Database Develop

WM6, bluetooth car kit and incoming port problem

Hi guys,
I am at the end of my tether... I just bought a JVC head unit with on board bluetooth, so I can use it as a car kit. But I can't get my Treo 750 to pair with it! It just locks up after I enter the passkey... and the car kit just says "error" after a certain amount of time. I'm running a vanilla (extended ROM removed) version of the 3 Australia ROM.
So, I rolled back to Windows Mobile 5... same problem... UNTIL I went into the Bluetooth settings and setup an incoming COM port. Then it paired up perfectly and all was well.
So I've reinstalled WM6, but it doesn't have the option to create an incoming COM port. That's really annoying. I've googled a heap, and searched these forums a fair bit too, but haven't been able to find any sort of workaround. Is there a registry hack, third party program, or some other way I can tell it to allow an incoming connection from the car kit?
Thanks in advance!

Has anyone had any ideas on this? I have a real issue now, as I rolled back to a WM5 ROM which I found on these forums but I'm having awful problems with it - it drops calls all the time and sometimes they just go silent..... the call stays connected but I can't hear the person on the other end.
I really need to get either the original Telstra WM5 ROM, or a way of getting WM6 to work with my car kit! Any ideas... anyone??

Okay... now I really feel like I'm talking to myself but anyway.... thought I'd give an update.
After heaps of trial and error, I managed to install the Universal version of the Broadcomm bluetooth stack onto my device. And it pairs - hooray!
However... when I make a call, no sound comes through the speakers
No other version of the Broadcomm stack will run on my Treo, I just get the memory error that lots of other people have mentioned.
Chalk another person down who's royally annoyed with Palm for putting such a dodgy implementation of Bluetooth into these devices. It's my one and only bugbear to date.

I have exactly the same problem when pairing my WM6 Treo 750 to a Parrot MK6100 carkit. After entering the passcode on the Treo, the device just hangs. The carkit says it has connected succesfully, but nothing happens. After restarting it does not recognize the carkit at all.
Did you find a solution yet? I am also looking for a different Bluetooth stack that is guaranteed to work with the Treo.

Good to see I'm not the only one. No, I haven't found a solution yet unfortunately
The closest I've come is that hacked Broadcomm Bluetooth stack. My only hope is that some nice developer will help us develop something that works!

Hi Ben,
I solved my problem yesterday. I tried two suggestions.
1) Leave the passcode field blank (do not enter '0000') and press next
2) Install http://www.jetwaremobile.nl (fully functional 30-day trial)
After that pairing succeeded in a couple of seconds and all is working well. Let me know how it works out.

Thanks very much MattMax!
I had tried the Jetware software previously, and it didn't help. But I hadn't tried leaving the passkey field blank. Did that this morning... it popped up with a connection dialog asking if I wanted to allow the connection... went back to the passkey screen, I entered 0000 and away the sucker went. How simple was that!!
I just upgraded to the latest ROW2.23 WM6 ROM the other day, so I'm not sure if that made any difference either. But it's now paired and (seems to be) working well, just need to make and receive a few calls to make sure.
Thanks very much for your suggestion!

Good to hear that it worked out!
I had exactly the same experience, leaving the field blank, after that entering '0000' and it worked. I had just installed Jetware Mobile, but apparently that is not necessary for the solution.

Snapvue rom +gps easy install (nbh+ ruu flasher)

OK, I've used the actual rom image to make this simple flasher. This is cmonex flashing tools, and olipro nbh maker, using the rom provided by taopaipai.
Just unrar, make sure you are hard spl-ed, and run the romupdateutility.exe AS AN ADMIN.
It should flash nicely, an you will get the new rom.
Be carefull: I'm just providing a way to flash the rom, I don't know how to help people in distress, and if you didn't apply HARD SPL from cmonex, it won't work.
I take no responsability, and something goes wrong, I'm sorry for you ;-). It worked for me.
Known bug from the rom: headset doesn't work (if it works, please report). Sound works though.
EDIT: ok I found how to get sound to headset. Just plug the headset in and reset snapvue side. If the high pitch sound appear, just reset it again.
I guess this is the workaround for now. Hoppefully someone find something better. At least you don't have to reboot vista.
Sound on WM side doesn't work
Link is : http://rapidshare.com/files/137092443/ruushiftgps.rar.html

IS sound working for you now?
About to flash tonight, is audio now working for you ? WinMo/Vista
And on the headphone jack in WinMo/Vista ?
Microphone still working in WInMo ?
cheers,

Do I need to liberate it after flashing again..?

