OK, my 8525 used to do this very well. I just got a tilt and installed several roms and they all did the same thing (duty, ATT org., and DCS) when I setup an email for a yahoo account and try to sync it says it cannot connect under these settings. But they are the default settings for att. I also checked with att and my settings are all correct. I was using the 1.58 radio now I'm starting to use 1.64 to see if that works any better. I don't know if this is a radio issue or whatever but I really need help att support isn't doing anything so I'm turning to you guys. (btw I've reset everything many many times getting the same error too)
xcom923 said:
OK, my 8525 used to do this very well. I just got a tilt and installed several roms and they all did the same thing (duty, ATT org., and DCS) when I setup an email for a yahoo account and try to sync it says it cannot connect under these settings. But they are the default settings for att. I also checked with att and my settings are all correct. I was using the 1.58 radio now I'm starting to use 1.64 to see if that works any better. I don't know if this is a radio issue or whatever but I really need help att support isn't doing anything so I'm turning to you guys. (btw I've reset everything many many times getting the same error too)
Click to expand...
Click to collapse
Did you not learn anything from your 8525....?
You need to provide more info if you want help.
Start by creating a signature summarizing your device's set up.
Default is not always default....keep this in mind!
I don't know what data plan you have but I'll start with this:
Start > Setting > Connection > Connection > Advanced > Select Networks > In the Drop down box...you probably have Media Net, Try ATT Wap or vice versa.
This all I can do for you because you failed to provide more info. Based on the radios you've tried, I'm assuming you're on WM 6.1. Also, you need to address this issue in the thread of the Rom you're using.
You've said also that this issue repeats on several Roms.....What are you using to configure your Network settings?
Either Network Config or your cab file is not working properly you. You may have to manually input your settings. They are located around here somewhere or google it.
dwny said:
Did you not learn anything from your 8525....?
You need to provide more info if you want help.
Start by creating a signature summarizing your device's set up.
Default is not always default....keep this in mind!
I don't know what data plan you have but I'll start with this:
Start > Setting > Connection > Connection > Advanced > Select Networks > In the Drop down box...you probably have Media Net, Try ATT Wap or vice versa.
This all I can do for you because you failed to provide more info. Based on the radios you've tried, I'm assuming you're on WM 6.1. Also, you need to address this issue in the thread of the Rom you're using.
You've said also that this issue repeats on several Roms.....What are you using to configure your Network settings?
Either Network Config or your cab file is not working properly you. You may have to manually input your settings. They are located around here somewhere or google it.
Click to expand...
Click to collapse
I'm sorry I thought I was providing enough info. I used the network config ROM that was built in to most of the windows 6.1 ROMs but I also used the "default" settings from att. (I ment defauld because that is what att shipps)
But if you want more info here is my network settings
When I first hit "connection settings" I have in bold "MY ISP" and "My Work Network"
if you go to manage "MY ISP" it has the config for att's isp. here are the settings:
Access Point Name: isp.cingular
UserName: [email protected]
Password: CINGULAR1
(also set to use server IP)
_________________________________________________________________
Under the "Advance" tab I have 3 choices for each drop-down menu they are "My ISP" (which is selected for the top "programs automatically connect to the internet"), "MEdia Net", and "My Work Network" (which is selected for "programs that automatically connect to a private network)
the "MEdia Net" settings are as follows (and I have switched between using ISP and MEdia net in the drop down menu for internet and get the same problem)
Access Point Name:wap.cingular
User Name: [email protected]
Password: CINGULAR1
(also set to use server IP)
_________________________________________________________________
I hope that is enough info like I said earlier my roms is currently DCS v1.7 and I'm running radio 1.64 as a side not it doesn't seem like my GPS is working correctly since it hasn't found a lock in 5min. But I think I've found the thread to help me with that. Again I'm having trouble with only syncing my e-mail althouth internet works just fine
I'm in your boat too. I have the same settings but under media net. I read one place to use the username and password you have but ATT says to leave blank and then run some cab file for proxy info. (I didn't do that) So far it has the exact settings you have, my PIE works and everything. Just can't send receive mail.
At this point though, mine just says connecting, and then asks me to verify my username and password, then I get ..
