just a quick question... - Tilt, TyTN II, MDA Vario III General

have any of you seen a "data" tab under phone settings? (it terminates any active internet connection when the phone goes into standby.) i had it with one of dutty's older roms but on his two newest roms that "data" tab is not there anymore. do any of you guys know a registry tweak or a program that would bring that tab back? my phone just drains the battery when its connected to the internet without me knowing (to receive email.) i have searched for it on google and all over the wiki but i haven't had any luck with how to enable it. thanks in advanced for your response.

look on the forum for modaco nodata cab
it lets you toggle the available connections

texarcana said:
look on the forum for modaco nodata cab
it lets you toggle the available connections
Click to expand...
Click to collapse
thanks for your help but i found what i was looking for i searched the registry of one on of the roms that had it active and just copy the registry name and value. here it is how to do it in case you are interested: Search for "PhoneSetting" on any registry editor and if the key "ShowPDPPage" is not there add it on as a DWord and set the value to 1. then using the Advanced Config tool scroll all the way until you see GPRS auto attach (under Data Connections) and set it to Disable, if its not disabled the connection will not disconnect even when the phone goes into standby mode.

Related

"Show Wireless" Today item and Time sync page

I was perusing thru this list of WM5 hacks:
http://wiki.xda-developers.com/index.php?pagename=WM5_Tweaks_Other
and noticed the two at the bottom of the page regarding adding a Wireless status line to your Today screen (bluetooth on/off, wireless on/off as well as wireless network name) and also being able to set your phone to auto-sync the time (handy when traveling). Both hacks worked for me, seem to work real well. I'm sure there is a today plug-in that is similar but this seems to be built-in to WM5.
I'm using the T-Mobile customized 2.17 ROM for Qteks.
AKU2 ROMs tweaks
These are tweaks that have been confirmed to work on AKU2 ROMs, and confirmed not to work on earlier ROMs Show Wireless Today item
By just adding following keys to the registry will get you a nice 'wireless' today item that show Network name/status, WiFi name/status as well as Bluetooth status. Confirmed to work on AKU2 ROMs
[HKLM\Software\Microsoft\Today\Items\"Wireless"]
"DLL"="netui.dll"
"Order"=dword:00000000
"Enabled"=dword:00000001
"Type"=dword:00000004
Add time sync page to Phone Settings
To add a time sync page to your Phone Settings (Start > Settings > Phone > Options > Time Zones) , set the following:
HKLM\SOFTWARE\OEM\PhoneSetting\ShowTimeZonesPage = 1 (DWORD decimal)
And to remove again:
HKLM\SOFTWARE\OEM\PhoneSetting\ShowTimeZonesPage = 0 (DWORD decimal)
do i add the " " or do i leave them out cuz i tried it with and it isnt working im using 2.17 rom
Leave them out except for the "" around Wireless when creating the reg key. Be careful with the time sync page; when I tried it, it selected the wrong time zone but the right time.
Hi,
I cant seem to figure out how to do this reg tweak? I have PHM Regedit and have created the "wireless tab" but that as far a i have got. Could somebody help or point me in the right direction to doing reg tweaks?
cheers
I could have sworn that someone had actually written a plug in for this thing and I cannot for the life of me find it anywhere, anyone got it?
here you go guys!!!
a good plugin watch memory consumption though!
http://forum.xda-developers.com/vie...velopers.com/viewtopic.php?t=55629&highlight=
Kinmont
here the direct link to version 2
http://www.teksoftco.com/freeware/tekcommplugin002/
you may have to login first to the forum to download.
Totally not the plug in I'm after.
Thanks though...*searches more*
Okay so since I am retarded, I've got PHM Regedit and I've created the folder, but that's as far as I've gotten. I can't seem to understand what this thing wants me to do as far as adding value's to the registry. the way it's written out doesn't make much sense to me, so please someone tell me click by click what to put where.
I'm stupid. Deal with it.
Last post I SWEAR.
For those of us who hate editting the registry I found the CAB file and uploaded it here for you.
No credit goes to me, I found this on HTC Wizard Web, so credit goes to them for the find, and then the actual author of the cab file.
Thanks for this one guys, i've been wanting this type of hack for a long while. Now i can know what's going on with my wireless and bluetooth without all the guess work.

