Just wondering if anyone is having the same problem with telenav, or if there is a fix to it. Ive looked around the forum with search and cant seem to find anything but telenav not being compatible with custom roms.
Im using Dutty's latest rom with my Tilt and i recently just added telenav to my phone, when i bring it up, it connects fine and gets to the screen where you select "drive to" and "maps". When i try to determine my own location to record it, i hit go and it basically brings up the connecting box where it goes from 0 to 100% but it doesnt move at all for me after a few mins anywhere i go..also i cant do any routes for the same reason..it seems like its just not making a good connection when im outside. I checked my connection settings, proxy is not on..set up for medianet on both connections as i read from another persons suggestion, but still no go..
assisted gps is also turned off..i can do quik gps and everything else just fine but it hangs when trying to download the route...ive re-installed the program also but no go still.
anyone have any ideas to what might be causing this?
if this problem has been resolved, ive looked and looked in the forums but maybe my eyes are blind lol.
thanks for any help.
I'm running Dutty's latest 6.1 dated April 9 and Telenav and have no issue. Runs flawless.
ok
What are your connections settings, are you on medianet?
liquidraven said:
What are your connections settings, are you on medianet?
Click to expand...
Click to collapse
Yes I am on medianet. Proxy is disabled.
gprs setting
is your gprs setting set to chap authentication, i havnt touched this but mines set to chap, but this is auto configured when setting up the network with att?
still not working..
Yah my telenav is still hanging up at getting gps when trying to find route and my location...installed gpsgate and changed the radio to 1.58.16.27 not sure what else to try..
Can't remember, but do you download telenav through Pocket IE after you flash the custom rom?
I can't remember if it auto-decides what download you get based on your PIE useragent, or if you select the product for downloading... but if it's based on UserAgent you may run into issues...
Cellular video, for example, does not work if the UserAgent is not the Tilt
yah
i downloaded the cab through a txt message i received from att. i selected att and then my phone and it auto installed from there.
only thing i havnt tried is changing my rom but i dont see how that would help..im using dutty's apr 1st release.
liquidraven said:
i downloaded the cab through a txt message i received from att. i selected att and then my phone and it auto installed from there.
only thing i havnt tried is changing my rom but i dont see how that would help..im using dutty's apr 1st release.
Click to expand...
Click to collapse
First, did you Hard reset after rom flash at the "Tap here to alighn" screen? Second, did you install Telenav prior to any cooked rom flash? The reason I ask this if you got the file from AT$T while you were using a stock rom then that is fine, but if you got while you were using a cooked rom, it is probably a bad file. The reason is that most cooked roms have the PIE User agent set to TYTN II not HTC-8900 (AT$T Tilt) which could cause a corrupt download if you indeed have a Tilt. I suggest uninstall, power down, power back up and try the file I attached. I have installed it with every rom I have tried, literally dozens and never had an issue. When I say power down, power back up, dont do a soft reset. Use the power button.
yah i always do the hard reset after flashing. i dl'd it with dutty's apr 1st rom..i selected the file based off carrier and phone model. I will try your cab after work..im hoping it will fix it haha thanks man. Once i get home i will let you know how it went
liquidraven said:
yah i always do the hard reset after flashing. i dl'd it with dutty's apr 1st rom..i selected the file based off carrier and phone model. I will try your cab after work..im hoping it will fix it haha thanks man. Once i get home i will let you know how it went
Click to expand...
Click to collapse
Good Luck. I hope it works for you.
thanks!!
lol it did fix it..thanks
liquidraven said:
lol it did fix it..thanks
Click to expand...
Click to collapse
You my friend are quite welcome. Just glad it worked.
ugh
well for some reason still it seems to be taking its time when looking for a route somewhere..it gets to 10% after 2 mins and 30% after 6 mins..it was working fast as hell yesterday and i dont think it should be taking that long right?
i started up gpsgate b4 i ran telenav, its saying it has gps data coming in but no position..
im clueless..lol
liquidraven said:
well for some reason still it seems to be taking its time when looking for a route somewhere..it gets to 10% after 2 mins and 30% after 6 mins..it was working fast as hell yesterday and i dont think it should be taking that long right?
i started up gpsgate b4 i ran telenav, its saying it has gps data coming in but no position..
im clueless..lol
Click to expand...
Click to collapse
Just a question but do you have assisted Gps enabled? If so, disable it. If that doesnt fix it, maybe try GPSTest?