"Messages cannot be downloaded to your movile device. Make sure you are connected and that your email account settings are correct. Then, try to download messages again. "
I've tried 2 different email addresses..
ChumleyEX said:
I'm in your boat too. I have the same settings but under media net. I read one place to use the username and password you have but ATT says to leave blank and then run some cab file for proxy info. (I didn't do that) So far it has the exact settings you have, my PIE works and everything. Just can't send receive mail.
At this point though, mine just says connecting, and then asks me to verify my username and password, then I get ..
"Messages cannot be downloaded to your movile device. Make sure you are connected and that your email account settings are correct. Then, try to download messages again. "
I've tried 2 different email addresses..
Click to expand...
Click to collapse
that's actually the first time I heard something about proxy settings. Where is that cab just in case (I'm willing to try anything)
I didn't use that cab but I did try Cingular PDA MediaNet MMS Settingsv2.cab
it should be attached.
EDIT
I know what solved my problem, paying a past due bill.
Problem Solved
OK, one piece of info that I didn't realize was important was that I am on the unlimited MEdia Net plan (which uses WAP.CINGULAR.COM) and the PDA plan, which is way more expensive uses ISP.CINGULAR.COM apparently I needed to change any network that was WAP and change it to ISP to get my pda to use things that I guess are usually covered in the PDA Data plan.
Thanks for your help everyone and I hope this can be used for someone else as well. long story short.....
media net=wap.cingular
pda plan=isp.cingular
Related
I have been searching thru the forum and i can't find any specific information about it
i use windows live messenger, email , and browse with Opera...I do use live search and google map too and i am with the 19.99 total internet plan now..
Just want to see if it is possible to save the 13 bucks coz i don't need hotspot at all....
I have seen posts that about changing proxy and get the internet with PIE to work but it doesn't mention about other programs like tomtom google map live search and i don't want to change it to the T-zones without confirming this.
Could anyone help please?
i'm in the same boat as you, the 5.99 works on my dash, so i'm expecting it to work on the tilt, but i just cant get it to work...now when i open up PIE, it goes from connnecting, to loading to opening, and just stays there and then gives me error #502... so if you figure it out, def let me know, thanks
omar
Same here, I have posted a thread about it already but no replies, Here. Do let me know it thr is any, n i'll do the same.
I can confirm t-zone plan works fine with google map, push mail to exchange servers, browsing using IE, and regular smtp/pop email. The weather update progam on the today screen does not work. On the other hand, SBSH Pocket Weather does work (I let it update throughout the day). NTP time server service also does not work (using CityTime).
1. add new modem connection -- cellular line (gprs, 3g);
2. access point name -- wap.voicestream.com
3. leave password blank
4. proxy settings check "this network connects to internet";
5. check "use proxy server"
6. proxy server: 216.155.165.50
7. advanced: change http port from 80 to 8080
Under network management, set Internet Connection to the account just created above. Leave private network as "My Work Network".
Soft-reset.
If you have trouble with POP accounts, edit each POP account and change connection away from "My ISP" to the t-mobile account.
Cheers
Okay i have tested this setting for T zones and i am trying to add a few details on it.
1st. Windows Live and Windows Live Messenger does not work =/ I guess it is because it doesn't support proxy connection. I am wondering if anyone can somehow mod it or change the proxy settings of these two programs with registry or other means so i can actually use it?
2nd. PIE works right away with the setting, but Opera won't. Later i add the proxy server in the Opera setting then it works like a miracle too=)
3rd. Some other IM site such as communicationtube.net does support the login of msn using T zones...Kind of a substitute even tho the stock messenger works much better.
4th. for 13 bucks/month the only different is probably only on Windows Live and Windows Live messenger....or if someone can actually provide a mod version of these two programs or a tweak that changes their settings. T zones works perfect for kaiser...
I can confirm that GMM works with the method listed in the link below with the $5.99 T-Mobile Web plan and WM5. But "My Location" does not, may be my phone (Cingular 3125) http://www.ehow.com/how_2245457_tmobile-shadow-any-windows-mobile.html
Did anyone successfully get T-MobileWeb to work on the Tilt to get internet access? I am able to send/receive email but cannot get PIE to connect tot he internet. I've setup the usual T-Mo proxy setting but is there another proxy in PIE somewhere? Is it an issue with PIE connecting through a WAP port?
