Problems playing videos in fullscreen - Tilt, TyTN II, MDA Vario III General

Hey, all of a sudden I can't play videos in full screen(landscape mode with windows media player. I don't know why this is happening. The only thing I have done to my tilt recently is install the spb mobile shell. Everytime I select full screen the video remains the same size and also has the wrong orientation remaining in portrait mode. I have also encountered another problem when I watch streaming videos from my computer through orb. The videos would not be in full screen. But I just assumed that was because the stream from orb doesn't support it. But as I stated my main problem is that none of my videos play in full screen or landscape mode.

Try use TCMP or Coreplayer. I gave my less trouble. WMP is troublemaker and user not friendly...

I really like Core Player for videos. The videos are very sharp, and it's a clean, easy format to use. No problem watching in full screen.
I only use WMP for audio.

KaiserTweak has a fix for this under the "User Interface" section (second to last tweak in this section).

IMO, i think you should migrate from WMP to TCPMP (or core player I suppose, though i don't know much about it.)
TCPMP is my favourite, as it can play pretty much anything you throw at it, there's a mass of options to tweak to get the video and audio just right for you, if you're interested, check this thread

Related

TCPMP

I installed the player but is there a way to change it to the defaults player for IE so when I go to youtube it doesn't try to load RealPlayer. In the program I looked over all the settings but didn't see one. I also went through and check that it was suppose to handle all file types just to make sure. thanks for any advice
After setting file associations .flv in TCPMP did you soft reset?
Have you installed the flv plugins for TCPMP?
I haven bothered to install RealPlayer on my Kaiser, it is on my Wizard, and I haven't missed it yet. TCPMP works fine for me on Youtube. If you unistall RealPayer does the incorrect file association recover?
Launch TCPMP
Select options, settings, select page.
A pop up allows access to all the settings including File Associations.
(s)He's talking about m.youtube.com loading RP.
Sorry, misunderstood.
I did set all the files assoiciations up. I also did a soft reset. I did install the flv plugins. Because the tilt comes preinstalled with Realplayer it isn't even listed as a program that can be removed.
any more ideas? Thanks for your guys help.
Yesterday I installed TCPMP on my Tytn II. I wanted to see if there was any improvement over the reported jerky playback of .wmv files. Unfortunately it could not read the .wmvs I tried to play and reported that it did not have the right codes. I thought that TCPMP would have the codecs 'out of the box'.
In any case I've just installed and tried Pocket Player but the jerkiness was still there. I increased the cache in the options but to no effect. I would like to try Core Player but can't since they do not offer a trial/demo version from their site.
As I understand the jerkiness of video playback is due to an OS bug and might be resolved with a ROM upgrade from HTC. However has anyone found a temporary/permanent solution?
Well I uninstalled and reinstalled TCPMP and left the defaults setup and it seems to work now.
Do you just get the jerky ness on wmv files? I have't loaded any yet cause I am waiting for my 4gb card in the mail.
I get the jerkiness to some extent also with .mp4 and .3gp files. I'm no expert on audio/vide/codecs etc. I just want to watch videos on long trips.
I've also tried encoding just a single chapter from a DVD and placed this in main memory. Same jerkiness so it's nothing to do with transfer rates from the MicroSD card.
jallenclark said:
I installed the player but is there a way to change it to the defaults player for IE so when I go to youtube it doesn't try to load RealPlayer. In the program I looked over all the settings but didn't see one. I also went through and check that it was suppose to handle all file types just to make sure. thanks for any advice
Click to expand...
Click to collapse
Guy go in the file Association area and check mark all the blocks, now your TCPMP/PLAYER will be the DEFAULT player, if this does not work PM me and I will send you the added software you might need!
I used TCPMP and now Core Player, they work very smoothly. I use RAW Framebuffer and encode my media conservatively 320 x 240, 96-128k stereo (it still sounds great even at 96kb) and a video bitrate around 475kb. I have to say it looks very sharp and clear on the 8525 and now my Kaiser
RemE said:
I used TCPMP and now Core Player, they work very smoothly. I use RAW Framebuffer and encode my media conservatively 320 x 240, 96-128k stereo (it still sounds great even at 96kb) and a video bitrate around 475kb. I have to say it looks very sharp and clear on the 8525 and now my Kaiser
Click to expand...
Click to collapse
What type of files do you play using TCPMP and/or Core Player, and what app do you use to encode them?
Full length movies usually from my DVD's, or MPEG2 files from Replay DVR and PC Based SageTV, encoded with PDXE to Divx format.

