I'm trying to connect my phone (ATT HTC Tilt) with a stereo bluetooth headset or trying to send files and everytime I scan for new devices it gives me an error stating "PROBLEM WITH BLUETOOTH HARDWARE"
Additionally, the "Turn on Bluetooth" option always turns off automatically....
What is going on? Can anyone help?
Please...
Anyone who experienced this or can give me a hand? Thanks!!
I had this same problem all of a a sudden on my Kaiser. But after doing a hard reset this got resolved.
And now i just flashed Dutty's 6.1 ROM. Its amazing update..
Cheers
Thanks Arun...
Tried the hard reset NO LUCK! Problem persists, and bluetooth keeps turning off. I go back to the wireless manager and check both boxes and they come back off in 30 seconds!!
When searching for devices it says (ERROR: PROBLEM WITH BLUETOOTH HARDWARE)
Not able to beam or receive files at all.
Any help? Thanks so much!!
Same Problem
Running into same problem here. I haven't even updated the ROM from stock yet, although I have done the JumpSPL step (cuz I received the white screen). My Radio is 1.27.14.09.
Any help is appreciated.
I would think that if you have done a hard reset and you don't install anything and you still have a problem then you **** is borked. time to do a warranty exchange.
has your bluetooth ever worked, with the rom that is currently on your phone?
Problem with Bluetooth Hardware!!!!
I am having the same problem. I have the stock AT&T ROM. Here is exactly what is happening:
The bluetooth is not working on my Tilt at all. It has lost connections with devices that it was already paired with (a Motorola Q Global and a headset). All attemps to pair the devices again lead to the following: "Error: Problem with Bluetooth Hardware".
When I go to Bluetooth Settings through the Comm Manager, then Mode and check "Turn on Bluetooth" and "Make this device visible to other devices", it unchecks as soon as I exit the settings menu. The Comm Manager constantly shows the bluetooth being off and when I tap the icon, the phone "thinks" for awhile and then it greys out again.
The only change that I have made from the time that it was working is to install the iphone package, and a today plugin (which I have since uninstalled) found here.
I recently changed my Kaiser Tweak bluetooth settings: I changed the BitPool from 'medium' to 'very high', but my headset was still working after that. The other settings are:
Sample Rate - 48000 (Advised)
Use Joint Stereo - Enabled (Default)
Receive Files - Enabled
Any ideas/suggestions?
Forced to do a hard reset
kcrumbley said:
I am having the same problem. I have the stock AT&T ROM. Here is exactly what is happening:
The bluetooth is not working on my Tilt at all. It has lost connections with devices that it was already paired with (a Motorola Q Global and a headset). All attemps to pair the devices again lead to the following: "Error: Problem with Bluetooth Hardware".
When I go to Bluetooth Settings through the Comm Manager, then Mode and check "Turn on Bluetooth" and "Make this device visible to other devices", it unchecks as soon as I exit the settings menu. The Comm Manager constantly shows the bluetooth being off and when I tap the icon, the phone "thinks" for awhile and then it greys out again.
The only change that I have made from the time that it was working is to install the iphone package, and a today plugin (which I have since uninstalled) found here.
I recently changed my Kaiser Tweak bluetooth settings: I changed the BitPool from 'medium' to 'very high', but my headset was still working after that. The other settings are:
Sample Rate - 48000 (Advised)
Use Joint Stereo - Enabled (Default)
Receive Files - Enabled
Any ideas/suggestions?
Click to expand...
Click to collapse
They only way to fix the problem was for me to do a hard reset.
Related
Hi @all!
I know there are many BT issues concerning TyTN II and WM6. But this one is new, I think:
After pairing my Kaiser (WM6.1) with my BMW E46 handsfree unit, the first call I make immediately after pairing works fine. But after terminating this first call, there is no sound at all. Neither my Kaiser nor the handsfree unit utters a sound, though my Kaiser displays the small handsfree-icon, that confirms the connection is established.
I tried so many things to solve this problem. I tried different radios and different ROMs. But nothing worked till now.
Does anybody have an idea?
-------------------------------------------------------------------------
I soved the problem on my own!
First, the BT extension software "JETWARE" didn't help. But then I changed the JETWARE settings - and voilà: this was the thing. In advanced options I selected "Phonebooks", "Query status indicators", "Update status indicators" ang "Hang up/ swap to incoming call". All other options in advanced options I unselected. Then in phonebook options I selected all categories to sync, opened the "menu" -> "set limits", selected "Exclude Fax numbers" and "Limit how many numbers to sync" and set all options to 0.
