Related
Looks cuwl but I think it would be better without the beltclip:
http://www.innopocket.com/EShop/Main/product.php?ID=63
If you are looking for a sleeker look check out www.proporta.com, they have a design in development , hence the special offer, but you will have to wait a while for the alu case about a month or so, but hey who's complaing when you get freeby!
roko said:
Looks cuwl but I think it would be better without the beltclip:
http://www.innopocket.com/EShop/Main/product.php?ID=63
Click to expand...
Click to collapse
just got one! its really cool and sleek design... :lol:
I ordered the Proporta about 6 or 7 weeks ago. I received nothing since then (apart from the useless neoprene wallet). Looks like it's going to be a long time before it is finnished. I think the Inno looks far better too. I'm thinking about ordering one instead of the Proporta.
Damoncarl, could you please tell if the beltclip could be removed without to much damage?
Does the case have enough room for the extended battery?? 8) thinking of getting one if the proporta case doesn't have room, by the end of the design reveiws... and it looks like you have to keep removing from the case just to charge or use it.
It looks that neither have room for the XDA+battery.
Both the Inno and the Proporta have their pro's and con's. I think the Proporta is better for daily use, you don't need to remove the XDA from the case before usage. The Inno on the other hand gives far better protection since it completely encloses the XDA.
roko,
judging from the design I can't see how the xda can be used/charged from the case, asking cause that's the way I use mine, and everybody uses their case differently...the Inno case looks to provide better protection, (I have four cases I use depending on my daily use, guys tend to stick to one case, women tend to co-ordinate the cases with their outfits and bags!!) and your right in the respect that the Inno looks good, but as always, looks don't mean a thing if it aint practical (men inclusive in my opinion :twisted: ) and as you already have the case I'd rather pick your brains on it than have a sales person deliberatley trying to sell me something based on looks....
The Proporta has an opening at the bottom so I guess you can sync/charge and replace the smartcard without having to take it out of the case. Here's a better view...
http://www.proporta.com/Zoom.asp?id=XDAcase1.jpg
But still, it is in developement, images of the final product are not online yet (I asked for them but no response so far). The final product could differ. Wait and see
And so my choice is confirmed, da girl goes proporta! spoke to them today they say no to the batttery space but I guess I can't have all
Hopefully you won't get bored waiting for it (like me) :wink:
Did you by any change asked them when the case should be ready for shipping? I keep hearing "probably the next week" :?
roko
Yep, I did ask and was told not for ages as they just rejected the proto-type last week, apparently because you would have to remove the xda from the case for charging etc and that's not what was agreed to design wise....the guy I spoke to was so annoyed he told me not to bother ordering it yet!!! to wait a month but I will... just to have yet another case to co-ordinate.
(as women do :wink: )
Another month
I'll order the Inno so I'll have atleast one case (for the time being) :wink:
I've got one (the innopocket case) and I'm very Impressed with it. Although like anything its not perfect.
Here goes an honest review.
If you think the xda is already too big, dont buy this. If you want to protect your machine while carrying it - its like having an armoured tank protecting it! Imagine your dads old tobacco tin in brushed aluminium with a neoprene 1.5mm lining and there it is.
Its very well built - it does have a serious "no messing about belt clip" that you'd have to have serious impacts hit by a car for it to fall off. I'm a cyclist (during the week ; ) - so you'll have to excuse my practical thinking!
I think the only serious damage you could do would be to the antenna, which is the only potruding part, and even then, if it was on your belt that would never happen.
I did however make one major "mod" when I got it, I got out an electric drill and file and made a headphone socket hole straight away!
Being made of aluminium its very easy to do this, in theory you could do the same for the charger connector.
Street Cred
Although its very practical, to be frank I'm embarrased to carry it in "open view" on my belt, because it is ridiculously large. Under your jumper or jacket it acceptable. Or in your baggy Jeans pocket is another fine alternative.
