im using an htc kaiser 8925 and in all honesty im pretty new to wm 6.1 and the phone in general. mine is unlocked, and i havent messed with any roms yet. oh and im using it on t-mobile too. the problem im having is i cant get it to connect to my home router, and i dont know what to do. all im trying to use is the wifi, i havent purchased the t-mobile internet package yet. i have no clue which wifi settings to change or what to change them too. i cant receive picture messages either, if someone could help me figure this stuff out as well i would greatly appreciate it.
First:
Make sure your home router is BROADCASTING the SSID. You might have turned it off for security reasons? If it is turned off, your phone can't find the wireless network.
Second:
Start the phone's COMM MANAGER and turn on wireless - it should find your home network automatically - no matter if you have encryption on there or not!
If the phone does not give you a notification message about the network it found, click in the COMM MANAGER on SETTINGS - WIRELESS and delete all listed networks in there. Afterwards turn off Wireless again, restart your phone and then turn wireless on again ... try if that helps!
ugh it was the wireless in the comm manager thanks alot
Regarding your picture msgs, T-mobile normally require you to send a picture message to enable it. After you've sent one you should be ok Just make sure you've got the T-mobile mms settings setup
Hi, I have been using a mobile to just talk and SMS. Few days back bought a HTC TYTN II Kaiser and this was a quantum jump for me. Question - 1. Is it possible to have WiFi, GSM/3G and Bluetooth services active all the time ? 2. How do I know which service is being utilised by an application to communicate with outside world ? I want the phone call and SMS to utilise GSM/3G and all other to use the WiFi (home broadband). Appreciate help in laymans language. Thanks.
Most of that can be configured in your Connection Settings, go in there and take a look around.
Having everything on at the same time will severely reduce the time your device's battery will last. You may wish to rethink.
Thanks folks. I could find the setup for SMS and phone. SMS and Phone through O2 (current service provider). This is what I wanted. I now need to direct everything else to go via wireless-broadband.
@ stuntdouble
not to mention that WiFi and Bluetooth on at the same time is a trainwreck.
Thanks for the causion. I intend to turn on WiFi or Blue when I want. So no issues.
Pop quiz for experts. I see an 'E', '3G' or a 'G' at various times as the active connection medium. To connect to the internet using my home broadband, I turned on the WiFi and saw the WiFi icon in the place where the above symbols appear. Does this mean that the WiFi is active & connected to the Internet AND the 3G or GPRS or E is deavtivated ? Internet worked perfectly. Is there a priority among the connecting medium/protocols ?
Im trying to make my tab use wifi only becuase i don't have t-mobile service anymore. Is there anyway to get it to stop saying "searching" all the time? I have factory reset my tab but unlike other devices, there is no initial setup so i can choose WIFI only. Anyone have any ideas?
I use;
https://market.android.com/details?id=myc.phone.PhoneInfo&feature=search_result
then turn off the radio.
(also popped the sim out as I was getting occasional SIM Detached messages and reboots, so figured it was simpler to just take the SIM out and turn off the radio)
jadamson145 said:
Im trying to make my tab use wifi only becuase i don't have t-mobile service anymore. Is there anyway to get it to stop saying "searching" all the time? I have factory reset my tab but unlike other devices, there is no initial setup so i can choose WIFI only. Anyone have any ideas?
Click to expand...
Click to collapse
Go into Airplane mode, and then turn on the wifi.
Thats what I do. It uses less battery.
Also deactiveate "Data network mode"
captirwin said:
Go into Airplane mode, and then turn on the wifi.
Thats what I do. It uses less battery.
Also deactiveate "Data network mode"
Click to expand...
Click to collapse
Me too, same as above, but then bluetooth headsets, printers, and keyboards won't work.
rangercaptain said:
Me too, same as above, but then bluetooth headsets, printers, and keyboards won't work.
Click to expand...
Click to collapse
Rangercaptain...where do you think I got the idea from? YOU.
THANKS.
Well, thanks for sharing! You have a good answer!