GPS/E-mail Questions

Hey Guys,
I am pretty much all set up. Thanks to all the help and information i was able to Flash it to Helimis Big Storage Dynamic version, added some programs. All works great. Only outstanding items:
E-mail -When i set up gmail pop connection it doesnt seem to connect to gather the messaages on 3g/Edge serivce. However, i did a test and turned on the wireless connection in the comm manager. As soon as i have done this Gmail POP3 works like a charm. As soon as i disconnect the problem persists. I have 39.99 3g data plan. Should the mail work through this data plan? or do i need to always switch to wireless in order to recieve mail? (HIGHly doubt it)
GPS- I have yet to put tomtom on, but i tried my google maps. It "worked" great at one point, I ran Quick GPS and it was able to triangulate my location (get a lock signal -7-8 satelaties), but now it doesnt work. I know i read somewhere not to mess with external GPS, but i switched to COM port 2 but i never un-checked the "auto-config GPS". Do you know what could be causing it not lock in onto my location now. I think it actually did work after i changed to COM2.
COMmanager - i updated my comm manager to duttythroy 10 button version. It has a 3g button to disable it since it drains a lot of battery power. However, how do i disable the GPRS/EDGE doesnt it drain power as well? i see in the Kaiser section there is also duttythroy_data_disconnection+_hspda-switch.cab (what will this exactly doo?)
Thanks all.
Other than these my TILT is amazing.. loving it.. Thanks to everyone who posted and helped.
Dmitriy
e-mail: Does web browsing work? If so, then you might have a server setup problem. If not, call AT&T's support and ask for the PDA help group.
GPS: In my case the GPS is COM4: and 4800 baud. You can set this in "Start", "Settings", "External GPS", then let Google use the "Use Windows Settings" checkbox.
COMmanager: Use Bandswitch instead. Works much better. Latest is 2.4.2, and much be purchased, but worth every penny. (30 day trial I think tho)
scottwilkins said:
e-mail: Does web browsing work? If so, then you might have a server setup problem. If not, call AT&T's support and ask for the PDA help group.
GPS: In my case the GPS is COM4: and 4800 baud. You can set this in "Start", "Settings", "External GPS", then let Google use the "Use Windows Settings" checkbox.
COMmanager: Use Bandswitch instead. Works much better. Latest is 2.4.2, and much be purchased, but worth every penny. (30 day trial I think tho)
Click to expand...
Click to collapse
GPS: - do you put this under Program or Hardware tab? Or do i put com 4 port in both places
E-mail - internet works.. So i guess Server setup problem?
COMmanager- I just took a quick glance at Bandswitch. It seems that it can do everything that ComManager + Kaiser Tweak (kaiser can set time to termination of data connection. My question is.. in the com manager- you can terminate 3g, but GPRS turns on.. does GPRS drain battery? should there be another button to turn off GPRS too?
contact importer
Also anyone know whats a good contact importer. I have a CSV file with 138 entries similar to this one.
Type FirstName Last Name Mobile Home Office -1 IVAN Peters 16462366421
Email: For gmail, i put "recent:" in front of my email addy so it would be recent:[email protected] That should make it work.
fb401 said:
Email: For gmail, i put "recent:" in front of my email addy so it would be recent:[email protected] That should make it work.
Click to expand...
Click to collapse
Thanks for the advice it already has rescent in it. It works when i turn on wifi, so all settings are correct. It simply doesnt work with 3G (and wifi off).
Any ideas on contact importer?
webdk said:
Thanks for the advice it already has rescent in it. It works when i turn on wifi, so all settings are correct. It simply doesnt work with 3G (and wifi off).
Any ideas on contact importer?
Click to expand...
Click to collapse
gmail: check your advanced settings and choose your connection instead of internet choose medianet...that's how i got mine to work...even if it's set to medianet it will still connect through wifi...
strikeIII said:
gmail: check your advanced settings and choose your connection instead of internet choose medianet...that's how i got mine to work...even if it's set to medianet it will still connect through wifi...
Click to expand...
Click to collapse
i am sorry where do i find advanced settings for gmail.
webdk said:
i am sorry where do i find advanced settings for gmail.
Click to expand...
Click to collapse
in messaging - menu - options - select your gmail account then keep hitting next until you see the advanced server settings option...
strikeIII said:
in messaging - menu - options - select your gmail account then keep hitting next until you see the advanced server settings option...
Click to expand...
Click to collapse