Related
Hey guys.
ive made a simple patch for the blue angel running windows mobile 5 where we got the error connection loss after loading any more than 200kb.
The patch I have made sorts this problem and one page for example that I now know that loads and didnt used to is Ebay, and buzzdev.
Simply insert this into the registry of the blueangel,, only for Windows Mobile 5.0.
U MUST let the registry flush before reseting the device. To do this press the power button to turn device off, wait 15 secs, turn back on and then soft reset.
Cheers.
s1nn0n
I have updated this, still seemed to throw up the error with v1.0, v1.1 seems fine 100% of the time.
OK, I feel like a bloody moron and a total newbie here! I have tried importing the regfile with PHM Registry Editor, but I can't seem to do it. Could you please tell me what you use?
1.1b is now up.
cache has been increased.
ill make a cab later to make it easier. this works fine for me now even over some pages tht still didnt quite seem to load fully in 1.1
Great, thanks! Maybe I can install it as well then... I was actually wondering why eBay wouldn't load while I was looking for some stuff in bed last night, but this explains it. Does this help on the pitiful speed of loading the pages as well? I don't think eBay and IMDB were that slow to load on the WM2003SE I used before. Or were they?
speed doesnt seem to bad to be honest. id say its equally comparable to 2003se.
ill get tht cab made up now.
ok here it is,
the cab as promised.
Thanks! But I don't know if I have done anything wrong. I try eBay's front page, and after a while I see "The page cannot be displayed og downloaded because the connection was lost. Check the connection and try again later." This is with WiFi. I installed the cab, turned the unit off for around 30 seconds and then soft reset it. Isn't that the way to do it with this WM5 ROM?
Edit: Sorry, I didn't get the part about turning the unit on again before the soft reset. Trying it now. (This ain't my day!)
Edit 2: Nope. Didn't work that way either. :?
Hmm... weird... first time I installed WM5: I had nooooooooo problmes using PIE with WiFi and "big" sites. Now, on my 2nd try with WM5 I have those problems.
I'll try the patch later and write down what's going on.
Heres another patch which is slightly updated, v1.2. It has the following changes:
1. Makes pages load faster having more connections per server.
2. The timeout time has been increased so that the page will load for longer and wait for the page to fully load before displaying the connection lost error.
3. Cache of ssl pages has been disabled.
Mastiff said:
Thanks! But I don't know if I have done anything wrong. I try eBay's front page, and after a while I see "The page cannot be displayed og downloaded because the connection was lost. Check the connection and try again later." This is with WiFi. I installed the cab, turned the unit off for around 30 seconds and then soft reset it. Isn't that the way to do it with this WM5 ROM?
Edit: Sorry, I didn't get the part about turning the unit on again before the soft reset. Trying it now. (This ain't my day!)
Edit 2: Nope. Didn't work that way either. :?
Click to expand...
Click to collapse
Mastiff: Please use the latest version and tell me how u get on...
I don't have that problem
I use the first patched version how about you?
Ye im using the first patched version...
Its weird why some users are having the problem and others are not...
Can u load ebay ok without applying my patch?
No. Sorry. I still get the message. Also I don't feel that this version is faster than the previuos. Weird! Do you use it on GPRS or on WiFi? I never surf on anything else than WiFi, maybe that's the thing?
s1nn0n said:
Ye im using the first patched version...
Its weird why some users are having the problem and others are not...
Can u load ebay ok without applying my patch?
Click to expand...
Click to collapse
That's the crazy thing: first time I installed WM5 on my PH20B1 BA, I had no problems with eBay and other much bigger sites... then I went back because of the performance to WM2003SE, had there the phone problem and several others, so I switched again to WM5 and NOW I have those problems with the PIE... First time I had the v1 WM5 and now the "v3" - that's the only difference. However, I'll try out that patch.
Mastiff said:
No. Sorry. I still get the message. Also I don't feel that this version is faster than the previuos. Weird! Do you use it on GPRS or on WiFi? I never surf on anything else than WiFi, maybe that's the thing?
Click to expand...
Click to collapse
Just loaded ebay.com with the craddle connection and didn't have any problem.. I used WiFi with other sites and never saw that problem... Tomorrow i can try loading it at a wifi connection
OK, I just tested. eBay works with the cradle, but not with WiFi.
I tested it over wifi and works fine.