Then I hit "Done", "Done" and one more time "Done" and connected my Kaiser with my BMW Handsfree unit (E46 ULF). And what happened was unbelievable. It worked perfectly suddenly.
Maybe this workthrough can help anybody else.
My conclusion: JETWARE solves the silence problem, you just have to choose the right options in JETWARE settings!
Greets to all active board users!
Here are some specs:
HTC Kaiser
ROM: Official HTC WM6.1 Professional 3.03.405.0 WWE
Radio: 1.64.06.04
Protocol: 25.70.40.02W
Do a search for "Unexplained volume drop to zero".
It's an ongoing thread about this exact problem.
My problem is different, I think, because after turning bluetooth off in comm-manager, sound works fine again immediately.
Any ideas?
I have a similar issue when I pair my Tilt with the Parrot MK6100. It will work for a while and then I can try calling someone or receiving a call. It shows connected, but I do not hear anything. The far end cannot hear anything either. What works for me is to reset the Parrot by turning it off and then back on.
I would be interested in a fix for this.
Tried to solve the problem by turning off htc home. but no success. i'm getting mad ...
BMW bluetooth problem
I had a similar prblem with my BMW 740 e38, which uses teh same ULF box. I cured it by disconnecting teh battery. Note, if your radio uses a key code, check you have it before disconecting teh battery!
Good luck.
Richard Racer
I have the same problem with my Audi, I think it is the Bluetooth in the car rather than the handset. I get this problem with several handsets. You might want to see is BMW has an update.
Diconnecting the car battery (for more than 30 minutes) didn't solve the problem.
Nobody out there who can help?!?!?!?!?!?
I'm getting mad ..................
mynameisrabbit said:
Nobody out there who can help?!?!?!?!?!?
I'm getting mad ..................
Click to expand...
Click to collapse
Try Jetware, it is a 30 day trial but I think it is the BT software in your BMW. Check some BMW forums and see if there is an update.
Bluetooth Issue
Hi guys,
it is definitely the TyTy II and not the Bluetooth in your car!
I have a Parrot MK 6000 in my Honda and had NO issues with my previous HTC TyTn in combination with the Parrot or any other bluetooth hands free.
After every phone call the phone looses bluetooth connection and re connects after a minute or so.
Really annoying! I'm thinking to get rid of the phone if there is no update very soon.
jetware doesn't solve the problem.
is ist possible that the protocol is the reason?
first, i supposed, the reason for that annoying problem could be the number of contacts in pocket outlook.
but in fact i really have no idea till now.
anybody out there who can HELP??????????
SOLVED
Look at my first post!
mynameisrabbit said:
Hi @all!
I know there are many BT issues concerning TyTN II and WM6. But this one is new, I think:
After pairing my Kaiser (WM6.1) with my BMW E46 handsfree unit, the first call I make immediately after pairing works fine. But after terminating this first call, there is no sound at all. Neither my Kaiser nor the handsfree unit utters a sound, though my Kaiser displays the small handsfree-icon, that confirms the connection is established.
I tried so many things to solve this problem. I tried different radios and different ROMs. But nothing worked till now.
Does anybody have an idea?
-------------------------------------------------------------------------
I soved the problem on my own!
First, the BT extension software "JETWARE" didn't help. But then I changed the JETWARE settings - and voilà: this was the thing. In advanced options I selected "Phonebooks", "Query status indicators", "Update status indicators" ang "Hang up/ swap to incoming call". All other options in advanced options I unselected. Then in phonebook options I selected all categories to sync, opened the "menu" -> "set limits", selected "Exclude Fax numbers" and "Limit how many numbers to sync" and set all options to 0.
Then I hit "Done", "Done" and one more time "Done" and connected my Kaiser with my BMW Handsfree unit (E46 ULF). And what happened was unbelievable. It worked perfectly suddenly.
Maybe this workthrough can help anybody else.
My conclusion: JETWARE solves the silence problem, you just have to choose the right options in JETWARE settings!
Greets to all active board users!
Click to expand...
Click to collapse
I will try your settings with my 2005 X5 tomorrow...but as I can see in the set of settings you have chosen, there is no contacts transfer, no last dialed, no sms can you please confirm?
rabbit,
i have the same exact problem (lose sync with phone immediately after a call, then re-initiates contact a minute or so later), but is getting yet another app the only solution?? is there any other solution that fixes the WM6.5?
Ok, not sure if anyone got the same problem as mine, but here is my problem:
I have a Diamond using AZTOR v7 Rom, radio vBS14 if that matters and Sony Ericsson DS205 as my headset. I start my bluetooth on my diamond and can pair up with the DS205 without any problem. I can also listen to music without lag and sound is also crystal and solid.
