Database Develop

8125 DEAD!!!!!!!!!!! ARGH!!!!

hi
last night as usual i turned off my puter left the USB charger hooked up to my 8125 and then turned off my phone. (same process every night) this morning i came in to boot up the puter and turn on the phone, i noticed that the orange "Charging" light was NOT on on the phone. i tried to turn it on and NOTHING!!! i unplugged the USB cable still wont turn on, plugged the phone into the wall (AC) charger this time the orange light came on but the phone still will not come on. it is completely DEAD!!!! just to try something a little different i changed the USB port the cable was plugged into and tried to plug the phone into it again, nothing happend (no charge light, etc) went back to the AC charger and now it wont give the charge light with that charger either HELLP!!!!!!!!!!!!!!!! i am running the 2.17 ROM with very few programs & plugins and the phone has been ROCK solid maybe a few freezes here and there but nothing to even concern me. phone was working perfect last night 10 ,minutes before i turned it off. at the very least i would like to hard reset it to get my personal info off it before the cingular exchange, but i would feel more comfortable dowwngrading the ROM before the exchange as well. if anybody has any suggestions i am ALL ears.
thanks in advance

Take a deep breath.
Now go get your original charger that came with your 8125 plug it in.
You might to try and hit the soft reset as well.
This is a known problem with the wizard family. If worse comes to worse youw will have to get a new battery.

Breath INNNNNNN breath OUTTTTTT
OK thanks for the reply. so just to be clear you are saying this is a battery issue??? i have tried the soft reset button but nothing happens. the phone is completely dead. how can i verify if it is the battery? the phone will not turn on without a battery?? any help is appreciated
thanks again

You will have to plug your phone into the original AC Charger that came with it for a little bit.
The phone (and even the charge led) won't work until there is a minimal charge to the battery.
I had this happen and simply freaked out for about 10 minutes. Man was I happy once that little LED lit up again!

i had my wizard (8125) battery die on me suddenly. but i let it charge until the light came on, then finally let me power the damned thing on. it only had 2% battery left.

thanks again. very strange it has been plugged in all day with no signs of life. all of a sudden i pressed the ON/OFF one more time and it turned on just like it is supposed to, i am going to leave it on the charger all night but i am a little gun shy on whether to keep it or take the replacement from cingular on monday??? i would like to know why this happened so i can avoid it again in the future.

Some chargers are not up to spec. They may provide enough juice so that the phone says it is getting power but the battery does not charge right.
I have my stock wall charger by my bed and each night it goes on that overnight. Just to be safe

Master K said:
Some chargers are not up to spec. They may provide enough juice so that the phone says it is getting power but the battery does not charge right.
I have my stock wall charger by my bed and each night it goes on that overnight. Just to be safe
Click to expand...
Click to collapse
I do the same and have not had a single problem since I started the "Overnight Conditioning".
I used to use a RAZR Moto charger but it is underpowered (only 500mAh).
If you are going to use an off branded charger it has to be a good one and provide 1000mAh. Costs more but worth the investment. I found some nice portable USB Ports (one for the Car and one or AC) that have never failed me and since they are basically just a powered USB port that pushes upto 1000mAh I can use and compatable USB Cable!

HELP!! PHONE WON'T TURN ON

So I upgraded to the latest mr clean rom and did some tweaks with the registry Wizard. I was playing around with it for a while and turned it off to charge overnight. I wake up and try and turn it on and nothing. I've tried soft reset, and hard reset and it doesn't turn on or do anything. When I plug in my charger the light on my phone doesn't even come on. PLEASE HELP. WHAT CAN I DO!!!.