No patch applied (only the 1st patched rom version)
I still can't see the buttons.. I guess we need the Hima's IE Registry
I have those problems w/ PIE since i have the patch 3 version from WM5, with the very first version i had no problems concering PIE and Wifi...
I'm starting to think that the problem is WiFi itself, not just surfing via WiFi: http://forum.xda-developers.com/viewtopic.php?t=29904
I have CID Unlocked my 8125 and upgraded numerous times. In my playing around with the roms and Cingular Ext Rom cabs i found an intersting abberation. No matter what Rom I use if I the cingular 1.08 extended Rom cabs and install them on my 8125 and Run one cab in particular. it is the Signed_gprsstall.cab.sa. Then I flash my radio ROM twice. I then have 4 bars of reception just about anywhere i go. For example on of our stores we normally get 0-1 bars of reception, but when i do the above mentioned process I get 4 bars at the cost of a little more battery power. But when i do this I cannot use the wifi. I click on the wifi icon in the connection manager and it thinks for a little bit then goes back to the icon with the x in it. Anyone got any ideas?? Like the extra power but want to use wifi.
barrydavisjr said:
I have CID Unlocked my 8125 and upgraded numerous times. In my playing around with the roms and Cingular Ext Rom cabs i found an intersting abberation. No matter what Rom I use if I the cingular 1.08 extended Rom cabs and install them on my 8125 and Run one cab in particular. it is the Signed_gprsstall.cab.sa. Then I flash my radio ROM twice. I then have 4 bars of reception just about anywhere i go. For example on of our stores we normally get 0-1 bars of reception, but when i do the above mentioned process I get 4 bars at the cost of a little more battery power. But when i do this I cannot use the wifi. I click on the wifi icon in the connection manager and it thinks for a little bit then goes back to the icon with the x in it. Anyone got any ideas?? Like the extra power but want to use wifi.
Click to expand...
Click to collapse
I seem to remember sumitter mentioning something about him leaving that particular cab out of his ROM's due to that WIFI issue...
Dr Puttingham said:
I seem to remember sumitter mentioning something about him leaving that particular cab out of his ROM's due to that WIFI issue...
Click to expand...
Click to collapse
I have been searching for days on wifi issues. I tell you the trade off is almost worth it. I find it very interseting quirk how the wifi doesn't work but the reception of the phone is increased. I wish i knew more about it to find out why it happens like that.
I don't use Wifi at all having unlimited data tariff, and the reception where I live is absolutely terrible- most of the time no signal at all.
Is it possible to install that cab and then uninstall it somehow without the hard reset? If I need to use wifi abroad etc.
Could someone please post it here?
rottie said:
I don't use Wifi at all having unlimited data tariff, and the reception where I live is absolutely terrible- most of the time no signal at all.
Is it possible to install that cab and then uninstall it somehow without the hard reset? If I need to use wifi abroad etc.
Could someone please post it here?
Click to expand...
Click to collapse
If you go to the FTP and go to wizard page and the Extended Rom. Look for the Cingular_8125_108EXTROM. download it and unzip it and look for the Signed_gprsstall.cab.sa. You will then have to falsh your radio twice. I reccomend Summiters 2.17 and then the wizard 2.25. I have not been able to figure out how to disable it through the registry. I don't know what settings that it is playing with. Each time i had to hard reset to remove the problem.
barrydavisjr said:
If you go to the FTP and go to wizard page and the Extended Rom. Look for the Cingular_8125_108EXTROM. download it and unzip it and look for the Signed_gprsstall.cab.sa. You will then have to falsh your radio twice. I reccomend Summiters 2.17 and then the wizard 2.25. I have not been able to figure out how to disable it through the registry. I don't know what settings that it is playing with. Each time i had to hard reset to remove the problem.
Click to expand...
Click to collapse
Too much hassle with hard reset and reinstalling everything...Can't be bothered then, even for improved reception...
Noone calls me anyway
rottie said:
Too much hassle with hard reset and reinstalling everything...Can't be bothered then, even for improved reception...
Noone calls me anyway
Click to expand...
Click to collapse
Drives me nuts. I never use wifi but i always want everything to work perfectly though.
I found the file that causes the conflict but have not been able to remove or correct it. When you install the gprsstall cab it installs a file rilgsm.dll. When i renamed it through the active sync for a brief moment the wifi appeared again until Windows automatically duplicated the file and put it back on.
ok peeps i upgraded my BA with this rom.
