I got a really strange bug. I've upgraded to the RUU_Prodigy_1060701_101_11310_QTEK_WWE_Ship.exe
and installed Default_Prodigy_Nordic_keyboard_1102.sa.CAB for the swedish keyboard.
When the phone rings and I want to mute it by pressing volume up the phone will never ring again until soft-reset!
I checked on my friend's unupgraded qtek and it worked correctly, it muted the ring tone but rang again when the next call came. My phone mutes the ring tone forever. Anyone else experience the same problem or is it just me?
/Peter
Ok I found the problem, it was a bug in PQZ (http://www.nicque.com/PQz/) which I had running. Fixed in the latest version.
/Peter
Hey folks any idea on this?
I've had my Diamond for just over 12 months until now ring tone has worked fine when i get an incoming call but now it's stopped working. I usually have it set to "vibrate then ring" but now it just vibrates, i've tried all the options including just plain and simple "ring" but to no avail. Interestingly when i preview it when i've made a change it plays the ring tone for incoming call fine so the speaker must be ok. I've also changed the ringtone played as well but has the same net result.
any thoughts welcome
Press the volume button on the side of the phone.
There are two tabs [Ring] and [System]
Make sure [Ring] is not set at silent
I had the same problem and that was the cause. Just did it for no reason and still does it periodically. At least I know what to do to fix it now
Viffer800 said:
Press the volume button on the side of the phone.
There are two tabs [Ring] and [System]
Make sure [Ring] is not set at silent
I had the same problem and that was the cause. Just did it for no reason and still does it periodically. At least I know what to do to fix it now
Click to expand...
Click to collapse
Spot on mate!! Many thanks for that as you say no idea how mine came to be on silent for Ring either. Thanks again
Hihi,
I just recently updated my N1 to FRF83 on stock all the way and have started to experience a problem during my incoming calls and would like to ask if anyone else experiencing this as well.
Even after setting all volumes (notifications,ringing,media etc etc) to 100%, whenever I get an incoming call the phone doesn't ring and it only vibrates/LED trackball.
I've doubled checked that there isn't any contact-specific settings for ringtones and also tried using a volume control app to 100% all volumes. Also checked that its not a speaker problem cos the chosen ringtone plays alright on music players. Also tried both custom ringtones and default ringtones and there's no difference.
Been using my sister's phone to call my phone and the thing is that this situation is not consistent.
Sometimes it rings without any issue. Sometimes the ringtone rings for 3-5 secs and silences. Sometimes it does not ring while trackball/vibrate activates. Sometimes it does not ring and trackball/vibrate does not activate as well. The issue is equally inconsistent regardless of whether the phone is on standby(screen off) or active(screen on).
Thanks in advance if anyone can help
I have the same issue with the FRF91 build of Froyo. Looks like the Google forum has a bunch of people reporting this as well.
I'm going to try to go into recovery and clear the cache. If it doesn't work I'll wipe the phone and see if that fixes it.
I'll be darn if I can figure out what is going on here.
4.1.2, stock except for custom kernel brick bug prevention.
I've had this rom running since it was released (this is a note international, GBT via amazon, used in the states)
Never had an issue, but I've started to notice a couple missed calls. Today, I saw what was happening.
Incoming calls, the ringer only rings for maybe 1/2 second, phone continues to "ring" but you never hear
anything! It's like it has been silenced as if you quickly pressed a button. That's how it acts without bluetooth.
If I have my bluetooth (jawbone ERA) turned on, SOMETIMES, if the screen is off, it NEVER rings, on the speakerphone
I'm using to dial my Note, I hear it ring 2 times, then go directly to voicemail. Sometimes it does that, sometimes it does
not, otherwise, the phone ringtone plays for a split second, headset continues to ring normally. Screen shows the incoming
call, but no ringtone. I haven't tweaked, installed, updated anything to cause this. Just one day it started doing it.
I'm about to do a clear reset, but it's just a PITA to set it up. Device is going on 18 months old, first issue I've really had
with it other than a bad USB port or a worn battery.