When there is a call kicks in, I can answer the call by pressing a button on my DS205..... However, the problem comes when I end my call, the headset will be disconnected afterward and I have to manually press a button on the DS205 to make it reconnect. Each time when I make a call or when I receive a call the headset will be disconnected.
Luckily (or not), I found a workaround: Whenever I pair up my headset, I need to go to Setting -> Bluetooth -> and "Refresh" the services that I want to enable on the DS205 headset. That involves un-checking the services enabled (including "Wireless Stereo" and "Hands Free") and re-checking the services again. After I have done this "resetting", the disconnection problem I described above will be gone.....
Each time I restart the phone or have the bluetooh disabled on the phone, I need to go through that manual procedure again to make my headset work perfectly.
As you can imagine, that is quite annoying.......does anyone have the same problem as me?
I don't have this problem, but i have another problem, when i use the orignal rom, i can use my headset(jabra bt3030) in my diamond and it will automatically connect to use hands free and wireless stereo mode when i turn on bluetooth, so when i change to use swift 7.5 full rom, i have to resetting the bluetooth in diamond everytime when i close bluetooth
I can only get wireless stereo for my Plantronics Bluetooth Stereo headset. Any ideas why I can't get hands-free. Radio issue?
It was possible with some earlier ROM, but I can't remember which... (yes, I'm a flashing addict).
I'm having the same exact problem & it's annoying as hell. At this point, I can't get the bluetooth function on the phone to activate at all. I use the same bluetooth on another phone with no problems whatsoever, so I know it's the phone. I'm running the original rom.....not a flasher.
Have you tried Jetware?
Sorry, just installing this doesn't change anything. Still no hands-free.
Is there a specific option you want us to set?
shinji_lee said:
Have you tried Jetware?
Click to expand...
Click to collapse
lit2fly said:
... Each time when I make a call or when I receive a call the headset will be disconnected.
Luckily (or not), I found a workaround: Whenever I pair up my headset, I need to go to Setting -> Bluetooth -> and "Refresh" the services that I want to enable on the DS205 headset. That involves un-checking the services enabled (including "Wireless Stereo" and "Hands Free") and re-checking the services again. After I have done this "resetting", the disconnection problem I described above will be gone.....
Each time I restart the phone or have the bluetooh disabled on the phone, I need to go through that manual procedure again to make my headset work perfectly.
As you can imagine, that is quite annoying.......does anyone have the same problem as me?
Click to expand...
Click to collapse
Yes - I have a very similar problem with my jabra SP700. The Diamond 'forgets' the wireless bluetooth mode every time I disconnect the two devices (although the Stereo Bluetooth icon is still showing in the status bar).
For a short while I was having to re-pair the devices every time I got in the car - until I found the same workaround as you.
There must be a proper solution???
Hello, I had that problem in my HTC Diamond with Pioneer DEH-700bt and my jabra 3030 and she solves when changing in the registry the key to it that identifies the device in pocketpc HKLM/Software/Microsoft/Bluetooth/Sys the key "COD" and I introduced the value decimal 5898764 that identifies the device in smartphone
luck
juanfervs said:
Hello, I had that problem in my HTC Diamond with Pioneer DEH-700bt and my jabra 3030 and she solves when changing in the registry the key to it that identifies the device in pocketpc HKLM/Software/Microsoft/Bluetooth/Sys the key "COD" and I introduced the value decimal 5898764 that identifies the device in smartphone
luck
Click to expand...
Click to collapse
I have this value in COD key but I have the problem anyway.
Any solution to this annoying problem?
i use my diamond with my bluetooth handsfree kit in the car, it is classed on the phone as a headset though. the sound is ok, a bit echoey but ok. but the microphone doesnt seem to pick up my voice, i have to really shout for people to hear me, on my old Xda Orbit it worked fine. any ideas?
Hi All,
I just got a Jabra SP700 after pairing it with my Kaiser everything works fine ( making a call, receiving a call, Playing music through FM radio and TT navi. through the radio). The problem is when I disconnect the devices and turn them both on they will reconnect automatically but I can't hear anything through the SP700 ( FM Radio ). I will have to delete the device from the phone and pair it again in order to make it work.
Is there a better software for managing the bluetooth connections?
Open to any suggestions.
Thanks.
