How do you change the Attachment size setting under MMS/SMS options? I used to be able to take and send large video files via MMS/SMS or I could simply go to my video folder and select menu and send whatever video I wanted and it would load it in to the MMS and I could send it. Now, if I send anything over 5 seconds, I get the file attachment too large blah blah, etc.
Is there a way to change this setting to say 5mb or at least like 1mb? In case you are wondering or may not know me (I'm new), I do not post questions haphazardly. I spent approximately 16 hours Wednesday and Thursday looking for a fix. I have installed the ATT MMS settings cab, the ATT Media v2 settings cab. I have changed everything I can think of and still, that damn 300k size setting is keeping me from sending anything over that size. I know it was larger before. It’s got to be something so easy that I am overlooking or I am just making it more complicated than it has to be.
If there is a post which CORRECTLY addresses this, please let me know.
~Gwen
google is your friend gwen
http://www.google.com/cse?cx=000825...limit&sa=Search&cof=FORID:0&ie=utf-8&oe=utf-8
Here's a Reg Hack to make it work.
MMS size to 1MB
Thanks to over2land
\HKLM\Software\ARcsoft\ArcSoft MMS UA\ Config\UI\Size Limit
change this size limit to 1024000
now you should be able to send up to 1MB over MMS.
Click to expand...
Click to collapse
Now I personally found a bunch of Send Keys.... Like 6 if i remember. I just changed them all. Copy/Paste is your friend.
Missed it by THAT much
You're RIGHT!! I'm not sure how I missed it.
You know. You go and go and go sometimes and then go some more and then when you're tired and worn out from the process, you discover a bomb of a resource, cutting the time in half and increasing efficiency and you go some more. It is these types of finds that can rejuvenate a person and coupled with a newfound revelation, most humans will set off yet once again incorporating what they've learned from the previous process. I am realizing that it may very well be this way until you reach some form of continuity and understanding with whatever you start. Back and fourth-trial and error-
Literally, after I posted, I found the Google search for XDA and it is the Bentley of searches where this forum is concerned. BOO-YA!
THANKS!!!!!
~Gwen
Just remember it doesn't matter how big a file you can send if the recepient can't receive such a large file!
Also I believe the AT$T network limit is 600K so yeah if you do the Reg Hack you can put it over 600K but I doubt it will do any good.
MMS size to 1MB
Thanks to over2land
\HKLM\Software\ARcsoft\ArcSoft MMS UA\ Config\UI\Size Limit
change this size limit to 1024000
now you should be able to send up to 1MB over MMS.
Click to expand...
Click to collapse
Changing that registry wont work. MMS is still limited to 600kb
You also need to change the size in
\HKLM\Software\ARcsoft\ArcSoft MMS UA\ Config\mm1\MMSCsetting\samplemmsc
to 1024000
Once you've done that, you can attach pics,audio up to 1mb.
The reg hack allows you to attach up to 1mb and attempt to send it. The problem is ATT's network wont allow you to send such large MMS. You get a notification "Request Entity Too Large"
Disappointing. I installed the cab that changed the Resize limit on MMS, but its really pointless because the network still limits how much you can send.
Wish there was a way around it. Whats the use of using a higher resolution when you cant send the pics/videos?
I have installed the cab files on my unlocked Fuze. For some reason, my settings are limited to 1 kb. Hae tried to change, but there are no options to choose for send limits. Is anyone else having this problem too??
Thrlskr said:
I have installed the cab files on my unlocked Fuze. For some reason, my settings are limited to 1 kb. Hae tried to change, but there are no options to choose for send limits. Is anyone else having this problem too??
Click to expand...
Click to collapse
I have a Fuze with 'EnergyRom' 'Phoenix 2' "Standard" I was having the same trouble. I tried the 2 Reg edits on this thread and they didn't work alone. I also had to:
change "SendDefalut" to 1024000 as well as "Configurable" to 102400 on:
\HKLM\Software\ARcsoft\ArcSoft MMS UA\ Config\mm1\MMSCsetting\samplemmsc
worked perfect even on my tilt 2 thanks again
Related
I can't believe that the limit for sending MMS messages on the MDA is only 5 seconds! My girl friend has a 100 dollar el-cheapo and she can send 20 seconds. Is there a way to increase the file size that you can send for MMS messages?
