BT file transfer from/to HIMALAYA - MDA II, XDA II, 2060 Windows Mobile 6 Upgrading

Hi all
I am looking for a way to trnsfer files from and to my HIMALAYA .
I have tried MS BT Stack but didn't find the way to do so ' I also tries the other BT stack but it takes 8MB of memory so my HIMA is asking me to SR since no memory available to run the BT manager.
Can any one help me to find an easy way to do so .
I am using now c_shak wm6.1 ROM
Thanks in advance .

I am using a recently patched himalaya using c-shakar 6.1.1b16cs with 1.17 radio as suggested. It took me a while to figure out how to send btooth, all you do is keep stylus on file for a while and then choose beam , this not only for infra red but also btooth in this issue of mobile software .Simple?
Cheers...

Thanks for the reply
I tried to do so But the HIMA just stuck ( Will try that again later ) , What about sending file to the HIMA , I can send files to my Nokia but not to HIMA .
Do U have any solution for that , Thanks in advance.

help!
same query here!

Related

Qtek 9090 ROM upgrade and bluetooth license expired

I have a 9090 bought in Dubai. I am now getting a bluetooth expired message and the imate help desk told me that I must get a ROM upgrade from the Qtek suppliers. Problem is that they all give a country error. Is there a patch for the bluetooth expiry problem? Is there a ROM upgrade that is open for all Qtek 9090s? thanks Bill
You may just try the BT upgrade to 3900 (file on FTP server) or try to correct the Country error with GetDeviceData.exe also on the FTP site plus the instructions of the other thread about upgrading QTEK
Joao Caldeira
Sorry, but the 3900 does not seem to work (at least out of the box)
Just tried it and started to receive that message.
Joao Caldeira
Someone has posted the attached file and said that it can fix BT license expired error. I have not tried it myself, so use it on your own risk.
To use it - extract archive to your PocketPC and run EXE file.
Thanks.
I'll try it as soon as I have my cradle.
Joao Caldeira
Hi.
No more License expired message, but I'm not being able to pair with my BT Headset HBH-660.
Maybe I'm doing somethiing wrong... I'll check it out...
Thanks,
Joao Caldeira
OK.
Paired the device. When trying to "connect" the QTEK showed failes.
Turn BT off and on and everything is working.
THANKS
Joao Caldeira
BT_key
I copied the two extracted files over to myQtek 9090 and opened the exe file. A list of BT addresses came up and a write key icon. When I try to select a BT address and write it, I get the following message: ResetMFG(). DeviceIoControl(). FL_IOCTL_BDK_OPERATION fail!
Am I doing something wrong - I copied the files into my documents on the 9090 and ran the exe file through file explorer on the Qtek.
Thanks,
Bill
BT_Key
Thanks. This solved my problem.
I was getting this message everytime I turned bluetooth on:
Sorry! Bluetooth can no longer be used because the license has expired.
BDA: 00:00:00:00:00:00
Key:
E3E534E19B3E8214C543A
73C0A8B9A9074DD3B175
3515CD8
For some reason after a System ROM upgrade, my bluetooth device showed what it looks like a mac address as 00:00:00:00:00:00. This tool fixed the problem.
For anyone that is running into the Bluetooth License problem please try this.
DJ
Yes it does.Seems after upgrade BT have no mac adress so this "thingie" writes it down in some register.Any way done job for me.
Damn.. same thing happened to me today (
Reset time\soft reset not work
the fix when i launch i get "ResetMFG(). DeviceIoControl(). FL_IOCTL_BDK_OPERATION fail! " too..
Is there another way to set up a mac address? :O
Chooo
Upgraded to 3900... still 00:00... BDA and that fix program doesn't work!
Chooo
well in WM2003 rom they use old versions of the Bt stack thats why it shows license error
Ok.. but.. it's normal as answer? ^_^;;;
No mistaken.. thx for let me know this.. but danguard is already dead here in italy.. how the hell can i fix? I dont want to install a wm5, there isn't a way in registry to rewrite BT?
Chooo
The BT update worked for me.
FYI
I have tested 3900 and now 3500... nothing..
i want to try other stack,like this : OEM_WWE_160_600.sa.CAB
but.. how can i delete used file "audioGW.dll"?
Chooo
mamaich said:
Someone has posted the attached file and said that it can fix BT license expired error. I have not tried it myself, so use it on your own risk.
To use it - extract archive to your PocketPC and run EXE file.
Click to expand...
Click to collapse
I just want to give a short feedback.
I was experiencing the license-problem since a ROM-Update failed and my extended ROM was deleted. After hours of resaerch I finally found your post and I have to thank you very much! With this small file now everithing seems to work as it should again!
I can only recommend it to everyone with the same problem!
Greetz from Germany!

