyone have an idea as to why that would be?

I'm with AT&T in CA and am using the iPhone plan. The auto config sets the data connection to ISP.CINGULAR. You'll need to change it to WAP to get connected properly for Gmail and Internet. ISP works but only for the Internet. For some reason it fails for email, Gmail POP3 email anyway.
My connection switches automatically between EDGE, GPRS and HSDPA.

RemE said:
As I mentioned, I'm doing fine with the initial startup when I installed my sim card. However, I do have a PDA plan so I did add MyISP with ISP.CINGULAR to connect to the internet.
I still see the unit connect via MediaNet for certain applications but can't find where that config is located as I only have one defined connection labeled AT&T GPRS with the ISP.CINGULAR access point.
Does anyone have an idea as to why that would be?
Click to expand...
Click to collapse
It's hidden. Mine does the same, even tho both the visible "My ISP" and hiddne "Media NET" connect to the same place. It might be viewable in the registry...

Under Start - Settings - Connection Tab - Connections, checkout Edit Work settings...that's where I found Medianet settings.

Does Blackberry Connect fall under a PDA plan? Basically, should I use the ISP.Cingular?

cman6453 said:
I'm with AT&T in CA and am using the iPhone plan. The auto config sets the data connection to ISP.CINGULAR. You'll need to change it to WAP to get connected properly for Gmail and Internet. ISP works but only for the Internet. For some reason it fails for email, Gmail POP3 email anyway.
My connection switches automatically between EDGE, GPRS and HSDPA.
Click to expand...
Click to collapse
I didn't know you could get an iPhone plan (unlimited EDGE, no 3G) for a device other than the iPhone. How did you pull that off?

caleymac said:
Under Start - Settings - Connection Tab - Connections, checkout Edit Work settings...that's where I found Medianet settings.
Click to expand...
Click to collapse
Found it Thanks! I went to the connections tab, didn't see MediaNet. It turns out that it was a pull-down choice for both Internet and Work fields. I just pulled down MediaNet for work, then went into Edit, tapped and held to delete the MediaNet entry. Now it's gone from the pull downs.
When I was speed testing the Internet Sharing with my Laptop, I found that when using speedtest.net that the wap.cingular connection shows it's origin on the USA Map in SpeedTest as Florida (I'm in Calif). When I ran Speedtest using isp.cingular, the location origin was Los Angeles and it tested faster for me.

RemE said:
Found it Thanks! I went to the connections tab, didn't see MediaNet. It turns out that it was a pull-down choice for both Internet and Work fields. I just pulled down MediaNet for work, then went into Edit, tapped and held to delete the MediaNet entry. Now it's gone from the pull downs.
When I was speed testing the Internet Sharing with my Laptop, I found that when using speedtest.net that the wap.cingular connection shows it's origin on the USA Map in SpeedTest as Florida (I'm in Calif). When I ran Speedtest using isp.cingular, the location origin was Los Angeles and it tested faster for me.
Click to expand...
Click to collapse
Thats Bizzare... For me, I am on the PDA connect plan and I am forced to use wep.cingular, because, I can't connect to ISP.Cingular... When I asked ATT about this, she said, "We are migrating all users regardless of whether they are on the PDA or Media net to the wep.cingular access point... I had a notion she was full of it, but now I know she is full of it...
With the pda plan I shouldnt have any problem connecting to isp.cingular, correct?
JB

I'm on the unlimited PDA plan and using isp.cingular

RemE said:
I'm on the unlimited PDA plan and using isp.cingular
Click to expand...
Click to collapse
Did you have to give them the IMEI #?
I just got off the phone with a supervisor from ATT telling them that I want to know why I can't access ISP.CINGULAR ap and only the WEP.CINGULAR.
Their answer was because they don't know my IMEI number and that if I gave that to them then it would work... I told them thats Customer support BS and that I can't find my IMEI number. I also told em that if my phone is capable of connecting to the wep.cingular ap that there is no reason I wouldn't be able to connect to the isp.cingular ap unless I wasn't provisioned for the PDA plan and just provisioned for the media net plan, even though I am paying the extra 20 dollars for the PDA plan...
I can't stand ATT, I am with them only to get 3g in Los Angeles.. As soon as another company matches what att has to offer I'm leaving att...
Anyone have any ideas and advice about this?
JB

RemE, did you purchase your old 8525 from cingular? If so, then they obviously have your 8525 imei#. Did you ever tell them you upgraded from the 8525 to the Kaiser? If not.. then they probably think your still on the 8525. If so, then the 8525 is a pda which the kaiser is as well, which means that maybe they won't provision you for the pda plan unless they know your using a pda.
Just a thought.
JB

No, I set up the account initially with a Razr on Cingular, migrated to a 8525 and expanded to unlimited data. I was using wap.cingular all that time, didn't know about isp.cingular. I had noticed the origin as Florida when speed testing the connection.
When I got the Kaiser, popped the SIM in and it auto created the MediaNet connection. In reading this forum I found the isp.cingular and gave it a try and found that it shows origin in LA, so I went that route and now have deleted MediaNet. I haven't had any contact with AT&T about any of this.
Edit; they have my 8525 imei on file as my current phone.