I disconnect my data plan and using tab as phone. join wifi at work and home and enjoy phone and tab same time lol.
jadamson145 said:
Im trying to make my tab use wifi only becuase i don't have t-mobile service anymore. Is there anyway to get it to stop saying "searching" all the time? I have factory reset my tab but unlike other devices, there is no initial setup so i can choose WIFI only. Anyone have any ideas?
Click to expand...
Click to collapse
Just flash overcome! Then follow simple instructions to turn off radio.. I its really simple.
Edit:
(copy/pasted directly from Overcome tweaks guide)
"Turning the 3G-based Tab into a "Wi-Fi only" device (Disabling the GSM Radio!)
To disable the GSM Radio:
- Bring up your Phone/Dialer program
- Enter: *#*#4636#*#*
- Select Device Information
- Scroll to the bottom
- Tap the "Turn Off Radio"
This will disable all Cell/GSM/EDGE connections – should only be used for those who do not subscribe to a data/cell package. This will leave Bluetooth/Wi-Fi (I think) on so you can still connect Bluetooth devices etc., as opposed to switching to Airplane mode which turns everything off! "
Thanks team Overcome. I have done this on two tabs and this works perfectly. Hope it helps?
Sent from my GT-P1000 using XDA Premium App
I use this:
https://market.android.com/details?id=net.geekherd.airplanemode
You can turn off the radio, use wifi and I believe it allows you to use bluetooth as well.
Sorry to dig up an old thread, but I wanted to offer an alternative solution for anybody still trying to find a persistent solution to creating a Wifi only Galaxy Tab. I use Llama to set up a start up event that turns Airplane mode on, waits 1 minute, and enables Wifi. It has worked well for me for the past several months. Here's the run down of my Llama configuration:
Event Name > Start Up
Conditions -
Phone reboot > After start up
Actions -
Toggle Airplane Mode > Airplane Mode On
Queue Another Event >
Event Name > WiFi On
Event delay > 1 minute
Actions -
Toggle WiFi > WiFi On
I hope this helps someone out.
i have a Verizon Note 3 Stock/Root Rom and Gear with NULL Rom but no Nova launcher. i install NULL for the extra features but like the stock look and feel. this should work with NULL installed period regardless of your setup.
i have used Network Spooker, PdaNet, etc etc etc trying all scenarios trying to get the best results with the least amount of work to set it up and having to reconnect etc...
i am posting this just 10 minutes into my testing and so far so good.
here is what i did and with others help perhaps we can figure out if this is the best way and how it may or may not work with Gear Connection Bridge etc...
1. on Gear i put it in airplane mode
2. on N3 i turned off wifi and BT
3. on N3 i went into settings > Wireless and Network > More Settings > Tethering > tick BT Tethering
4. on Gear leaving it in airplane mode i just turned on BT and connect to N3
5. on Gear Settings > Bluetooth > tap the settings icon next to your phone device name > scroll down and tick Internet Access
7. on Phone you should see in Taskbar "Tethering Active"
8. on Gear open Browser or whatever to test
6. DONE
i have no other items running like Spoofer etc.. and everything seems to work perfectly. i now wonder for location how Gear Connection Bridge will wok?
also wonder what a day or 2 of testing battery will look like?
please let me know if this works for others
Looks great
Sent from my SM-N900T using Tapatalk
I don't get it? That's how tethering is meant to work...
Brendo said:
I don't get it? That's how tethering is meant to work...
Click to expand...
Click to collapse
well at least for me on Verizon (not sure what carriers matter) i could only get internet access with Xposed Network Spoofer set to "Wifi" then PdaNet+ running on N3 and then PdaNet Tablet running on Gear and it was a lot of steps to get them all going. it did not work "out of the box" for me on Verizon as you were thinking.
if tethering wasnt an issue for you this will mean nothing but to me it was HUGE and very excited to figure it out.
lets see if others agree that may look at this and maybe im just nuts and this post was pointless
Some phones need wifi connection off before you can use Bluetooth tether, but other than that if you have the option on your phone to do Bluetooth tethering, then the profile will appear whenever your watch is connected
Brendo said:
Some phones need wifi connection off before you can use Bluetooth tether, but other than that if you have the option on your phone to do Bluetooth tethering, then the profile will appear whenever your watch is connected
Click to expand...