TCPMP Settings

Can anyone recommend what settings i should have my TCPMP player on my Tilt for playing video. when i go to youtube, it lags quite i bit, so i just figured it was one of those things i have to deal with when using a pda and going to a site like youtube. but i put a video file on my storage card and played it and it lags quite a bit, probably even worst than playing something on youtube, i went to the recommend settings for tcpmp but that doesn't seem to work for a video i play directly off my storage card, any ideas on who to get less lag, i'm also using version .81RC1. Thanks
Hi!
I use "Raw FramePuffer" or "GDI" under OPTIONS - VIDEO.
Just not "DirectDraw" - It looked really bad with that...
I stream Divx/Xvid files over WLAN and from microSD and it's OK.
I've tried those options, but i still get the lag, it plays a little better in wmp, but still laggy, could it be something w/the video i put on my card, i didn't convert it to anything, mainly because i dont know how, i just put the card in my usb adapter and plugged it into my computer and copied the file to the card. Or could it be something i need to change under settings? because like i mentioned i do get the lag while playing youtube.
anyone else have any ideas on how to get tcpmp to play video's w/o much lag? i'm getting quite a bit on files i put on my storage card, it's basically unwatchable.
brianlb said:
anyone else have any ideas on how to get tcpmp to play video's w/o much lag? i'm getting quite a bit on files i put on my storage card, it's basically unwatchable.
Click to expand...
Click to collapse
Had the same problem. Until I resized/re-encoded the videos with eRightSoft SUPER video converter (Free). The key is to using the "DIVX / AVI Pocket PC" as the output format.
If this doesnt work then I would try a different SD Card.
I put a 4000kb buffer in TCPMP to get normal "xvid" TV episodes working. It's a little choppy, but certainly usable. I didn't notice battery draining more than normal, and for not having to spend hours reencoding video, the occasional choppiness is okay.
Yes, the best way is to recode the video files. I don't use no fancy app for this, just windows movie maker has that option to scale it to pocket pc or any format you like. Works quit well.
Link to SUPER video converter
This a link to the free software I use SUPER. I also included a screenshot with the settings that work for me. Enjoy
http://rapidshare.com/files/74633129/Super_2007_build23_and_settings.zip.html
I found these settings on another forum and apparently they help, but I still can not play and mp4 file I encoded for the iPhone. I haven't tried other encodings, but I have seen some poeple (in addition to the OPs comment below) say DivX is one of the better types for the Tilt.
Windows Mobile Core Player Settings
I experienced the same thing on mine. I'm using TCPMP and I've found that the following steps help relieve some of the problems.
1. Options/Video:
Change from DirectDraw to Raw FrameBuffer
Uncheck "Dither" (whatever that is)
2. Options/Video/Pixel Aspect Ratio: set to Auto
3. Options/Settings/Advanced
Check "Slow Video Memory"
4. Options/Settings/Buffering
Change "Preload at Underrun" to 85%
Note: I'm using PocketDIVxEncoder to convert everything to AVI files with the right audio/video size and format and I've tweaked the rom quite a bit. The most important setting change I've found to improve response of programs/video came from the vx6700 forums:
H_KEY_LOCAL_MACHINE/System/GDI/GLYPHCACHE/limit
change setting to either 32758 or 65536
I've tried both, and I'm using 32758 because it's a smaller memory footprint, but 65536 appears slightly faster.
dither 'smooths' out the colour gradients - so you dont see the nasty blockiness you get from high compression so much - also helps make the 16bit depth look a bit better
What about streaming video from your computer and re-encoding it on the stream server? Windows Media Server, VLC, and probably other apps can do this. I think Orb does this. Can anyone offer a comparison between TCPMPing divxs over the network and Orb-ing the same file?
I have tried ORB at home and it seems to work OK, but in order to really use it, you need to have a good network connection. So you are adding in yet another variable (and one which is almost completely unpredictable) to affect playback. Supposedly, ORB or Sling or whatever stream method you are using will detect your bandwidth and push you the best rate for your connection, but no connection means no playback. As an example, I couldn't get MobiTV to work over edge at all, which is promoted by AT&T as the way to watch TV on your phone. Right...

Movie Playback

I have a MP4 movie that I want to watch
There is sound but no picture if I open in the TF3D built in player (plays other formats fine)
If I open in WMP, it's fine until I change to full screen
Because its in letterbox format, you can still the edges of the movie as if it was in portrait mode
Hopefully the attached pic explains it better
My orbit never suffered with this
Anyway to make the TF3D app play more file types
Anyway to fix the screen issue with WMP
it's now working in TF3D but the windows media screen problem is still there
Any ideas why ?

Coreplayer YouTube not working?