I'm not sure, but I'd guess the limit is based on the 100kB size limit for MMS messages. Have you tried reducing the quality of the video recording to make the file smaller?
Andre
Solution to the :05 Second Video Messaging Limit?
Has anyone got around the 80KB limit on Video messaging on the MDA? I have a frined with a Motorola v360 and she sent me a file that was 584 KB!!! I also called T-Mobile and they told me that It was the phones limitations and not any limit that they had set. Do any of you have a hack for this yet? Thanks, Vern.
Check this out
Have a look here I thought my friends send long video to me so wanted to change MMS video limit.
It worked but all I can send on Orange is 100k so it was pointless..
http://forum.xda-developers.com/viewtopic.php?t=41986&highlight=mms+video
Check it out though I hope it helps
A guy going under the name Jonazen sent me a reply to this question at Howardforums.com saying that I should try the following in order to increase the Video messaging feature on the MDA, but it's way above anything that I'm conftorable trying. Have any of you with more experience tried anything like this or are any of you capable of sending me the step by step procedure to trying this out? Thanks.
Well...if you're in an experimenting kinda mood... I just took a quick scan of the registry on my MDA, and found a key that appears to be related to this issue. It, and the associated values stored under it, currently look like the following:
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\UI\SizeLimit]
"SendCount"=dword:00000001
"SendLimit1"=dword:000493E0
"SendLimit2"=dword:00032000
"SendLimit3"=dword:0003E800
If you convert the hex in SendLimit1 to decimal, you'll find that is comes to 300,000, which is very close to 292k (1024 x 292 equals 299,008 bytes).
SendLimit2 is hex for 204,800 decimal, and SendLimit3 is hex for 256,000 decimal.
Not sure what the Limit2 and Limit3 refer to, but I'd guess that SendLimit1 is the one that you see reflected in the MMS config, and may well be the value that is limiting your MMS size. On the other hand, it would be pretty sloppy of MS and T-Mobile to make it that easy for you to change the limit. It's possible that, while SendLimit1 shows you the size limit, it may NOT in fact be something that you can modify to change the limit. It may be read from another part of storage somewhere. Might be worth a try, though, if you're feeling adventurous.
hello
i edited the registry settings that you identified and to begin with i only had 100kb limit when sending mms but i then doubled the values in decimal and the option changed to 200kb limit.
i did change all 3 valus and have just sent a 9 secs mms video and it sent it without any problems.
i also tried a 30 sec audio track and it worked!!
hope it helps
andrewilley said:
I'm not sure, but I'd guess the limit is based on the 100kB size limit for MMS messages. Have you tried reducing the quality of the video recording to make the file smaller?
Andre
Click to expand...
Click to collapse
i have the vario on t-mob and have successfully sent mms over 100kb limit... i don't know why the settings are set to 100k.... :roll:
i've sent 200kb files no probs
Beautiful
I'll have to try and do this because that limitation is killing me. Thank You, very much everyone. Peace, Vern.
SendLimit1,2 & 3 are the 3 values you get in the Limit dropdown in MMS settings.
However, whenever I select the MMS Video option on the camera, it only seems to let me record about 3-6 seconds (looks like a 75K limit on the camera, even though it's saving to SD). Any ideas how to extend this?
Ta
Timewarp said:
SendLimit1,2 & 3 are the 3 values you get in the Limit dropdown in MMS settings.
However, whenever I select the MMS Video option on the camera, it only seems to let me record about 3-6 seconds (looks like a 75K limit on the camera, even though it's saving to SD). Any ideas how to extend this?
Ta
Click to expand...
Click to collapse
i remember seeing an optopn in the camera settings allowing a 'limit' on the recording time. is this limit enabled for you??
