Database Develop

HELP I Cant Install any programs (cabs)

When I clicked on the Remove Programs icon, the Programs in storage memory was blank. No programs were listed. However, all the programs on the tilt work.
The other odd thing is that cant install anything now. I tried to install a cab and I received the "programs was unsucessfully installed". The last program I installed before I noticed this issue was resco. Any ideas, I dont want to try a hard reset. Thanks.

i hjave the same problem!!!!!!!!!!!

Very strange - I have the same issue and it just started today. Installed software won't run and I can't install any cabs. Just says it was unsuccessful.
Anyone?

try downloading pocket mechanics, it shows all programs installed and a clean up tool and see if it shows it there, u can delete them through ur program files....see if that works lettme kno how it goes

Tried soft resetting a few times - nothing. Backed up device to my storage card using Sprite Backup and did a hard reset.
Before restoring I tried to install a cab - worked.
Restoring device now from backup....
After restoration installation of cabs - Unsuccessful. Must be sometime in the registry/system?
My question - what did we do in common to get this problem?
Today I swapped SIM cards with another AT&T phone and then put the original one back. I also ran the JumpSPL1.56KAIS on the device but reset at the tri-color screen due to a lack of time.

It is very frusterating as I dont know what to do. Any since I cant load any programs like pocket mechanics I dont know what else to do. Backups didnt help and I know the ones I had a month back showed the programs listed in the Remove Programs tool. THERE MUST BE A REG HACK THAT WILL FIX THIS! Anyone?
The last programs I installed before this happned was the Resco explorer.
Also I have a activesync issue that started about the same time which I have in another post.

I ended up hard resetting it again and am just re-installing everything.

how do you install .net compact framework 3.5 on you HTC?

i ccan't figure this out does anyone can tell me the procedure?
were to download and how to install??

Do a search. on either google or on this forum before asking plz.
This question has been answerd before.
But sins there was no thread that was acualy called like your question ill post the answer and maby next time when someone search they will defenetly find the answer
Go to the link below and download the program and install it on your computer.
When its done it will install it on your phone aswell. (so keep it connectded to the computer while you install it)
http://www.microsoft.com/downloads/d...displaylang=en

Go here
http://www.microsoft.com/downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en
If you read the instructions, it will tell u.
This package uses ActiveSync 4.0 to update the device. Before running NETCFSetupv35.msi, connect your device to your PC. If your device is not connected, ActiveSync will store the CAB file and will not install the package until you connect. If you are not using ActiveSync, run the CAB files on the device that correspond to the device–specific CAB files found in the install folder.

For now, it's not possible to download directly the cab file from MS site

google for the following files:
- NETCFv35.wm.armv4i.cab
- netcfcfg.cab (saves yourself from editing registry)
You will identify trust-worthy locations easy

Easier than you can imagine.
Search MODACO forum ( www.modaco.com ) NETCFCFG.cab and NETCFv35.vm.armv4i.cab
Install both and you will have a simple application in program menu to choose between net 2.0 and 3.5. DONE
You can also choose to use 2.0 for some applications and 3.5 for other

thnks y´all i found it on modaco, got it worked!!

pls help, I can't install it
it writes: "installation error. stop all applications and processes, maximize available storage space, and run installation again. Support info: 3"
I cant even uninstall it, and I get this msg always

"installation error. stop all applications and processes, maximize available storage space, and run installation again. Support info: 3"
Solution: I kill Kaiser Notification and then I can install .NET Framework without this problem. This app. using .NET Framework.
So I think the solution is in closing/killing all running applications.

What is the "kaiser notification"?
I have the same install error.
Thank you.

i have the same installation error as the last two posters. i tried killing every program i can and i still get the error

me too !......still can not install netcf v3.5 !!

After 2 days searching high & low through internet all discussion session, still can not find a solution. Therefore I made a self tracing and tried all kinds of method, at last I found a solution without doing a hard reset !!
rename mscoree.dll under windows\ to mscoree.dll.txt
re-install netcf v3.5
no more any error code comes up
thats it !!