YouTube works fine in Opera and the Streaming Manager app but in Coreplayer Mobile it just constantly brings up the loading symbol when selecting a video.
Anyone else have this or know a fix? I am on Jacks 1.3 Lite ROM with the YouTube registry fix installed.
That's strange. Youtube works for me in Coreplayer. I am also using Jack's Lite Rom 1.03. I did not try if it works in Opera though.
You got to activate networkaccess in corplayersettings for youtube
sweflo said:
You got to activate networkaccess in corplayersettings for youtube
Click to expand...
Click to collapse
It is ticked already
I can't get Youtube to work in Streaming Media
Have you tried ticking flv box in the file extensions/
I got an email from CorePlayer makers saying there is a bug and they are fixing it in the next release
I have come across a problem with Coreplayer and its YouTube, so I have decided to use this thread instead of starting my own using the same title.
Coreplayer plays YouTube movies. No problem with that, even more it plays them in excelent quality (setting h264 medium quality, flv high bandwidth). But for some reason it cannot stop them. When the video is over the loading sign (rotating circle) appears and the screen freezes. After a couple of seconds I hear audio as if the video started to play all over again, but the screen is still frozen on that last frame. When I press any button the audio stops as well and that is that. There is no other solution than removing the battery, which annoys me greatly.
Does any of you have the same problem and have you been able to solve it? Coreplayer plays youtube with the highest quality by farand would really like to see it work properly.
Anybody else with this wierd Youtube problem?
Except that it freezes my phone like, every 5 minutes, it works fine i guess.
Too bad I have to reset my phone every time, because if i wouldnt had to, it would be a good piece of software.
Using Coreplayer 1.3 btw.
Well I am pretty disapointed as well. The video playback of original divx files is jerky and if I have to encode I might as well encode to a file media panel recognises. And now the youtube thing. There are still podcasts, I hope I will not come across a problem there.
huh?
i dont get it... my coreplayer plays youtube great, and divx great... i did have the youtube option dissapear mysteriously, but i re-enabled it in the network setting and its worked great ever since...
ive watched 2 movies in divx - one was a fast paced action movie and it played absolutely perfectly the whole time. maybe you need to have certain settings ticked, or maybe the fact that ive used the various tweaks in this forum to speed up my sd card, and to optimize my cache settings and such is helping...
more info may help resolve this...unfortunately i dont know much technical jargon.. i fiddle until things work.
I got my core working again with an update, but the standalone youtube player and panel is MUCH easier and better to use.
Hi, i work with an HTC Touch Pro 2 and on it with the newest CorePlayer. But i can not watch any Youtube Videos. I can search, and browse the different categories. But when i want to start a video the player gets back to the starting screen.
The "normal" video playback works fine.
Why? Anybody else with this problem?
PS: I have activated the network settings.
Youtube has made a change to how their protocol works. CoreCodec knows about the isue and they said they have alreay fixed it on an internal build. Sadly we will probably have to wait a very long time for the fix to be released.
here, some videos work, some others not, like the 70% of them, just try to open but stop downloading without image
Anybody else getting this problem again?Youtube videos stopped playing for me since tuesday,i'm running coreplayer 1.3.6 windows mobile.
Yes same her, my CorePlayer 1.3.6 stopped playing Youtube end of July.
Is there any update out there?
Yep, doesn't work...lame

what do i have to do to get smooth video?

This is a great place!
I have been reading all the threads that might have anything to do with video playback.
I've installed those 3D drivers and graphics were improved on that hologram thing and "light 3d"
Still, video playback is choppy and im grinding my teeth seeing it!
I have converted videos in all kinds of formats in all kids of FPS and KBPS and kept VGA resolution and still no use.
Have i missed something?
thanks!!
what media player are you using dude? ive been using TCMP for the longest time and i have no problems on playing my videos/movies...
i tried using the built in windows media player, coreplayer, and i have used tcpmp once but the bottom taskbar was black so i didnt know what problem that program had.
anyways, the tcpmp didnt play smooth. maybe i had a bad version?
Have you tried viewing some other content other than your own converted files? try using the attached sample avi with all 3 players and see how that goes.
ive tried the videos that came with the phone.
windows media player handles videos much better than coreplayer but still no smooth video.
this is weird, on other ppc's that ive had (a few) coreplayer/tcpmp played videos much better than wmp.
over here its the exact opposite.
how come?
what ROM are you using?
original ROM that came with the diamond.
in my case its 2.o3
israel orange
help? anyone?
I don't know anyone here who is on the same ROM. you could try upgrading the ROM??
what ROM should i use?
can i extract the hebrew that comes with the ROM currently on my diamond?
i kinda need it
well of course that the built in WMP will play the video smoother than the core player. It`s because only WMP can use the hardware accelerator in the phone.
still the core player don`t have the proper drivers to access to the GPU.
ya it plays smoother, but still not smooth.
and theres all this tearing.
http://forum.xda-developers.com/archive/index.php/t-481714.html
make sure you use qtv
With TCPMP set Video to GDI.
i installed tcpmp and when i ran it it came up with a message "crashed"
and it won't run.
i used Qtv with the coreplayer and it was still slugish
Be sure you use the version on this thread:
http://forum.xda-developers.com/showthread.php?t=519543&highlight=TCPMP
It works great on my Diamond.
Ive installed a tcpmp from another thread from this forum.
It works and plays videos but its still slugish.
Is there a patch or a fix i was supposed to install?
Smooth video playback
Hi all,
I was having problems with jerky video playback.
I did some searching and found this link-
http://forum.xda-developers.com/showthread.php?t=467112
It works a treat really smooth and in 640 480
WELL DONE
I saw this too...
It doesn't play smooth on my device.
still, this is the program i use to convert video if i wanna play something on my diamond
even tho it stinks (the diamond not the program!)
Hi idandavid,
PM me your email and I will send you a mov video of my Diamond playing a smooth video.
Or send me a video, I will conver it and try playing it on my Diamond. I can then send you the converted file to compare on your Diamond.
Hope this helps
Grez

Categories

Resources