Related
I have a 9090 bought in Dubai. I am now getting a bluetooth expired message and the imate help desk told me that I must get a ROM upgrade from the Qtek suppliers. Problem is that they all give a country error. Is there a patch for the bluetooth expiry problem? Is there a ROM upgrade that is open for all Qtek 9090s? thanks Bill
You may just try the BT upgrade to 3900 (file on FTP server) or try to correct the Country error with GetDeviceData.exe also on the FTP site plus the instructions of the other thread about upgrading QTEK
Joao Caldeira
Sorry, but the 3900 does not seem to work (at least out of the box)
Just tried it and started to receive that message.
Joao Caldeira
Someone has posted the attached file and said that it can fix BT license expired error. I have not tried it myself, so use it on your own risk.
To use it - extract archive to your PocketPC and run EXE file.
Thanks.
I'll try it as soon as I have my cradle.
Joao Caldeira
Hi.
No more License expired message, but I'm not being able to pair with my BT Headset HBH-660.
Maybe I'm doing somethiing wrong... I'll check it out...
Thanks,
Joao Caldeira
OK.
Paired the device. When trying to "connect" the QTEK showed failes.
Turn BT off and on and everything is working.
THANKS
Joao Caldeira
BT_key
I copied the two extracted files over to myQtek 9090 and opened the exe file. A list of BT addresses came up and a write key icon. When I try to select a BT address and write it, I get the following message: ResetMFG(). DeviceIoControl(). FL_IOCTL_BDK_OPERATION fail!
Am I doing something wrong - I copied the files into my documents on the 9090 and ran the exe file through file explorer on the Qtek.
Thanks,
Bill
BT_Key
Thanks. This solved my problem.
I was getting this message everytime I turned bluetooth on:
Sorry! Bluetooth can no longer be used because the license has expired.
BDA: 00:00:00:00:00:00
Key:
E3E534E19B3E8214C543A
73C0A8B9A9074DD3B175
3515CD8
For some reason after a System ROM upgrade, my bluetooth device showed what it looks like a mac address as 00:00:00:00:00:00. This tool fixed the problem.
For anyone that is running into the Bluetooth License problem please try this.
DJ
Yes it does.Seems after upgrade BT have no mac adress so this "thingie" writes it down in some register.Any way done job for me.
Damn.. same thing happened to me today (
Reset time\soft reset not work
the fix when i launch i get "ResetMFG(). DeviceIoControl(). FL_IOCTL_BDK_OPERATION fail! " too..
Is there another way to set up a mac address? :O
Chooo
Upgraded to 3900... still 00:00... BDA and that fix program doesn't work!
Chooo
well in WM2003 rom they use old versions of the Bt stack thats why it shows license error
Ok.. but.. it's normal as answer? ^_^;;;
No mistaken.. thx for let me know this.. but danguard is already dead here in italy.. how the hell can i fix? I dont want to install a wm5, there isn't a way in registry to rewrite BT?
Chooo
The BT update worked for me.
FYI
I have tested 3900 and now 3500... nothing..
i want to try other stack,like this : OEM_WWE_160_600.sa.CAB
but.. how can i delete used file "audioGW.dll"?
Chooo
mamaich said:
Someone has posted the attached file and said that it can fix BT license expired error. I have not tried it myself, so use it on your own risk.
To use it - extract archive to your PocketPC and run EXE file.
Click to expand...
Click to collapse
I just want to give a short feedback.
I was experiencing the license-problem since a ROM-Update failed and my extended ROM was deleted. After hours of resaerch I finally found your post and I have to thank you very much! With this small file now everithing seems to work as it should again!
I can only recommend it to everyone with the same problem!
Greetz from Germany!
Hello,
today I get my HTC MTeoR.
For my Exchangeserversync I need to install a other root certificate.
But the Phone had a Applicationlock.
All known solutions for other HTC Phones don't work.
Have anybody a new solutions?
Regards
sotmysoft
I got the same problem, and after speeking with both the Danish & English HTC support, they both told me to wait for a rom upgrade or check for modification to "registration database". I have now looked through the whole internet and so far nobody seems to solved the problem.