It's the same rom. So yes you need to liberate it afterward

lucid said:
About to flash tonight, is audio now working for you ? WinMo/Vista
And on the headphone jack in WinMo/Vista ?
Microphone still working in WInMo ?
cheers,
Click to expand...
Click to collapse
are you actually posting this after reading my post?
EDIT: got some of your answers now. Read first post again

so seems am the kamikaz since no one reported to try it, okay whatever, a small step for a human being and a large leep in bla bla bla whatever armstrong said

okay that was nice, though i vae no idea whats telnav, but i seem to have gps not tested yet

does the headset jack works on vista?

I found the cause of the high pitch sound. This occurs when you start vista while charging the shift. To start it without annoying sound simply unplug the shift then boot vista if you have your headset plugged the sound will only go through the headset and if it's unplugged then you plug it in after you boot up vista it wont work. The sound will only come out of the first device recognized when vista boots. I'll try and find a way to fix this issue. Maybe restoring the shift to factory refaults is the key but we'll see. I'll do a back up when I get home then reformat my shift. I'll keep you guys posted on the results.

Can post other places besides rapidshare and megaupload
Hi,
It a great effort but I have problems trying to download from both rapidshare and megaupload. Please assist by posting other links. Thanks.

anyone here has the original wwe dump... I was too excited i forgot to do a backup of my oem rom

janstan said:
I found the cause of the high pitch sound. This occurs when you start vista while charging the shift. To start it without annoying sound simply unplug the shift then boot vista if you have your headset plugged the sound will only go through the headset and if it's unplugged then you plug it in after you boot up vista it wont work. The sound will only come out of the first device recognized when vista boots. I'll try and find a way to fix this issue. Maybe restoring the shift to factory refaults is the key but we'll see. I'll do a back up when I get home then reformat my shift. I'll keep you guys posted on the results.
Click to expand...
Click to collapse
Do you mean you have sound working on the headset if booting with it? or that you don't have the high pitch sound that way?
If you can get sound through headset, can you tell me how? and what's your radio version?
Thanks
EDIT: ok I found how to get sound to headset. Just plug the headset in and reset snapvue side. If the high pitch sound appear, just reset it again.
I guess this is the workaround for now. Hoppefully someone find something better. At least you don't have to reboot vista.

I think that's the best solution nothing happened even if I reformated vista. It's definitely with the snapview rom.

How about the RADIO ROM ? I gather that the SnapVue ROM we have now, is slightly incompatible with the RADIO ROM that we have now.
Can someone bake a ROM with the CANADION radio version ? WOuld that work for Europe ?
The GPS Inside the Sihift is superb quality. In-House fixes with 6-8 sats !!

Liberate the WM
After installing the new rom I've not bee able anymore to liberate the Snapvue.
The answer is : Installation of SHIFTpack.liberate.cab was unsucessful.
ANy suggests?

Try and "hard reset" your new installation (canada ROM) then try liberating it.

just to share my SDcard drive is working properly, no matter what i do it works perfectly, i would say it might be really after installing all vista updates, shift update dois update and battery optimizing tool, one of those fixed my problem, sound is working through jack but not through speakers, GPS is working okay so all on all everything is great so far

@Rabia
Thanks Rabia, just two questions:
...my SDcard drive is working properly, no matter what i do it works perfectly, i would say it might be really after installing all vista updates, shift update dois update and battery optimizing tool, one of those fixed my problem, .....
Do you mean that you can view your SD card in WM?
...sound is working through jack but not through speakers, GPS is working okay so all on all everything is great so far...
I desume you installed the Canadiam Rom that allows you to reveal the GPS on Snap Vue, how did you stop the audio and allow the jack? Did you youse the taskmgr.exe and in the device tab you just modified the dev wave1?
Thanks

ferrett1968 said:
Thanks Rabia, just two questions:
...my SDcard drive is working properly, no matter what i do it works perfectly, i would say it might be really after installing all vista updates, shift update dois update and battery optimizing tool, one of those fixed my problem, .....
Do you mean that you can view your SD card in WM?
...sound is working through jack but not through speakers, GPS is working okay so all on all everything is great so far...
I desume you installed the Canadiam Rom that allows you to reveal the GPS on Snap Vue, how did you stop the audio and allow the jack? Did you youse the taskmgr.exe and in the device tab you just modified the dev wave1?
Thanks
Click to expand...
Click to collapse
Do you mean that you can view your SD card in WM?
unfortunatly not otherwise i would have opened a new post
I desume you installed the Canadiam Rom that allows you to reveal the GPS on Snap Vue, how did you stop the audio and allow the jack? Did you youse the taskmgr.exe and in the device tab you just modified the dev wave1?
i have both working jack and speaker but not at the same time, if i want speaker side i unpluge the jack and restart WMO side, and if i want the jack i plug it first then restart wmo again and it works

Rabia said:
Do you mean that you can view your SD card in WM?
unfortunatly not otherwise i would have opened a new post
I desume you installed the Canadiam Rom that allows you to reveal the GPS on Snap Vue, how did you stop the audio and allow the jack? Did you youse the taskmgr.exe and in the device tab you just modified the dev wave1?
i have both working jack and speaker but not at the same time, if i want speaker side i unpluge the jack and restart WMO side, and if i want the jack i plug it first then restart wmo again and it works
Click to expand...
Click to collapse
so you don't have the annoing buzz from WMO after uograding to Canadian Rom?
About the SD in WM i posted this:
http://forum.xda-developers.com/showthread.php?t=416899
could it be helpful?
Thanks

[SOLUTION] Your Bluetooth disconet?

