Not being an owner yet, but looking at the various videos on the net it appears that the cable for video out that comes with the device is standard a standard VGA plug.
I would like to team the device with myvu personal media viewer. Can anyone advise whether a yellow, red, white composite cable confguration can be sourced somewhere, or red, white, s-video, or even a 3 way video/audio 3.5" jack, all withn the right plug for the 7500/7501 on the other end?
Thanks for any advice.
See the thread for the 4-in-1 cable.
Thanks a bunch - perfect
Related
I have a little Aiptek t20 led beamer, about the size of a mobile phone, which powers entirely by usb and get's it's visual data by usb.
That thing:
www dot aiptek dot eu/index.php?option=com_product&task=view&lang=en&productid=196
Would connecting the device to the samsung phone require more than just an incredible amount of coding? Or could there be hardware limitations?
It was dirt cheap, and an watching movies from my phone on the ceiling or a wall would just be amazing.
I recently purchased a 3.5mm to video/audio cable for my samsung captivate and I am noticing that the quality of the videos on the 46" LCD TV is not that great compared to when i watch the same videos on my computer. The cable I purchased is a Scoshe brand that I found locally from Fry's Electronics.
Is the sub-par quality due to the phone output or the cable itself? What has been your experiences with TV-Out?
Thanks.
You're using a VGA cable, you'll never get HD quality content. It's akin to trying to run a VHS on your new 46" TV. It'll just never look as good as the HD content you've come to expect in the last few years.
For me, it works well enough on my GF's old 90's tv if we're going to watch a movie or some TV shows. I would never use it on my TV at home though.
dude not vga, rca, aka composite video. composite is a notch above vhs and a notch below dvd. so yeah it's the tv out and the cable.
hopefully the micro usb to hdmi will work on the captivate with a future update. there are reports that it works on the epic. if not you can share with dlna via allshare.
i have a $50 media box thing from netgear and it works but the phone cant push the video to it you can only tick the video for playback (dont add to playlist) and let the other end play the video. also windows media center can be a dlna server and an xbox can play it as a media center extender, the ps3 is also dlna certified. there are also upnp apps in the market that should work with xbox. and ftp and webdav apps that will let you mount the phone as a webdrive or access with a browser. i know many of those options are great in the home but useless for travel and if your home you dont need it anyway.
the netgear device i have is very portable but unfortunately you still need a usb wireless adapter to use it, im sure there are similar devices that have built in wireless but may be more expensive.
Thanks for the respones. Would you suggest getting a "higher quality" cable or am I just basically stuck with what I got? The pictures and videos look blurry (and pixelated) when I view them on the TV and I just want to know if it has anything to do with the cable.
gormander said:
Thanks for the respones. Would you suggest getting a "higher quality" cable or am I just basically stuck with what I got? The pictures and videos look blurry (and pixelated) when I view them on the TV and I just want to know if it has anything to do with the cable.
Click to expand...
Click to collapse
live with it till the usb to hdmi thing works
edit; if the cable feels very thin and fragile it may have poor noise rejection, some are not sheiled very well. also if the you had to mix the colors around to get it to work that's not good. video cables are a different impedance so you need to use the yellow one for video. i know 3.5mm av cables dont follow a standard format and i dont know if you had to mix and match connectors to get a picture. but on a 46 inch tv you wont get good quality no matter how high the cable quality is, it's just an old inferior technology and why the make s-video, componant video, vga, dvi and hdmi.
I have a 46 inch LCD and have attached the phone to it. A HD movie looks ok, but not near as good as running via the PC at 1080p via HDMI. When and if they get the microUSB to HDMI working, we should see an improvement.
I bought:
e bay.com/ws/eBayISAPI.dll?ViewItem&item=250730349349&ssPageName=STRK:MEWNX:IT (remove space between e and bay)
I'm running
Captivate 1010 w/ leaked DG Froyo 2.2 ROM (no custom ROM, just the vanilla leaked 2.2)
YES I enabled TV out in display
That TV out cable did not work to either my A/V receiver nor my TV. Audio worked to both TV and receiver but no video. I swapped cables around to make sure video wasn't accidently a different color.