Click to collapse
well i would never get the profile to appear and when i simply selected BT Tether in phone settings it would just turn itself back off again shortly. it wasnt until i set Gear in Airplane mode and with BT on phone off and then selecting Tether on phone that the option ever worked. trust me i had hours testing this in every way posted here
anyway it works for me now and so maybe others will benefit if they were having issues like i had.
I used Tasker with BT auto connect on the gear. When the gear connects to the note 3 blue tooth with is automatic Tasker will signal BT auto connect. Now I have sprint so I used BT auto tether on my note 3. So in other words I can reboot either device and it will automatically tether the gear. I can turn blue tooth of as well then back on same result if you are running Tasker on the note 3 also. The only issue I have is if I turn tether off on the note 3 from the settings then back on. I would have to re-enable it manually on both. But I think there maybe a way to have Tasker on the note 3 send a blue tooth packet to the gear that Tasker there can see and respond to. Any thoughts or suggestions?
Sent from my SM-N900P using xda app-developers app
As AAWireless gets shipped and people are getting their device, so I think more people are running into the same problem:
When using MIUI the chance is pretty high that it is possible to connect wirelessly with Android Auto, but there won't be any internet connection. Which makes AA pretty unusable.
The problem is that MIUI should switch from Wifi to cellular data if Wifi connection has no internet. But it does not switch.
As I don't want to unlock my bootloader to change to another ROM (don't know which ROM would work on my Mi Mix3 either) and don't want to wait until some updates from MIUI arrives, I startet this thread and hope it is possible that we find a workaround together.
Some questions/possibilities I have in mind:
Is it possible to combine the connection of cellular data and wifi? Then no switch would be necessary because both are connected at all times
maybe speedify will work? => tried it, but i couldn't get cellular data to cennect via speedify
is it possible to force some apps to only use cellular data?
found the possibility in settings to tell apps that they are not allowed to use SIM1 / SIM2, but I was not able to tell Google Maps that it is not allowed to use Wifi. That setting is not changeable
Is it possible to emulate a USB connection so that MIUI thinks that the phone is connected. Because when I connect it via USB cable it switches to cellular data and I can use the internet connection
Maybe some of you can help with that problem as it is very annoying. AAWireless works at it is intended to, the problem is MIUI in this case.
I struggled with this too, and found no solution within Miui.
The only solution that worked for me was to unlock the bootloader of the phone and to replace Miui with Lineage OS.
Have you tried switching wifi assistant on?
Go to settings/wifi/wifi assistant and switch it on.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I tried switching it on, but it didn't work either.
BUT I got it to work sometimes!
Let me explain...
Some days ago I went to my car, opened it, got my sunglasses and walked away from the car.
Then I got a notification that told me my wifi connection does not have a internet connection and if i wanted to use mobile data. I don't know what happened there, as I didn't even have the ignition on.
So I went back to the car later and booted up the system. First I ignored the message, knowing that some people wrote in the forum to ignore the message.
But as I didn't have working internet connection while connected to AAWireless, I tried to let it use mobile data and it worked!!!!
I was connected to AAWireless and had a working internet connection for the first time!
The car wakes up as soon as you open the doors and AAWireless boots up. So something did trigger that my phone went into another mode. So it didn't ask me if i want to stay connected to AAWireless or chosse another, stronger wifi, but if I wanted to use mobile data instead. (Wifi Assistant options were off)
After that I tried turning the Wifi Assistant options on and thought maybe now it would work. But it didn't.
So I switched the options back off, tried again to connect to the car, but I was back to having no internet when connected.
The next day I went to the car, it booted up and it worked again! (After confirming to use mobile data when asked) I have no idea why?!
I used it a few times in the last days. It worked after I confirmed to use mobile data when asked.
As soon as I turned Wifi Assistant on it didn't work anymore. Tried that several times.
But sometimes it did not work the first time I went into the car and started it up. Then I had to turn off the car, open the door (12V will be off), close the door and start it again.
Today it did not work, even after rebooting it four times.
So I think it has something to do with timing.
