Hello!
I need a little help here..
So, after I install a program on my Kaiser, I cannot see it in Start>>Settings>>System>>Remove Programs..
(now, the last program is ultimate launch, but last time it wasnt installed on my pda)
It is the second time i noticed this. Last time i made a Hard Reset, that helped.
but now, I dont want to do a HR
please, help me!
thanks,
pulyka
ps: the only way how i can uninstall the program, when i run the cab file again, and it removes it.. (and cancel the operation)
Related
Hi, I am new here and I need some help, I flashed my Ext ROM and added some applications on it and every thing works alright. But I am unable to get the XDA 2i automatic soft reset after installing an Hard reset, and since some applications needs clicking Ok button after Installation, i am looking for something to do that job. I remember reading somewhere in these forums and i spent a long time searching back but could not find where it is. I would be gald if somebody could help me.
Cheers.
peavey said:
Hi, I am new here and I need some help, I flashed my Ext ROM and added some applications on it and every thing works alright. But I am unable to get the XDA 2i automatic soft reset after installing an Hard reset, and since some applications needs clicking Ok button after Installation, i am looking for something to do that job. I remember reading somewhere in these forums and i spent a long time searching back but could not find where it is. I would be gald if somebody could help me.
Cheers.
Click to expand...
Click to collapse
hi there,
i'm also quite a newbie too, and i recently created a modified rom using Bal666's cool utility. i think i understand your problem with being unable to use the screen after a hard reset.
The problem is that the config.txt file runs a program called "tpdisable.exe" before installing the .cab files, to prevent users interfering with the install process. Simply delete this entry from config.txt in your extended rom image and burn again!
hope this helps!
thanx i will try and post u how it goes
thanx i will try and post u how it goes
PC crashed while updating ROM
does this make any difference - i've re-booted my laptop and am currently sat on the checking device info screen, how long does it take to check as its been a good 30 mins now..
any help appreciated
Put your device into bootloader mode before you try updating it, it might work a little better.
Remove the entries for tpenable and tpdisable from the config file and the rom itself.
If you want to stop those "This program is designed for...." screens, download WinCE CAB Manager and change the min and max OS versions to 4.21 and 5 respectively on the cabs you are putting into your extended rom.
Good luck.
HI pug thanks for reply, I have a question here...
When installing programs from ROM, some programs may need pressing "OK" to continue. Is there anyway this can be done automatically or can anything be changed in the cab file so we can stop that screen from comming up????
Any help apperciated.
Thanx in advance
Sorry PUG i think u already answered my question SORRY
changing the min and max os ver. with wince cab manager didn't work.probably b'coz the os detect the source build in version, not the cab version.
Hi to all,
some days ago I've posted searching a solution to a problem that many people have, the quick gps' failure to update.
I've tried all tips and tricks suggested here and in other forums because I don't want to do a hard reset, without lucky.
I want to try a last thing. IS there anyone thar can post as attachment his quickgps.exe file (obviously someone that has the quickgps going well ) ?
I want to try to overwrite my program file and see if something changes.
I've tried to delete it with TC but I'm not able to do it. So i'll try to overwrite it.
I have an italian rom (1.37) so quickgps coming from italian friends with italian rom are especially welcome
Thanks to all for the helps that can give me.
Dunno if you've tried this already, but when mine stops working I've found that if I run Internet Explorer and go to www.htc.com wait for it to load and then try again it will then load the quickGPS data.
Works everytime for me.
You're magic !!!!!
I had also read about open internet explorer first but it gave me error anyway.
But opening www.htc.com and then using quickgps it GOES !!!!
I don't know where you live but if it happens to you to be in Rome you have a beer payed
I had the same problem and it worked for me too. I couldn't use the youtube app or quick gps
now they both work
Thanks !!
hi, i ve try several time to install version of windows live for mobileon my diamond, even the link in xda developper forum, the software is welle install. At the end of the installation, every time it says: synchronization failed, i ve try 4 version, and it is the same, my username and password are good, because i ve manage to connect via palringo software...
could you please help me?
i ve got a sfr diamond from france version wm6.1
thank u all
Hi Nightcrane,
sorry to hear that your WLM is not working...
I've had some probs myself as well with it, but I found a version which should work...