Edris said:
Hi All,
I just got a Jabra SP700 after pairing it with my Kaiser everything works fine ( making a call, receiving a call, Playing music through FM radio and TT navi. through the radio). The problem is when I disconnect the devices and turn them both on they will reconnect automatically but I can't hear anything through the SP700 ( FM Radio ). I will have to delete the device from the phone and pair it again in order to make it work.
Is there a better software for managing the bluetooth connections?
Open to any suggestions.
Thanks.
Click to expand...
Click to collapse
I have the same problem with my SP700 and my Tritton BT stereo headset.Phone calls work almost all the time through the SP700 speaker, but playing music or through the FM radio seems to be a problem. I can get them to pair up sometimes by only checking the Wireless Stereo box. It works for a few times, but then I have to delete and re-pair again.
I've searched for all over for answers, but nothing seems to be a permanent fix. It's very frustrating to use my devices for anything else but phone calls.
Just to add a bit of info, I do not have any problems with my old Motorola HS820. Of course, I'm not using SP700.
Hope that helps your troubleshooting.
I have exactly the same problem with hte SP700 connecting to a Touch HD.
I notice there is a software upgrade for the SP700 on the Jabra site but I can't get to apply it because I lack a driver to allow the PC to recognise the JAbra SP 700.
Any ideas would be greatly appreciated.
Thanks
Mal
Possible solution
Hi
I have had similar problems with the SP700. I was using the Hyperdragon III before the current ROM (in signature). With my old ROM I found that the following method worked:
1) Turn on the SP700
2) Wait for it to make one low tone
3) Turn bluetooth onto discoverable mode on the phone
4) The device then automatically connects over both Hands Free and Wireless Stereo protocols
5) Turn discoverable off
Now that I have the Hyperdragon IV ROM I notice slightly different behaviour:
1) Turn on the SP700
2) Wait for it to make one low tone
3) Turn bluetooth onto discoverable on the phone
4) The device then automatically connects over hands free protocol
5) Go into bluetooth settings on the phone then the devices tab and manually connect by selecting "Set as Wireless Stereo" from the pop up context menu- this connects over the wireless stereo protocol
6) Turn discoverable off
One thing I do find very annoying about the SP700 is that it disconnects from the Wireless Stereo protocol after a phone call is ended. When this happens I have to manually re-connect it by pushing the button on the SP700 until it peeps.
I too would value a software upgrade for the SP700. I just get the feeling that it has somehow shipped with a beta or incomplete firmware. If anybody knows how to do the firmware upgrade please share this.
Thanks
andrew-in-woking
Found a solution that works for me!
First of all thanks guys for the suggestions !
I think SP700 works fine ( GREAT! ) but the issue is with the A2DP. I found out that A2DP turns on the first time after pairing the devices but it does not turn off. So the next time you pair the devices it is turned on and won't accept the new connection. So what I tried to do was after connecting I turned off A2DP and turned it back on and it works fine.
Suggestion
Search for A2DP Toggle, install it and after pairing the devices if it doesn't work just turn A2DP off and back on.
I assigned the 6th hardware button on my Kaiser (PTT Button) to A2DP Toggle that way I can have access to it all the time.
Works great.
Edris said:
Found a solution that works for me!
First of all thanks guys for the suggestions !
I think SP700 works fine ( GREAT! ) but the issue is with the A2DP. I found out that A2DP turns on the first time after pairing the devices but it does not turn off. So the next time you pair the devices it is turned on and won't accept the new connection. So what I tried to do was after connecting I turned off A2DP and turned it back on and it works fine.
Suggestion
Search for A2DP Toggle, install it and after pairing the devices if it doesn't work just turn A2DP off and back on.
I assigned the 6th hardware button on my Kaiser (PTT Button) to A2DP Toggle that way I can have access to it all the time.
Works great.
Click to expand...
Click to collapse
Thanks! Nice App! Tried it with my Tritton BT stereo headset and it works! Had to install to my device instead of Storage card, then had to delete and re-pair, but it so far I can toggle between on and off Stereo Headphones without any problem. Will try on my SP700 shortly.
I attached the Cab if anyone else wants it.
Thank you!
Works with SP 700!!!!!
Mal Bridgeman said:
I have exactly the same problem with hte SP700 connecting to a Touch HD.
I notice there is a software upgrade for the SP700 on the Jabra site but I can't get to apply it because I lack a driver to allow the PC to recognise the JAbra SP 700.
Any ideas would be greatly appreciated.
Thanks
Mal
Click to expand...
Click to collapse
When the software loads, follow the instructions, do not install with any of the microsoft wizards that pop up, it will install itself. I couldn't find anything that lists what changes that were made.