Thanks.
__________________
I think therefore I am.... confused!!!
you need to search forums for tilt tmobile, thats what i had to do..how are your MMS working out... i cant get mine to work after i changed my proxy to get the $5.99 hack... i am thinking i might have to get the data plan.. let me know if you get it working...
these are the settings i am using;
Under Modem,Edit, needs to be wap.voicestream.com
under Proxy the setting needs to be, see below;
This network connects to internet, network uses a proxy server to connect, box need to be checked.. 216.155.165.50, then under advance
216.155.165.50 port:8080
216.155.165.50 port:1901
216.155.165.50 port:1901 or 03 worked for me
sockets, need to be blank
guys, i was able to get both working, however, not on the stock at&t tilt rom. first to get the mms working, i just went to settings-connections-connection setup, and let it setup ur settings for tmobile usa. this will not allow your mms to work. now go to the connections and modify the settings for the 5.99 plan (i posted the exact settings a while back, search for it).. all u pretty much gotta do is add the proxy. good luck
omar
ps..if ur using the tilt rom, i never got the mms working, and wasnt able to access the internet on the 5.99 plan. on the 19.99 plan worked fine tho
omaralt said:
guys, i was able to get both working, however, not on the stock at&t tilt rom. first to get the mms working, i just went to settings-connections-connection setup, and let it setup ur settings for tmobile usa. this will not allow your mms to work. now go to the connections and modify the settings for the 5.99 plan (i posted the exact settings a while back, search for it).. all u pretty much gotta do is add the proxy. good luck
omar
ps..if ur using the tilt rom, i never got the mms working, and wasnt able to access the internet on the 5.99 plan. on the 19.99 plan worked fine tho
Click to expand...
Click to collapse
Here's the setting:
5.99
start
settings
connections
connections
under proxy settings check: this network connects to the internet
check this network uses a proxy server to connect to the internet
proxy server should be :216.155.165.50
click advanced
http: 216.155.165.50:8080
wap: 216.155.165.50:9201
secure wap: 216.155.165.50:9201
socks (blank)
under modem, your access point name should be : wap.voicestream.com
name and password blank.
under advanced check use server assigned ip address
use software compression
use ip header compression.
T-Mobile Total Internet
The only differences is instead of wap.voicestream.com, its:
internet2.voicestream.com or internet3.voicestream.com
And instead of ports 9201 its 9203.
i did try those settings...(that is what they are set to now) my internet has no problems, but my MMS does not... so i cant understand the prob!
I've tried all the settings provided by we3zy but still can't get it to work. In PIE, it kept on saying "opening..." and then came back with the following error:
Error 502 - Bad Request
The server could not resolve your request for url: /
Any thoughts?
- Thanks.
OK, got it to work with accessing internet and email by adding a modem setting. However, I have to switch the two connections depending on which function I need.
Under Setting, Connections, Advanced button, Select Networks...I need to do the following:
In the Network Management screen I have a few choices but only the two settings in the top choice (Programs that automatically connect to the internet should connect using: ) need switching. When I click on to select the choices, I have setup one for accessing the internet and another to get email.
Is this normal or am I the only one that have this issue? Its kind of annoying to keep on switching the setting for the functions. Any way to combine the two connections or have the device auto choose and connect automatically?
we3zy said:
Here's the setting:
5.99
start
settings
connections
connections
under proxy settings check: this network connects to the internet
check this network uses a proxy server to connect to the internet
proxy server should be :216.155.165.50
click advanced
http: 216.155.165.50:8080
wap: 216.155.165.50:9201
secure wap: 216.155.165.50:9201
socks (blank)
under modem, your access point name should be : wap.voicestream.com
name and password blank.
under advanced check use server assigned ip address
use software compression
use ip header compression.
T-Mobile Total Internet
The only differences is instead of wap.voicestream.com, its:
internet2.voicestream.com or internet3.voicestream.com
And instead of ports 9201 its 9203.
Click to expand...
Click to collapse
I used the 5.99 setting and this is exactly what my explorer's (PIE, Opera and email also says cant connect using this connection say.