Any clues?
edit: Found the issue...I use call control as a phone number blocker. In settings, I had on for blocked calls, "remove partial ring" turned on. Once that was turned off, everything started working.
I have had my Z3c about 6 weeks (US- AT&T) and I really enjoy everything about this phone. However, recently the phone quit ringing audibly when I have an incoming call. When I get a call, the screen comes on and shows that I have a call, the phone vibrates like it always does and the LED flashes bright white. But no sound, no ringtone. Actually - a very quiet ringtone, like through the small phone receiver speaker maybe. All other notifications sound out normally: SMS, email, alarms all work fine. Speakerphone works fine. Only incoming calls have no ring volume. Of course, I have checked the volume settings and have the ringtone & notifications volume slider wide open. I have changed ringtones, adjusted every sound and volume setting on the phone to no effect. I turned 'OK Google' off since I have read that in listening mode, OK Google can impact speaker output. Nothing had any effect. I have searched across the internet and haven't found any answer and no one mentioning this issue with the Z3c.
I did find that the exact same issue happened with the Z1 and Z1c when they got the KitKat update in early 2014 (http://www.androidcentral.com/sony-fix-coming-xperia-kitkat-audio-bug ) but i don't find any resolution discussed so I expect that Sony fixed that with an update.
My next step is a hard reset but I can't do that before the weekend so I thought I would throw this out to see if anyone else has the issue or - better yet - a solution.
One thing I am going to try is the stereo sound mod for the Z2 ( http://forum.xda-developers.com/z3/general/z2-stereo-sound-mod-incoming-calls-t2921840 ) if the hard reset doesn't work.
EDIT: 10/30/14 - I continued to try different things with the no-ring-volume issue. I took the time today and did a factory reset including erasing internal storage but that didn't help. In addition to what I described above I found the following:
- on an incoming call, the speakerphone does not work. If I turn on speakerphone, the caller can hear me but I cannot hear them. If I turn off speakerphone, everything is fine (I hear the caller in the earpiece, they hear me).
- I have LED set to off so it should not come on except for charging. But it flashes - fast and bright white - on an incoming call. This may not be part of the issue but I have never seen it flash before on incoming call. Maybe I notice it now since I have been staring at my phone while making dozens of calls to myself from another phone to figure this out.
- External speakers do work fine, I can play music, video, etc. and it all sounds fine.
So...any ideas?
I would try setting it back to a default ringtone. It may be having an issue with the one you are using. This is assuming your issuing a custom ringtone.
CollinsJ - Thanks for the response but I have tried many of the ringtones, including the default. I was actually using the default ringtone when the problem started. I am going to edit the original post to include a few more things I learned today related to this problem.
Maybe it's time to take it in for repair.
I have the same problem with my Z3, did you find a solution for that??
z3 sound
Same here. i downgraded to kitkat, no effect.
on sony forum there is a ton of people with this issue.
I got Z3 dual, incoming ringtone volume is terrible and speakerphone volume is lower than speaker for ear.
I rooted but i found no patch to fix it.
Viper4Android doesnt help
Any ideas?
Hi,
I have a Z1 which had similar problem, phone would not ring when there was an incoming call. Tried setting to default ringtone, which didn't work.
The second thing I tried was restart the phone in safe mode, and tested it, and got the incoming call ring. After that I restarted normally and it is now working. Don't exactly know what it did but it works now.
Press volume key up then choose sound. Sometimes it has been set to priority.
It worked for me!
patelsk
Thank you. I restarted my phone in safe mode, like you said, and all works fine.
I have had my phone 2 years and yesterday it stopped ringing and the alarm doesn't ring either, help please
No ring sound volume on incoming call
hi Lynne rickaby, have you solved the F...k issue with the incoming sound tone?
I have an sony xperia z3+
I bought xperia st26i phone. incoming call appear, can answer, but ringing sounds not comes out. vibration also work. when i play a media file, it plays. but sound not come out. i successfully make the factory setting function also to settle it. but all my effort going vain. how to solve it. please help me