Helmi_BA_WM2k5_AKU3.5_v1.4.CF2 R2 by baniaczek
everything went without a hitch except i cant use internet explorer it opens but as soon as i try to navigate to a page even just google it shuts down.
any suggestions as to what is wrong? i tryed the search funtion and couldnt find what i was looking for
Have you correctly configured teh gprs or wifi settings?
have you tried opera browser?
I use both on my BA, also with the same rom as yours.
What i can see, is that you have one older radio, so, try to upgrade the radio.
Tried making Hard Reset?
Uziel said:
ok peeps i upgraded my BA with this rom.
Helmi_BA_WM2k5_AKU3.5_v1.4.CF2 R2 by baniaczek
everything went without a hitch except i cant use internet explorer it opens but as soon as i try to navigate to a page even just google it shuts down.
any suggestions as to what is wrong? i tryed the search funtion and couldnt find what i was looking for
Click to expand...
Click to collapse
I occasionally get this. Usually it happens when the network stack is messed up and can't get out anywhere, even though I'm connected to the house wireless.
Soft reset takes care of it. Occasionally, it takes a few of them, but it does clear the issue.
yeah updated radio to 1.15, tryed the hard rest.
think ill do a fresh instal with the Um.......? vanilla one unless someone has another one to try. recomend?
i do...
if you read through the thread of that rom, you will notice, that for some people (like me too), these problem occured...thats why baniaczek added an wifi driver update, and an other working in logout roms...one of them should work...and then your pocket ie won't be spoiled...
files listed here: http://forum.xda-developers.com/forumdisplay.php?f=273#
you should grab the Baniaczek_R2_Network_update.cab
and the tiacxwln_logout.cab
cheers
I've tried my gps in a load of places and the closest i've got my location to is 1500 m.....
I've done it alongside my friends N95 and he pretty much instantly got our location spot on with his google maps app, but my diamond couldnt get it.... left it for about 5 minutes before giving up!
Any help would be ace
Did you load the Almanach Data before?
e.g. Did you ever started QuickGPS before?
Have you clicked on the menu tab in google maps and clicked on the use gps button.
I havn't started quickGPS before, but yes, i did tick the use GPS button. It said searching for satelites in a small blue box at the top of the screen and then that disappeared.
I've never got a fixed location off of it letalone trying it at home, work, town, everywhere
Try the quick gps application first,it will help by getting the latest satelite information.
What version rom are you using.
Errrm, bit of a noob to the whole winmo scene, diamond is my first and i ony got that about a week ago....
How do you find out the rom version?
Also, another seperate question... is it worth updating ROM? I've been to the other forum and heard names like Bepe and stuff, but it doesnt mean anything...
boch501 said:
How do you find out the rom version?
Also, another seperate question... is it worth updating ROM?
Click to expand...
Click to collapse
Start > Settings > System tab > Device Information. Your ROM version is in there. If you have 1.35 or 1.37, then YES it is definitely worth updating. Whether you use a stock ROM or a cooked rom (like Bepe) is up to you.
I'm following this thread because I've had similar problems with GPS, even though I've already followed every advice I found when searching. It's not a high priority for me though. Anyway, I've played with both the Windows and Google GPS settings, every combination thereof, and everything else I can think of, but no real luck. At ONE point it was working, but then I flashed another ROM and never got it going again.
i got a ROM: 1.37.405.1
Radio 1.00.25.03
which means????
I had it working using the same ROM/radio versions as yours, AND I JUST GOT IT WORKING AGAIN! I know I tried this unsuccessfully since flashing 1.93, but this time it worked...
Leave the Windows GPS settings at default. In Google Maps GPS settings, set it manually to COM4 and 19200. Go outside, and tap Use GPS. It will say "initializing" for a while (give it time), and get a fix. After the first time it's slightly faster, but still seems pretty damn slow.
thanks, will try those settings tomorrow when it's slightly less cold, dark and rainy outside
cheers
--------------------------------------------------------------------------------
Well, after flashing like 150 roms so far, today i had this mysterious problem.
After flashing NRG's 6.5 ( with the new manilla rom ), i flashed into his new one, the 06/20, and then i flashed to duttys 3.9.
Now my gps simply wont work, i mean all the programs find it, but i get no signal whatsoever, not even one single satellite. What do you guys recommend to do ?
I will flash a stock rom now and see if that fixes anything.
PS : Flashing stock rom didnt do nothing.
Please someone help
GPS Problem
Hi
Try Start, settings, connections, connections, advanced, Select networks and set correct values in both dialogues!