MMS video length is limited by Size, not time. Do a search around the forums, there's plenty of threads on the topic. Here is one that contains the registry key to increase the size lmit. BUt just keep in mind that some MMS providers might not allow MMS bigger than 100k, so you might send it, but the receiver may not receive it.
http://forum.xda-developers.com/viewtopic.php?t=41986&highlight=mms+video+limit
Still couldn't figure this one out. Can anybody help?
When I recieve MMS (text message pictures) they are really small, no matter who it is sent from.
Is there a setting that can be changed, or a way to fix it so that the pictures come out larger?
Thanks.
Have you found a fix to this issue? I'm having the same problem, and it seems to have come out of nowhere...
I even did a hard reset of my device to try and fix it, but I'm still having the same issue. My girlfriend will send me 2mp pictures, but they all show up on my phone stamp-sized.
What the hell!!!
I haven't had the issue happen with me, but I read about it yesterday before I read your thread.
http://consumerist.com/351639/att-m...ced-without-explanation-if-theyre-sent-at-all
That really sucks! I'm going to give t-mobile a phone call tomorrow and see what the deal is. I have $500 phone with a nice big screen, and all the pictures look like stamps. It's a shame.
yep...i got the same issue
anyone have a solution?
THe solution is to change a value in the WSPHeader of the registry for Arcsoft
HKEY_LOCAL_MACHINE\Software\Arcsoft\ArcSoft MMS UA\Config\mm1\WspHeader
"Accept"="application/vnd.wap.mms-message;*/*"
"Profile"="http://www.htcmms.com.tw/gen/wizard-2.0.xml"
"x-wap-profile"="http://www.htcmms.com.tw/gen/wizard-2.0.xml"
"User-Agent"="Xda Mini S/arcsoft-mmsua-3.0.0.xx"
Try those values, they worked for me on O2 but what you really need to do is find out what those vaules are set to on the ROM as it came from your provider, as the settings to make tmobile work may be diff for O2 or from VOdafone etc. (note the XDA MINI S bit, that is the O2 name for the WIzard, on other networks it has a diff name)
What those settings do is tell the phone company what type of handset you have, and therefore what capabilities it has and how big an MMS it can receive. If your settings are a phone that your provider doesnt recognise, it makes the MMS small so that it will work for definate.
Hope this helps
that works, thanks! I asked the herald for help too because i'm on the t-mobile US network and I wanted something that they could register. I was given a cab file with those settings, except it didn't have the x-wap set, so i did that myself.
If you're lazy like me, here's a link to the thread with the cab file....
http://forum.xda-developers.com/showthread.php?p=2085747&posted=1#post2085747
just make sure to change the x-wap
http://forum.xda-developers.com/showpost.php?p=1897952&postcount=70
Detailed Idea of the Problem and the Solution.
help
I would like to be taken through how I might do what is described below? I would like to increase picture size on my mobile. I am with O2... but I don't understand this... please help?
SayWhat said:
THe solution is to change a value in the WSPHeader of the registry for Arcsoft
HKEY_LOCAL_MACHINE\Software\Arcsoft\ArcSoft MMS UA\Config\mm1\WspHeader
"Accept"="application/vnd.wap.mms-message;*/*"
"Profile"="http://www.htcmms.com.tw/gen/wizard-2.0.xml"
"x-wap-profile"="http://www.htcmms.com.tw/gen/wizard-2.0.xml"
"User-Agent"="Xda Mini S/arcsoft-mmsua-3.0.0.xx"
Try those values, they worked for me on O2 but what you really need to do is find out what those vaules are set to on the ROM as it came from your provider, as the settings to make tmobile work may be diff for O2 or from VOdafone etc. (note the XDA MINI S bit, that is the O2 name for the WIzard, on other networks it has a diff name)
What those settings do is tell the phone company what type of handset you have, and therefore what capabilities it has and how big an MMS it can receive. If your settings are a phone that your provider doesnt recognise, it makes the MMS small so that it will work for definate.
Hope this helps
Click to expand...