"Error: Requested content 'www.google.com/m' cannot be accessed. You do not have access to the site. "
moddin said:
I used the 5.99 setting and this is exactly what my explorer's (PIE, Opera and email also says cant connect using this connection say.
"Error: Requested content 'www.google.com/m' cannot be accessed. You do not have access to the site. "
Click to expand...
Click to collapse
I really can't explain why your getting that problem. But visit www.yahoo.com and then visit google.com again. I had that problem on the iphone, don't know why.
Make sure you've checked:
use software compression
use ip header compression.
and all ports are 9201
the settings above worked to get ny internet browser up i am currently on google with the original at&t rom now im gonna check my emails and weather plug ins
we3zy said:
I really can't explain why your getting that problem. But visit www.yahoo.com and then visit google.com again. I had that problem on the iphone, don't know why.
Make sure you've checked:
use software compression
use ip header compression.
and all ports are 9201
Click to expand...
Click to collapse
They are all checked. I changed all ports to 9201 even the http and now when i open pie it says
"You do not have access rights to this site
URL=www.google.com/
Status=20(hex)"
Also it adds "wsp://" in front of any link i type in the browser. Maybe you didnt mean change the http port to 9201 but i gave it a shot. are you guys and XXwindowsXX using the 5.99 deal? and it works?
email routing issue + cannot download TM's w/ pics
Hi All ~~
It sounds like I may have found the right msg board! I am a T-Mobile customer using an unlocked AT&T phone with the original ROM (minus the bloatware). I currently have three msging accounts on the Tilt: text msging, a hotmail account and a work email account (which I check via Outlook on my PC). I am having two annoying problems:
(1) I keep getting TMs saying that I have received an email on my work account; however I cannot (a) get the text msg notifications to turn off, nor (b) get the emails to actually pull down into the account. So: I know I have a work email (even who from), but cannot read it. Any thoughts on how to resolve either or both of these issues?
(2) I cannot receive or send pic text msgs. Really annoying; I am curious to see how other T-Mobile Tilt users have their settings arranged for this.
Thank you in advance for any assistance you can provide ~~ Kim
TYTN/Hermes settings?
These settings in post four, would they be the same for the HTC TYTN/Hermes as well? After going into cnections, I notice that there isn't anything called connection settings. Just add new modem conection, proxy settings etc. I'd really like to be able to get this T-Zones up and running on my Hermes as well.
Thanks,
Cristobal
Cristobalm said:
These settings in post four, would they be the same for the HTC TYTN/Hermes as well? After going into cnections, I notice that there isn't anything called connection settings. Just add new modem conection, proxy settings etc. I'd really like to be able to get this T-Zones up and running on my Hermes as well.
Thanks,
Cristobal
Click to expand...
Click to collapse
Yes, it should be. You'll need to add a new modem connection and edit the proxy settings. PM me if you can't get it to work and I'll try to help you.
Tilt Solution To Force Http Instead Of Wsp On Tmobile
Our good friends at ATT have two cab files in the \windows folder which install and remove a hidden proxy. By default, it funnels through the proxy.
BAD ATT!
If you are using T-mobile's 5.99 gprs plan and the HIDDEN proxy is enabled, all traffic will be routed through the hidden proxy and you will be forced to WSP:// pages. This will effectively lock you out of many of the sites that do not support the WSP protocol. Other carriers (Orange?) may be doing this too to drive WSP traffic.
To correct the problem, go to the windows folder and
1. run the restoreHiddenProxy4CWS_0522.cab
2. and then run the removeHiddenProxy4CWS_0522.cab file
3. Close your data connection and restart it. If you don't know how, just press the reset button.
After this is complete install the standard T-mobile GPRS settings and you should be in good shape. If you need a cab for t-mobile, search the board for the most current one or PM me. I keep one handy too.
liquidsilver said:
Our good friends at ATT have two cab files in the \windows folder which install and remove a hidden proxy. By default, it funnels through the proxy.
BAD ATT!
If you are using T-mobile's 5.99 gprs plan and the HIDDEN proxy is enabled, all traffic will be routed through the hidden proxy and you will be forced to WSP:// pages. This will effectively lock you out of many of the sites that do not support the WSP protocol. Other carriers (Orange?) may be doing this too to drive WSP traffic.