SP700 Firmware
FYI,
I too had the same issues and downloaded the sp700 firmware update. I thought the same thing about the drivers, but called Jabra and they told me the firmware update has the drivers embedded in it. When you start the install you cannot plug it in till it tells you to. After you plug it in it installs the drivers. But BEWARE I have not been able to complete the upgrade, it stopped halfway and bricked. I called support and they said there is nothing to do, but luckily I bought it from Costco and they returned it. So being not so bright I tried it again but on a different computer (thinking that there might be a conflict) and it didn't even load and bricked it again. So I returned it yet again. So then I gave up on Jabra support and found A2DP toggle. It works good enough, so I am leaving it at that....
Take Care
David
Tilt WM6.1
andrew-in-woking said:
Hi
I have had similar problems with the SP700. I was using the Hyperdragon III before the current ROM (in signature). With my old ROM I found that the following method worked:
1) Turn on the SP700
2) Wait for it to make one low tone
3) Turn bluetooth onto discoverable mode on the phone
4) The device then automatically connects over both Hands Free and Wireless Stereo protocols
5) Turn discoverable off
Now that I have the Hyperdragon IV ROM I notice slightly different behaviour:
1) Turn on the SP700
2) Wait for it to make one low tone
3) Turn bluetooth onto discoverable on the phone
4) The device then automatically connects over hands free protocol
5) Go into bluetooth settings on the phone then the devices tab and manually connect by selecting "Set as Wireless Stereo" from the pop up context menu- this connects over the wireless stereo protocol
6) Turn discoverable off
One thing I do find very annoying about the SP700 is that it disconnects from the Wireless Stereo protocol after a phone call is ended. When this happens I have to manually re-connect it by pushing the button on the SP700 until it peeps.
I too would value a software upgrade for the SP700. I just get the feeling that it has somehow shipped with a beta or incomplete firmware. If anybody knows how to do the firmware upgrade please share this.
Thanks
andrew-in-woking
Click to expand...
Click to collapse
I have the exact problem that you are having with the new, Hyperdragon IV, ROM.
Is this A2DP Toggle really the only way - I mean what's the difference between pressing a button on my Kaiser to reconnect and pressing the button on the SP700 ??
I have tried using Mortscript as shown http://forum.xda-developers.com/showthread.php?t=382172&highlight=a2dp&page=2 Although I edited the end out because it kills the player after ending a call. This hasn't helped either
I am off to see if the same problems occur with my lady's N96. If not and no good solution can be found for this I may have got her a new present.
Aren't I nice ?!
Found another possible solution, it,s called zoA2DP. So far it works flawlessly between my SP700 & stereo headset without having to toggle anything or change any settings. When you install it, delete your original pairings and add them again, make sure that hands free & wireless stereo are checked in advanced options on you BT settings. I believe this is a registry mod, there are no icons or any noticeable applications running in the backround.
The thread is here
http://forum.xda-developers.com/showthread.php?t=279127
Cab file attached
After i installed "BT Audio" to receive Tomtom messages over BT, I tried the option "Tray Program" in the menu. Now a BT-icon is flashing in the tray and it does not disappear anymore. Not even after a boot or reset. I unistalled the program, but the flashing icon is still here.
Can anyone help me to get rid of this icon?
btw. The application does not work properly: it keeps the BT busy at all times and does not give it back after a tomtom-instruction. I use it in combination with a Cardo Scala Rider Q2 headset for bike-to-bike communication. Because in the hierarchy the tomtom instructions go before talking to your partner, talking is not possible anymore as long as BT audio runs on the Kaiser, even without Tomtom running...
thanx!!
In bluetooth settins go to the tab "mode" and uncheck "Make this device visible to other devices"
Thanx, it works!!
Hi guys,
I have an X1 and a new Nokia6600 slide.
I have them both paired to my laptop and car (which have both bluetooth built-in) Both of the phones have bluetooth enabled and are always visible, all options to disable bluetooth or to stop being visible are disabled.
The biggest difference is this....
When I turn on my laptop or step into my car, my Nokia says, look I found your laptop/car, you're now connected! (without me doing a single thing)
My X1 is like ".........................." nothing... I have to manually enable the connection via for example ActiveSync, and chose to connect via bluetooth and then everything works fine.
I checked every setting concerning bluetooth or security and everything but I just can't find an option to make my X1 act the same as my 6600. It also doesn't matter if I just turn off the 6600 and have only the X1 turned on.
Maybe it is a setting, maybe it needs some tool or something.. I hope somebody here can help me or point me into the right direction.
Thanks!