In use
I even answered a few calls while listening to Mp3s in slough town centre last week, obviously the nice thing is that with the standard handsfree headset you can answer the call with the button on the mic pod, and not have to get the damn thing out of the case. Obviously in normal phone use its a pain to "unholster"
I think the main oversight is a lack of a charging hole, I think a pda on a desk with a charger lead hanging out of it is asking for trouble, one slip and your "preciousss" will go swinging to a clattering smash onto the floor, so I'd love to encase it with the innopocket during charging. (I'm getting the drill & file out now!)
Opening it Up
It did seem too much hassle to change tracks on media player by "getting it out of my pocket, opening it up, changing tracks, and closing it etc. So I just listened to my mp3s on "shuffle mode" it would be great if one was designed with buttons integrated into it, perhaps so it slots into the bottom edge connector in the same way as the clip on keyboard.
At times like that I was glad of the volume control on the headphone kit!
The opening up catch is nice and firm, so its very difficult for it to open accidentally, and as it opens "upwards" in theory as long as you are standing or sitting, it wouldnt fall out.
One of my friends did force it open because he didnt understand the way it opens, but in actual fact its made the case easier to use, because the stress exerted on the aluminium hinges if you do this enable you to open it further, to about a 80 degree angle from the closed position. This means that if opened on your belt the xda delivers at 45degrees or so.
Build Quality
I think in terms of build quality it is excellent, and certainly does protect the machine All edges were finished off smoothly, all neoprene stuck down well, definately a quality product.
Capacity
Havent tried it with the extended battery, as it hasnt arrived yet, I'll let you know if it fits, or if it can be modified.
Advantages
1) serious protection
2) serious beltclip that wont fall off in usage
3) Aluminium, lightweight, tough, and easy to mod!
4) Website order to Delivery time (under a week) and thats delivering it by airmail from suppliers in Hong Kong.
Disadvantages
1) Overall Size (too big and roomy - I'd prefer a snugger fit!)
2) Beltclip: My only criticism is that the belt clip cannot be removed, its riveted on, and being aluminium, if you removed it I guess you'd never get it back on. Otherwise its the best engineered beltclip I've ever used, I wish my old Cooltrax mp3 player's case had such a good one.
3) the only downside of course is removing it from the holder. to use it, its not exactly "quick release"
4) usual packaging problem though, when it arrived it looked like it had been opened a dozen times en route, cardboard box was creased and torn "open", but the product was intact and undamaged - I guess customs at several points opened it up to see what it was. You'd hope they'd stick tape back over it. I'd hate to send anything of a greater value that distance!
Opinions
Buy two. One for "on your belt" (modding it for headphone hole)
The other for in a bag or pocket, with the belt clip removed! and mod it for charging/mp3 playback.
The one thing I like about it is that it doesent spoil the look of the thing itself when you're actually using it. The standard O2 case sucks in that regard, and looks disgusting in my opinion. And lets face it the most dangerous aspect of using a phone/pda is putting it down. e.g. falling asleep with it on your lap or chest, or even charging it up.
When its in your hand you hang on to it for grim death. Putting it into the case is the riskiest part, especially cycling along, but hey, even doing that on a pavement is a big risk! And as I mentioned this was a doddle!
Walking along and holstering it is more of an embarrassment risk than a risk of dropping it because as I mentioned, it opens very sensibly.
Possible Improvements...
1) add a hole for charger
2) add a headphone hole
3) make the belt clip removable
4) make it less "thick" (width wise)
5) slots for memory cards inside the case, although there's plenty of room to just have them "floating around" - that said, would you risk an £80 memory card dropping out while you're walking.
6) add a button for skip track for when in mp3 usage
Conclusions
Protection 98%
Practicality 40%
Style 30%
It does "what it says on the tin" :lol:
"protect your investment"
Can you please provide a cost for the aloy case for the xda & approximate delivery cost to Australia
Thanks Peter
Follow the previous mentioned link http://www.innopocket.com/EShop/Main/product.php?ID=63 and you will see the price.