What applicatons are you using for GPS?
I dont think the connection settings are completely relevant but make sure not in flight mode and that if you have entered SIM PIN that phone module is functioning, which I guess could be linked back to the operator settings, but GPS should still work regardless.
The stock settings for hardware should not need changing aa far as GPS is concerned.
If the above isn't any help, try hard reseting a few times (take out your storage card first though) as it could be due to some user customisation thing
jones2000 said:
Hi
Try Start, settings, connections, connections, advanced, Select networks and set correct values in both dialogues!
Click to expand...
Click to collapse
What does this has to do with my GPS ?
homer285 said:
What applicatons are you using for GPS?
I dont think the connection settings are completely relevant but make sure not in flight mode and that if you have a SIM PIN that phone module is functioning, which I guess could be linked back to the operator settings, but GPS should still work regardless.
Click to expand...
Click to collapse
Destinator 7 and igo8 mostly.
sedde said:
What does this has to do with my GPS ?
Destinator 7 and igo8 mostly.
Click to expand...
Click to collapse
Have you tried in igo8 goto the GPS settings, untick the box then let igo8 find the GPS by using the option?
Oh and we're assuming you have hardreset after flashing?
homer285 said:
Have you tried in igo8 goto the GPS settings, untick the box then let igo8 find the GPS by using the option?
Oh and we're assuming you have hardreset after flashing?
Click to expand...
Click to collapse
Ofc i did hard reset it, more than 2-3 times, and yes i have chosed to find gps automatically. Nothing does the trick, i think the module is broken.
First things first before checking it out with sofware like iGO
Have you tried the 'HTC GPS tool' ?
Remember if you just flashed then you do a complete coldboot of the GPS module.
So go outside and wait up till 10 minutes with the gps tool --> 'open port'
Let us know how that goes!
I don't main to sound patronising but have you downloaded latest info using QuickGPS??
Fallen Spartan said:
I don't main to sound patronising but have you downloaded latest info using QuickGPS??
Click to expand...
Click to collapse
You dont, yes ofc i did.
I have 2 htc hd's infront of me now, and one is picking sat's in 10 seconds and the other wont find even one.
Fallen Spartan said:
I don't main to sound patronising but have you downloaded latest info using QuickGPS??
Click to expand...
Click to collapse
Not to say that it wont work but I dont use that application and always get a pretty quick fix, 30-60 secs, even inside my house.
sedde said:
You dont, yes ofc i did.
I have 2 htc hd's infront of me now, and one is picking sat's in 10 seconds and the other wont find even one.
Click to expand...
Click to collapse
Damn that doesnt sound good, Id try everything from, flashing the ROM through RUU mode without SD inserted, reflash SPL and phone module, clean and format SD card. Also copy the iGO8 folder from the working device to the other SD card and run the .exe directly from location, just to be certain. Good luck.
Was a long shot, just checking all bases
It isnt a long shot
Ok now i am facing another problem.
How can i go back to 1.14 stock rom ? I just flashed it and i get the green screen..
PS : Nevermind i will restock the spl and use uspl, wont that do the trick ?
and what did 'HTC GPS tool' report?
lukesan said:
and what did 'HTC GPS tool' report?
Click to expand...
Click to collapse
if you can provide a .cab for it i will let you know, but i am currently preparing it to take it back to service.
PS : By flashing back to 1.14 and getting the green screen, all i had to do is reflash stock 1.14 spl ( just for knowing ).
Here you go
http://forum.xda-developers.com/showthread.php?p=3004081
lukesan said:
Here you go
http://forum.xda-developers.com/showthread.php?p=3004081
Click to expand...
Click to collapse
give me 5 mins to check it.
I hope the service guys wont give me a hard time fixing it or replacing it or i will be really sad to buy a new one
PS : No gps tool did nothing as well, no fix , not even a single satellite and after pressing the test button, it was resetting it after 5 seconds of testing it.
I am really sure its the module
just take it easy.
Sometimes it is best to let it, meaning yourself, rest a couple of hours to start troubleshooting again.
Wait atleast 10 minutes outside while it starts gathering information and preferably leave the Touch on a device that stands still, so not walking around
sedde said:
What does this has to do with my GPS ?
Destinator 7 and igo8 mostly.
Click to expand...
Click to collapse
Both Google maps and TomTom uses AGPS!
At least on my phone, that reduces connection time conciderably!!