I am running a tytn II, with the same problem. Install, i get the error. I can't uninstall, atleast not when I try through the 3.5 installer (remove or repair) or the "remove programs" on the kaiser.
I have hard reset the phone 2x,and regardless of whether I am installing from the exe or the cab file on the phone, still get the same error as everyone else.
This past time, i tried changing the name of the mscoree.dll under windows\ to mscoree.dll.txt and mscoree35.dll to mscoree35.dll.txt
same problem. I'm really beyond annoyed. Can someone help?

have a sprint diamond, how do i check which version i have and if its the newest?
it seems like all the programs i try and install say it requires a newer version than the one installed on the device but its only a month old so im not sure.. any help would be great..
thanks!!

I have the same question. I've searched all over and can't find an explanation of what .Net 3.5 is or how to find out if I have it already. I have a Sprint (CDMA) HTC Touch Diamond. Thanks.

I had the same problem on my HTC Kaiser, but I found a solution.
I found a program that acts like safe mode on a computer.
So if you install that program and restart in safe mode (you need to select safe mode when you boot), you will be able to install the compact framework 3.5.
Probable some locked files prevent the normal installation.
The program is an evaluation version, limited to 14 days, but since you only need it for the framework, you don't need to keep if you don't want to.
The app: SafeMode 3

...still not working on my touch diamond.
i've renamed the dll and tried the safe mode app. But I still get the same error.
btw: i have this problem since i installed a cooked rom.

Thanks. Was also having the install issue (I had previously installed and then removed 3.5 but good old ms clearly didn't remove correctly).
Renaming mscoree.dll worked (I tried mscoree2.5.dll before but that didn't work as it was in use so I couldn't rename that).
Glad it worked, was facing dropping back to previous backups or installing a task manager to kill processes (a good task manager program will show all your processes), just to reinstall 3.5.

another thing that goes wrong with the 6.5 wm and tf3d installed:
when you go to the movies, and you put your phone into vibrate, with the left volume keys, the phone goes into vibrate fine,
but when you set it back to full volume, the next time someone calls, it only vibrates, you have to go to: Settings, Sound and change the ringtone manualy to make it ring again...
Sorry, Wrong Forum...

Any suggestions for installing SPB Mobile Shell?

I have a stock ATT Tilt, with the stock ROM (6.0)
I am trying to install SPB Mobile Shell. I have never used the software before and downloaded the trial. Each time I try to install the CAB from my device, it is unsuccessful.
Any suggestions? (And yes, I have redownloaded the software and tried to install it a number of times)
Thanks

freddiemac1 said:
I have a stock ATT Tilt, with the stock ROM (6.0)
I am trying to install SPB Mobile Shell. I have never used the software before and downloaded the trial. Each time I try to install the CAB from my device, it is unsuccessful.
Any suggestions? (And yes, I have redownloaded the software and tried to install it a number of times)
Thanks
Click to expand...
Click to collapse
where are you trying to install it too? does it say anything else besides unsuccessful?

freddiemac1 said:
I have a stock ATT Tilt, with the stock ROM (6.0)
I am trying to install SPB Mobile Shell. I have never used the software before and downloaded the trial. Each time I try to install the CAB from my device, it is unsuccessful.
Any suggestions? (And yes, I have redownloaded the software and tried to install it a number of times)
Thanks
Click to expand...
Click to collapse
Never had this problem, are you using the right version?

I have downloaded it three times from spb's own site, both to my computer and directly to my device. (I don't have a windows machine, so I am downloading the CAB files). I even downloaded the EXE file and extracted the CAB from it.
Each time as I click on the CAB file (on my device), it says Installation was unsuccessful.
Any thoughts?

Mobile Shell
Have you made sure to check it's box in the "today" settings page to activate it on "today". Also remember to uncheck everything else on that page.