Your bluetooth disconect when you use your handsfree in your car????
Then try this software: JETware Hands-Free Extension 1.31.
I have four days without disconect.
(sorry for my english).
UPDATE 27-07-2009:
Versions of JETWARE:
1.11 (ShareWare)
1.20 (ShareWare)
1.31 (ShareWare)
1.31.178 (ShareWare)
1.40 (FreeWare??)
the good: The program solutions the disconnects of the bluetooth
the bad: BUT, in my handsfree (Saab 9-3 2008), i can make a call but i cant cut a call (i must to cut the call in the phone)
and if i uninstall i lose mi contacts in the car.
It is not perfect.

Hopefully this works mate.
Gonna try now & report back later
Cheers

Hopefully this works mate.
Gonna try now & report back later
Cheers

This Works so far. Gonna keep on trying & report back shortly. Will post another thread if it continues to be successful as this needs to be seen !

Just right.
This Works.
(sorry for my english again).

Great find hcorreo. This DOES work !
Been testing for a week now and i have had ZERO disconnections.
Thankyou so much mate

How exactly does this work?

Thats the work of 6 month looking for.
Thank you.

Screen won't stay off
I loaded the extension but now my backlight won't stay off. Is there a registry fix for this? Otherwise, it looks like a great BT extension.

Problem of the light:
I have the same problem with the version 1.31.178.1.
Try with the version 1.31.

Could this issue be fixed without having to buy a third party application?
Iam using my X1 with my builtin BT handfree in my Volvo and the problems just keeps coming.
The BT logo newer disappers like ive read about in other threads but the car and the phone seems to have massive communitcation trouble. Adressbook sync like it should but when i try to call from the car, it takes about 30sec until the phone reacts. Same goes for answering. When i press my answer button it takes about 30sec again for the phone to swallow that command. Sometimes it works, but then after 20sec the car reports that it lost its connection and if iam lucky, the connection is restored automaticly by the car.
The strange thing is that ive moved from my HTC Tytn to this phone, and the HTC never had any kind of trouble. I was running WM6 on the Tytn. Could it be WM6.1 that causes the trouble or is it the hardware in the phone?

Updated first post with info of versions and more info.

flashed to EnergyRom WM6.5 and disconnect is gone too
Used to disconnect randomly after 50-80second on my car's bluetooth

I have another problem, my bluetooth headset(SE HBH DS-205) disconnecting when i use WiFI

Jet Ware is good for the bluetooth desconexion.
Someone have a idea about how can i hang a call with the JetWare installed?
Thats the only thing to be perfect...

Headset problem

I'm using HTC wired headset "HS S200 Stereo Headset" which it was in the original package.
I try to press the headset button to pick up the phone, though it does not work or works by chance.
Also I try to answer my incoming calls with it, but other side person can not read me (hear my voice).
I tested it sometimes from home land line and it works on that time to make me surprised but angry.
I tested it in different situations: If I try to answer a phone call when I'm listening to music,this problem happens.
So what to do with this Wired Headset???

Was it working good when you bought your PPC?
Do you have another PPC to test it with?
If it has the same behavior on the other PPC, then it is time to throw it in the garbage
If it works fine, then the problem is in your phone that might be occurred by some software or corruption in registry, all you have to do is backing up your data (avoid registry backup), then perform hard reset and restore your backed up data.

wbadry said:
Was it working good when you bought your PPC?
Do you have another PPC to test it with?
If it has the same behavior on the other PPC, then it is time to throw it in the garbage
If it works fine, then the problem is in your phone that might be occurred by some software or corruption in registry, all you have to do is backing up your data (avoid registry backup), then perform hard reset and restore your backed up data.
Click to expand...
Click to collapse
I've done Hard Reset once and same problem was there before that. I think I must buy a new better one.

Looks like the port has some issues, get to the service station and get the professional guys look into the matter.