- when the phone connects to what (Wifi, Bluetooth)
- media system booting before/after AAWireless
- ...
But there is hope that it is fixable!
P.S.:
- Xiaomi Mi Mix 3
- stock MIUI 12.0.2 global stable
- Android Auto 6.2.610914
- Wifi was connected to AAWireless
- Bluetooth was connected to the headunits bluetooth
Our problems are primarily related to the MIUI , since on a pure android users of the AAW have no problems.
Can turning off MIUI optimization in the "for developers" menu help us?
Unfortunately, I haven't received the device yet, so I can't experiment with different settings yet.
usedr said:
I tried switching it on, but it didn't work either.
BUT I got it to work sometimes!
Let me explain...
Some days ago I went to my car, opened it, got my sunglasses and walked away from the car.
Then I got a notification that told me my wifi connection does not have a internet connection and if i wanted to use mobile data. I don't know what happened there, as I didn't even have the ignition on.
So I went back to the car later and booted up the system. First I ignored the message, knowing that some people wrote in the forum to ignore the message.
But as I didn't have working internet connection while connected to AAWireless, I tried to let it use mobile data and it worked!!!!
I was connected to AAWireless and had a working internet connection for the first time!
The car wakes up as soon as you open the doors and AAWireless boots up. So something did trigger that my phone went into another mode. So it didn't ask me if i want to stay connected to AAWireless or chosse another, stronger wifi, but if I wanted to use mobile data instead. (Wifi Assistant options were off)
After that I tried turning the Wifi Assistant options on and thought maybe now it would work. But it didn't.
So I switched the options back off, tried again to connect to the car, but I was back to having no internet when connected.
The next day I went to the car, it booted up and it worked again! (After confirming to use mobile data when asked) I have no idea why?!
I used it a few times in the last days. It worked after I confirmed to use mobile data when asked.
As soon as I turned Wifi Assistant on it didn't work anymore. Tried that several times.
But sometimes it did not work the first time I went into the car and started it up. Then I had to turn off the car, open the door (12V will be off), close the door and start it again.
Today it did not work, even after rebooting it four times.
So I think it has something to do with timing.
- when the phone connects to what (Wifi, Bluetooth)
- media system booting before/after AAWireless
- ...
But there is hope that it is fixable!
P.S.:
- Xiaomi Mi Mix 3
- stock MIUI 12.0.2 global stable
- Android Auto 6.2.610914
- Wifi was connected to AAWireless
- Bluetooth was connected to the headunits bluetooth
Click to expand...
Click to collapse
I have still not recieved mine but hopefully I can do some troubleshooting when it arrives.
The messages you received asking if you wanted to use mobile data do sound like WiFi Assistant, strange that they happen when it was switched off.
I have found in the past that some Miui settings don't 'stick' unless you reboot your phone after applying them. Maybe worth a try?
I don't have AAwireless yet. But I have Redmi k20 pro. MIUI 21.3.24 / 25 - Android 11. I connected my phone to WIFI without internet. I forgot all the other WIFI. In the WIFI assistant, I checked the option "keep connected" - I was asked whether to ask about the use of mobile data, I marked "no". In the programming options I checked "always use mobile data". After restarting and connecting to WIFI without Internet - the phone uses mobile data without any problems. Google chrome opens all online pages. - Sorry for my English. Test it.
Did someone found a stable solution that does not require the use of a different rom? This is pretty frustrating
This may not work on your rom, but as I've run into this problem on my Galaxy S10+, this might help. Note, I am on the AAWireless beta team. These are general instructions, so forgive the simple details.
*********************
If you are having issues with mobile data not being available when connected to Android Auto, there are a few things and settings to be aware of. The following is on my Galaxy S10+.
Note, to enable Developer Settings (aka Developer Options, Developer Mode) in Android, find the Build Number (Settings => Software Information => Build Number) and tap 10 times to bring up a confirmation.
Settings which could affect Mobile Data availability.
1) In Developer Options > Mobile data always active (Turn On)
2) Settings > Connections > Wi-Fi > 3 Dot Menu > Advanced > Switch to mobile data (Turn On) > Network exceptions (Delete the AAWireless device if accidentally added– see below).
