hey guys im really sorry for creating this thread but I downloaded a .arm file to my comp and i synced to my tilt and my tilt wont open the file. how do i open a .arm file on my tilt? sorry for the n00b question. I searched google and no answer so i was hoping my fellow tilt brothers would help out a guy in the process of learning.
As far as I know .arm is not any format native to Windows Mobile / PPC applications.
Generally, when installing software on your device it will come in one of three forrmats:
1) .CAB file - This is like a specially designed zip file which you transfer to your device and run from your device. It contains all the information to install the files in the necessary locations, and generally also creates the proper shortcuts/icons.
2) .EXE file (PPC format) - This is an executable file for your PPC. It will only run on your PPC. If you try to run this from windows you will get an error (something like "not a valid win32 application"). This is what generally gets extracted from the .CAB file aboved and gets placed somewhere on your PPC.
3) .EXE file (Windows format) - This is a normal windows .EXE file and is generally a windows based installer for the program, much like a normal installation program for any Windows PC. When you run it, it often will place a .CAB file onto your device (or into the ActiveSync queue) to be installed. this type of EXE must be run from Windows XP/Vista itself and won't launch on the PPC directly.
If you are downloading a file different from the above from a vendor, they probably also provide instructions. I have not seen any program come in a format other than the above (unless they were also compressed with ZIP or RAR and needeed uncompressing first).
here is what the ext arm could mean
http://filext.com/file-extension/arm
but it could also be that you use some odd filemanager like file explore which dont show the right extentions and the file was called blabla.arm.cab
and explore is hiding the cab
use total commander
That does make sense. A lot of cabs for the arm architecture are called for example netcf.arm.cab. If you aren't using a good file explorer you are not gonna see the file extension. Do your note shoe note.pwi?
Are you sure it's .arm & not .amr? .amr is a media type file.
I find large file extension database here http://www.file-extensions.org
Related
is there an app for the alpine that lets you extract cab files from exe.files without using a pc
I think most of the .exe actually contain a Win32 installer, so I believe there is no realy way to extract the CAB from it, apart from running it on the PC.
However, most of the time you can get the CAB on the PC and install it without using ActiveSync. The Installer usually extracts the CAB to C:\Program Files\[Name of Software] or C:\Program Files\Microsoft ActiveSync\[Name of Software]. Grab it there and store it on your device, then install with CabInstaller for example.
Cheerio !
If you must go hardcore and decompress a cab on your phone, try it with a RAR decompresor. They open on the PC with winrar, but you'll lose file name & structure.
V
Sometimes the PC .exe file automatically deletes the CAB file from the PC & you won't be able to find it on the PC.
If you have an app that behaves like this, run the .exe on the PC & click on OK/Next until you get to the dialogue that asks you 'Install "AppName" using the default install directory?', just after you see the 'Retrieving Device Data' notification.
Now fire up Windows Explorer on the PC and search your \Program Files\ and \Program Files\Microsoft ActiveSync\ directories for your software developer's name. The CAB files should be inside this folder.
Note: All you need is the CAB file. If there is more than one, make sure you pick the correct Processor type ie .ARM for Himalaya or Alpine, not SH3 or MIPS. You don't need any .ini files either.
For a lot of program's i don't need a desktop to setup my PDA. But some programs like .net from microsoft, oziexplorer, citrix, resco-fileexplorer can only be installed from a windows-PC.
is there a way to extract or keep-from-a-temporary-space the .cab file that must be somewhere during the install.
wouldn't it be nice to totally rebuild your system with one button after flashing/testing a new ROM or after a empty-battery situation on holiday.
Strangely enough, this is exactly what I do. I stick to cab downloads where possible (keeping them on the SD) but there are ways to extract the cabs from the installer where there isn't one available. Theres a couple of ways you can:
1. Sometimes the installler is built on a zip and you can just open the exe in winzip. If you have winzip shell extensions installed you get an "open in winzip" option on the right-click menu.
2. If that doesn't work, run up the installer and proceed the the part where it copies it to the phone. There are two places you can find the cab. The first is on your PC in C:\Documents and Settings\username\Local Settings\Temp\. Sort by date to find the most recent file. The other place is on the phone itself...the installer actually copies the cab to the phone the installs it. I think you can find the cab in \Windows\AppMgr but it's been a while and that may be wrong.
some apps will put their cab on m$ activesync dir.
have u try sprite backup to backup ur system including storage.