dew1989 said:
So I upgraded to the latest mr clean rom and did some tweaks with the registry Wizard. I was playing around with it for a while and turned it off to charge overnight. I wake up and try and turn it on and nothing. I've tried soft reset, and hard reset and it doesn't turn on or do anything. When I plug in my charger the light on my phone doesn't even come on. PLEASE HELP. WHAT CAN I DO!!!.
Click to expand...
Click to collapse
It seems that you bricked you phone mate. I think that you installed MrClean rom in a G4 phone so you irrimediably f*cked up the bootloader (IPL and SPL). Many users have reported that their phones were able to boot (and behaved normally) immediatly after the flashing but were dead after they turned them off for the first time, this is what happened to you.
Only thing you can try is going to bootloader mode (but i think it won't work since you messed the bootloader) and then flash a new rom. To do this, press and keep pressed both the keys on the right side and then insert a pin in the reset hole briefly. If the phone goes to the tri-colors screen then you're safe, if not continue reading.
If your warranty perior is not yet over then you can have a new phone for free (DON'T tell them that you flashed an experimental rom!!! Tell only that it went off suddenly or that you were installing an official rom!).
Service centre can repair your device (i suppose they've some method to reflash the bootloader) but i don't know how much they'll ask you.
Try asking other users on this forum. Sorry!
bye

...did you ry to recharge it with the ----ORIGINAL 1A CHARGER----? looks stupid, but i resuscitated mine just before throwing it in the bin. if it works, i will explain you the rest....

yup, I tried charging it with the home charger and still nothing. My battery reads at 3v and it's supposed to be 3.8 so it's not out of juice, but maybe it's just dead?

...you can try with just a normal 9 VDC battery, in order to boost up the voltage, to connect it for a few seconds to the ppc battery till you reach the 3.8 VDC and see if it's working...

Ok, i did that...and amazingly it turned on so I pluged it into the charger right away. Windows booted and about 20sec later the device turned off and won't charge again. So i tried again and the same thing happened. Do I need a new battery? TIA

dew1989 said:
Ok, i did that...and amazingly it turned on so I pluged it into the charger right away. Windows booted and about 20sec later the device turned off and won't charge again. So i tried again and the same thing happened. Do I need a new battery? TIA
Click to expand...
Click to collapse
This is waht you need:
http://www.thetravelinsider.info/phones/cellphonerecharger.htm
This charger is somehow wired weird... it charges the battery AND feeds juice to the phone at the same time (believe it or not, regular chargers and USB cables do not engage until the OS is loaded), allowing you to turn the phone on and in a few minutes plug it into the regular charger to continue charging. Just make sure you get the RAZR tip.
It has saved my ass more than once.

I fixed it , What I did was zap the battery with a 9v battery in 3 sec intervals, I did this about 5 times, then I pluged my phone into the charger and turned it on, the 9v gave it enough juice to boot up and the usb took over from there. So to everyone out there who is having this same problem, try this but don't over zap, check your battery with a multimeter.

im having the same problem----my MDA went dead last night because i forgot to charge the battery and then i went to plug it in the charger but the phone doesnt turn on no more...the light doesnt turn on like if it would be charging and i left it overnight and it still doesnt work..... do yall think that its the battery or is the phone just messed up and cant use it nomore????

Last time I had my battery completely drained, it wouldn't charge from laptop via USB. I read something about how the device's "smart-charging" function itself needs a bit of power to start-up...
but anyways, I couldn't charge the battery through the phone (software charging) - what I had to do was to take a USB cable, cut out one end, identify the +/- (red/black) wires, and charge them directly to the battery's two poles (metal plates). It took about 10-20 seconds of charging until I had enough power in the battery to place it back in the phone, start WM5 and charge it thru the phone.
It would have been much easier if you have a battery charger.

I had my phone connected to the computer through the usb cable, and I just left it connected for a week and it was completely dead and could not be turned on. I don't know how it drained the battery (probally by leaving the wifi on, but the computer was in use all the time). Anyway, thanks to this thread, I used the ac charger and it turned on.
Keywords: t-mobile tmobile mda phone won't don't turn on

phone down
thanks for infos

I'm going to give this a go; a Crossbow ROM flash went horribly wrong last night and in my attempts to repair it (I also must have flashed at least 9 times) the phone went dead. It won't charge either, but battery voltage is 3.7 volts, and I'm sat here wishing it was 3
Will get back to you all!

To update: no... it didn't work! I hooked the battery up to a computer power supply (nearest thing to hand) on 5v and 12v and the voltage increased to about 3.81V... I guess the battery is not the problem with my phone, though the symptoms were the same :-(
Any buttons I can press (i.e. like the voice command button for bootloader) to wake the damned thing up? It's probably fried.

