Related
Hello,
I have a Htc Mteor and I would like to know a list of important programs for this.
Thanks
1. ActiveSync
Yeah, I have ActiveSync and Real Mail.
I posted in another thread because I have some problems. Have you got a Breeze?? My htc mteor doesn't have a frontal camera, only back camera of 1,3 Mpxl. But is 3G.
someone know a rom version like is in this video for HTC P3600? thanks
http://www.youtube.com/watch?v=UMpZ0DkU-aE&mode=related&search=
Hi Marius -
You are looking at two different pieces of software on that phone.
The first one is the HTC Home screen for the TyTNII, which HAS been copied over to the Trinity. You can tell if that is the home screen used in the ROM because it will usually be shown as HTC Home Kaiser or something similar. You can also install this using a standalone CAB file. Search the board to find the cab, it's in the Trinity WM6 portion of the board.
The second one is a piece of software called Touchflo. The real Touchflo software requires that the touchscreen hardware be the same as the Kaiser or the HTC Touch. Those two phones use different touchscreen hardware (physical chips and the digitizer screen) than the Trinity. So, no one has been successful using the real Touchflo software on the Trinity, and probably never will.
However, there have been some attempts to get the same functions from other software. I've seen something called alphatouchflo, and there are other packages. Note that they do not have all of the same functionality. For example, I haven't seen any of them that could allow use f the scrolling feature to replace sidebar scrolling. I've only seen good scrolling of a third-party contacts list (see PocketCM as an example). This software is also available in a standalone CAB file if you like.
There is a thread devoted explicitly to using Touch Flo on the Trinity in the WM 6 section. If you take a minute or two you can easily find it.
Good luck!
Mike
yes... but i`m looking for rom. the rom have htc home screen instaled in it.
and in this video the scrolling works perfect... i read on the htc p3600 this "tochflo" have some problems. but on other devices these cooked rom with "touchflo" work good. i still looking and waiting for a good rom wm6(not a aplication "touchflo"). now i have wm5.
mariusY said:
yes... but i`m looking for rom. the rom have htc home screen instaled in it.
and in this video the scrolling works perfect... i read on the htc p3600 this "tochflo" have some problems. but on other devices these cooked rom with "touchflo" work good. i still looking and waiting for a good rom wm6(not a aplication "touchflo"). now i have wm5.
Click to expand...
Click to collapse
Hi Marius -
The other devices that use Touchflo have different hardware which is why the Touchflo works for them. The device shown in the video is the HTC Prophet series, which uses the same touch screen as the Kaiser/TyTN II (which is different form the Trinity). You will not find any software or ROMs that can run the Touchflo software on the Trinity. As far as CAB software compared to a ROM, the only difference is in the method of installing. It doesn't matter if you install the software using a CAB file or if it is already included in a ROM, except that you can remove software installed using a CAB if you don't like it.
I suggest you continue watching the thread about Touchflo on the Trinity in the WM6 folder. That thread contains the most current information about using Touchflo on the Trinity.
Mike
Mike
ok.. thanks for informations
Hy Guys,
I used a GPS Software for Smartphone name NAVIGON Mob. Nav. 6.5 on my HTC S620 => it works without problems
This GPS Software is ok with HTC S710 but not yet with S730 (as this device is brand new)..
I've tryed the combination (HTCS730 - MN 6.5) : it works for fast research (proximities like gas pump or restaurant) but its goes down with classical researchs (too long) => the program stop !
My problem is with memory on this device HTC S730
I've maximum 17 000 to 18 000 Kb free at the best moments.. and I've installed no other software..
I've done a advanced test of my RAM thats shows that some files (hidden files) took much memory.. (like video telephony, listening ports) but I don't want to use it.. (I would prefer to hide them in order to make my GPS soft work )
So who can tell me how to dismantle some WM6 files/process in order to win some KB for my GPS ?
Thanks in advance for your help
Jeff from Belgium
HTC S730
Navigon Mobile Navigator 6.5. (for Smartphones)
External GPS Module LEADTEK Bluetooth
Carkit Parrot Minikit 3.1
there is a wiki on that. go read it man
ok. Thanks for that answer. The second question would be, where to find this wiki?