I fully agree with Derek's review but like to add a couple of disadvantages:
1) The spring mechanism started to wear out in the case I had. I had to bend them back into shape.
2) Although perfectly padded on the inside there is the possibility of having the metal on the inside come into contact with your screen. Maybe it is just me being clumsy but I was nervous every time the XDA went into or out of the case.
I stopped using it and it is lying around somewhere here.
Robert[/list]
Mine's now laying around as well... climber!
Unfortunetely it wont accommodate the extended battery
Update on the Proporta hardcase:
It seems that the first 1000 will be shippped early July. Hopefully I will be one of the lucky bastards because I'm waiting for it since last January.
http://www.proporta.com/Zoom.asp?id=Alu_XDA.jpg
Hmm... Re the Proporta case, it looks like someone else had my idea about holes for connectors!
It looks a bit slimmer than the innopocket. I'm hoping it has a cutout in the back to allow for the extended battery to poke out as well...
Somehow I dont think they will think of that one, otherwise it looks a much better design. Do let us know with a full on review when you get it Roko....
Hi I got the ali case, the thing is almost twice the width, but I really needed to stop the XDA from crashing out of my pocket, so I tried it for a few days, its like an ejector seat, My xda has hit the ground 6 times in one day, I lost my pen & a big card I had in it. Sorry it has gone in the draw.
Hi, i got my proporta ali case this morning - seems quite nice Very light and doesn't bulk up the device too much! Very strong too, no way i'll loose the screen with this baby on. All connectors/buttons can be got to with the case closed.
Will test it over the next few days!
New Horizontal Leather Case for the HTC Advantage X7510, X7501, & X7500 by NUTSHELL
New Horizontal Leather Case for the HTC Advantage X7510, X7501, & X7500 by NUTSHELL
Nutshell: http://tuff-as-nuts.com/index.asp?PageAction=COMPANY
I had contacted Nutshell regarding a customized Horizontal Case (black) that will fully enclosed the HTC Advantage X7510 with the leather pouch included about 2 months ago. I was able to get intouch with Ian Miller and was basically received with open arms. I was asked to submit my design and the dimensions.
The dimensions are: 5.8 inches (lenght) x 4.4 inches (height) x 1.30 inches (depth).
It is closed by a velcro flap that fully covers the top of the case preventing any accidental exposure to the elements.
The back of the case has the D ring and metal belt clip lined with leather. But in all honesty, I think it would have looked better if the metal clip was left without the leather strip cover. It would looked nicer if the silver finish of the metal clip was shown rather than hidden.
But all in all, the case is very well made. The stitches and cuttings were done right and very clean. The case will protect the X7510 and it's leather pouch while having the ability to clip it to your belt or trousers on the go.
I paid $95.00 for the case, but it may become cheaper if it will be popular.
I have attached pictures for you guys and gals to check. I believe NUTSHELL will mass produce them if the demand is high enough.
THANK YOU NUTSHELL (Ian) for a case well done.
Feel free to ask questions...
Added Pictures...
Added pictures...
nice find as i just bought myself another case but this one i like a lot better although the case i bought was only $49
Thanks Christian. Glad to help.
As this was a prototype, we have not yet given it a part number...but we shall and then post it to our catalog.
With your blessing I"ll use some of the images you have posted here.
Obviously we shall try to price it right, but as the first few will, like this one, be hand cut, pricing will have to stay the same in the short term.
However, if there is an interest (and it has to be considerable to make it worthwhile, we'll likely look at getting the assets that will enable us to run off some volume).
That said, it really is over to the community to determine if this product gets wings...or....?
A suggestion: Maybe someone could open a book to register interest (bulk purchases work best and enable us to finetune our pricing). As I am not a regular on this forum, maybe that someone could run point for me on this.
So it really is over to you guys.
We'll do what we can.
All the best.
nutshell said:
With your blessing I"ll use some of the images you have posted here.
Click to expand...