Suggestion
CrArc said:
To update: no... it didn't work! I hooked the battery up to a computer power supply (nearest thing to hand) on 5v and 12v and the voltage increased to about 3.81V... I guess the battery is not the problem with my phone, though the symptoms were the same :-(
Any buttons I can press (i.e. like the voice command button for bootloader) to wake the damned thing up? It's probably fried.
Click to expand...
Click to collapse
My phone has a hardware problem with the on / off button (doesn´t work at all), at the beggining I thought it was a software problem and I tried all sort of tricks, then I gave up and recognized that was a hardware issue and I found 2 ways to turn the phone on 1) When is totally off (This happens when I have to remove the battery to change SIM card) I connect to the USB cable to my PC or to the car or wall charger and I make a soft reset. 2) When I see the phone signal led blinking I remove the memory card and wakes the phone up (not a good idea since I know that the card is going to get damaged sooner or later).

I just got a G3 wizard from a friend a couple days ago. On Thursday I upgraded it to XDA Mobile 6 and left it on the 2.25.11 (I think) T-Mobile Radio that the T-Mobile 2.26 firmware flash put on it. I used it all day on Friday and then I held the power button and shut the phone completely off for 25 hours, but left it plugged in to a usb to 110V AC adapter that came with my Dell Axim X50V. On Saturday night I went to turn it on and it would not come on no matter what I tried. I found this thread and checked the voltage on the battery directly with a multimeter, 3.13V. I cut the head off a usb cable and then held the black and red wires to the positive and negative terminals on the battery for 2 minutes with the head plugged into a front USB port on my PC. The multimeter then read 3.7V. I put it back into the MDA and it turned on, booted and informed me that the battery was completely drained. I plugged it into the USB to AC charger and it read 10% battery on BatteryStatus. I have left it to charge and it is currently at 60%.
I guess the lesson here is to not totally shut the phone off and let it sit, or the battery won't charge, even plugged into my charger. I guess the OS needs to be running in suspend mode for the charging circuit to run. I know I won't turn it all the way off ever again unless I have my little plug thing and my laptop with me.

(old) Nokia phones have a state called "Acting dead" (from service manuals) which takes place when phone is turned off and battery inserted. It means that the energy is flowing around the board so that the responsible hardware keeps waiting for a 'HIGH' signal ordering to turn ON the phone.
When batteries go bellow the 2.x volts they stop being charged by the phones. This is why i protect the battery terminals with tape when the phone is stored for some time and the reason why a lot of people thinks the phones are broken when not used for months. I usually use the 'freezer trick' where i leave the batteries inside the freezer all night and charge them next day.
just 2 cents...

My Wizard XDA got discharged over the weekend and wouldn't start up - after 12 hours on USB it still wouldn't start.
The charge tips saved my bacon - I modified a USB cable as per the instructions above, and used it to charge up the XDA battery - it only needed five seconds and the phone now boots!
Thanks All, great information!
My 2 cents...
If you're going to try the same, connect red usb to the +ve terminal of your battery and black USB to the -ve terminal of the battery. I'd suggest having a voltmeter to hand to check battery and supply voltage.
Disclaimer - the ablve worked for me, but I'm not responsible for anyone damaging themselves, their PC,their phone or anything else by using the above info!

BUMP! thought my phone was dead, hacked a USB cable and i'm back in business!!!!

TYTN II won't turn on
i left it plugged in all day and when i tried to turn it on it didn't respond. i have a second battery that was fully charged and that didn't work either. i tried a hard reset with it unplugged and with it plugged into the charger. nothing works. i'm on the standard at&t rom with lots of programs. i got it unlocked so i can't go to at&t.

bricked g4..

To anyone who bricked their G4..Is there still a sign of life like an amber or redlight when you connect it to the wall adapter? Thanks

try this separately:
1. plug in USB cable with PC on other side and wait 20 sec
2. soft reset
3. hard reset
4. bootloader mode
5. plug in usb or wall charger, leave it for 3-4 hours then try all over again.
and dont mention led lights, they may not be on.

Thanks for the info..I don't have a bricked G4 but just wondering if a bricked G4 would charge the battery...

no, it cant charge

I see, thanks Johnny, I kinda find that weird coz I though it only breaks the bootloader..