Thanks appreciate it works great now. gps and email. Gps had to be set to com 4.
Another question, how do you set it so that all forms of links start Opera instead of internet explorer.
webdk said:
Another question, how do you set it so that all forms of links start Opera instead of internet explorer.
Click to expand...
Click to collapse
I would love to know the answer to that one. I can only get Opera to run if I click the Java link, then copy/paste my links over. Quite tedious.
I would also like a 1-click way to start Opera....
Flapjack said:
I would love to know the answer to that one. I can only get Opera to run if I click the Java link, then copy/paste my links over. Quite tedious.
I would also like a 1-click way to start Opera....
Click to expand...
Click to collapse
go to this link
http://forum.xda-developers.com/showthread.php?t=334999&page=4&highlight=Opera
download the opera mini and selector link...copy and save the opera mini link to windows/start menu/programs folder then copy the selector file to windows/Appdb folder then you'll be able to set the Interenet explorer button in button settings to opera...this is also assuming you are using jbed java midlet...i'm not sure if it works on other java midlet managers...cheers...
strikeIII said:
go to this link
http://forum.xda-developers.com/showthread.php?t=334999&page=4&highlight=Opera
download the opera mini and selector link...copy and save the opera mini link to windows/start menu/programs folder then copy the selector file to windows/Appdb folder then you'll be able to set the Interenet explorer button in button settings to opera...this is also assuming you are using jbed java midlet...i'm not sure if it works on other java midlet managers...cheers...
Click to expand...
Click to collapse
Thanks, I'll try that tonight.
Opera issues
Hey guys, i dont know what happened, but now all the sudden when i use Opera EVERY link i click on i end up loosing Medianet connection and it trys to re-establish it. It ultimatelly suceeds and loads the page... but this does not happen with Internet Explorer (everything works fine there). I also have KaiserTweak set to disconnect internet after 1 min of inactive use.. but its definatelly not that.. since i am active during my "test" browsing period. (which i did)
Any ideas.. i mean ITS Extremelly SLOW (sometimes 4 attempts to re-establish connection) and annoying.. It is also weird that it does actually make the 3g connection but then it breaks for no reason (tested in various locations)
Thanks for previous help - all those problems been solved - Except linking opera to all links (i click on) -> I am reading the trade posted in this thread about it.
- Question though.. i dont need to place a link into windows folder i guess since when i click explorer softkey it automatically opens Java Midlet. Or do i still need to perform that step?
webdk said:
Hey guys, i dont know what happened, but now all the sudden when i use Opera EVERY link i click on i end up loosing Medianet connection and it trys to re-establish it. It ultimatelly suceeds and loads the page... but this does not happen with Internet Explorer (everything works fine there). I also have KaiserTweak set to disconnect internet after 1 min of inactive use.. but its definatelly not that.. since i am active during my "test" browsing period. (which i did)
Any ideas.. i mean ITS Extremelly SLOW (sometimes 4 attempts to re-establish connection) and annoying.. It is also weird that it does actually make the 3g connection but then it breaks for no reason (tested in various locations)
Thanks for previous help - all those problems been solved - Except linking opera to all links (i click on) -> I am reading the trade posted in this thread about it.
- Question though.. i dont need to place a link into windows folder i guess since when i click explorer softkey it automatically opens Java Midlet. Or do i still need to perform that step?
Click to expand...
Click to collapse
I'm not sure whats causing your disconnect i never have that issue...but about your question...with the opera shortcut in your start menu it skips the step of opening your midlet manager then clicking on opera...then when you put that selector file in your windows folder its never asks for permission to remember your session and whatnot...it just goes straight to the home page in opera...
strikeIII said:
I'm not sure whats causing your disconnect i never have that issue...but about your question...with the opera shortcut in your start menu it skips the step of opening your midlet manager then clicking on opera...then when you put that selector file in your windows folder its never asks for permission to remember your session and whatnot...it just goes straight to the home page in opera...
Click to expand...
Click to collapse
Thanks. I will try that.. Would be much better.
Anyone can help me as far as the constant disconnects?