Click to collapse
Yes of course. Feel free to use it.
cktlcmd said:
Yes of course. Feel free to use it.
Click to expand...
Click to collapse
Nutshell,
Very well taken pictures indeed. Looks like real good quality pouch. Is it made to custom sizes? I normally carry my device without the keyboard, so it is quite a bit thinner and smaller. What would be the total cost shipped to Australia?
Also, a question for cktlcmd. Currently, I have a soft pouch, and taking it out is easy, as I can squeeze the soft pouch to push out the device. With a hard leather one, I imagine it is not easy to squeeze the bottom to force the device upward, so one would have to lift it up. Would that be easy? Or would the device be too slippery for that, even that I carry it naked?
eaglesteve said:
Also, a question for cktlcmd. Currently, I have a soft pouch, and taking it out is easy, as I can squeeze the soft pouch to push out the device. With a hard leather one, I imagine it is not easy to squeeze the bottom to force the device upward, so one would have to lift it up. Would that be easy? Or would the device be too slippery for that, even that I carry it naked?
Click to expand...
Click to collapse
In my case, since it also houses the X7510 with keyboard and the leather case, it is not slippery at all. It is easy to grab it on top and just pull it out. The case itself is not made of really hard leather plus it is lined inside with felt like skin to protect the device from being scratched by the case itself. The technique I use to get it out fast is to pull on top and press each sides of the case because that is where I notice the greatest hold on the device occurs.
In your case, since you will probably want Nutshell to adjust the measurements to accommodate just the device, it won't even be a problem because of the soft felt lining, it will just slid easily in and out.
It trully is a nice case. I wish they had designed it like this from the start.
nutshell said:
Thanks Christian. Glad to help.
As this was a prototype, we have not yet given it a part number...but we shall and then post it to our catalog.
With your blessing I"ll use some of the images you have posted here.
Obviously we shall try to price it right, but as the first few will, like this one, be hand cut, pricing will have to stay the same in the short term.
However, if there is an interest (and it has to be considerable to make it worthwhile, we'll likely look at getting the assets that will enable us to run off some volume).
That said, it really is over to the community to determine if this product gets wings...or....?
A suggestion: Maybe someone could open a book to register interest (bulk purchases work best and enable us to finetune our pricing). As I am not a regular on this forum, maybe that someone could run point for me on this.
So it really is over to you guys.
We'll do what we can.
All the best.
Click to expand...
Click to collapse
I am very interested!
Another case?
eaglesteve said:
Very well taken pictures indeed. Looks like real good quality pouch. Is it made to custom sizes? I normally carry my device without the keyboard, so it is quite a bit thinner and smaller. What would be the total cost shipped to Australia?
Click to expand...
Click to collapse
I have listed the product for the x7510 in our catalog:
Horizontal belt case for HTC x7510
Sure, we can make you a slimmer horizontal case.
Costs would be the same.
We would need the dimensions without the keyboard.
Shipping to Oz from NZ depends on how quickly you would want one.
Contact me through the website.
tuff-as-nuts.com
Will the 7510 case also fit the 7500/7501? My understanding is that they are the same dimensions... Anyone know offhand?
Thanks for the topic
Have anyone ever seen a vertical case for X7500 for the use without the external keyboard?
This is a bit off-topic, but personally I find the HW keyboard to be the ultimate screen-protector and would not dream of leaving home without it (even though I use my Advantage in portrait-mode 95% of the time).
On-topic again I would guess that one could use any case made for the 7510 WITH keyboard as this unit is just a bit thinner than the original 7500/7501.
trondkk said:
This is a bit off-topic, but personally I find the HW keyboard to be the ultimate screen-protector and would not dream of leaving home without it (even though I use my Advantage in portrait-mode 95% of the time).
On-topic again I would guess that one could use any case made for the 7510 WITH keyboard as this unit is just a bit thinner than the original 7500/7501.
Click to expand...
