Hi mates. i was using TNT WM 6.1 Rom. and now i tried to upgrade my device to TNT 6.1 v2. but my wizard stucked at bootloader after successful upgrae.
i have ipl 3.08 and spl 3.08. then i installed the Button rom. and with that my IPL goes to 1.01 and spl 3.08 but the button rom also stucked at bootloader after successful upgrade. this was happening first time.
so kindly help me with this situation. or if there is any other rescue rom. then plz send me link.
now my wizard always stuck at bootloader screen.
Regards
You can't go from 3.xx to 1.xx bootloaders
try to restore 3.xx
i have restored the IPL to 3.08 and SPL to 3.08 but still it freezes on the bootloader window where it displays the ipl spl gsm and os info.
what i will do now. to rescue my device. actually i want to enable rapi services. but wizard service tool is not working in bootloader mode. and the device is freezed at the info screen. so any other possibility to enable rapi. so i will reflash with shell tool.?
If the CID is already unlocked then follow drugstore's thread with the mtty solution
bro the CID is not already unlocked. i flashed many times with wizard love rom / button rom / & Xdaminiis rom. but all i got is only ipl changed to 1.01 but the spl remains 3.08 so i need to downgrade the spl as well. please help..
Thanks.
im in the same situation. ipl 1.XX.... and spl 3.08 ... its a wizard G4 ... and stuck on green info screen or bootloader. help !
Related
1-15. Done
16. Watch the rebooting of your PDA, if BOTH IPL and SPL are 1.xx then great. Quite probably your IPL will be 1.xx and your SPL will be 2.xx. Rerun the button 1.05 ROM downgrade a second time and it will become 1.x on both IPL and SPL. You don't need to redo the unlocking.
when i try this I can't get the SPL to go back, IPL is fine, but i've tried 4 sucessive times, no chance..
I then tried this :-
Step 17 - Download and install the 3.08 IPL/SPL rather than the 2.26, your choice! (I suggest doing the T-Mobile 2.26 first but that's me )
that went ok, and then I tried flashing roms, but the only one I can get to work is the Wizzard Love ROM.
I'd love to run WM6 but i can't, if i try the other ROMS they flash ok, but I just go back to the Wizzard ROM when it reloads
any ideas ?
very many thanks, Will
Will_Plaice said:
1-15. Done
16. Watch the rebooting of your PDA, if BOTH IPL and SPL are 1.xx then great. Quite probably your IPL will be 1.xx and your SPL will be 2.xx. Rerun the button 1.05 ROM downgrade a second time and it will become 1.x on both IPL and SPL. You don't need to redo the unlocking.
when i try this I can't get the SPL to go back, IPL is fine, but i've tried 4 sucessive times, no chance..
I then tried this :-
Step 17 - Download and install the 3.08 IPL/SPL rather than the 2.26, your choice! (I suggest doing the T-Mobile 2.26 first but that's me )
that went ok, and then I tried flashing roms, but the only one I can get to work is the Wizzard Love ROM.
I'd love to run WM6 but i can't, if i try the other ROMS they flash ok, but I just go back to the Wizzard ROM when it reloads
any ideas ?
very many thanks, Will
Click to expand...
Click to collapse
"17. My suggestion, take for what it's worth, is to download and install the T-Mobile 2.26 ROM
This will give you a strong 2.26 IPL and SPL to work with."
'Now you SHOULD have a IPL and SPL of 2.26 to work with. If not, you screwed up! Don't attempt to install someone's hard work and ***** before you do these steps!'
EDIT for Step 17 - Download and install the 3.08 IPL/SPL rather than the 2.26, your choice! (I suggest doing the T-Mobile 2.26 first but that's me
Well,
You missed the all important step 17,flashing the T-mobile 2.26,this cud have given you solid IPL/SPL 2.26 to work on,Instead opted for Edit to step 17,flashing 3.08.
Your device is not CID unlocked,download WST tool and check the status of your phone,
secondly you shudn't have upgraded your ipl/spl to 3.08,till you were sure your phone is cid unlock and both the ipl/spl are the same.
anyway download the wst tool to check your phone's status and post the report here,
bugger...
i tried another rom and am stuck in the bootloader...
i have 3.08 for IPL and SPL
I think the WST will not work from the bootloader (and i can't find it to download)
any further sugestions ?
I have tried both the t-mobile and button roms
tia will try not to do any more damage ;-)
Will_Plaice said:
bugger...
i tried another rom and am stuck in the bootloader...
i have 3.08 for IPL and SPL
I think the WST will not work from the bootloader (and i can't find it to download)
any further sugestions ?