To correct the problem, go to the windows folder and
1. run the restoreHiddenProxy4CWS_0522.cab
2. and then run the removeHiddenProxy4CWS_0522.cab file
3. Close your data connection and restart it. If you don't know how, just press the reset button.
After this is complete install the standard T-mobile GPRS settings and you should be in good shape. If you need a cab for t-mobile, search the board for the most current one or PM me. I keep one handy too.
Click to expand...
Click to collapse
So after doing that, will I be able to browse regular HTML pages (without going through proxies) using the 5.99 plan ?
i have a ty tn II and t-mobile is my carrier and i have the 19.99 internet plan,so i would like to know what are the correct settings for the MMS cause i cant sent picture messages nor recieve them..please help me thanks
tm1125 said:
i have a ty tn II and t-mobile is my carrier and i have the 19.99 internet plan,so i would like to know what are the correct settings for the MMS cause i cant sent picture messages nor recieve them..please help me thanks
Click to expand...
Click to collapse
try this:
server name: call it whatever you want
Gateway: 216.155.165.50
Port: 8080
Server address: http://216.155.174.84/servlets/mms
Connect via: whatever you called the server name
Sending limit: 300k
WAP version: WAP 2.0
make sure you set this MMS server as default
The 5.99 plan requires a proxy. No exceptions that I'm aware of. The good news is that I've not found a page that I cannot browse. The speed isn't stellar, but quite acceptable. Additionally, since the power requirements for GPRS are low, I check email every 10 minutes.
There are a series of CAB files floating around here somewhere that have all the correct settings for each of the Tmo plans.
Same phone also ulocked for T-mobile Final solution
I suggest that you start afresh (Hard reset your phone)
then go to this link and download the cab
http://forum.xda-developers.com/showpost.php?p=1521768&postcount=70
download this cab
tmobyjoe599.cab
I had the same problem as you but that worked for me and im sure it will work for you.
Oh before i forget make sure that you disable automatic wireless configurator, that stuff is crap.
p.s note to be a pain in the ass. Next time search the forum even google will lead you to the answer of your question.
i recently got a Vario III from T-mobile its been unlocked to any network and now i have an O2 UK sim card in it. The problem i have is that i can not send any mms messages. I asked O2 to send me the settings. They said they'll have to send by e-mail. 2 settings were send to me one for internet which works fine and the second one was for mms. Unfortunately the second setting was an instruction to click on a button that is only availible on their XDA stellar. I repeatly asked for O2 mms manual settings but they kept sending me the same thing. I resorted to keying my own settings in that i found on the web.
Under mms settings server tab.
Server name: O2UK
Gateway: 193.113.200.195
Port number: 9201
Server address: http://mmsc.mms.o2.co.uk:8002
Connects via: o2 (The internet settings which works fine)
Send limit: 300k
WAP Version: WAP 2.0
Even with these settings i am still unable to send or recieve MMS messages. I suspect the icon button that O2 are asking me to click on is a cab file thats stored on the XDA Stellar maybe this cab file is my solution?
Any help would be welcome.
9 months ago I upgraded from a Mini S to a Trion. The Mini S didn't have the correct settings in it, so I had to install them manually.
However, I never managed to get it completely right. Sure they worked, I could receive and send MMS messages, then I found that it was going over the "wrong" connection and was costing me both messages and data, so do watch out for that one.
On my new Stellar, it does seem to be working with no side effects, although it switches from one thing to another to send MMS messages. I'll try and copy out the data I have on mine. If you need more, do ask...
Start -> Settings -> Connections -> Connections
"My ISP" -> Manage connection
Name "Mobile Web",
Modem Cellular Line (GPRS, 3G)
Access point mobile.o2.co.uk
Username O2web
Password (Think it is "password", see here)
Domain <empty>
-> Advanced
TCP/IP-> Use server assigned IP, rest deselected
Servers -> DNS 193.113.200.200 193.113.200.201
"My Work Connection" -> Manage Connection
Name "O2 Active"
Modem Cellular (GPRS, 3G)
Access point wap.o2.co.uk
Username o2wap
Password (Probably "password" again)
Domain <empty>
-> Advanced
TCP/IP -> As above
Servers -> "Use server assigned addresses"
Start -> Messaging -> Menu -> MMS Options -> Servers
Name "O2 UK"
Gateway 193.113.200.195
Port 8080
Server Address http://mmsc.mms.o2.co.uk:8002
Connect via "My Work Network"
Send Limit 300k
Wap version 2.0
Hopefully all that makes sense if you work through it.