I seem to remember reading that the battery charging state doesn't initialize until after the OS is loaded. Which is why it is such a pain when due to accident or otherwise your battery is totally discharged and you can't boot your phone. I have had to use the 9v trick to revive mine and I also have a second battery that I rotate out occasionally to make sure I always have at least a partially charged backup.

but doesn't it charge when you connect the charger to the phone and the phone is off (without loading the OS)?

Lost all signs, phone doesn't turn on anymore(even on wall charger). Is it bricked??

Folks,
I was flashing CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE and the battery went down. The flashing procedure stopped at 85%.
After this incident I could not turn on the phone again. It spent all night recharging and nothing.
What should I do?
------------
Tmobile MDA VARIO
IPL 1.05
SPL 3.08
Wizard Love Rom

Did you charge it over night with the wall charger or with the sync cable? If Windows doesn't recognize the phone, as it might not since you were in the middle of flashing, it may not provide a charge through the sync cable. You might have just thought you were charging it but you weren't.

I was charging with the wall charger, and nothing happens at all (no lights, no bootloader)
Did I brick the phone?

Is there a way to brick the phone while flashing this rom and losing battery power or it's not bricked?

Try pulling your battery for 10 min or so and then put it back in. Phones don't usually get bricked by getting interupted in the middle of a flash. If they did, there would be a lot more people around here with bricked phones because I've see a whole lot of threads in here with people saying they got interupted in the middle of a flash. I don't think you should start worrying about that quite yet.

So I'm taking off the battery for a while, let's see what happens...
I can't see any signal even if the battery is out, and the wall charger is plugged anyway.

I've pull off the battery for about 20 minutes (battery was in refrigerator at this time) and nothing happened.
Is there anything else to do?
(ps:I'm not using the original wall charger...)

I've pull off the battery for about 20 minutes (battery was in refrigerator at this time) and nothing happened.
Is there anything else to do?
(ps:I'm not using the original wall charger...)
Edit:
Now I'm trying to do this below:
SteRo SteRo is offline
Junior Member
Join Date: Nov 2005
Posts: 15
Default
OK here's the solution.
First of all, be aware that the MDA can NOT charge unless the OS is fully loaded. If for whatever reason your battery gets fully depleted, you have to do the following (it involves ruining a 5 $ cable and doing some surgery):
- first, go out and buy a new USB-to-mini-USB cable, unless you have 2 already (or one and the original charger)
- take out the battery
- take the USB-to-mini-USB cable, cut off the mini-USB plug and expose the four wires
- strip the red (+) and black (-) wire and twist the copper ends of each wire
- now CAREFULLY attach the right wire to the right connector on the battery (so + on + and - on -) and tape it there so it stays firmly on
- put the cable in your (running) PC or put the charger in the wall socket
- let the battery recharge for an hour or so, then put it back in the Wizard and reboot
- now when it is fully rebooted, you need the second cable to charge your Wizard completely, the way you're used to.
Worked for me! I've kept the ruined cable, just in case it happens again.
Good luck!
Click to expand...
Click to collapse

Hope that works/worked for you, let me know if it does.

I made the cable, tried to recharge battery for 1 hour nd nothing again...no lights, no signs...still with a dead phone...
Does anyone have a suggestion?

Do you have access to a volt meter? If you do, check and see if you get any voltage on the battery at all. Maybe your battery is shot. Theres no reason for your phone to be bricked so I wouldn't give up just yet.
Theres also another trick that someone else having a similar problem in another post reminded me of to jump start your battery. It involves a 9v battery and a couple of wires (bread ties will work if you don't have any wires laying around). It's pretty much the same thing as the charger thing to an extent. You take the 9v battery and attach the wires(bread ties) from the - to the minus on your cell battery and + to + but only do that for 10 seconds and then remove them, wait 30 seconds and then do it again for 10 seconds. Repeat that 10 times and then put the battery back in to the phone and connect the charger. If that doesn't jump start it your battery might be gone for good.

Thanx, I'll try it too.
Maybe tomorrow I'll have access to a second battery with a friend of mine.(fully charged and working battery)
Do you know why is the phone not showing any lights? Is there any explanation (for the case it's not bricked)?