Then I remembered my HD camcorder (Canon HG21) had a similar 1/8th inch -> composite adapter so I tried it but it did work but red = video, yellow = right, white = left
No big deal, but it did work. The video did not work on my receiver but it did on my two TVs. So I've found a working solution
Just puzzled why the eBay cable's video didn't work, even on the TV.
Answers? Thanks
AVS420 OUT
I got a cable off of Amazon - OEM for 13 bucks. works great. Maybe they just messed something up inside.
Page not found, rip off maybe?
Make sure your tv out settings are correct. Try both PAL and NTSC
I have 3 cables and only one works. Someone mentioned (in another thread) that the impedance on the video cable is different then what is found on the audio cables - or it is supposed to be - the cables that don't work probably have all 3 individual lines made the same.
I order one off Amazon for $0.94. Works great. Search for "Macally Audio and Video Cable for iPod classic 4G, 5G, 5.5G (White)"
Got it in a few days. I'd post more info but...
Ok I'd like to know if an HDMI to composite converter will work with chromecast...?? And I have some answers.
An HDMI to VGA converter . i can confirm that definitely DOES NOT work.
An HDMI to composite (cvbs) converter DOES work. I have one of the cheap small square white ones you see a lot with phono audio outputs and the yellow av out. it requires USB power to give me a signal so sorting out 2 USB ports for use with a CC is a minor pain.
Picture quality is clearly not close to Hdmi , think 'fuzzy'. but on our lcd, with a boost of saturation, noise reduction etc watching material is perfectly acceptable. Sound seems good as I'd expect.
Problem is our TV has HDMI but no hdcp (dont ask) rendering it mostly useless and new TV is not on the cards yet, so this has helped.
Sent from my Nexus 7
http://forum.xda-developers.com/showthread.php?t=2393029
Sent from my XT897 using XDA Premium 4 mobile app
Taa, however not super helpful as there's only one post with a definitive 'yes it works' not specifying what was being used, rest is conjecture and fluff. But positive signs.
Consider this the fluff-free thread on all non HDMI solutions
Have Ordered HDMI to composite so will update on success and type of unit.
Sent from my Nexus 7
I updated OP with findings.. HDMI to composite works, had a few flake outs reboot seemed to sort. picture ok/acceptable
Sent from my Nexus 7
bkmaracas said:
Ok I'd like to know if an HDMI to composite converter will work with chromecast...?? And I have some answers.
An HDMI to VGA converter . i can confirm that definitely DOES NOT work.
An HDMI to composite (cvbs) converter DOES work. I have one of the cheap small square white ones you see a lot with phono audio outputs and the yellow av out. it requires USB power to give me a signal so sorting out 2 USB ports for use with a CC is a minor pain.
Picture quality is clearly not close to Hdmi , think 'fuzzy'. but on our lcd, with a boost of saturation, noise reduction etc watching material is perfectly acceptable. Sound seems good as I'd expect.
Problem is our TV has HDMI but no hdcp (dont ask) rendering it mostly useless and new TV is not on the cards yet, so this has helped.
Sent from my Nexus 7
Click to expand...
Click to collapse
Calrad makes an HDMI to Component video adaptor that should work for you, providing your TV has component video inputs. part number is 40289. It should cost around $179 retail though, so my recommendation would be to take the $150 and invest in a newer TV!
I have a Chromecast connected to an old Sony 20-inch 4:3 (not widescreen) tube standard definition TV with only S-Video and Composite inputs.
Here's how mine is connected:
Chromecast
HDMI to HDfury2 Component (bought for I forget... more than $100 a long while ago, from a previous setup)
Component to AVT-3190 HD/VGA to Component/S-Video/Composite down converter (bought for $119 used on eBay)
S-Video to TV
Audio (analog) to TV
Both the HDfury and Chromecast require USB power, but I have them both connected to an iGo MicroJuice power adapter that has 2 USB outputs ($9.99 from Best Buy clearance).
The down converter has a wall wart too, so it's 2 power plugs.
Result:
Video
It's a bit fuzzy, but what do you expect for 720p/1080p being downconverted to 480i?