SamuelTee said:
ok. Thanks for that answer. The second question would be, where to find this wiki?
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=Windows_Mobile_6_Standard
I am looking for Mobile navigator 6.5 for Smartphone all over the internet. I have latest maps, but I can't find software for my S710. Could you share?
thanks
Hello,
Go to HTC CLUB :
07/03/2008
Hot fix for TyTN II photo quality issue
If you zoom in on a captured photo and notice grainy, maze-like patterns within the image itself (this problem is caused by too much sharpness enhancement being applied in bright-light environments), please download and install this hot fix to solve the problem. Sharpness parameters within the photo will then be reduced with only a minimal loss of image sharpness.
enjoy
http://forum.xda-developers.com/showthread.php?t=375100
Lol, not working both links are down.
HTC Europe: http://member.htc.com/downloadfiles/Driver/HTC TyTN II/Hot fix for TyTN II photo quality issue
HTC USA: http://216.139.227.230/download/Driver/HTC TyTN II/Hot fix for TyTN II photo quality issue
Something's messed up in their form - after assorted messing around with addresses I hit the jackpot with this:
http://member.htc.com/downloadfiles/Driver/HTC TyTN II/TyTNII_Photo Quality.CAB
Resulting in the CAB file attached -
Boinng said:
Something's messed up in their form - after assorted messing around with addresses I hit the jackpot with this:
http://member.htc.com/downloadfiles/Driver/HTC TyTN II/TyTNII_Photo Quality.CAB
Resulting in the CAB file attached -
Click to expand...
Click to collapse
Thank you Boinng !
It works fine for me... The quality seems better but I will test it later...
thank you for the fix cab
because in the www.HTC.com, there is big problem connexion with the FTP
installed in UK MDA Vario 3 running Duttys 6.1 ROM and not noticed much, if any inprovement in quality. No negative effects tho so will keep testing.
thanks
Placebo
If HTC would be in pharmacy and drugs, i would call it a "Placebo".
# of pixels per pic similar as before fix though. No granular difference even with a x20 zoom enlarging soft.
Taken with same position - same light
Downside:
Application starts slower and focus takes longer.
Tested on Alex's 5.2 Home.
I took 2 pictures from the same object - one before installing the cab, and one after installing the cab.
Result: can't see any improvement too
lowf said:
I took 2 pictures from the same object - one before installing the cab, and one after installing the cab.
Result: can't see any improvement too
Click to expand...
Click to collapse
There IS a definite improvement. The 'Zoom' which HTC refers to is not the camera zoom when taking, but the post viewing on a PC or in the album app. I used to have this horrible 'hatching' type effect when shooting on 3mp especially in the sky. It was very noticable on cloudy days. This has now disappeared.
Worthwhile fix in my book.
Rgds
Stuart
This might just be an updated Camera application that most of us have already gotten thanks to Nadavi.
It's not a new app, just a couple of new, replacement DLLs. It seems to do what the description says it does - it gets rid of the herringbone pattern that sometimes appeared in the grain of pictures in certain lighting situations. The pattern was only ever seen when pictures were blown up.
It's not a magic fix for everything else people dislike about the camera app, but it's worth installing.
according to Alex on this dup thread,
http://forum.xda-developers.com/showthread.php?t=375100&page=3
It is newer then what polaris camera tossed in, thats if they did toss in anything. both DLLs were newer when I overwrite in my windows folder using totalcmd. Try dragging the pictures to a computer with a good monitor and start zooming in. Maybe if someone can experiment in a zoom in test with old driver to new drivers.
thomassster said:
according to Alex on this dup thread,
http://forum.xda-developers.com/showthread.php?t=375100&page=3
It is newer then what polaris camera tossed in, thats if they did toss in anything. both DLLs were newer when I overwrite in my windows folder using totalcmd. Try dragging the pictures to a computer with a good monitor and start zooming in. Maybe if someone can experiment in a zoom in test with old driver to new drivers.
Click to expand...