If the battery is completely drained it won't take a charge (this is actually a well known issue with wizards) the charge lights won't come on because they are actually taking their current straight from the battery.

if you not using charger that came with phone thats probably your issue charger that came with phone is 1amp most secondary chargers are 500ma

I think the phone is really dead now.
I´ve put my friend´s battery in my phone and nothing happened. (no signs)
My battery worked with my friend's phone too...
What are the solutions now? A new motherboard?

vdalesandro said:
I think the phone is really dead now.
I´ve put my friend´s battery in my phone and nothing happened. (no signs)
My battery worked with my friend's phone too...
What are the solutions now? A new motherboard?
Click to expand...
Click to collapse
I've just reread your initial post and i think you're both guilty and unlucky. Guilty for acknowledging the RUU warning about using a charged battery (check boxes) and unlucky because the flashing might have stopped while writing to the IPL zone.
So i do think that new board is the only solution here. Sorry.

Where are cheap boards for sale?

Gear one dead

So my galaxy gear one did not turn on this morning! No idea why! Any idea what to do? Odin and kies won't find it. Is it possible to get it repaired and how much would something like that cost me!

klauspabst said:
So my galaxy gear one did not turn on this morning! No idea why! Any idea what to do? Odin and kies won't find it. Is it possible to get it repaired and how much would something like that cost me!
Click to expand...
Click to collapse
You need to charge it internally, This issue is mostly a battery problem, i had the same issue the Device it dead, or you can tell a store that the battery is dead, and if they can jump start it once again.
Just Charge it with Positive 1v and negative 1v cables to the pin sockets inside it, if you do not want to go do this, see if there is a Repair shop nearby.
Let me know if you need anymore help.
Regards

JonteStark74 said:
You need to charge it internally, This issue is mostly a battery problem, i had the same issue the Device it dead, or you can tell a store that the battery is dead, and if they can jump start it once again.
Just Charge it with Positive 1v and negative 1v cables to the pin sockets inside it, if you do not want to go do this, see if there is a Repair shop nearby.
Let me know if you need anymore help.
Regards
Click to expand...
Click to collapse
Can I buy or make me a cable like that?

Would it be ok if I cut a charging cable and switch the wires?

Plug it into a computer, somehow that works when my gear fully drains and wont charge with the normal charger

Mine went dead last week also, I've been researching threads and most say charging via USB from laptop or desktop (USB 2.0 seems to be preferred) will bring it back to life. I've also read about hair dryers being helpful. None of that worked for me.
I read earlier that separating the motherboard from the battery could be helpful. I just did that (literally 20 minutes ago) and while the screen isn't on, nor do I see any indication of charging, my computer let me know that a USB device was connected this time.
I'm leaving it sit overnight (I still haven't screwed the back back on yet) to see what happens.

Well I left it overnight and still no life. I've gone even further and completely removed the battery now and will leave it out of the watch for a while and reassemble it later tonight and then leave it overnight again fully assembled in the charger connected to my PC via USB.

Another day of charging via USB after completely removing the battery and still no sign of life. I think I'm giving up. The computer still recognizes something is attached but that's as far as I get.

klauspabst said:
Can I buy or make me a cable like that?
Click to expand...
Click to collapse
All you need is two telephone wires the same type you would typically use in the USB Cable and Insert on the two copper sockets inside
Let me know if you need anymore assistance.

Mine completely overnight and then I didn't feel like charging for a few days. After a few days I went to go charge it and I could not get it to charge. I tried roughly 5-6 different chargers/cables and all sorts of different usb ports on laptops, car chargers, and nothing work. In middle of moving I took my chromecast off of my tv and remembered it was a microusb charger. Plugged it into my watch cradle and it came back on.

Connect your gear watch to USB port on your Notebook , after 5 min open charging cradle , while pressing gear watch to charging cradle try to turn on watch from power button with plastic card. After several attempts gear watch will turn on , close charging cradle and continue charging.

It seems to me there is a problem with the battery. Maybe you battery is dead. You need to remove the battery from your watch and keep it in the sun light for 15 min then try to charge it. If it doesn't work properly then contact with service center.