Aspect ratio is correct, because the AVT-3190 down converter has switchable aspect ratio conversion (ARC), so not only is my video downscaled to 480i, it's also being letterboxed, so the vertical resolution is even less than 480i for widescreen casts. This wouldn't be a problem if you have a widescreen display.
Audio
Is fine. I'm getting analog output from the HDfury2. It also has optical digital output, but I haven't tried it as I'm just using the TV speakers.
What doesn't work:
Automatic power/input control via HDMI-CEC. Obviously this doesn't work because HDMI-CEC isn't supported by the HDfury2 as there's no way to translate that into its just video and audio output.
Given that this is about $200+ of gear to make a $35 device work, it's probably not smart. But my case is special, and I'm sure there are others with special cases as well (projectors, in-wall displays, etc), so there you go.
If you have a HD-capable display that just lacks an HDMI input, you would just need the HDfury2, not the down scaler, so that cuts the cost in half. That's how Chromecast works with my old HD projector.
Hi All,
So I had what I thought was the genius idea of buying a Chrome Cast to hook up to my old projector for instant Netflix et al. cinema in my living room, it's all set up... screen, speakers everything but there's just one small problem, no picture.
The reason it isn't straightforward forward is that my projector is old enough not to have an HDMI port, though it does say that it supports HDMI on it's DVI port using an adaptor. (Which I can't find). Also of course I'd have no sound.
What I have...
So with a little research I bought this HDMI to VGA + 3.5mm Jack Audio Cable Video Converter Adapter, I also bought a couple of gender changers, one VGA and one HDMI to get the whole lot to stick together.
The projector is an Optoma ThemeScene H57, so quite old but actually pretty decent (hence reluctance to take the plunge on a new one and also because this was supposed to be a cheap project)
What is happening...
What I'm experiencing is a black screen, which I am now attributing to HDCP problems... the projector scans and detects that there is a source plugged in the way you'd expect and looks like it's gone through the process of adjusting to that source signal and then just happily displays a black screen. Occasionally it also says "Out of Range". The sound comes out garbled when trying to play netflix or youtube.
I have tried it with a VGA to DVI adaptor into the DVI input to witht he same result.
I have also tried plugging my Nexus 10 into the HDMI input on the convertor, this yields a different result, white static, but still no picture.
The projector does work... it's even briefly displayed a chrome logo when I tried factory resetting the Chromecast while it was plugged into the projector (via the adaptor obviously) but then just returned to the black screen.
A weird caveat to all this is if I play something on Play Music then I still get a black screen but the sound comes out fine.
What I plan to try
I read that HDCP can cause problems like this and that it can sometimes be fixed using a powered HDMI splitter. Apparently this negotiates the HDCP handshake with the Chromecast and then passes on the signal to the two output ports, which sounds a bit dodgy, why is it so simple to bypass? Plus it's £30 for one of those which means my cheap project is getting more and more expensive.
So...
Any help on this would be really REALLY appreciated. Please.
Crin said:
Hi All,
So I had what I thought was the genius idea of buying a Chrome Cast to hook up to my old projector for instant Netflix et al. cinema in my living room, it's all set up... screen, speakers everything but there's just one small problem, no picture.
The reason it isn't straightforward forward is that my projector is old enough not to have an HDMI port, though it does say that it supports HDMI on it's DVI port using an adaptor. (Which I can't find). Also of course I'd have no sound.
What I have...
So with a little research I bought this HDMI to VGA + 3.5mm Jack Audio Cable Video Converter Adapter, I also bought a couple of gender changers, one VGA and one HDMI to get the whole lot to stick together.
The projector is an Optoma ThemeScene H57, so quite old but actually pretty decent (hence reluctance to take the plunge on a new one and also because this was supposed to be a cheap project)
What is happening...
What I'm experiencing is a black screen, which I am now attributing to HDCP problems... the projector scans and detects that there is a source plugged in the way you'd expect and looks like it's gone through the process of adjusting to that source signal and then just happily displays a black screen. Occasionally it also says "Out of Range". The sound comes out garbled when trying to play netflix or youtube.