Click to collapse
No. The keyboard is the most effective way to ruin your device with scratches. Take it away if you want your unit to look new all the time. If you really must have the keybaord, put a piece of cloth between the unit and the keyboard to prevent them from rubbing against each other.
We have different experiences then eaglesteve. I have used my HTC X7500 for well more than a year with the original book cover (with the 3 clips) and have only miniscule scratches on the keyboard itself, not on the main unit.
I now also have the Piel Frama Case (since a month ago) and with this case it would be even more difficult to scratch the unit with the keyboard.
And even if this was NOT the case I would much rather have endured a scratch or two than having my screen broken due to a fall or pointed item pressing against it (even in the pouch). The solid steel of the keyboard over the screen gives me an ease of mind I will not trade for the sake of a marginally smaller "package" to carry around.
And now, with the vertical Nutshell-Pouch I hope to enjoy my Advantage X7500 for a long time since no better device (for my needs) seems forthcoming from HTC or any other manufacturer.
I agree with eaglesteve - I've had more scratches/rub-marks from the keyboard than from anything else. Keeping the keyboard as a screen protector is a non-issue, just make sure the screen faces towards your body when its in a pouch, or in a pocket. On the weekends I leave my Nutshell and the keyboard at home, and just face the screen towards my leg in my pocket.
techntrek said:
I agree with eaglesteve - I've had more scratches/rub-marks from the keyboard than from anything else. Keeping the keyboard as a screen protector is a non-issue, just make sure the screen faces towards your body when its in a pouch, or in a pocket. On the weekends I leave my Nutshell and the keyboard at home, and just face the screen towards my leg in my pocket.
Click to expand...
Click to collapse
Here you can find a scratch proof leather case. Also cheap and black (more elegant) colour.
http://cgi.ebay.co.uk/ws/eBayISAPI....m=370063633176&ssPageName=STRK:MEWN:IT&ih=024
finally after many, many tries, a case that really works. well made. beautiful. sturdy. i got the mag lock. very nice, highly recommended.
Well... I just order mine from Spain... 10/14 days to wait... will see. I'm risk 99.95 USD on it.
I just receive the confirmation email... good signal, my VISA still works.
Received last week.
Well finished... and the quality is according the price.
The X7500 fits perfectly even with it's case. Since I'm not placing the X7500 in the case with the original one there is place for my backup battery.
Great job Nutshell
This case is nice! But I always wanted a case that would allow me to hold my X7500 without the keyboard,so it would look like a slim and supersized-screen IPOD! That I can put into my pocket easily..like an IPOD.
So, I have a question for Nutshell: can you build us one? But I can someone here volunteer to provide some dimentions for an X7500 or X7501, coz I really sucked at the whole designing and measurement thing, afraid I would screw up the whole thing.
I'm interested in the above mentioned case from Swiss Mobility. Anyone here with experiences to share with this case (used together with X1)? I can't find a distributor in Europe - anyone knows where to buy it in Europe? (I know BestBuy has them, but the nearest store is 6000 miles away and shipping is twice the cost of the case). Swiss Mobility's web site hasn't worked for some time. Anyone knows what's up with that?
http://www.xperiadepot.com/swiss-mobility-legion-smartphone-case/4A80A3757.htm
They ship to Europe with courier service (3-5 days) for 25 usd. same price for the case so I suppose its worth it if you want to order together a couple more accessories.
currently unavailable
Looks great, too bad it's unavailable!
They are probably unavailable because Swiss Mobility went under the radar.
How exactly are carrying cases worn?
I've seen people wear carrying cases only a scarce amount of times, and I totally forgot how people manage to wear these.
I have a carrying case for my phone (not the Xperia), and it is so bulky! It's for the Samsung SCH-i760 btw. Anyways, so this is how I wear it: I basically use the "clip" to clip onto my belt, but I notice it is so bulky.
So when I usually wear shirts that cover almost pass the fly/zipper of my pants. And when I try to pull my shirt down to cover my pant, it covers the damn thing, and it looks like I got big tumor on the right or left side of my stomach.