When I try to Format FL_IOCTL_FORMAT_PHYSICAL_DRIVE failed

I have a Qtek9090 with ROM 1.40, radio 1.13
When I try to format my ROM to 128M wit the DOC_Repart tool I got the message FL_IOCTL_FORMAT_PHYSICAL_DRIVE failed, even I can see create and delete into the ExtendRom.
I have tried to install some ship ROM but it doesn't solve my issue.
A friend who get the same Qtek as me doesn't had any trouble when upgrading to WM5. I have sent my Qtek to be repaired a few month ago, could it be modified by Qtek ? Does somebody else get the same issue than me ?
upz
i got the same problem too !!!
stuck with the issue
and using 2005 with less mem
Hi,
got the same error. *duh*
The phone was also sent to qtek for reparation.
Got it working now.
I´ve made a hardreset to install the normal ext_rom.
After that i installed xda-developers_unlocker.cab from wm5_pack_v3 and then resco fileexplorer.
Cause of the german naming of programme (not programs) i couldn´t use the links in startmenu to execute the unlocker.
I used the execute-function in resco fileexplorer to execute the following commands:
\programme\extendedromunlocker\unlockextrom -unlock -xda3 and
\programme\extendedromunlocker\unlockextrom -unhide
Then: soft-reset.
After that i copied the Repart_doc.exe from wm5_pack_v3.
This time it worked without any errors.
this is veri interesting news, i will try again in a min
ehheheh
the using resco to run is one different thing i did not do
so sad, give me hope
hehehe
i just tried this n it did not work also
triplehelix said:
Got it working now.
I´ve made a hardreset to install the normal ext_rom.
After that i installed xda-developers_unlocker.cab from wm5_pack_v3 and then resco fileexplorer.
Cause of the german naming of programme (not programs) i couldn´t use the links in startmenu to execute the unlocker.
I used the execute-function in resco fileexplorer to execute the following commands:
\programme\extendedromunlocker\unlockextrom -unlock -xda3 and
\programme\extendedromunlocker\unlockextrom -unhide
Then: soft-reset.
After that i copied the Repart_doc.exe from wm5_pack_v3.
This time it worked without any errors.
Click to expand...
Click to collapse
thats it!! Im trying to format the extrom of my T-Mobile MDAIII for days now, but this is the solution! u need the tool mentioned here, the extendedromunlocker in EXACTLY this version with the "-xda3" switch ! Any other version of the tool will not work. Dont ask me why, but ive tried them all and ONLY THIS works! a huge thanks triplehelix.
i will attach the .cab for anyone who wasted hours to solve this damn problem!
greets
//edit: sorry for pushing this really old thread, but anyway, i think this will help anyone wo was as desperate as me.
dunno if this helps but, back in my Hima days, the "FL_IOCTL_FORMAT_PHYSICAL_DRIVE" error is due to the extended ROM not unlock & unhide.
you have to run the unlock & unhide procedure to avoid the FL_IOCTL_FORMAT_PHYSICAL_DRIVE error.
really thanks, i have the same problem and with other unlockers can't work, Repart_doc.exe anytime give me this error, next time i format my pda want try this to format my extrom
Still an't working for my XdaIIs....
Can you attach the 'Repart_doc.exe' file...
I can't get my device formated....
hwpeter said:
Can you attach the 'Repart_doc.exe' file...
I can't get my device formated....
Click to expand...
Click to collapse
its located here: ftp://xda:[email protected]/BlueAngel/BA_WM5/Tools/Repart_DOC.exe
have you tried to unhide and then unlock with the "-xda3" switch ?
i use SOTI PocketController to remote control my device. it has a "command line" interface included. here you can type dos style commands. execute the unlocker, inclusive -unlock and -xda3 switch.
for example: \programme\extendedromunlocker\unlockextrom.exe -unlock -xda3
this is the most important line.
this time for me work very well, but have reflashed to italian W2K3 Swisscom 1.40, on this rom Program Files are named Programmi like in any other italian rom, just copied (with resco explorer) the entire folder from "programmi" to a new folder created by myself under device root named "program files" and without any change to original link in windows/start menu/extrom tools are not needed
for me work on first try with this method, and now have missing megabytes of valuable space
all files needed are picked from this thread (except for rom and resco explorer)
still not working
I've tried all the method above... but still not working... I've tried a lot of roms but still... any other sugestions?
Hi guys
I tried everything but I just can't get extended rom to be formated.
Maybe someone as a better idea to solve the problem
Greetings Kapiza

TomTom for my Wizard?