I have tried it with a VGA to DVI adaptor into the DVI input to witht he same result.
I have also tried plugging my Nexus 10 into the HDMI input on the convertor, this yields a different result, white static, but still no picture.
The projector does work... it's even briefly displayed a chrome logo when I tried factory resetting the Chromecast while it was plugged into the projector (via the adaptor obviously) but then just returned to the black screen.
A weird caveat to all this is if I play something on Play Music then I still get a black screen but the sound comes out fine.
What I plan to try
I read that HDCP can cause problems like this and that it can sometimes be fixed using a powered HDMI splitter. Apparently this negotiates the HDCP handshake with the Chromecast and then passes on the signal to the two output ports, which sounds a bit dodgy, why is it so simple to bypass? Plus it's for one of those which means my cheap project is getting more and more expensive.
So...
Any help on this would be really REALLY appreciated. Please.
Click to expand...
Click to collapse
I'm afraid the only solution is to get an HDCP compliant projector...
CCast will only pass on HDCP info from the Device it is plugged into, but has no HDCP of it's own. And it can not be faked.
The Adapter will also break any HDCP as HDCP is meant to deny you the ability to do what your trying to do in the name of not letting you make copies of the content.
You will be fine with Content that does not require a HDCP signature to play (self ripped movies or non-DRM materials) but something like Netflix has little chance of working without some HDCP compliant device being connected the the CCast.
You can get a standard HDMI DVI adaptor for cheap, and maybe this will allow HDCP information to be kept. However you may be unable to keep the audio stream without a more elaborate device.
Sent from my Nexus 5 using Tapatalk
According to this page...
http://www.projectorcentral.com/Optoma-H57.htm
It is actually HDCP compliant... so does that mean it's the adaptor that's breaking it? Is there such a thing as an HDCP respectful adaptor with an Audio splitter?
Crin said:
According to this page...
http://www.projectorcentral.com/Optoma-H57.htm
It is actually HDCP compliant... so does that mean it's the adaptor that's breaking it?
Click to expand...
Click to collapse
Yes you're essentially converting a Digital signal to analog and HDCP only works via Digital.
A Real HDMI to DVI adapter as suggested may help but make sure in the specs it says it will pass HDCP.
And do make sure it also has Audio Breakout.
Crin said:
According to this page...
http://www.projectorcentral.com/Optoma-H57.htm
It is actually HDCP compliant... so does that mean it's the adaptor that's breaking it? Is there such a thing as an HDCP respectful adaptor with an Audio splitter?
Click to expand...
Click to collapse
Your projector is a little newer than my Sony VPL-HS10, but it might have the same issue - the marketing wasn't 100%. My VPL-HS10 initially said it was HDCP-compliant on the DVI-D port, but ended up that it isn't. Well, it might be for a few select devices, but it isn't up-to-spec for the general standard.
What you really need is an HDCP stripper, but those are illegal in most parts (especially the US).
Your other potential problem is that the adapter may not be converting the HDMI timings over to VGA, and rather expecting the receiving device to compensate. Some can, some can't.
The specs for your projector says it has a DVI-I port, so it might accept analog on that port.
So first I'd try connecting DVI-to-VGA adapter (the ones that normally come with video cards to get VGA out of the DVI port) and connecting Chromecast --HDMI--> HDMI-to-VGA --VGA--> DVI-to-VGA adapter --DVI--> Projector and see if you get a different result on the DVI input - sometimes the scaler is separate or different for different inputs.
If that doesn't work, I recommend HDfury2 or newer - beware of counterfeits as there are many fakers online. I have successfully used HDfury products with my Sony projector from various sources. You'll want the HDfury2 or newer to get the audio breakout, which is a 3.5mm (1/8-inch) analog stereo and digital (optical TOSlink).
bhiga said:
What you really need is an HDCP stripper, but those are illegal in most parts (especially the US).
.
Click to expand...
Click to collapse
Not to mention probably as expensive as a new Projector with HDMI and HDCP support! LOL
Crin, did you ever get this solved?
I bought the same stupid converter you showed in the image.