Click to collapse
If you're manually installing the DLLs, ModuleID.dll isn't required. It's used in the cab install/uninstall process. Updated the duplicate thread for clarity about ModuleID.DLL too.
Is there a way that you could post the cab itself? I have a Tilt and HTC eclub won't let me get the file. Thanks
Esse Hotfix é compativel no WM6 em Portugues??
Obrigado
Tynt II Camera fix with error
Hi ~
I´ve installed it and, since this day, my camera doen´t show the image that I want to capture.
The screen appears black all the time, with options and grid andetc.
I need help to correct this issue.
tks.
celsosalomone said:
Hi ~
I´ve installed it and, since this day, my camera doen´t show the image that I want to capture.
The screen appears black all the time, with options and grid andetc.
I need help to correct this issue.
tks.
Click to expand...
Click to collapse
This is a year old update.....If you had a wm 6.1 rom before installing it then most likely the update was included in it.
I have a problem here. After i install this hot fix, my camera goes blank! I cant see any but when i click the button its capturing. Can someone help me here? I'm using HTC Tytn II with WM 6.1. Thanks
Offar said:
I have a problem here. After i install this hot fix, my camera goes blank! I cant see any but when i click the button its capturing. Can someone help me here? I'm using HTC Tytn II with WM 6.1. Thanks
Click to expand...
Click to collapse
its for 6.0 , just uninstall it from remove programs and it will fix ur camera back.
bwnotredame06 said:
its for 6.0 , just uninstall it from remove programs and it will fix ur camera back.
Click to expand...
Click to collapse
Thanks a lot my friend.. truly appreciate it! Its works now!
Hi to all,i'm looking for a qwerty-keyboard phone for my gf,and i can't afford umts Blackberry (she has h3g sim),is this phone a good choice,even if it's really old?
I've found it for 90 €,it seems good to me,but i don't want to buy a too slow device.
I'm used to HTC Diamond,which has slightly better hardware but suffers using 3d manila and stuff "overrated" for its hw (despite the claims they sold it with in the past ).
Is Tytn II still good for 2d stuff and normal everyday usage?
I even see it has a dedicated android section,so maybe its better than diamond at handling it,this would be sweet too
Let me know,thanks for help
The build quility is superb, an incredible bit of engineering.
Graphics can be slow for heavy gamers or GPS applications. I really liked mine, only moved on as had it stolen.
I was on a 6.1 standard ROM & it ran very well for all basic phone tasks such as emailing sms/mms ect & handling office docs was good too.
I used it as a modem for notebook internet too. Wifi & BT worked ok & keyboard plus d-pad were nice in function.
Only downside is the weight of the device but for the price today it is incredible value for money, you will only find a few devices that feel such quality in build.
The tilt screen is very cool & they do look good sat on a desk in full tilt.
If she likes the look of it get it, plenty of tweaks & support for the Kaiser so should still be a fun device.
Not so good that it suffers gps apps,but i guess its normal...
And is it good to use limiting touchscreen inputs (she hates touchscreen )?
I mean,except for opening start menu,is it usable with hardware buttons,more than touch?
Yes it is very good in terms of button function.
I improved button function by using mortscripts that would change button function pending on active window & reg keys such as headphones connected, active sync connect ect.
Even the screen is quite good when you need to use it.
Touchscreens are over rated in usability, the touch diamond 2 would of been fantastic if it had a small joy stick d-pad in the centre under buttons but no you have to struggle with that ****e zoom bar touch panel which only has movement in 2 directions.
Tactile feel of buttons can never be replaced by a screen period.
I could do functions on my Kaiser without looking at it as buttons could act like brale.
The slow graphic issue didn't seem that bad to me, I used mapking & Garmin with no issues & played games such as Duke Nukem without issues.
I'm on a touch pro at the moment, I like it but miss the solid build of the Kaiser, it feels unbreakable ...
You could also look at the HTC S710 !
Just bought for my gf...its ****ing awesome,compared to my plastic-breaking-with-breath diamond :asd:
Just waiting to learn how to unlock
Speaking about cooked rom,any suggestion about a speedy rom (not necessarily manila,it just should be "handy to use" and light)?