"My ISP" are the internet settings are that I use to browse the web. "My Work Network" appears to be O2's WAP settings and is used to send MMS messages, so it looks like you might need to use it for that.
I'll also have a look and see if I can find the cab you were on about.
I hope that helps.
Please forgive the double post, I expected it to take longer to find.
I honestly don't know what each of these do, but they are all the cabs I found in /windows. I am assuming the smaller ones are the actual configurations themselves and the O2 Custom thing is the application that will install everything else. The "plugin order" cab file makes me wonder if this also has a bunch of today plugins attached to it, but I honestly don't know (I haven't hard reset without installing the extRom and have not used any other WM6 devices).
Does WM6 come with a bunch of today screen plugins for things like running programs etc... ? (ie beyond dat/time, calendar, tasks and messaging). Before this I only used WM5, so I don't know if you're going to get a bunch of extra today plugins tagging along (they aren't *bad*, they're just pointless if you read these forums as you'll no doubt either get better for free or have bought something like Mobile Shell).
Let me know how you get on.
Thanks for your help. I aligned all my settings to the same as yours but made no progress what happens is the message tries to send and is placed in the outbox but never succeeds. So I had a look though the cab files you kindly uploaded, the only file that looked like it maybe the one i need is MP_MMS4.0_O2UK_POSTPAID_Kaiser_070809.cab. So i ran it from my memory card the result was not good. the mms doesn't even go to outbox now. hehe. oh well i could always restore the rom and maybe stick to a t-mobile sim card if a want to send mms. unless you have any other suggestions?
Am i the only person trying to use a Vario III with a O2 sim? Surely there are others but i guess mms messages aren't a function people use that often.
The following page on the O2 website allows you to have the settings sent direct to your phone as an SMS:
http://getsettings.o2.co.uk/ServeSettingsWebApp/
I'm not an O2 user, so don't know if this works or not. Sorry if you've already tried this.
Ninimoe said:
Thanks for your help. I aligned all my settings to the same as yours but made no progress what happens is the message tries to send and is placed in the outbox but never succeeds. So I had a look though the cab files you kindly uploaded, the only file that looked like it maybe the one i need is MP_MMS4.0_O2UK_POSTPAID_Kaiser_070809.cab. So i ran it from my memory card the result was not good. the mms doesn't even go to outbox now. hehe. oh well i could always restore the rom and maybe stick to a t-mobile sim card if a want to send mms. unless you have any other suggestions?
Am i the only person trying to use a Vario III with a O2 sim? Surely there are others but i guess mms messages aren't a function people use that often.
Click to expand...
Click to collapse
Hang on, you on payasyougo? Am fairly sure they have different usernames and passwords, access points etc.....
Try again as above, but with the following change in the relevant section.
"My Work Connection" -> Manage Connection
Name "O2 Active"
Modem Cellular (GPRS, 3G)
Access point payandgo.o2.co.uk
Username payandgo
Password (Probably "password" again)
Domain <empty>
-> Advanced
TCP/IP -> As above
Servers -> "Use server assigned addresses"
The "My ISP" settings will also probably need to be changed, but you said you had that working so I shall assume you know more about that than me.
Cavey.co.uk said:
Hang on, you on payasyougo? Am fairly sure they have different usernames and passwords, access points etc.....
Try again as above, but with the following change in the relevant section.
"My Work Connection" -> Manage Connection
Name "O2 Active"
Modem Cellular (GPRS, 3G)
Access point payandgo.o2.co.uk
Username payandgo
Password (Probably "password" again)
Domain <empty>
-> Advanced
TCP/IP -> As above
Servers -> "Use server assigned addresses"
The "My ISP" settings will also probably need to be changed, but you said you had that working so I shall assume you know more about that than me.