Click to collapse
duh i cant even recieve mms. it says "can not recieve mms in usb drive mode" even though its not.....and it should. any ideas? im getting ready to send my diamond to "will it blend"
Just sorted this out, and lo and behold, MMS is working fine after a restart!!! WOOOHOOO
I just used a reg editor and searched for
profile (finds x-wap-profile) in the same string and you change from the arcsoft bumf it has there to these.
NokiaN95/11.0.026; Series60/3.1 Profile/MIDP-2.0 Configuration/CLDC-1.1
http://nds1.nds.nokia.com/uaprof/NN95-1r100.xml
Brill
When I receive a mms picture message, the picture always comes out extra small then it should be. Is there anyway to fix the dimension size and get the MMS picture view in full size?
tangswomen said:
When I receive a mms picture message, the picture always comes out extra small then it should be. Is there anyway to fix the dimension size and get the MMS picture view in full size?
Click to expand...
Click to collapse
I think it must depend on the size of the picture you've been sent - as mine have always been full screen. Bear in mind that the Diamond has a VGA (640x480) screen and most phones send MMS pics at a lesser resolution.
The way to view full screen is to open the MMS pic, click 'Contents' which will then let you see text01.txt and Image001.jpg (or similar) which are the parts of the message. If you hold your finger / stylus on Image001.jpg then you get an option to Save. If you save the file then it gets saved in My Pictures and is viewable in the TouchFlo Photos and Videos... which means you can zoom in using the scrollwheel.
Your operator can also cut down the size to save traffic. It's done on the mmsc server, I believe.
I am also experiencing this problem, The Pics are only coming in at 4k, and when saved as suggested by p3eps It won't let me zoom in. Pics are about the size of a finger nail on the screen which just isn't good enough!
I am going to phone o2 to see if they are restricting something but I am on a unlimited data package so I don't see why they would.
If anyone else has any thoughts would appreciat it!
Rich
tangswomen said:
When I receive a mms picture message, the picture always comes out extra small then it should be. Is there anyway to fix the dimension size and get the MMS picture view in full size?
Click to expand...
Click to collapse
I've experienced the same problem with my original Orange ROM.
Since I've flashed my Diamond with the original HTC ROM I am able again to receive MMS picture in their original size and not in thumbnail mode !!!
But I've experienced this problem with other HTC models. I think it's a problem with the ROM install. A hard reset could fix the problem. Perhaps.
O2 in the UK do this, if the network doesn't recognise your phone it automatically downsizes the picture. I had this problem with my htc s710. I had to edit some registry setting to make the o2 network think my phone was an xda and it worked.
I cant find the post i found it in, but in sure if was under the networking folder on this forum.
huwwatkins said:
O2 in the UK do this, if the network doesn't recognise your phone it automatically downsizes the picture. I had this problem with my htc s710. I had to edit some registry setting to make the o2 network think my phone was an xda and it worked.
I cant find the post i found it in, but in sure if was under the networking folder on this forum.
Click to expand...
Click to collapse
Top Man thats sounds like the problem!!! Only thing is I have no Idea when it comes to registry editing!
I've got a O2 Diamond and every time I get an MMS message the
picture is really small,
I found a cab that was supposed to correct it but it didnt do anything,
I then found a Reg hack to make O2 think it was an XDA Mini,
this has helped a bit (picture is a bigger) but its still not right,
anybody know how I can sort this out
Hi i have my Touch Diamond on o2 if you need any more settings or anything give us a shout
this isnt my work someone from here emailed me it
Basically O2 doesn't recognise your phone, so when someone sends you an MMS, it downsizes it to be on the safe side to make sure it's compatible with your device. Of course, this assumes that whoever sent the pic did so in, say, QVGA or VGA size in the first place ; )
As I've only had HTC WinMo devices to date, I'm not sure what MMS software your phone will have installed. If it's Arcsoft, then I think I can help. If not, I'm wasting your time. Oops.
To get around the problem there are a couple of reg entries to change which 'fool' O2 into thinking your handset is one that the network recognises, e.g. a Nokia N95 (just wheres MMS is concerned).