Essential processes for AT&T Tilt Users after each rom flash

Essential processes for AT&T Tilt Users after each rom flash
I know this has been mentioned thousands of times throughout this forum yet n00bs often need assistance fixing their hardware keyboards, email, HTC weather, quick gps, and so on after they flash a new rom for the first time.
While hanging out in Bansville for a couple of days I realized I have been answering the same questions continuously. This is a mini text tutorial, which offers simple fixes for imperative AT&T settings.
So you installed a version of hardspl, flashed a new rom, and performed a hard reset. What next? Well primarily in all probability, you want to make sure the clock settings are in am and pm format and the date is set to m/d/y. To change your clock settings follow this navigation
Start>settings>system>regional settings>time tab>time style drop down set to h:mm:ss tt
To change your date setting:
Start>settings>system>regional setting>date tab> select the date style of your choosing and select ok.
Next, I like to restore my files such as my appointments, contacts, text messages, etc. I personally prefer to use PimBackup. Below is a .zip file for PPCPimBackup. It is an uncomplicated program to use and a lecture is unnecessary to navigate throughout this application, as it is straightforward.
After I restore my files, it is time to inaugurate the Tilt keyboard fix, which repairs your slide-out QWERTY keys to be mapped correctly. For example, without this fix Fn+W will appear as ! opposed to @. Below is the cab file you need to install to remap the keys appropriately. Following the installation of this cab file, perform a soft reset.
The next thing I usually do is correct my connection settings. First, I install ATT_Settings.cab, which you can find below. Then I navigate to the following:
Start>settings>connections>connections>select the advanced tab>select networks>Change both drop downs to Media Net> select edit on both drop downs>proxy settings tab>uncheck everything for both media nets that you changed>then hit ok or x when you are finished.
At this time, I set up my email. However, remember NOT to save your password, you will do this in the following step. If you are using HTC HOME, most likely you are, select the little envelope and create a new account. You can find your email settings by using google if you are using pop3 or whatever.
Next, after I set up my email without saving the password, I install removehiddenproxy.cab, which you can find below. This cab file is important as it allows your pop3 email account’s password to save without adding extra characters, allows for your quickgps to function properly each time, and it also allows you to use HTC Home Weather without getting a connection failure. So install this cab then go back to the email you just set up, edit the account setup, enter your password, and save it. Now, go back to your today screen and tap your weather tab. Now tap Select City and select your city (*Note there are a few patches available to select your town if you do not live in a big city). Anyhow, notice the menu button where your right softkey is, select menu and turn your temperature scale to Fahrenheit and select done.
I suggest setting up your WiFi at this time too.
Well this is my mini tutorial for a basic setup on your AT&T Tilt after you flash a new rom.
Have Fun Flashing and Take Care.
*Special thanks to the creators of these cab files and JimmyMcgee for teaching me the basics.
Am I missing something too?
Is there something to do regarding getting a reasonable GPS fix after flashing newer 6.1 roms or is it a known problem. I keep flashing down to older 6.0 roms with 1.27.14.09 radio because of the faster GPS fix. I would love to use the newer roms but GPS fix time is a deal breaker for me. To save you some time I use SPL 3.28 with 6.0 roms and 3.56 with 6.1 roms. I bounce between Q-mobile and RomEos roms now that we lost dutty. Ive tried all the newer radios and personally they all stink for GPS. Sorry about your brief ban and welcome back, I need your wisdom
*cough* sticky
AWESOME. I keep saying I need to: Start fresh, get NetCF 3.5, get a light rom. But it all seems so complicated to go from current configuration to start over completely, but this will help a lot! Thanks! Now to find the time and the 'right' ROM.
Thanks very much for the reminders, and for the CABs. I flashed my first 6.1 ROM last night, and forgot all about the hidden proxy!
I agree that this really needs to be a sticky...
This is a good tutorial, but here is a good side note to add.
By removing the hidden proxy (which ya do with the removehiddenproxy cab), Tilt users won't be able to get to media net (http://device.home or http://home) or cingular video as the hidden proxy is needed for those.
Then they should just use the Restore Proxy, and that will allow MEdiaNet.
Proxy Manager has both in it.
myteematt said:
Ive tried all the newer radios and personally they all stink for GPS. Sorry about your brief ban and welcome back, I need your wisdom
Click to expand...