Two Bluetooth problems with carkits

Hello friends,
I have been unsuccessfully looking for a solution for two problems I have with my Diamond2 and the Bluetooth carkits of my two cars. I have found several threads with similar scenarios but I have not found a solution.
My Diamond2 is running the latest ROM available in HTC assistance page (RUU_Topaz_S2_HTC_SPA_2.53.412.3_Radio_Signed_Topaz_61.44etc.25.35_4.49.25.91_Ship.exe) without any modification apart from some applications installed (TOMTOM, TotalCommander, ...)
Problem 1
=======
Scenario: 3 years old opel/vauxhall carkit
Everything works, the phone pairs with the car and I can make calls. The problem is that the Bluetooth of the Diamond2 turns off randomly and I have to switch it on to make it work again, which is quite annoying while you are driving.
I have found a CAB called BTrestore.cab that checks the Bluetooth and turns it on if it is off. This works, but the problems is that this software discharges the battery very quickly. There are also some registry tweaks that are supposed to solve the problem, but I tested them with no success.
Problem 2
=======
Scenario: Latest SKODA/VW rsap carkit (Skoda Columbus with Bluetooth premium)
Everything works, the phone pairs with the car and I can make calls. The problem is that sometimes when I leave the car and the Dimaond2 disconnects of the carkit, it loses the phone signal and the only way I have found to recover it is restarting the phone. This does not happen always, only occasionally, but if I forget to check if the phone is working after leaving the car, I end up missing calls.
I would appreciate it so much if someone could help me to solve these problems.
Thank you in advance and best regards,
Javier

Set Turn off Visible mode - Never

I have the same problem with my HTC Diamond II and a Opel Corsa with integrated bluetooth handsfree. The bluetooth on my phone turns itself off all the time, I can turn it on again and after 2 or 10 min. it turns off again. I have upgraded the car with the latest sofware, but no improvement.

andonov said:
Set Turn off Visible mode - Never
Click to expand...
Click to collapse
Thanks for your answer Andonov. Sadly, that setting does not solve any of my two problems .

Try the attached solution i made for the same issue. It does not drain the battery and works like a charm. You need to install mortscript. Copy the toggle app to your card and change the script to point to your SD card( i had mine for the Diamond 1)

ghosty7 said:
Try the attached solution i made for the same issue. It does not drain the battery and works like a charm. You need to install mortscript. Copy the toggle app to your card and change the script to point to your SD card( i had mine for the Diamond 1)
Click to expand...
Click to collapse
Thanks Ghosty7! I'll try it.
I am also trying two workarounds but it is not clear to me yet if they work:
* For the first problem, it seems that disabling the rsap option of bluetooth makes the connection last longer, but I haven't done a long trip yet to test it to be sure of this. Nevertheless, without rsap, I have seen the connection to last more than 10 minutes, what was unbelivible before.
* For the problem two, I have manually configured GSM connection, I mean, I have set the GSM band and "protocol" instead of leaving it as automatic.
I will tell you if something of all this works.

Sorry to butt in here, but I have another issue with BT and car kits, which someone may be able to help with.
With many of the latest cooked ROMs, when I pair my Topaz with my car kit, and I get to the page where you input the pairing code, the keyboard changes from a QWERTY to a numeric keypad. From that moment on, I have lost access to any form of keyboard other than the numeric one. On the keypad options pop-up, I can select Full QWERTY, Compact QWERTY, but there is no change to the numeric keypad.
I did find a cab file many months ago which cleared this and restored the keyboard choices. But this seems to cause issues with the hardware buttons, which stop responding.
Does anyone know a safe way to reinstate the keyboards after a car kit has caused the keyboard to premanently change to a numeric kepypad?
Thanks.

Hissing Syd said:
Sorry to butt in here, but I have another issue with BT and car kits, which someone may be able to help with.
With many of the latest cooked ROMs, when I pair my Topaz with my car kit, and I get to the page where you input the pairing code, the keyboard changes from a QWERTY to a numeric keypad. From that moment on, I have lost access to any form of keyboard other than the numeric one. On the keypad options pop-up, I can select Full QWERTY, Compact QWERTY, but there is no change to the numeric keypad.
I did find a cab file many months ago which cleared this and restored the keyboard choices. But this seems to cause issues with the hardware buttons, which stop responding.
Does anyone know a safe way to reinstate the keyboards after a car kit has caused the keyboard to premanently change to a numeric kepypad?
Thanks.
Click to expand...
Click to collapse
Have you tried SIP change?

Bruce Inman said:
Have you tried SIP change?
Click to expand...
Click to collapse
Thanks for that. I'll give it a go.

Hi,
I have the same problem number 2 with my vw premium carkit. I wrote to the HTC support regarding this problem. First they asked me to send them the photo of the phone screen when the problem occurs. After that they sent me btspy and sked me to make some logs, however, the btspy does not want to run on my phone (something about missing certificates and/or files). Replied to them I can't run the program and no reply for over 2 weeks. I'm staring to think I'm gonna lodge a complaint to them and ask to repair the issue or replace the phone with a one where the problem won't appea, it's still on the 2 year guarantee