So then I clip it on my pocket, it looks better, but now the pong hangs more loosely. It's kinda funny how these carrying cases rarely have a model for them to wear the carrying case, this is because companies know that it's freaking ugly to carry these things, ugly = no sales.
So if I am doing it all wrong, and if I am wrong that it's freaking ugly, then tell me this: what is the proper method of wearing these damn things?
poetryrocksalot said:
How exactly are carrying cases worn?
I've seen people wear carrying cases only a scarce amount of times, and I totally forgot how people manage to wear these.
I have a carrying case for my phone (not the Xperia), and it is so bulky! It's for the Samsung SCH-i760 btw. Anyways, so this is how I wear it: I basically use the "clip" to clip onto my belt, but I notice it is so bulky.
So when I usually wear shirts that cover almost pass the fly/zipper of my pants. And when I try to pull my shirt down to cover my pant, it covers the damn thing, and it looks like I got big tumor on the right or left side of my stomach.
So then I clip it on my pocket, it looks better, but now the pong hangs more loosely. It's kinda funny how these carrying cases rarely have a model for them to wear the carrying case, this is because companies know that it's freaking ugly to carry these things, ugly = no sales.
So if I am doing it all wrong, and if I am wrong that it's freaking ugly, then tell me this: what is the proper method of wearing these damn things?
Click to expand...
Click to collapse
Tuck your shirt in.
beware magnets
that swiss case uses a magnet, when i had a case that used magnets i found that when i got a call the phone would wake up and as the phone passed by the magnet when getting it out it would think that the slide had been activated and rotate . by the time this happened i could not answer the call in time and it went to messaging.
This may have been more of an issue with some of the earlier roms that I was using that were quite slow to rotate.
you might be able to work round this depending on the strength of the magnet and/or what orientation you put the phone in the case.
I bought a case that is secured by velcro to avoid this problem, however a couple of months later the velcro has worn out and does not stay closed. I may get my old magnet case out again and see if the new faster roms are better at coping.
i want get this case so long already where i can get it?
Hey guys, I was just about to purchase this case but then started wondering if it would adversely affect my signal strength so I thought I would jump on here and see if any of you have used an aluminum case and what the results were...
Thanks for any info, you guys rock!
It has a very good possibility of affecting the signal since the antenna will have a clunk of metal around it. But I dont have any first hand knowledge. Why not just get a plastic case. They effect it less.
I really want a case that has a door with a window on it..do you know of any plastic one?
Anyone else have any experience with aluminum cases?
Perhaps I am a pioneer in the area of aluminum cases and the HTC Mogul...or perhaps no one is paying attention to this thread because it's posted in the wrong area. I don't suppose an admin could move this over to the accessories sub forum could they.
Aside from this, where is the antenna located in the mogul? I'm thinking that if I do end up with signal issues I will cut slits the length of the antenna in the case.
Any info on this would be greatly appreciated!
conradcliff said:
Perhaps I am a pioneer in the area of aluminum cases and the HTC Mogul...or perhaps no one is paying attention to this thread because it's posted in the wrong area. I don't suppose an admin could move this over to the accessories sub forum could they.
Aside from this, where is the antenna located in the mogul? I'm thinking that if I do end up with signal issues I will cut slits the length of the antenna in the case.
Any info on this would be greatly appreciated!
Click to expand...
Click to collapse
Sounds pretty cool, can you link us to the particular case mentioned? Other than that I have no experience with metal (aluminum is considered a metal for the banterers) cases either. Personally I would stick to plastic, but sounds neat.
There's a link to it in the first post, but here it is again.
I've been walking around with an ipaq 2215 for the last 5 years with an aluminum case and that thing has saved my life on many occasions.
The plastic would be ok too I think, but only if I could find one that had a door that closed over the screen..
Who do you think I should talk to to get this moved over into accessories? I didn't even realize there was an accessories category when I posted this..
conradcliff said:
There's a link to it in the first post, but here it is again.