Guy's,
thanks for your info. Got it complete in cab files on my storagecard now. Some i found in programfiles/activesync on the desktop. Sometimes it wasn't clear which cab file to use, so i started the install from the desktop. Then on the PDA when the question comes about where to install, then i started fileexplorer to see where the temporary cab file is. They all where in windows/appmgr/install.
thx,
xdaradar
when i install a cab and exe files, i use active sync, extract the file to a folder on my tilt, open it up with my tilt, and boo yah, its installed. not so with zip and xml files. when its either one of these, however i do the same steps as above except when i open it up on my tilt it connects to internet explorer, looks like it "installs", then i get a whole bunch of wording like this:
-<wap.provisioningdoc>
-<charaxteristic
type="install">
etc., etc., etc.
but i NEVER get the program. i see ppl posting opens and loads of various other things in zip and xml format, but i can not obtain these files. What am i doing wrong??
With zip files extract one level only. Normally the zip will extract to either a CAB or an EXE.
Most EXE's you run on the PC with the device AS connected.
CAB files move (unextracted) to the PPC either main or storage card and tap to run on the device.
Sometimes you get a combination of an XML and an EXE (eg Kaiser Tweak) where you move both files to the PPC into a folder and then run the EXE on the device. These are relatively rare - most exe's run on the PC.
If you continue to have problems it is best to give a specific example of the file type and software in question.
Mike
Whenever I install a program it appears to open a cab on my kaiser.
Rather than running the installers all the time on my laptop, is there a way to find those cabs and just move them to my storage card so I can install them if I am away from my laptop?
go to the installation folder on ur desktop and the cab would be in a folder in there. usually the folder marked 'installation files' or 'resources'..
just look for the cab file.
found some..
but not most ...
Very odd..
If you mean that when you run a .exe on your laptop to install a program on your kaiser, then it is possible to sometimes extract the cabs from the .exe or installer. A program called Universal Extractor can extract over 50 types of files including most installers. It is free, and supports many languages. It even adds an entry to the context menu, so you can right click nearly any file. It will then try to find the appropriate extracting tool, and then if it succeeds, it will place the files in a folder in the same directory as the original file. Try this, it has worked very well for me.
Dave
ParrotSquawk said:
but not most ...
Very odd..
Click to expand...
Click to collapse
If it helps, I tend to find most of them are in C:\Program Files\Microsoft ActiveSync
I have just bought a HTC Diamond. I am new to the world of Windows Mobile.
So far the phone is great! I love it.
I have noticed you can download lots of apps and tweaks.
I want just wondering how to instal these programs on the phone.
I have downloaded a few games, Unzipped and copied over the files to the phone. It recognioses one of the games with a '.cab' format and it installed, but the rest are .xml.
Any pointers, tips and hints for this phone?
Cheers
the program you use to extract compressed files identifies cab files as compressed. All you need to do is copy the cab files to your phone and run the file from there. If you try to extract a cab file, you'll get those xml files you talked about.
1. Copy cab to phone
2. Run cab from phone to install the program
good luck
elcom said:
1. Copy cab to phone
Click to expand...
Click to collapse
Hi - my first post!
You mention .cab files... I expect this applies to .exe's as well (for example, hot fixes)???
Any particular folder(s) on the phone we should be copying these files to before running them? I tried to install a hot fix today, but after running the .exe and receiving a 'success' message, the phone restarts OK, but the fix does not appear to have worked.
all exe install's for pocketpc's are pc exe files which have to be run
on the pc and then it use activesync to transfer the cab file to the
pocketpc and run it there
Rudegar said:
all exe install's for pocketpc's are pc exe files which have to be run
on the pc and then it use activesync to transfer the cab file to the
pocketpc and run it there
Click to expand...
Click to collapse
Thanks for the response.
Unfortunately, running the exe on my PC (Win Vista) doesn't seem to work.
Error: "{C:\filepath\filename.exe} is not a valid Win32 application."
Any ideas? I'm a complete newb at this so have exhausted my very limited list of possible ideas...
some people don't distribute their apps with installers so it could
just be the program itself
in which case you have to execute it on the pocketpc
this of cause mean that it will not put a shortcut to the exe
in your programs thats just something you have
to do manualy with a program like total commander
which you can also use to browse to where you put the
exe file and execute it to start the program
some people don't distribute their apps with installers so it could
just be the program itself
in which case you have to execute it on the pocketpc
this of cause mean that it will not put a shortcut to the exe
in your programs thats just something you have
to do manualy with a program like total commander
which you can also use to browse to where you put the
exe file and execute it to start the program
OK thanks - I already tried running the exe straight from my Diamond, and although it appeared to work correctly, the hotfix didn't actually fix what it claimed to. Not to worry, I'm still learning all this stuff (only had my Diamond for a day and a half now... ).