I have tried both the t-mobile and button roms
tia will try not to do any more damage ;-)
Click to expand...
Click to collapse
In this particular situation no rom will flash,the only option is to get the IPL/SPL back to 1.xx,only than you can unlock.
If you are in boot loader,try to flash buttons 1.05 again,if worked,ok. otherwise download the latest official rom from the carriers site and flash,it will work and bring back your phone in working status.then flash button's 1.05 to unlock with lokiwiz02b.
Are you having any sdcard in your phone,remove it,it'll help,sometimes sdcard freezes the boot loader,by removing it,boot loader mode is released,good luck
many thanks, i came across a IPL SPL 2.26 only ROM and this I managed to get to flash, and with your advise I now have WM6
thanks, Will
Will_Plaice said:
many thanks, i came across a IPL SPL 2.26 only ROM and this I managed to get to flash, and with your advise I now have WM6
thanks, Will
Click to expand...
Click to collapse
THANKS
Glade it's up and running
Hi,
I have a sim unlocked MDA Vario (T-Mobile), but i want install any custom rom to it. I have followed this guide http://forum.xda-developers.com/showthread.php?t=298613 but instead lokiwiz i used the aWizard-V1_3beta2.zip. At the first step i downgraded my phone with Xda_MiniS_LaunchROM_v154102. I used the u function for the cid unlock after my device is restarted. But i cannot flash any rom into the device. I still get the 302 error. My device is still Cid locked? After the cid unlocking i got IPL 1.xx and SPL 2.xx after i reflashed with the buttopn 1.05 and the t-mobile 2.26 after i get the 302 message when i tried to flash a different brand rom. My original is IPL 2.26 / SPL 2.26 ROM is 2.26
Strange.... I compared the two dumps from two programs aWizard-V1_3beta2 / Lokiwizardb2 /lock_backup.bin before unlocking and cidunlocked.bin after unlocking/ is the same in the two programs. The question is? How possible the patched dump which is the lock_backup.bin is the same as the secondly patched lock_backup? The soft is not really pathcing?
What is wrong?
Thank You,
You're not CID unlocked yet. You need to flash and reflash the XDA_MiniS rom or the button ROM until both your IPL and SPL are 1.xx and then CID unlock your phone. Sometime it takes a few time (up to 7 times or more) to get both your IPL and SPL to 1.xx so be patient and keep reflashing until you are successful. Once you're successful, or think you are, download and run Wizard Service tools (google for it) and click on CID actions to verify that you are actually CID unlocked and then flash back to the t-mobile ROM. After that you should be able to flash any ROM you want.
Thanks... Your method is working great....
Can't Downgrad SPL 3.08
Tried 9 times now to flash the Button Rom to downgrade and I get the IPI to 1.05 (or 1.01) but the SPL is still stuck on 3.08. Any suggestions to download so I can unlock the CID?
thanks
Marcio
IPI 1.01
SPL 3.08
GSM 1.12.10
OS 1.5.4.2
i've to flash my wizard with german t-mobile rom, i flashed with CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE evrething were ok and i've begin to flash with RUU_Vario_AKU3.3_3822_382120_026911_TMO_DE_GER_Ship.but nothing changed and now after flashing a new rom wizard loads CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE this rom and freezes. ipl 1.01 spl 2.21 what shall i do?
flash again dude!
didn't help) ipl 1.01 spl 3.08.0001
If it is still "ipl 1.01 spl 2.21", then flash Buttons 1.05 ROM and CID unlock your device.
If it is now "ipl 1.01 spl 3.08.0001", then you mixed G3 IPL and G4 SPL. It is a high possibility that you are going to brick it. Try to flash with your original stock ROM. If that doesn't help, then it is a brick.
I believe that my brother' Wizard is CID unlocked already, because I also flashed many WM5 into it. But few days ago I tried to flash the WM6.1 and now it is stuck at the 1st splash screen.
I have a lot experiences from flashing rom by Hermes, Atom, Herald, Kaiser… I have read and tried many time how to solve this problem but it did not work. The re-flashing progress was exellent with ’ CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE’, the screen still say as below:
IPL 1.01
SPL 3.08
GSM 01.12.01
OS 1.5.4.2
But any flash with other roms like T-Mobile 2.26 was stopped by connection or ID errors. The problem is how can I get the IPL/SPL back to 1.xx!
Appreciate any help!
Thanks!
Run the button rom ( custom rom you identified ) again - it can take a few tries, but both your ipl and spl have to be the same 1.xx
You need ipl/spl of 1.xx to unlock
You need ipl/spl of 2.xx to upgrade to wm6
I had to run the button rom twice to achieve this
Good luck
bill_in_mtl said:
Run the button rom ( custom rom you identified ) again - it can take a few tries, but both your ipl and spl have to be the same 1.xx
You need ipl/spl of 1.xx to unlock
You need ipl/spl of 2.xx to upgrade to wm6
I had to run the button rom twice to achieve this
Good luck
Click to expand...