So now i have HTC MTeoR as a brick, and a HTC TyTn send back because of problems with screen and keyboard !! Well done HTC !!
Peter
sotmysoft said:
Hello,
today I get my HTC MTeoR.
For my Exchangeserversync I need to install a other root certificate.
But the Phone had a Applicationlock.
All known solutions for other HTC Phones don't work.
Have anybody a new solutions?
Regards
sotmysoft
Click to expand...
Click to collapse
I have read somewhere that you need a special Regeditor which is recognised by the HTC and then change the following Key: HKLM/Security/policies/policies
00001017 from 128 to 144
That did the job on my QTEK 8500
...what does this policy do? Mine contains the value 148...
Have read the same on the net, but does not work on MTeoR.
Peter
Churchill said:
I have read somewhere that you need a special Regeditor which is recognised by the HTC and then change the following Key: HKLM/Security/policies/policies
00001017 from 128 to 144
That did the job on my QTEK 8500
Click to expand...
Click to collapse
I think it enables you to install a certificate
The reg hack that has worked previously for other WM5 devices doesnt work on the Mteor. In fact, you get a permisison denied error when trying to change the value.
Apparently HTC are working on a new ROM but can't give an ETA :evil:
What is this?
Has someone ever tried this registry editor?
It seems to work with MTeoR, but I don't have it yet...
ftp://xda:[email protected]/Uploads/Breeze/regeditSTG2.zip
I used the one called regeditSTG but I think it is the same thing...
My device is QTEK 8500 and the regeditSTG works on my device
Confirm that regeditSTG2 DOES unlock the Mteor, but the phone will not let you copy this app to the phone or to the card- so it has to be copied from a computer directly onto the storage card before using. Then it works!
Thanks guys, this is a real breakthrough
I have found another thing in the HKLM\security\policies\policies add the following DWORD "0000101b" value 1
I found it by Modaco. There this is a solutionif you get error 57 when running some software. BUT and this is big, when I added the value my TOMTOM received a new Device ID so it asks to activate and this being the second device that I activate I have to keep on changing the value to 0
Does anyone have for me maybe cracked version of Tomtom 5 mobile v5.20 for Windows smartphones with QVGA display (not symbian)
Solution i've found was posted by Pagemakers on the Expansys forums...
http://www.modaco.com/Mteor-application-unlock-solution-t244205.html
Tested and working. Allows you to import root cert and also the stops the insufficient permissions when installing software.
MTeor unlock
howdy,
does anybody know how to unlock HTC MTeor?
seems to me that the device is unable to edit the registry.
(I'm installing a root certificate)
already installed on Qtek 8310 and 8500 but the registry on MTeor is uneditable..
Any suggestions ?
Thanks
Here is most "official" way of application unlocking of virtually any HTC produced device: one third of unlocker is made by HTC and remaining two by M$
Unzip to device and run in numbered order. Then check incoming sms folder* for the status report. If report is negative then your rom have non-default privileged OEM cert, flashing to something more standard would solve the problem.
* it is not real sms, just system notification placed in sms folder (nothing is transmitted over radio) you can perform unlocking with phone turned off and sim card removed to be shure
anyone who has a Trinity with a non-GPS ROM installed; could you please post me a dump of your registry via a program like PHM or Resco.
could anyone with the GPS ROM do the same too.
as a note: private data is stored in your registry, therefore it's a good idea to do this with a freshly flashed ROM with your sim PIN (if you use one) unentered.
I've come from the Hermes area to make this request since there is ongoing work to provide GPS functionality so I'd really appreciate it, thanks!
I've been trying to install Internet calling on my diamond, while I managed to get the VOIP working using the WM6VOIP (ftp://xda:[email protected]/Hermes/WMXL_Support_Files/WM6VoIP.CAB) cab file and SIP Config, another problem showed up. I have tried even the last WMVOIP+SipConfig CAB package with the same results
The moment I install the WM6VOIP cab, the internal GPS function goes dead - it does not work anymore. Soft reset will not fix the problem.