Click to expand...
Click to collapse
On top of this you need to go through a specific proxy as follows:
HTTP: 193.113.200.195 Port 8080
WAP: 193.113.200.195 Port 9201
Secure WAP: 193.113.200.195 Port 9203
Socks: 193.113.200.195 Port 1080
Also a note, I wasn't able to get MMS working untill I Flashed to Dutty's WM 6.1 Hybrid ROM
Audio said:
On top of this you need to go through a specific proxy as follows:
HTTP: 193.113.200.195 Port 8080
WAP: 193.113.200.195 Port 9201
Secure WAP: 193.113.200.195 Port 9203
Socks: 193.113.200.195 Port 1080
Also a note, I wasn't able to get MMS working untill I Flashed to Dutty's WM 6.1 Hybrid ROM
Click to expand...
Click to collapse
Good shout. My phone keeps setting my HTTP and socks proxy to 127.0.0.1 in order to match the desktop computer (stupid, stupid activesync) so I had ignored it. I didn't realise there were more settings in there that could be relevant.
It seems the very important ones are the WAP and secure WAP proxies (which activesync doesn't seem to be configured to break). Mine are set to the values given by Audio.
fisha21 said:
The following page on the O2 website allows you to have the settings sent direct to your phone as an SMS:
http://getsettings.o2.co.uk/ServeSettingsWebApp/
I'm not an O2 user, so don't know if this works or not. Sorry if you've already tried this.
Click to expand...
Click to collapse
Unfortunately O2 can't send mms settings to kaiser and probably not any phone that uses WM6 but it was worth a try. thanks
Cavey: I'm on contract with o2 so the initial settings you gave me should work but doesn't. i've tried keying Audio's proxy settings in too, but still no luck. I also restored the phone to its factory settings then re-keyed all the settings in, the result is still negative.
As you mentioned, O2 are charging for the unsuccessful attemps of sending mms. I have 500 sms but 1 mms = 4 sms. i'm running out fast so i think i'll give it a rest for not until my allowance resets.
Maybe i'll follow in Audio's tracks and install a Dutty rom. only had the Vario III for less than 1 month though and know very little about flashing the rom on this phone.
Cheer's for everyone's help for now.
FINALLY!!!!!
I can send and receive mms on my (unlocked) t-mobile TYTN III using an O2 sim card. All of Cavey's setting were right the only difference is I had my phone flashed by T-mobile from wm6.0 to wm6.1
I was having alot of trouble with the phone as i was no longer a T-mobile customer hence the O2 sim card, they were reluctant to do and repairs for me, but the phone was still under 1 year so definately under their warranty.
For those interested in the problem i was having. All i had to do to cause the phone to crash was do a hard reset via the little hole at the bottom of the screen. The problem then arise.
-only be able to make 1 call before i need to reset again
-screen won't tilt when i slide out keyboard.
-if any event starts the phone vibrating it wouldn't stop vibrating till the battery runs dead
Solutions:
-don't do a hard reset (not always possible) plus the problem can randomly occur.
-hard reset the phone whilst charging
If anyone fall under the circumstance whereby they are no longer under contract with T-mobile, but the phone is still under warranty. Tmobile will have to honor it. Receipts will help you prove this. They'll say things like its impossible to send your phone to repair, because you don't have a t-mobile number for them to setup the repair form, but it can be done. They'll have to assign a PAYG sim (provided by the shop) to the phone. That's basically it.
Anyway after all that i have a new rom and it accepts the mms settings that cavey posted for me. Been such a long time my O2 contract is almost up and I'm looking at new phones.
Thanks to Cavey, Audio and fisha21
AT&T Tilt won't connect to GPRShttp://forum.xda-developers.com/newthread.php?do=newth
I've been having problems getting my unlocked AT&T Tilt to connect to T-Mobile's GPRS data network. I've done the necessary connections setups, including entering the proxy server settings (216.155.165.050:8080, etc) as well as running the disablehiddenproxy .cab in the Windows folder, but it just won't connect. And, when it appears to have connected, I can't access any websites. Every attempt simply ends up with an error message with something like 0x8008000. Google Maps won't work either, so the issue isn't limited to PIE.