Up till last week I had a T-Mobile MDA Compact and I'd got Tomtom (bakonl) running. Now I have a Wizard (T-Mobile from The Netherlands) and I can't install the Tomtom. Appears that WM2005 not compatible with Tomtom Version 5. Anyone got a plan to get arround this? :?:
To install TTN5 on WM5 you have to copy the cab files directly to pda and launch it with the pocket explorer (or resco explorer).
a bit more info to install tomtom and get it working
http://forum.xda-developers.com/viewtopic.php?t=29606
Thanks for the responses guys. I've given it a go and moved the cab files from the CD to my SD card and installed the GPS cab first. Then soft booted the Vario and then attempted to install the TTN cab.
All per the post :-
http://forum.xda-developers.com/viewtopic.php?t=29277&highlight=ttn
However... Still won't install correctly...
Am I doing something wrong?
Any more advice gladly received.
Thanks,
you need te get the tomtom 5.1 files then it works fine. I've got it working on my bleu angel with WM5, and today i installed in on my brother's vario and it worked just fine.
Thanks,
Can I ask... Where did you get the 5.1 files from?
You can download TTN5.1 from the following link
http://www.tomtom.com/updates/ppcupd510.exe
otherwise just use a torrent search engine, you should find it in no time
dalamario said:
You can download TTN5.1 from the following link
http://www.tomtom.com/updates/ppcupd510.exe
Click to expand...
Click to collapse
You need the zip file not the exe. AS4 messes up the installation.
http://www.tomtom.com/updates/ppcupd510.zip
Dear All,
I found this update this week..
http://users.skynet.be/wallpaper/TOMTOM5.1.zip (for more info see http://tomtom3.web-log.nl/log/856067 around - Mondeo :: 20 september 2005 16:18 -).
Note : Download, unzipp... connect your PDA/Phone via Sync cabel/station, setup.exe run. (I have installed it over my (bakonl) 5.0 version.... !!!).
Note 2 : Can ONLY be used if you have a BeNeLux version of bakonl TT5 and only with the BeNeLux map (normal or plus).......
Success with the upgrade.
TomTom with WM6.1 on HTC wizard
Good Morning,
can anybody support me in trying to setup a navigation functionality on my HTC wizard, that runs WindowsMobile 6.1 (those TNT edition)?
Unfortunately i can't find up to date information about which GPS-hardware to use. Is BlooTooth the only reasonable solution for the wizard?
I also plan to feed the tachymeter signal from my bicycle somehow. Has anybody read of approaches to this and can cite or link?
Third thing I'm in search of is an alternative camera software. The "Camera for Pocket PC Version 3.00" does not support geoTagging and not even writing in the Tags for Titling, commenting etc.
Many thanks for your valuable hints in advance.
blausand

help on: softick's card export II ver 3....

what do you call the bar of alphabet on the right side which appears when your scroll thorugh a big list.....???
сan any one point out the links to cabs to install it???
any recommendation for the cleanest rom for HTC TYTN II ??
ps: recently after flashing to new rom....notice that it's not included.....
The app is called HTC Random Access. Most of the cooked ROMS have it, I don't think any of the HTC OEM ROMS do.
My advised ROMS for you:
Stock: http://forum.xda-developers.com/showthread.php?t=439408
Cooked: http://forum.xda-developers.com/showthread.php?t=397121
-Mc
how to render a card reader????
McHale said:
The app is called HTC Random Access. Most of the cooked ROMS have it, I don't think any of the HTC OEM ROMS do.
My advised ROMS for you:
Stock: http://forum.xda-developers.com/showthread.php?t=439408
Cooked: http://forum.xda-developers.com/showthread.php?t=397121
-Mc
Click to expand...
Click to collapse
thanks for the fast reply!!
i'm using hyperdragon lite rom now....
how ever somehow softick card export is not working....
my pc kept on installing the driver for it for the first connection....
after some time kaiser hang......
and on second connection the pc show that it is connected.....but i can't explore the sd card cos there's no link from my computer .....
normally i would search for autorun.....but after rom update to hyperdragon it stopped working.....
still trying the search to look for fix...........
anyone??????
ps : w5storage not working tooo....
only hope at the moment....pocket controller through the file browser option???
this is really a pain!!! cos i don't have a card reader......
active sync could do some transfer but it's slow and limitation with the file size.......
edit: some one pointed out that in order to use card export, a usb2pc.exe file need to be in the /windows folder.....
anyone can kindly verify this????
or please kindaly upload a copy of that file so that i can try it my self......
(no rapidshare or megaupload servers.....they don't work for me)

i can't install programs in ramdisk or storage card post upgrading

hi Sir
i upgraded my (i-mate pocket pc HP10b ) from wm2003se to many roms i got from this great forum. I tried almost all Ather and C_Shekhar roms,although sun dream wm6.5 .
found most of them great stable and fast but the big problem which may make me mad that when i install any program ( .exe from pc or .cab from sd) the windows ask me were i install it, but any where i choose the program install only in the main memory. when i install the original rom (PPC_RUU172126WWE_imate) the proplem is solved and all app installed easily in sd card. I am using skyscape medical . and medical wizards softwere.
i searched this forum many times about this but i failed.
So,, please any one can help me( i don't want to go back to wm2003se)
Have you tried to install another Program (maybe Resco Explorer) to Storage Card? Does that work?

Categories

Resources