It took me 3 hard resets to figure what exactly was causing the trouble
I guess the WM6VOIP cab overwrites some system files and/or registry settings vital to the GPS Receiver
Is there anyone who had the same problem or anyone who tried to enable Internet Calling on HTC DIAMOND. Any solution to this?
Same here
I had the same problem. Hard reset to fix it.
Something in the VOIP installation makes the GPS invisible to any app which tries to use it. Even the QuickGPS app would not work.
Too bad...I would love to have the VOIP option..but not over GPS.
same problem here
So THAT'S why my GPS stopped working! Jeez! I think we need a new CAB of VoIP software from WM 6.1.
EDIT: Has anyone tried this one?
http://forum.xda-developers.com/showthread.php?t=401608
adamz said:
So THAT'S why my GPS stopped working! Jeez! I think we need a new CAB of VoIP software from WM 6.1.
EDIT: Has anyone tried this one?
http://forum.xda-developers.com/showthread.php?t=401608
Click to expand...
Click to collapse
Nevermind. That one breaks GPS too and can't be uninstalled. *sigh*
same here... did you installed it manually or by a pack (containing sip config tool, gsm codec, bass fix and internet calling) ?
I installed the pack... and my gps died... but not on my HTC trinity.
Someone should install all the packages manually, one by one , and see how it goes.
Please post your findings.
Unfortunately I'm in the same boat :-(
daren1 said:
I had the same problem. Hard reset to fix it.
Click to expand...
Click to collapse
But I found solution:
Rename in windows directory following files:
\Windows\dnsapi.dll
\Windows\ipdialplan.xml
\Windows\rtcdll.dll
\Windows\voipphonecanvas.dll
\Windows\ringback.wma
Delete all registry changes made by instalation which is described by author in post #66 in http://forum.xda-developers.com/showthread.php?t=401608&page=7, reset diamond and if you want you can delete now files which was renamed in previus step.
After that go to settings->System->External GPS->Access and remove tick from "Manage GPS automatically". After that confirm with OK and go one more time in the same place and turn it on "Manage GPS automatically". I'm not sure that this change are nessesary, but now I have working GPS whitout hard reset.
Hi, i've got the same problem after installed wm6voip.
Folowing philipZ post, i've just renamed
dll files with total commander(hidden files) and reset diamond, the gps worked again
I've not tryied voip anymore....
Just Renamed, no registery changes:
\Windows\dnsapi.dll
\Windows\rtcdll.dll
\Windows\voipphonecanvas.dll
http://forum.xda-developers.com/showthread.php?t=415262
tof42 said:
Hi, i've got the same problem after installed wm6voip.
Folowing philipZ post, i've just renamed
dll files with total commander(hidden files) and reset diamond, the gps worked again
I've not tryied voip anymore....
Just Renamed, no registery changes:
\Windows\dnsapi.dll
\Windows\rtcdll.dll
\Windows\voipphonecanvas.dll
Click to expand...
Click to collapse
I'd like to rename that files but I can't ! I use totalcommander but when i change name, nothinghappens and the ile get its name back !
Please help !!
Thx !
how to rename dll files
hi guys, like wanabo, i cannot rename any ROM file under \windows. i tried to use the default file explorer, total commander and resco explorer...no luck. every time i try to rename the dnsapi.dll file i get the error 'access denied'.
please can someone help?
thank you
Hello,
i am having trouble with getting work VOIP on my Kaiser.
I downloaded cabs from http://forum.xda-developers.com/showthread.php?t=415262&highlight=voip
Now in Settings > Phone is new tab Internet..
but when i run Sip Config Tool V2.0.1, fill in all fields, click on Save Configuration
application crashes due to error "Invalid argument passed to DMProcessConfigXML"
So i tried to create _setup.xml and cab to set it up this way, but when I try to install this cab i get "Installation of voip.cab was unsuccessful"
Is there any problems with generic HTC rom and VOIP?
thanks for any advice
Hello,
I got exactly the same problem ... Have you found a solution ?
Thanks,
Guillaume
I also can't solve it and simple download PortSIP.
Several month I can't any problem with VoIP on my Kaiser.
It a free tool. No registration.