Database Develop

3G No longer working?

I live in the Chicago area and am testing out AT&T service and the Tilt (thinking of switching from Verizon). Anyway, late last night the Tilt started searching for signal and could not find the Voice or Data network. I tried doing a hard reset... still nothing. When I got up this morning, it was still searching. I tried another hard reset, and now it is able to get on the voice network. The data network is working as well, but only as Edge, as it does not seem to see 3G capabilities anymore.
My question is do you think this is an issue with the radio, the SIM or simply AT&T's network. I was using 3G with no issues since Friday. The phone is brand new and was working flawlessly until last night. I did not perform any tweaks, or install any software other than Flexmail.
Your input is appreciated.
SC

Dont worry, it could be just a network (provider) issue.
I got 3G signal at home, but sometimes (very rare) I got GPRS only
It will be ok

i am in chicago and all of today couldn't get on 3G, I hope it is network because I didn't change anything from when it was working till now

I don't think this is a network problem. For 2 days everything was fine. Now, mine does the same thing as eras2r. Works fine on Edge but when I am on 3G, it not only fails to connect for data, but it also kicks me off the voice network. Takes about 5 minutes or more to reconect. Sometimes it throws me out when 9n 3G area for no reason. AT&T told me to return, but since I was Premiere, I could only do an exchange. Total suck. Hopefully I get my new one and it won't have this prob.
Turns out it was a radio ROM problem. Need to make sure you are using:
ftp://xda:[email protected]/Uploads/Kaiser/Radio/KAIS_Radio_Only_1.27.12.17_CustomRUU.rar
I had 1.27.12.11 and it was killing me, but now all is good in the World!

Help Pls!Can`t connect to network

Hi,
I recently purchased an AT&T Tilt (HTC Tytn II) and unlocked it so that I can use it with the Rogers Network. It worked perfectly for about three weeks then I took it to Orlando for a vacation. While I was there, I change the network setting to manual and connect it to AT&T Roger so that I can use it as a roaming phone. When I got back to Canada, I changed the network detection back to automatic and it connected to Rogers for about 10 seconds then it lost the connection. So for about 10 seconds, it worked but only lasted 10 seconds. I also notice that when it connects it shows E (Edge) as a data connection. After 10 seconds, it changed to 3G. As soon as it changed to 3G, it loses the connection.
I wonder if anyone has this problem. I don`t know if this is because I used it on an AT&T roaming network. I`m very puzzled and any help is greatly appreciated. Thx!

I am having the same problem. I travel to New York quite a bit. My phone would give me a message that it was unable to connect to the GPRS network. So I would go into the Comm manger and deselect the 3g. Then the phone would get a signal. I was not getting a 3g signal, but an edge signal. When I would come home to Ft.Lauderdale the phone would work fine no problems with the 3g till last week.
Soft reset I get the 3g signal 4 bars then it disappears I get no signal ! and then I get an Edge signal in about 5 seconds or so. Everything works but I am unable to get the 3g speed.
If I try to force the phone into a 3g signal by selecting WCDMA on the band I can get a 3g icon. The voice part works fine and displays utms but any time I try to use the data I get some sort of error message. Like dialed "proxy" no response or the remote party would not connect.
Do you think that we might have something corrupting the radio?
Scott
Old At&t
8525 Radio 1.54.07.00
HTC lite 2.5/ Black Satin
spl 1.04/ 2.10

My old at&t rom doesn`t give me the option of selecting the band. Maybe I should flash it with HTC rom and at least get the voice part to work. I don`t know if the security scanning machine at the airport will harm the phone in anyway. They always ask us to take out the laptop and camera separately.

Problem with radio

In communication manager i see that i am connected with my provider, signal is OK but i can't connect or even send SMS. The sim is OK (tested in another phone, even test another sim on shift).
I flash the new rom with the phone enabled, tried again the old radio with previous ROMs but no luck. Everything else works fine, signal is OK but no communication at all.
Any ideas????

what do you call "connect"? phone calls? data?
What rom do you use
What radio did you try
Are you GSM or CDMA?

By saying "connect" i mean that i get the signal bars and by pressing the antenna image a popup says that i am connected with my provider. I am GSM, and i don't have data neither i can send SMS. This happen after four months of use your liberated ROM with the GPS (excellent job by the way). I am trying now your latest ROM with phone enabled and just after the flash i just made one phonecall succesfully and then everything stop working again when i tried to send an SMS. Now although the signal bars and all my provider information are OK i can't send SMS, make a voice or data call.
The reason of using the latest ROM was to change the radio part in case something was wrong with it - i am thinking now that maybe is a hardware problem......

If your problem is you don't have data and sms, try searching forums for "network wizard cab", download and install it, soft reset, open Settings->Connections->Network Wizard and select your country and provider.
After you get your settings you can uninstall Network Wizard if you want

I have tried this http://forum.xda-developers.com/show...53&postcount=3 after some search in the forum but unfortunately doesn't include Greece (my provider is Wind in Greece).
But after installing a new ROM a Connection Setup wizard runs and configures the device with the correct settings for data, but always after a reset i have the same problem.

Solved: i choose manually the network and the band in SIM settings and everything works OK. The only problem is that it doesn't connect any more in 3G, only in GPRS.

gmarg said:
In communication manager i see that i am connected with my provider, signal is OK but i can't connect or even send SMS. The sim is OK (tested in another phone, even test another sim on shift).
I flash the new rom with the phone enabled, tried again the old radio with previous ROMs but no luck. Everything else works fine, signal is OK but no communication at all.
Any ideas????
Click to expand...
Click to collapse
i have a same problem with u,only can connect using gprs,i think i am the only one have this problem,hope someone will create a new radio to make me use a 3g or hsdpa

putrawanz said:
i have a same problem with u,only can connect using gprs,i think i am the only one have this problem,hope someone will create a new radio to make me use a 3g or hsdpa
Click to expand...
Click to collapse
me +1
I posted the same problem a few months earlier...
at that time, my solution was to try to flash different roms...even those for other models...
the effort worked only temporarily...
after staying connected for a while, the connection drops (the screen shows it is still connected, but it is not connected)
i'm now also waiting for a solution...
BTW, if i set the reception to GSM only (GPRS)
gprs works fine and remains steadily connected for days

windows live help!

hi guys, i have a tytn 2 and the problem is whenever i try logging on to windows live it says something about low reception error, even though i am connected to the net and the net works fine. wen i put a different network in everything works along with messenger but why? the network that giving trouble is 3g the other is not i have done a hard reset already and hsdpa is off. i'm currently in jamaica using claro 3g unlimited internet access, this one gives the trouble but when i put in digicel and its not 3g it works fine.

[Q] Tilt Tmobile Roaming = No Internet

So the title says it all. I have searched for the MMS & internet settings, and I got everything working just fine except the internet. While I am on T-Mobile towers, everything works great! But when I roam onto a ATT tower, internet stops working. But on the other hand, MMS still seems to work. So I can send and receive picture messages, but have no internet access, wtf? I can be using google maps to track me with GPS but the second I roam over to an ATT tower I get a connection error. This is very frustrating. I am using their new prepaid $50 unlimited everything plan and so far I like it, but my phone is ticking me off. I already have checked the settings like epc.tmobile.com and I have tried internet2.blah blah, etc. So anyone have the correct settings to make this phone work on ATT towers?