It's not installed...so there is nothing to check. Just trying to figure out how to install...

freddiemac1 said:
It's not installed...so there is nothing to check. Just trying to figure out how to install...
Click to expand...
Click to collapse
i'm having the same problem! i can't find any way to fix it either!

Go to Settings/Today/ Items and uncheck all items on your today screen. Load the SPB onto your SD Card, however when you click it and it then prompts you to the location installation, leave it on Device.

asfoor said:
Go to Settings/Today/ Items and uncheck all items on your today screen. Load the SPB onto your SD Card, however when you click it and it then prompts you to the location installation, leave it on Device.
Click to expand...
Click to collapse
done that and still does not work

here you will be OK with this trial version...
http://rapidshare.com/files/177073963/SpbMobileShell2.arm.cab

Thank you so much. It finally installed....but
However, it is only v. 2.0.0. Anyone know where to get the latest version THAT WILL INSTALL?

You can download direct from SPB themselves, or a software provider like Handango lets you download the trial version.

I have seen the same issue with installations of this too. I found that the installation .cab file was too small and so (althought it 'appeared' to install) it failed. I got round the problem by downloading directly from the PC and then moving the cab to the SD card before installing from there.
This would not account for your failed PC installation but may be worth a go if you still find it an issue.
Regards
Tony

Hi,
I had the same problem last night, the CAB would not install from the SD card or Main Memory.
In the end i downloaded the EXE from SPB and installed via Windows Mobile Device Center (old ActiveSync ) and it was fine.
Cheers
Dan

Hello...i am new in windows mobile, and my kid's cp running 6.1 in asus p320 asking me to help her to change it in a finger friendly phone, but problem was that everytime i install spb direct from the spb site, got an unsucccesful message at the end of the installation, were it took me so much time just to find out (not to mention it stuck from 43% installation indicator) its unsuccesful. tried to install it to the device itself but says not enough memory, so i used my storage card instead. Pls help and tell me exactly how to install it.
thanks and more power.

MediaExperiencePanel problem

Hi there
I´m having some problems with the MediaExperiencePanel.
Problem is that I tried to run the R3A Mediapanel cab, (after installing the new R3A Panelmanager, that is working flawless, btw).
The R3A mediapanel, for some reason I don´t know, did not work, it kept lacking to the point of uselessness. So I tried to uninstall it, but with no luck, as it keeps saying that some files can´t be deleted. I manually tried to remove them with Rescoe or win commander, but no luck. When I try to install either the old R2A medapanel.cab or the new R3A mediapanel.cab, it keeps saying that the installation failed, so now have have no media panel at all
The 2 files, that I can´t delete is:
\Programmer\Panels\MediaExperiencePanel\MxpProcess.exe
\Programmer\Panels\MediaExperiencePanel\Resources\MxpFont.mxf
Any help will be greatly appreciated

This is beginning to get on my nerves
I suspect that the reason that I can´t delete the two files, is that the process "MxpProcess.exe" is running. But when I try to kill thge process, nothing happens?
Any help will be much appreciated

this one helps me - rename file MxpProcess.exe then soft restart and then delete file.

Problems installing TomTom 5 with WM6.5

Hi
I posted this in another board but didn't get an answer so I'll try again here (with more details).
I've tried to install TT5 on my Himilaya with esfane's German version WM6.5. After finally finding threads from people with the same problem I tried the solutions there but with no luck. What I've tried so far:
If I try to install the app using the .cab file it gets all the way to the end but then says installtion failed. I still get the today plug-in but it only beeps at me. The Navigator folder is empty.
I extracted the .cab on my PC, renamed the files according to the .ini and copied them to the folder on my PPC - no luck. The .exe just gives an error messge "failed to start". I'm assuming all of the registry entries are missing.
That brings me to the end of what I can do. I know the .cab install works with WM6.1, which is the solution in the wiki but it doesn't work on my device.
I don't want to upgrade because that means buying the software again.
HELP!!!!
Thanks in advance.