1st of all...remove all what's left of your WLM on your mobile...
after that, I have added 2 apps for you you have to install:
-windows live noIm 0409
softreset
-Windows Live 10.6.39.1300
softreset
LINK FOR 2nd app: http://www.4shared.com/file/75788789/558cd374/Windows_Live_Messenger_106391300.html
EDIT: For some reason I can't upload the other file
After that you should be able to connect to Windows Live....
give it a try mate
good luck
regards
Jeroen
very sorry, maybe i am dumb, but i do it and it does not work, but i think i am not doing the right thing, when i install the first soft, at the end of the installation it doesnt ask me to reset my htc. the second one yes, so maybe i take a wrong way... when you say soft reset, i switch off my phone? and when i install the first file, and then the second one, how can i know if the first programme is removed?because normally, it has to ask me if i want to remove the old version...
sorry for my bad english, and my knowledgeon that type of problems
regards...
nightcrane said:
very sorry, maybe i am dumb, but i do it and it does not work, but i think i am not doing the right thing, when i install the first soft, at the end of the installation it doesnt ask me to reset my htc. the second one yes, so maybe i take a wrong way... when you say soft reset, i switch off my phone? and when i install the first file, and then the second one, how can i know if the first programme is removed?because normally, it has to ask me if i want to remove the old version...
sorry for my bad english, and my knowledgeon that type of problems
regards...
Click to expand...
Click to collapse
Hi mate,
I don't think you're dumb
No, I think i know why it doesn't work for you....you need to install those apps in the way I told you, INCLUDING a soft reset between the 2 programs...and a soft reset can also be done by pressing the powerbutton to turn the device off...wait about 10 seconds and turn it back on...
afterwards you install the 2nd one WITHOUT uninstalling the 1st one...because that one will be overwritten with the new one....
It should work...that's the way it works by me...I've done the same thing...
Good luck fella
Windows Live Mobile
I have downloaded the Windows Live cab from http://www.microsoft.com/windowsmobile/mobile/wl/languages-en-us.mspx , but it doesn't contain the Messenger sw.
Where can I find it? In a oldest ROM i have it installed......
bye
TheJackall
I have tried many methods posted on this website, i am currently using a romeos rom 6.1 1.971.....it is getting very frustrating now, all i am trying to use this program for is Gremote......any suggestions would be greatly appreciated and i tried to install Microsoft NET CF 3.5 on touch pro it tells me i need more storage space and a support number 3....ANYONE PLEASE HELP MEE
I have renamed mscoree.dll to various things including mscoree.backup.dll and mscoree.dll.txt same issues, still cannot install this program, is there way around it so i can still install and work the gremote?
I've had this problem with romeos also and i searched through whole xda and i found this:
1. You should shut down manila.
2. Then soft reset.
3. Uninstall your old net. 3.5 if possible (program/remove under system settings)
4. Start a regeditor and delete in the registry this map: HKLM/Software/microsoft/.NETCompactFramework
5. Soft reset again and try installing net 3.5 again.
If it doesn't work repeat al this again and sometimes you have to try installing it twice times, and soft reset some more again and then remove again the registry stuff. and try install it again and again. It worked with me.
Hope it helps
sorry im a newbei i dont know how to shut down manila, how would i be able to do that, and where can i find a regeditor...thanks alot
Hey i got it!!!!!!!!!!!! THANKS A BUNCH
well i got it to install that was about it i couldnt really function it or where to fin dit on my touch pro, i then installed g remote that wouldnt work ...oh well i give up spent way too much time on this peice of s*&*^
I installed the .net on my touch pro and the only way you can tell if it is installed is if you go to start-settings-system-remove programs. There is a list of everything you have installed. From there you should be able to run programs that need the compact framework in order to work.
Hi folks.
1st sorry for my english, my school-english was long time ago
the Title of this threat says what's my question:
I've got a german ROM with it's kitchen. I added some different SDAutorun-packages of this Board, but no one works 100%.
The best result i get was my 1st attempt; the only problem was, that i must start the "sdautorun.exe" manually. The last attempt was also not bad, but after a few seconds in the UC-Mode the device makes a softreset, so only a part of the CAB-Files will get installed.
I think to solve my problem is not so difficult, but i'm not able to do it without help.
Many thanks in advance.
Ralfi.