And should i try android (aka is it fast and functional enough?)
Thanks everybody
edit: oh,and how can i check if it has hardspl installed already?
I was on latest standard rom with graphics driver from HTCCA.
I would start off on a standard ROM unless you spot an interesting custom ROM which has solid feedback.
To view HardSPL version go to bootloader mode:
-Enter Bootloader mode: Hold Camera + Power buttons together and reset with stylus
(exit bootloader by pressing soft reset button)
-HardReset: Hold Talk and End soft key - Reset :When prompted push Green Talk Button
This is the unlock tools I used: (Not sure if supports 3 network !)
http://forum.xda-developers.com/showpost.php?p=3432892&postcount=10
Thanks Mister B,we are on stock 6.1 rom too...and i'd like to install graphics driver,can i do it without any risk?and where can i take them from?
°Dexter° said:
Thanks Mister B,we are on stock 6.1 rom too...and i'd like to install graphics driver,can i do it without any risk?and where can i take them from?
Click to expand...
Click to collapse
Go to the ROM development section, read through the FAQ links. That will give you some basic ideas what is available, etc.
If you want great batt life with plenty of memory, use WM 6.1, not 6.5 ..
To know which ROM is best, read through the last pages (10 - 20)of each thread, the feedback from the users will give you overall view. Why I suggested 10-20, because for old ROM that chef has left, recent posts are usually useless, repeating old questions again and again.
°Dexter° said:
Thanks Mister B,we are on stock 6.1 rom too...and i'd like to install graphics driver,can i do it without any risk?and where can i take them from?
Click to expand...
Click to collapse
Link below:
http://www.htcclassaction.org/download/HTC-CA-Kaiser-Drivers.cab
It is un-installable & should be no problem.
Make sure that stock 6.1 is the latest release. I can dig out a serial if you require ROM downloading direct from htc website.
how can i find if it's the latest release (i thought there was just one)?
I should have a serial number on mine too,for downloading,or am i missing something?
Thanks for all your help,anyway
@anagarika:wm 6.1 is for sure, even my diamond suffers from 6.5
ps:i entered bootloader,it says SPL 3.29,i guess it's still the original one
Latest HTC generic ROM is:
HTC TyTN II_RUU_Kaiser_HTC_WWE_3.28.405.0_radio_sign_25.83.40.02_1.65.17.56_Ship.exe
You can see ROM version in Settings device information.
If your device is branded your serial will not work with HTC website, so you will need a serial of a generic HTC kaiser ;-)
Your SPL is original. Installing the hardSPL is easy & unlocking can be quite straight forward but may require downgrading to wm6 ROM to unlock & then upgrading to a 6.1 rom of your choice.
My rom is 3.29.408.o ITA,other stuff is lke you posted...i guess it's the latest one then
Newest Italian is:
_HTC TyTN II_WM6.1_MR2_RUU_Kaiser_HTC_ITA_3.29.408.0_radio_sign_25.83.40.02_1.65.17.56_Ship.zip
So looks like your on newest ROM.
I already had d3d drivers ("previous version will be uninstalled")...all these concerns for nothing
Anyway i installed spb mobile shell 3.5,themed,and it's a good mid-point between eyecandy and memory usage...
I only have some hang-ups when i make some operations too fast (e.g. i open and reclose very fast an app),making me have to reboot the phone...but it only happens sometimes,and i guess it's related to mobile shell
I tried to install updated camera app yesterday (nadavi 5.xx) but then camera screen turned black,so i uninstalled.
I installed htc album too,but its menus are blank (i can select them with left and right keys,but nothing's written down)...do you know which version of these packages works for sure?
edit:i fixed camera problem,but album issue is still there,although i tried two different versions
Mmm don't know which HTC album viewer is your best option, I used Resco Photo viewer Pro as far surpases the HTC app.
Tried it,perfect program
Thanks a lot (i think there's no way to oc the cpu a little,right?)
Nope, just don't use CPU & graphic heavy software. Mine run sweet & was very usable.