Click to collapse
Did you try 1.71.09.01 ? http://forum.xda-developers.com/showthread.php?t=410953
Been having the same issue and finally I think got a break. Tried about 10 SR's and the lock times are steady inside the house.
BTW using DK2
does windows mobile have a localhost file like windows? would remapping those to their needed servers allow the bypassing of the proxy?
mbarvian said:
*cough* sticky
Click to expand...
Click to collapse
+1.
Nice tutorial
I downloaded your PPCPimBackup zip file but when I attempted to open it I received the following prompt: "The central directory was not located . . ." etc.
Thanks for the post BTW. Very helpful and informative.
the Dragon said:
I downloaded your PPCPimBackup zip file but when I attempted to open it I received the following prompt: "The central directory was not located . . ." etc.
Thanks for the post BTW. Very helpful and informative.
Click to expand...
Click to collapse
you were unable to open the zip file? I'll check it out and reupload it if necessary.
edit: works ok here my friend. Unzip the file to your desktop and move it to your storage card then run the program hopefully it works for you.
myteematt said:
Is there something to do regarding getting a reasonable GPS fix after flashing newer 6.1 roms or is it a known problem. I keep flashing down to older 6.0 roms with 1.27.14.09 radio because of the faster GPS fix. I would love to use the newer roms but GPS fix time is a deal breaker for me. To save you some time I use SPL 3.28 with 6.0 roms and 3.56 with 6.1 roms. I bounce between Q-mobile and RomEos roms now that we lost dutty. Ive tried all the newer radios and personally they all stink for GPS. Sorry about your brief ban and welcome back, I need your wisdom
Click to expand...
Click to collapse
I deserved the brief ban.
Anyhow, I noticed that when running 6.1 roms with the Tilt you need an application such as HTC GPS Tool or GPS Test, to open your internal gps, prior to opening your GPS Software.
These are the steps I use to utilize a GPS Fix after each soft reset:
1) download latest updates for quickgps
2) Open GPS Tool>com 4>baud 4800>Hot Start>Then click Open and wait like 30 seconds
3) Open TT7
*If you fail to get a fix after following these steps close all programs and repeat. Eventually you should be getting fixes within seconds.
I've attached GPS Tool for you, good luck.
What exactly does the remove hidden proxy cab do on AT&T Tilts? If you go into your connection settings and uncheck the proxy server- is that the same thing or something different than the cab file does?
Hey Red,
I attached an ATT settings cab which does not enable the proxy by default, and also enableds creation mode in MMS settings. I thought it might be helpful for your thread here. Also, it may seem too advanced for beginners, but i have a thread started here:
http://forum.xda-developers.com/showthread.php?t=418468
This has a step by step guide to how to create an xml file using Schap's Advanced Config 3.0, which can be used to provision all of your advanced config preferences during your UC setup. This tool has really made it very easy to do reduce the amount of work that goes into flashing.
I also attached a cab for total commander, a free, more full featured file explorer; gps test, another gps tool; and advanced config 3.0. Hope it helps.
Thanks... this is a great thread!!!
SaltyDawg said:
What exactly does the remove hidden proxy cab do on AT&T Tilts? If you go into your connection settings and uncheck the proxy server- is that the same thing or something different than the cab file does?
Click to expand...
Click to collapse
/bump
I'd really like to know this too!
Why would anyone ever want the proxy checked? Does it do something for you to have it checked?
sinning said:
/bump
I'd really like to know this too!
Click to expand...
Click to collapse
It removes a HIDDEN proxy, one that you can't remove without a cab. Without it enabled you can't connect to medianet home, and some other things. Most users like to disable it for a myriad of reasons, one of which is that it causes you to be unable to browse while connected to your laptop.
The box that you check in connections is a separate issue, and i think that is actually just old settings, i'm not sure, since even on the AT&T website it tells you no not to have that checked.
scotchua said:
It removes a HIDDEN proxy, one that you can't remove without a cab. Without it enabled you can't connect to medianet home, and some other things. Most users like to disable it for a myriad of reasons, one of which is that it causes you to be unable to browse while connected to your laptop.
The box that you check in connections is a separate issue, and i think that is actually just old settings, i'm not sure, since even on the AT&T website it tells you no not to have that checked.
Click to expand...
Click to collapse
Awesome. So, if I run the cab and remove the hidden proxy- can I then tether my laptop (connect to the net using the Tilt's data)- without getting caught by AT&T? Or is there more to tethering without getting caught?