I've been walking around with an ipaq 2215 for the last 5 years with an aluminum case and that thing has saved my life on many occasions.
The plastic would be ok too I think, but only if I could find one that had a door that closed over the screen..
Who do you think I should talk to to get this moved over into accessories? I didn't even realize there was an accessories category when I posted this..
Click to expand...
Click to collapse
That case is awesome. I really like it. Interested to see if it ruins the signal quality, or possibly enhance it lol I dont know.. It looks properly designed, I am sure the manufacturer took the antenna location into consideration. I would go for it. Let me know how it works out, hopefully by then one is still available. I can grab one myself.
I will have this moved for you.
Thanks for getting this moved for me Ryan..yeah, I think I'm going to purchase the case within the next few days unless someone pipes in with a negative review.
In the meantime, does anyone know where the antenna is located in the 6800?
Thanks for any help!
So, I came in here to bump the thread up one more time before I bought the case, but it was still at the top...doesn't seem like people are too concerned about Titan accessories any longer
I guess 150 views is enough though, I think I'm just going to bite the bullet and buy.
Will update once I've tested in the low signal areas that I frequent.
I had the exact same case for my xv6700 and never had any signal issues. The case worked well and kept my 6700 looking brand new!
I really liked the lexan screen cover.
I tried the seidio rubberized case for my titan. it worked awesome for about 10 months until the little tiny tabs that held it on broke off. Only a 90 day warrenty so SOL. Now I use a cudora pouch.
So let me know how the aircraft aluminum one fits!!
That's great to hear! I'm going to order it tonight and maybe upload some pics when I get it..
hi conradcliff
dont forget test review the case (how about the look, size etc) and upload the pict, i want to buy also, but it seems need 2 week to deliver it to my country
Oh I most certainly will..I'll also post the coupon code they gave me for 10% off, hopefully it will work for anyone.
Initial Review: Monaco Aluminum Case for Mogul/6800
Short answer: A well designed, sturdy case well worth the ~ $20 price. I'll add some photos soon. Sorry if I stepped on anyone's toes who intended to write one of these up, but hey, two opinions are better than one!
I've had three of these cases for three separate Sprint 6800's. Two black, one silver. For those familiar with Monaco Aluminum Cases (they made/make these for other phones, such as the 6700), this embodiment is just as good.
Pros:
Very solid design - this case can easily outlast the life of your phone. Aside from slight exterior discoloration, dings, and scratches, this case should easily withstand all normal, day-to-day use.
Inner liner - this case includes an inner liner made of neoprene that protects the phone from minor scratch/abrasion marks; that provides a very snug fit for the phone; and provides *minimal* fall protection. Two-story drops and projectile usage by angry girlfriends are not protected.
Access - the case provides access to all buttons, dials, interfaces (except for touch screen & slide-out KB). Luckily, almost all functionality of this phone can be effectuated without the touch screen (not the TP, grrrr), so you will not have to open the case too often, which is very nice. When you do open the case, the keyboard slides over the open top of the case nicely.
Vents (Air/Signal) - there are vents on the top, back, and right side of the case for air and/or signal paths. I've experienced no signal difference, or even heat difference, with this case. I'm sure it does insulate the phone to some degree, but it's minimal.
Belt Clip - the case comes with a belt clip and swivel that are relatively secure and convenient. I've had one belt clip split (the plunger portion), but it is still very usable. You don't have to use them, but I do. The round swivel that screws into the back of the case provides a nicer grip of the phone, IMHO. If you don't like either, you don't have to use them.
Cons:
Weight - it does add weight to your phone. It's not extreme, but holding the phone for extended periods of time may prove annoying by some with this extra weight. I don't mind it at all, and I have a headset and use speakerphone anyhow.