Click to collapse
I know how to do it and did it many (10 ) times with custom rom but no good result. The IPL has been downgarded to 1.01 but SPL is still 3.08.
Anyway, thanks for your reply!
Sorry about that - was just trying to help
Check out the response from mestrini on the attached thread - he mentions something about the spl freezing if you downgrade from 3.xx to 1.xx
I was not aware of this info - and perhaps mestrini can give you some details on how to get around it - if that is the issue here.
http://forum.xda-developers.com/showthread.php?t=377038
Try to bring ipl to 3.08 by reflashing ipl/spl 3.08 to bring both ipl/spl to 3.08 and then flash the official stock rom to downgrade to 2.xx and then downgrade to 1.xx by button's rom 1.05.
Cheers!
zabardast_1 said:
Try to bring ipl to 3.08 by reflashing ipl/spl 3.08 to bring both ipl/spl to 3.08 and then flash the official stock rom to downgrade to 2.xx and then downgrade to 1.xx by button's rom 1.05.
Cheers!
Click to expand...
Click to collapse
I also did it many times by using IPL_SPL_3.08.rar, but after that could not flash with T-Mobile 2.26 rom to downgrade to 2.26. The connection error always appear.
2 days ago, before bringing IPL/SPL to 3.08 I also brought it to 2.26 and the flash ran well. But when I tried to downgrade to 1.xx by button rom 1.05, only the IPL was changed to 1.xx, SPL was still the same as 2.26.
I realized that many people succeeded by doing this but not me even the process is the same step by step! And I really dont know why?
nugift said:
I also did it many times by using IPL_SPL_3.08.rar, but after that could not flash with T-Mobile 2.26 rom to downgrade to 2.26. The connection error always appear.
2 days ago, before bringing IPL/SPL to 3.08 I also brought it to 2.26 and the flash ran well. But when I tried to downgrade to 1.xx by button rom 1.05, only the IPL was changed to 1.xx, SPL was still the same as 2.26.
I realized that many people succeeded by doing this but not me even the process is the same step by step! And I really dont know why?
Click to expand...
Click to collapse
If it had once got spl 2.26,you shud have tried to flash the button's a couple of more times to downgrade the spl to 1.xx,why again you upgraded to 3.08. Now I believe the SPL is locked at 3.08 and it requires more efforts to downgrade to 2.xx,the only way is to keep on flashing the tmo 2.26 some more times,if you are lucky,it might downgrade.Otherwise upgrade to 3.08 and keep using wm5 official stock Rom.
Cheers!
hi, i am downgrading my wizard for days now. i followed the guided by dr puttingham. but my SPL won't downgrade. i used the button ROM & even the wizard_love ROM for several times now. my IPL is now 1.01 but my SPL is still 3.08. my wizard is a G3
anyone pls help
thank you for your Assistance
Flash 2 Times in a Row the button Rom 1.05 and you'll get both ipl and spl 1.05.
Anyway (Since It is understood you are in the process Cid unlocking) if your IPL is 1.05 try the LokiWiz.
I Cid Unlocked having IPL 1.05 Spl 2.25.
Aldo
I thought it was
Flash 1.05; CID/SIM unlock; Flash 1.05; CID/SIM unlock again.
It's been so long
thanks for your reply. but i did both the cid unlocking using lokiwiz and tried lashing the ROM twice and it still doesn't work
there must be something you missed in the directions.
Youa have to run the lockwiz aplication twice also. one for sim one for cid. usualy when I have that type of problem it is starring me in the face and i cant see it. I recomend stepping away from it for a bit.
downgrade and unlock ipl/spl 2.16
hi,
got a g3 wizard from imate - imate k-jam. have been reading up on the various posts on flashing g3 devices.
on one of the posts thru wiki:http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
i saw this "With your device connected to your computer as Guest, run the file that your downloaded. It's pretty much self-explanatory. Agree to everything, and let it do it's thing. It is downgrading your IPL to 1.05. You can only unlock your phone if the IPL is 1.xx, you can't do it if your IPL is 2.xx."
my worry is that my ipl is 2.xx
can i proceed with this? is there anyone who has successfully been able to do those steps on a device with 2.xx ?
Please advice.
Try This
I was having the same problem using button 1.05.Try using this rom The Xda_MiniS_LaunchROM_v154102.exe. Find it in the tutorial and download.Then follow the instructions.