************************
If you get a message pop-up when connecting to AAWireless:
"Internet may not be available - If you stay connected to this Wi-Fi network now, your phone will also stay connected whenever you use this network in the future. You can change this in Settings > Connections > Wi-Fi > ADVANCED > Switch to mobile data > Network exceptions." Then it gives two options: "Allow switch" and "Stay connected".
You must respond by canceling out of the choice – do NOT choose either option.
If you choose to Stay Connected, it will add a listing in "Network exceptions" that needs to be deleted. The label for Network exceptions says "Your phone will remain connected to these networks, even if the connection is unstable."
Google made this very confusing.
Unfortunately none of the above solutions worked for me, but...
After several failed attempts I documented what i did and analysed it properly, so here is a possible fix that works for me (the "problem" that I have to comfirm to "use mobile data" remains, but at least it works).
Requirements:
AAWireless is configured and Android Auto works wirelessly (except for the fact that you have no mobile data of couse)
====>
turn Wifi Assistant OFF
while connected to AAWireless wifi go to wifi settings and click on the wifi connection; in MIUI you should see a QR code to share the wifi connection => take a screenshot
open the „scanner“ app from miui which can read QR codes
choose the symbol that lets you choose a picture from your images on the phone => choose the screenshot you took
now it translates the QR code and gives you SSID and password from your AAWireless wifi connecttion. If you only see strars/symbols instread of the password, tap on the password and it will turn into characters and numbers
note the password
Open the Android Auto app
Go to settings and DEACTIVATE the „Wireless Android Auto“ setting (the one that you had to activate to get AAWireless to work in the first place)
Close the App completeley
Erase your AAWireless wifi in wifi settings, so that the phone isn’t able to connect to it
Shutdown AAWireless by unplugging it
Shutdown your car completely
Plugin AAWireless again (maybe open and close the door in the car so that the usb plug has power => AAWireless will boot up
Connect to the AAWireless wifi manually
Maybe you get a prompt that asks you if you want to change wifi connection because it has no internet => ignore it
Put your phone into airplane mode, wait 10 seconds
Deactivate airplane mode
Wifi connects to AAWireless wifi
It should now ask you if you want to use mobile data, maybe it takes a few seconds until you get asked
ALLOW it to use mobile data
I had to retry it a few times with switching airplane mode on and off until I got the prompt that it wants to use mobile data.
If it works until here chances are very high that everything will work in then end!
Go to Android Auto app and ACTIVATE „Wireless Android Auto“
Shutdown everything again, unplug AAWireless, shutdown your car and wait a few seconds => all connections should be disconnected
Start your car, plugin AAWireless
AA Wireless and Android Auto should startup as it should and after a few seconds you should get the promt again, that your phone wants to use mobile data => allow it
Android Auto should work now with internet connection
Please let me know if that works for you, too.
Hello guys,
I'm considering getting a Poco X3 Pro due to the price but miui not playing nice with AA and AAW and also the last Xiaomi phone that I had being abandoned for no apparent reason are leaving me in the fence about this. Is it worth the hassle or I should just go with another brand that doesn't f'up android?!?
Honestly, the older I get the more I understand why people get iPhones, they just work...
Thanks
@usedr I tried and it worked on the first try. I just skipped the part where you unplug and shutdown the car. I will see how it goes in the next days. Thank you
I also tried it, but no matter how often I tried to enable airplane mode, I just did not get a popup to use cellular data. Just always "No internet in wifi, keep / connect to other)
Mi 9t, MIUI 12.0.5
I also have a mi 9t with MIUI 12.0.5. Make sure to have options enable like in this page https://cpeb.freshdesk.com/support/solutions/articles/80000527154-xiaomi-no-internet
For me it worked at the first try following usedr steps
Interesting. I also tried that right from the beginning, but it did not work for me, it was switching back to my home wifi all the time because of the auto-switching of wifi assistant.
Maybe try to be in a place out of reach of any other saved wifi or delete them from your phone
Thank you usedr, worked first time for me on my Redmi 8T, MIUI 12.0.3
I removed my home network and enabled all the stuff shown on the link, which made it then work too.