How to hack TF3D to have 2G/3G setting appears on the setting tab?

I used it once, but I reset my machine recently and can't find the post for doing that now.
Thanks in advance.
I used the Diamond Advanced Config program from this forum
Under Menu, more settings, comm manager
I find my signal is improved with 3g turned off

Proxy Settings not saved

I have searched this forum (maybe I have missed something)
Does not matter what ROM I put on the X1, when I set the proxy settings (for my work connection) they do not seem to "stick".
I saw someone mentioning a registry fix, but I cannot seem to see it.
Also if someone could make a cab the sets the keyboard language to value 1035, I would be very glad, I have a swedish keyboard on my X1, but I prefer the WWE roms.
wrong forum dude
-does this happen on official ROMs?
-did you connect the device to activesync or WMDC? normally the proxy settings get copied from the PC to the PPC
- try to use "wifi profiles" app to create several profiles with the correct proxy settings. you can now create a shortcut to activate the wifi and change to the correct profile with a single click
cheers
Thanks for looking
Not sure how this is the wrong place though as is it pertains to only cooked roms on the X1.
I am using Vista WMDC, but I will explore the profiles you where talking abount.
Essentially I am connected via USB, I have forced the PC side to use Work as the connection and I am either creating a new connection or using the work connectino then configuring the settings.
Once I set the proxy address, and I exit, it's wiped clean from that profile.
"wifi profiles" is a software http://www.freewarepocketpc.net/ppc-download-wifi-profiles-v0-0-2.html
also see if you can cange the proxy from Opera (opera:config) . i used to have an addtional opera mobile application just to access the internet from work without changing the profile.
Thanks, I will download it today and check.
My problem is that I want the wather and other internet based tabs in Manila to work and opera proxy would not settle this.
/J
i had a lot of proxy issues with a lot of non official builds found in most cooked roms. so see if you get this problem with an official rom
THE GRIZZ said:
i had a lot of proxy issues with a lot of non official builds found in most cooked roms. so see if you get this problem with an official rom
Click to expand...
Click to collapse
I'll try, it's jus that the Stick X1 (or even the X2 rom) sux. this is why I am putting cooked roms on it in the 1st place
I just read somewhere someone hinting that there may be a simple Registry fix to make the settings stick.
It's funny, I can go in and out of the connections settings (under work, 1st set my proxy 2nd edit my proxy) and it's all there UNTIL i go to the weather tab and try to refresh the status.
Then if I go back it's cleared

Categories

Resources