User Adjustment Required - Out of the box, this case is NOT ready to use! You absolutely must gauge how well the metal clip engages the main body of the case. Every case I've received required me to slightly bend the clip inwards to provide a stronger hold. If the hold is too weak, brushing against the side of the case (by your arm when walking with the case attached to your waist side, or by anything you may brush against) can result in your phone falling out to the ground. So, adjust the clip right away, and ALWAYS, periodically check it, as repeated opening may loosen the hold over time. Also, when wearing this case attached to the side of your hip, attach it to your left side so the metal clip and catch of the case are facing behind you. This way, brushing against something while you're walking will not accidentally open your case allowing your phone to drop out.
Plastic Cover - this cover can scratch. I tried placing a screen protectors over it, but they would never stay. The oil from your face/hands/etc, along with the lack of a frame protecting the edges of a protector from friction are mostly to blame. However I've learned that with a little care, the plastic screen can survive everyday use quite nicely.
So, I highly recommend this case!!
10% off coupon code -> EIWQC1257830
"Simply insert the coupon code during our checkout process and instantly save 10% off the merchandise.
You can use the coupon up to 5 times. This code will expire after 60 days [from 10/7/09]."
There's more to know though so don't buy until you get my review..hopefully tomorrow.
Hey guys,
hope you can help me out by sharing your experience with me. I'm currently trying to find a good device holder for my Sony Ericsson Xperia X1. I'm planning to use it on my bike for sport cycling trips.
Do you have a list of recommendations for a good device holder? Which products do you use?
I'm interested on this thread too. How can I get the Xperia on my bike?
OtterBox 1900
I've made a test, in Portuguese, with a few more images, at PocketPT.net forum.
Hope it's allright to post the link, as it is in PT, and certainly not a contender to xda.
If not, Mods are wellcome to remove it.
Nice report, vmiguel: just how energetic can you get with your mountain biking and your Xperia on the handlebars? Is the xperia made to absorb such vibratin?
And does the protection create visibility problems with the reflection of the sun?
Well... it's all in the test, really... but not everybody reads Portuguese, eh?
OtterBox has a proper bike suport to attach this case, but I do not have it. Instead, I use the original hand/arm neoprene band around the handle bar. It stays there *almost* all the time. Only in really bad terrain it tends to rotate downwards. But never falled out of the bike.
Regarding vibrations, the case isolates the pda from them. The pda sits between a neoprene band that forces it to the rubber screen. The pda does not touch any hard part. So, no problem there.
The rubber screen works well, but surely creates a visual barrier, but nothing major. Can not eat the cake and keep it also, right? For touch operations, it's pretty good.
Maybe you can try google translation on the test, it will not be 100% right, but maybe enough.
Anyway, I'll try to answer here any specific questions about it.
Thanks for your help, will take a closer looks at Otterbox. It looks really heavy.. how much is the weight approximately?
0,32 kg
the bicycle mount i use for my experia
if you need something advanced this one is good too, tested it, xperia fits into it the case is waterresistant its from ortlieb if you need one you can contact me we own a bicycle store and sell both models i prefer the first one cause i never go biking when it rains and i'm able to use the touchscreen while this is not possible with the ortlieb case
I can back up how AWESOME the OtterBox has been for me, I've had a couple for my work when I was a bike courier.
As a bike courier I would go through hell and back, several times a day! Never ever ever had water troubles, or even shock damage! And I've been run over by cars, trucks, buses more often than I've had hot meals! No problem, get up and brush myself off and it is still working fine! Not even a crack in the case.
The case is very lightweight, adds nothing really to the weight... just bulk. I'd strongly recommend not getting the one linked to earlier.
Get the smallest you can, I've used this:
otterbox.com/pda-cases/1600-series/1600-gps-cases/ (can't post links as a new member, but you know what to do.... ctrl-c ctrl-l ctrl-v enter)
(although I was using a PDA about double the size of the Xperia X1, and I still had heaps of space. Good for keeping the spare battery then packing in the rest of the space with sponge cushioning to keep it safe from crashes)
I'd wear it on a medium length single loop over my shoulder and across my chest, then clip the case to it. Would just hang there out of the way until I decide to flick it up with my hand to look at it.