The steps proposed by usedr tell to disable wifi assistant, while the screenshots from the link show wifi assistant enabled. It worked for me having wifi assistant enabled and all known networks in range removed.
I'm using Poco X3 NFC, the strange is only when connected to AA wireless, it did not prompt any message telling me either keep/switch to data cellular or which to other wifi whatsoever. But if I'm connecting to my router without internet or any wifi device without internet it will prompted me.
What could be the difference?
I did follow all the possibility steps from here, no matter what it won't priority the cellular data.
Support
cpeb.freshdesk.com
Looking it this problem would it possible aa wireless connect as client to my mobile hotspot? Or any patch can be tweak to apply for MIUI rom?
Btw i haven't try using airplane method like usedr, will try later and update soon.
But I can't imagine using this method everytime before i drive. Basically it defeat the purpose of cordless, it more faster plugging it using cable. I mean if I'm looking the at advertising of AA wireless video.
usedr said:
Unfortunately none of the above solutions worked for me, but...
After several failed attempts I documented what i did and analysed it properly, so here is a possible fix that works for me (the "problem" that I have to comfirm to "use mobile data" remains, but at least it works).
Requirements:
AAWireless is configured and Android Auto works wirelessly (except for the fact that you have no mobile data of couse)
====>
turn Wifi Assistant OFF
while connected to AAWireless wifi go to wifi settings and click on the wifi connection; in MIUI you should see a QR code to share the wifi connection => take a screenshot
open the „scanner“ app from miui which can read QR codes
choose the symbol that lets you choose a picture from your images on the phone => choose the screenshot you took
now it translates the QR code and gives you SSID and password from your AAWireless wifi connecttion. If you only see strars/symbols instread of the password, tap on the password and it will turn into characters and numbers
note the password
Open the Android Auto app
Go to settings and DEACTIVATE the „Wireless Android Auto“ setting (the one that you had to activate to get AAWireless to work in the first place)
Close the App completeley
Erase your AAWireless wifi in wifi settings, so that the phone isn’t able to connect to it
Shutdown AAWireless by unplugging it
Shutdown your car completely
Plugin AAWireless again (maybe open and close the door in the car so that the usb plug has power => AAWireless will boot up
Connect to the AAWireless wifi manually
Maybe you get a prompt that asks you if you want to change wifi connection because it has no internet => ignore it
Put your phone into airplane mode, wait 10 seconds
Deactivate airplane mode
Wifi connects to AAWireless wifi
It should now ask you if you want to use mobile data, maybe it takes a few seconds until you get asked
ALLOW it to use mobile data
I had to retry it a few times with switching airplane mode on and off until I got the prompt that it wants to use mobile data.
If it works until here chances are very high that everything will work in then end!
Go to Android Auto app and ACTIVATE „Wireless Android Auto“
Shutdown everything again, unplug AAWireless, shutdown your car and wait a few seconds => all connections should be disconnected
Start your car, plugin AAWireless
AA Wireless and Android Auto should startup as it should and after a few seconds you should get the promt again, that your phone wants to use mobile data => allow it
Android Auto should work now with internet connection
Please let me know if that works for you, too.
Click to expand...
Click to collapse
Okay I tested this with my Poco X3 NFC, it's working!!!!!!!
The reason because I think the AA wireless was sort of authenticated single sign on though Bluetooth and get the all credentials to wifi connection. By doing this xiaomi MIUI it seem remember this as Wi-Fi SSID with the preset password. Let's hope the WiFi password is fix and doesn't generate randomly and issue many times by AA wireless dongle.
By connecting WiFi manual method and key in the WiFi password manually the MIUI threated the WiFi connection like normal router no internet connection. And the android will recall this my duty to tell there is NO internet connection, do you want to switch to data or not?
I think this the difference, using Bluetooth to get WiFi authenticated the MIUI missing feature to check what to switch to data or not.
The other issue is always need to press "use mobile data" everytime start the car and the Wi-Fi connected, otherwise still no internet. Quite inconvenience, i still need to open my phone to confirmed it.