RemE said:
No, I set up the account initially with a Razr on Cingular, migrated to a 8525 and expanded to unlimited data. I was using wap.cingular all that time, didn't know about isp.cingular. I had noticed the origin as Florida when speed testing the connection.
When I got the Kaiser, popped the SIM in and it auto created the MediaNet connection. In reading this forum I found the isp.cingular and gave it a try and found that it shows origin in LA, so I went that route and now have deleted MediaNet. I haven't had any contact with AT&T about any of this.
Edit; they have my 8525 imei on file as my current phone.
Click to expand...
Click to collapse
So when you migrated to the 8525, Cingular knew about it, right?
JB

unlocked at&t tilt on tmobile data settings

hey guys, just got the tilt, awesome so far. the 5.99 tzones proxy deal works perfectly on my dash, and now i'm trying to get it to work on the tilt, just dont know how to enter the settings. any help would be great, thanks
omar

nobody knows??

omaralt said:
nobody knows??
Click to expand...
Click to collapse
I didn't try it with the AT&T ROM but with HTC ROM, it will ask if you want to configure the data settings for Tmobile as soon as it detects the Tmobile SIM card.

thanks, but i'm using the atnt rom for right now, so if anybody has those settings i'd appreciate it, thanks
omar

i also have my tilt unlocked and when i put in a tmobiel sim it does ask if i want to reconfigure ....but of course thats for htc rom....so i would advise to flash if you can not find a way to use your tzone

so are you using the 5.99 plan with htc rom?

i also have a Unlocked Tilt on T-Mobile any way to get data to work with out a ROM MOD

start>settings>connections>connections
under proxy settings check: this network connects to the internet
check this network uses a proxy server to connect to the internet
proxy server should be :216.155.165.50
click advanced
http: 216.155.165.50:8080
wap: 216.155.165.50:9201
secure wap: 216.155.165.50:9201
socks (blank)
under modem, your access point name should be : wap.voicestream.com
name and password blank.
under advanced check use server assigned ip address
use software compression
use ip header compression.
hope this works for you, i forget which order to do it.

Thanks, those setting works for me.

will those settings work with the t-mo unl data plan?

mrbkkt1 said:
start>settings>connections>connections
under proxy settings check: this network connects to the internet
check this network uses a proxy server to connect to the internet
proxy server should be :216.155.165.50
click advanced
http: 216.155.165.50:8080
wap: 216.155.165.50:9201
secure wap: 216.155.165.50:9201
socks (blank)
under modem, your access point name should be : wap.voicestream.com
name and password blank.
under advanced check use server assigned ip address
use software compression
use ip header compression.
hope this works for you, i forget which order to do it.
Click to expand...
Click to collapse
thanks so much, these worked for me also....

Yeah those setting work good on all the different rom, i have used.. ATT,HTC, Now Dutty's.. I am gonna be very disappointed if they ever close the loop hole!

how slow is that tmobile internet... i have heard its very slow...

tseten said:
how slow is that tmobile internet... i have heard its very slow...
Click to expand...
Click to collapse
It's significantly faster if you use the internet3 vpn apn.
I'm curious...does anyone see speed differences with "use software compression
use ip header compression. " enabled or disabled? Seems the same to me.

oh i was referring the slow internet to the tmobiles $5.99 plan...
i know they have a $20 a month plan for the smart phones, obviously that one better be fast for that kind of price....

crazysim said:
will those settings work with the t-mo unl data plan?
Click to expand...
Click to collapse
unlimited data plan should work w/ the base settings.. from the settings wizard.

tseten said:
oh i was referring the slow internet to the tmobiles $5.99 plan...
i know they have a $20 a month plan for the smart phones, obviously that one better be fast for that kind of price....
Click to expand...
Click to collapse
I used to have the unlimited data plan.... IT was always slow for me, same as tzones, but for the price......
I'd pay the money for speed.

tmobiles data connection sucks...but if u have an unlocked att tilt an uur using tmobile service like me...u need 2 use this connnection setup wizard to configure ur att tilt for tmobiles data connection. I personally won't pay for internet, especially tmobiles ****ty edge internet for 29.99 unlimited plan...I use wifi religiously and its way faster then edge..and free. Wireless in my house is connected to a cable modem and it is quick.
...anywayz here u go

moegdaog said:
tmobiles data connection sucks...but if u have an unlocked att tilt an uur using tmobile service like me...u need 2 use this connnection setup wizard to configure ur att tilt for tmobiles data connection. I personally won't pay for internet, especially tmobiles ****ty edge internet for 29.99 unlimited plan...I use wifi religiously and its way faster then edge..and free. Wireless in my house is connected to a cable modem and it is quick.
...anywayz here u go
Click to expand...
Click to collapse
Exactly what does this file do? i have a tilt and using t-mobile 5.99 tzones plan. and some applications don't work, for instance dashwire will not connect on my phone, unless i use wi-fi.

here just install this cab and then go to settings, connections, connections, advanced, select networks and set them both to T-Mobile US and ur good to go