So, fire up your fav reg editor and browse to:
1. HKLM\Software\Arcsoft\Arcsoft MMS UA\Config\MM1\WspHeader\User-Agent
Change the value of User-Agent to:
"NokiaN95/11.0.026; Series60/3.1 Profile/MIDP-2.0 Configuration/CLDC-1.1" (no quotation marks)
2. HKLM\Software\Arcsoft\Arcsoft MMS UA\Config\MM1\WspHeader\x-wap-profile:
Change the value of x-wap-profile to:
"http://nds1.nds.nokia.com/uaprof/NN95-1r100.xml" (no quotations marks)
To test, send yourself an MMS : )
Just tried them settings and picture is just the same size as I was getting using
the XDA Mini settings,
but It'll do , at least I can see them now
are you on o2 contract or pay and go i have the settings pay and go and they come through big on my phone mate
Contract m8
having same probs
im having same probs with mms being so tiny im on o2 contract. I called htc and he didnt really have a clue, he just said a bit of 'erm i dont know', eventually i rang o2 and the woman said its to do with resolution sizes between my mobile and the person sending, its a load of cr*p cos i sent one to myself and its the same.
I cant seem to get any reg editors to work and i dont really understand alot of what people are saying, sorry im into my gadgets and stuff and spend loadsa time on lap top but this one has got me a bit stuck. Hope someone can help me Thanks guys
Download and install Total Commander,
this will allow you to edit your registry
and just use the settings in post 2
So ive found a issue thats driving me insane, the MMS pictures I sent and recieve are small, like alot smaller than the actually picture that was sent. I installed the "MMS size increase" cab and still nothing, ideas?
My friend is half way across the world visting japans and when he sends me pics theres so frickin small! Can anyone help me fix this plz!
Dragonmaster0430 said:
So ive found a issue thats driving me insane, the MMS pictures I sent and recieve are small, like alot smaller than the actually picture that was sent. I installed the "MMS size increase" cab and still nothing, ideas?
My friend is half way across the world visting japans and when he sends me pics theres so frickin small! Can anyone help me fix this plz!
Click to expand...
Click to collapse
anyone? i much appriacte the help!
Dragonmaster0430 said:
So ive found a issue thats driving me insane, the MMS pictures I sent and recieve are small, like alot smaller than the actually picture that was sent. I installed the "MMS size increase" cab and still nothing, ideas?
My friend is half way across the world visting japans and when he sends me pics theres so frickin small! Can anyone help me fix this plz!
Click to expand...
Click to collapse
Send Large MMS:
Registry: HKLM\Software\Arcsoft\ArcSoft MMS UA\Config\UI\Size Limit
Key: wap2sendlimit1 (you can also change wap1sendlimit1)
Default: 307200
New Value: 1228800 (1200K)
Doo Doo said:
Send Large MMS:
Registry: HKLM\Software\Arcsoft\ArcSoft MMS UA\Config\UI\Size Limit
Key: wap2sendlimit1 (you can also change wap1sendlimit1)
Default: 307200
New Value: 1228800 (1200K)
Click to expand...
Click to collapse
Will that work with receiving too?
Actually I just looked and I cant seem to find the "arcsoft" folder in the "software" folder...
Dragonmaster0430 said:
Will that work with receiving too?
Actually I just looked and I cant seem to find the "arcsoft" folder in the "software" folder...
Click to expand...
Click to collapse
try this --> http://forum.xda-developers.com/showpost.php?p=4908688&postcount=19
No luck I editted those in the link and nothing, I still can't find the first mentioned...
anyone?
I dont have an issue on mine @sizes...Did you set the settings correctly? If you haven't... Open the messaging program,click menu,settings,options then menu again,mms server,then click AT&T MMS, message size limit should be @600....
Regards,
WC
Ya everything is set right. Every pic I send and recieve look like this.
unsure what to tell you....picture sizing is controlled by server side from my understanding....what resolution are you taking pictures @camera....just curious....
3M why?.....
Has anyone figured out anything for this yet? Plz say yes