how can you extract the necessary cab file out of an exe file?
http://www.ocpsoftware.com
They have 2 products, the cheaper one is primarily for extracting stuff out of Cab files. Both products have a trial period.
RE
I was thinking more like a tool for my device to extract the cab from the exe, not a tool to use on a pc since activesync would xfer the cab once the exe is run on the pc anyways
Maybe PocketRAR. Can do on desktop, but never tried on PPC.
dyetheskin said:
I was thinking more like a tool for my device to extract the cab from the exe, not a tool to use on a pc since activesync would xfer the cab once the exe is run on the pc anyways
Click to expand...
Click to collapse
How about:
1. Click on the cab file to install it.
2. If you just wanted the program installed stop here.
3. Find the exe on your Device and copy to someplace safe.
4. Remove the program (uninstall it) from your Device.
Now if this doesn't cover your need then please be a bit more specific about what you are trying to accomplish.
I am Looking for the Same thing
I m also Looking for the same thing....
I think what he mean is ... For Example If i want to install POCKETRAR directly from Website to my Pocket pc.. if i go to www.rarlab.com they only have EXE file for Active sync (No Cab File)....
Is dere any software for Pocket PC that can directly Run "ActiveSync EXE files)"on Pocket PC to get the Cab files out of them.....so we can install application without the need of Computer
For that i will simply install the progam on my laptop without my PPC connected then find and copy the cab file. After I have a copy of the cab file I uninstall the program.
Unfortunately no direct on PPC solution.
Yeah but what would you do ... if you have a situation .. where you dont have windows pc ..... I use Linux ... i have to install applications to my friends pc to get it on my Windows Mobile... This will really help alot .. if someone can figure out a way to extract Cab from EXE.....
this is what i normally do:
1. download the EXE onto your PC
(make sure your phone is stay connected at ActiveSync)
2. run the file and STOP when your phone is popping up installation notice
3. open up an explorer go to "\Windows\AppMgr\Install" on ur phone
4. at that moment, you will find your *.CAB file temporarily
5. COPY the file, n' save it somewhere and retain a copy OR share it here
anyway ... that's the manual way but by far, I havent find any softwares to do it yet. good luck.
bengnism said:
this is what i normally do:
1. download the EXE onto your PC
(make sure your phone is stay connected at ActiveSync)
2. run the file and STOP when your phone is popping up installation notice
3. open up an explorer go to "\Windows\AppMgr\Install" on ur phone
4. at that moment, you will find your *.CAB file temporarily
5. COPY the file, n' save it somewhere and retain a copy OR share it here
anyway ... that's the manual way but by far, I havent find any softwares to do it yet. good luck.
Click to expand...
Click to collapse
thats a good way of doing it but if i want to get a cab from an exe is because i have ****y vista so i dont have activesync
Doesn't extract from the phone but, Uniextract will extract cabs from most exe's and installers on a pc. I use it all the time cuz I hate having to run an install or exe just to get a cab. Here's a download link from Softpedia
http://www.softpedia.com/progDownload/Universal-Extractor-Download-56951.html
oh man thats a real good find.
thanks alot!
thanks great program needed this for awhile
AL
Related
For a lot of program's i don't need a desktop to setup my PDA. But some programs like .net from microsoft, oziexplorer, citrix, resco-fileexplorer can only be installed from a windows-PC.
is there a way to extract or keep-from-a-temporary-space the .cab file that must be somewhere during the install.
wouldn't it be nice to totally rebuild your system with one button after flashing/testing a new ROM or after a empty-battery situation on holiday.
Strangely enough, this is exactly what I do. I stick to cab downloads where possible (keeping them on the SD) but there are ways to extract the cabs from the installer where there isn't one available. Theres a couple of ways you can:
1. Sometimes the installler is built on a zip and you can just open the exe in winzip. If you have winzip shell extensions installed you get an "open in winzip" option on the right-click menu.
2. If that doesn't work, run up the installer and proceed the the part where it copies it to the phone. There are two places you can find the cab. The first is on your PC in C:\Documents and Settings\username\Local Settings\Temp\. Sort by date to find the most recent file. The other place is on the phone itself...the installer actually copies the cab to the phone the installs it. I think you can find the cab in \Windows\AppMgr but it's been a while and that may be wrong.
some apps will put their cab on m$ activesync dir.
have u try sprite backup to backup ur system including storage.
Guy's,
thanks for your info. Got it complete in cab files on my storagecard now. Some i found in programfiles/activesync on the desktop. Sometimes it wasn't clear which cab file to use, so i started the install from the desktop. Then on the PDA when the question comes about where to install, then i started fileexplorer to see where the temporary cab file is. They all where in windows/appmgr/install.
thx,
xdaradar
I have down loaded several (cab) programs onto my Mac, then loaded this to the Kaiser. However, some programs only download from the internet as (exe). Can these load onto the Kaiser like (cab) file do? just checking before I do this.
those usually need to be installed to a PC first. then the PC installs them to the PDA device.