I've entered the same settings on multiple phones in the past, including two HTC phones (Dash and Wing), so I know I didn't mess up on any obvious settings. I don't know what could be wrong. Has anyone experienced this before, and if so, what did you do to fix it?
Thanks.
Anyone? So far still no dice. WiFi works, though, which I guess is something...
EDIT: Nevermind, I think I got it. Apparently I needed to clear the SOCKS proxy setting. It's news to me, as I didn't need to do that before on either the Dash or the Wing.
Anyway, if anyone else is having the same problem, here are the instructions (specific to the proxy settings) I found and followed to get it working:
Go to set up proxy server
Check box that says “this network uses a proxy server to connect to the internet”
In the proxy server type 216.155.165.50 (you might want to highlight and copy because you will be using this setting 3 more times)
Tap advanced
Tap HTTP (if the server is not filled out paste the proxy settings in the step above in the server box) and change port from 80 to 8080 then hit ok.
Tap WAP and paste or type the same proxy server (216.155.165.50). The port should automatically say 9201. Leave this as is, then hit ok
Tap secure wap and paste or type in the server settings from the last 2 steps. The port should say 9203. Leave as is as well and hit ok
Tap Socks and clear the server setting. The port should go away. Hit ok, and you're done.
Info:
- HTC Diamond US Version 3G/Quadband
- AT&T Sim card w/ active data plan
Problem:
- Cannot connect to internet. Exchange server does not sync.
When I try to go to say google within Opera or IE it does not connect. Opera gives me this red screen saying unable to access network.
I am however able to use the phone and send/receive text messages.
Troubleshooting:
- Called HTC, no help
- Called AT&T, don't support the phone, no help
- Best Buy sells the phone so I went in there, no help.
- Went to an AT&T store, no help
- Search function within this forum didnt reveal anything.
- I did take my SIM and try it in another HTC Diamond and same thing. So I am ruling out the phone being the problem.
Note: this SIM card works like a charm in my Samsung Blackjack2 and my Jailbroken iPhone.
PLEASE somebody help me!!!
I am pretty tech savvy and have been searching the net for 2 days.
If you need more info, please ask. Could be a data connection settings that i need to manual input?
~ Phillip
Help us out. What are your internet settings? Did you run the setup wizard for AT&T?
I inserted the SIM, followed instructions, set it up to autmatically detect AT&T settings.
I sets up the connection as Media Net which i believe is right.
I actually just had my first advance. I was able to get internet by removing the proxy server from the Media Net connection.
So internet is solved. Just trying to figure out how to sync with my exchange. Which i have done with other phone a dozen times with no problems (so i know my user name, pass, domain and stuff are accurate)
What else do you need to know.
Every setting
I read this in another thread:
I tried the connection wizard and couldn't get online. I deleted the connection and manually setup a connection called Cingular GPRS:
Cellular Line (GPRS, 3G)
wap.cingular
User: [email protected]
PW: CINGULAR1
That's it. No domain or advanced server settings.
that enabled internet for me. not able to sync my exchange server still. small chance it could be something small i am doing wrong.
Where can I locate "edit account setup"???
taken from this -
For e-mail, you have to edit the "Advanced Server Settings" under "Edit Account Setup". There is a drop down box "Network Connection." I believe it defaults to "The Internet" which never works for me. You can either change it to Media Net or a custom connection if you make your own.
YouTube doesn't work with the Media Net connection because of the proxy. You can either disable the proxy in the Media Net connection or create a new connection that has the proxy disabled. I usually do option 2 and create a "No Proxy" connection that is identical to Media Net except no proxy. (I like to leave the Media Net w/Proxy just in case I need to access some AT&T thing.) I then set all apps to use the "No Proxy" connection (mail, MMS, etc)
Problem Solved.
Solution:
Once you insert the SIM and follow the setup. NOTE: the setup provided for Media Net is not correct. Follow my steps in post #5 by deleting the Media net and making your own.
Once this is done, then you will have access to the internet. Then you can setup your email exchange.
If you setup your email exchange first, it will not work. Follow steps in Post #5 then go back and erase your mail account. Start a new account and bingo.
Hope this helps some newbies like me.
~ Phillip