Unfortunately, we in the Mac world still have to use a PC every once in a while (please, no flame intended or desired).
There is one program, File Juicer, that can extract some .cab files from .exe files, but not most.
What you need to do is borrow a PC, download the .exe, double click on it. it will most likely be put in the c: drive, program files --->Microsoft ActiveSync. From there, you should see the .cab file and can put it on a usb drive and then put in on your Mac and transfer it over via Bluetooth.
It is the one frustration using these devices while living in the Mac world.
Thank you , I will give tht a try.
It's also worth trying to open them with your favorite app to handle ZIP files. The EXE is often just a self-extracting archive that doesn't actually require a PC to use.
there are two check and fix dead pixel program that you can run direct from the phone, it's a exe extention.
kms
Can someone please answer the most basic of N00B questions ...
1) How do I install .EXE files onto the Tilt
2) How do I install .CAB files onto the Tilt
Specifically, with # 1, I am trying to install KaiserTweak, but it does not run under Windows XP and there is no info on how to get it onto the phone and how to install it (it has an XML too).
Thanks!
copy them over to your kaiser. run them by clicking on them using file explorer
Ummm ... N00bier
Thanks, but HOW?
I have activesync running, and it is doing a bang up job. I cannot figure out how to get the EXE and XML over onto the phone.
Also, how would a CAB work, same way?
OMG!
cab - copy to phone and run through file explorer
exe - run through pc/ or run directly from the device
to copy files over to your PPC...
click the explore button on your activesync app running on your desktop from there you can drag and drop the files anywhere
I drag and drop .cabs to my storage card, I have a cab folder with two folders inside one is device and one is card. It is an easy backup and reminds me of where i installed that particular cab. Now, if you have an .exe or .msi you can run that from your desktop and as long as you are synced the install wizard will install the app to your phone giving you the option to install it on the device or the card.
Now, some applications are meant to be ran from your phone, such as mplayer or Kaiser Tweaks. You copy the file over to your device and click the .exe when you want to run the program.
Hope this helps!
I downloaded a couple of games i want to put on my phone to test.
but im unsure how to put them on. can someone help me out..?
thanks.
and also if anyone knows any good sites i could download games aswell, that your sure that will work.
Connect your device to your PC via activesync.
If they're .exe files, run them on your PC and follow the process (i recommend installing them on your storage card)
IF they are .cab files or if Windows tells you they're not valid win32 apps then copy them over to your device. U can use activesync to this, right click the activesync icon in the taskbar and click on explore.
Once the files are on your device, browse to where you put them using file explorer and tap the files to install...
This is pretty basic stuff so keep it in mind when installing any other app/game.
I have just bought a HTC Diamond. I am new to the world of Windows Mobile.
So far the phone is great! I love it.
I have noticed you can download lots of apps and tweaks.
I want just wondering how to instal these programs on the phone.
I have downloaded a few games, Unzipped and copied over the files to the phone. It recognioses one of the games with a '.cab' format and it installed, but the rest are .xml.
Any pointers, tips and hints for this phone?
Cheers
the program you use to extract compressed files identifies cab files as compressed. All you need to do is copy the cab files to your phone and run the file from there. If you try to extract a cab file, you'll get those xml files you talked about.
1. Copy cab to phone
2. Run cab from phone to install the program
good luck
elcom said:
1. Copy cab to phone
Click to expand...
Click to collapse
Hi - my first post!
You mention .cab files... I expect this applies to .exe's as well (for example, hot fixes)???
Any particular folder(s) on the phone we should be copying these files to before running them? I tried to install a hot fix today, but after running the .exe and receiving a 'success' message, the phone restarts OK, but the fix does not appear to have worked.
all exe install's for pocketpc's are pc exe files which have to be run
on the pc and then it use activesync to transfer the cab file to the
pocketpc and run it there
Rudegar said:
all exe install's for pocketpc's are pc exe files which have to be run
on the pc and then it use activesync to transfer the cab file to the
pocketpc and run it there
Click to expand...
Click to collapse
Thanks for the response.
Unfortunately, running the exe on my PC (Win Vista) doesn't seem to work.
Error: "{C:\filepath\filename.exe} is not a valid Win32 application."
Any ideas? I'm a complete newb at this so have exhausted my very limited list of possible ideas...
some people don't distribute their apps with installers so it could
just be the program itself
in which case you have to execute it on the pocketpc
this of cause mean that it will not put a shortcut to the exe
in your programs thats just something you have
to do manualy with a program like total commander
which you can also use to browse to where you put the
exe file and execute it to start the program
some people don't distribute their apps with installers so it could
just be the program itself
in which case you have to execute it on the pocketpc
this of cause mean that it will not put a shortcut to the exe
in your programs thats just something you have
to do manualy with a program like total commander
which you can also use to browse to where you put the
exe file and execute it to start the program
OK thanks - I already tried running the exe straight from my Diamond, and although it appeared to work correctly, the hotfix didn't actually fix what it claimed to. Not to worry, I'm still learning all this stuff (only had my Diamond for a day and a half now... ).