Hi,
I've searched the kaiser forum and found quite a few threads about wifi problems.
I got this problem as well and for my case, I found out that I lost wifi only when connecting to the PC. The reason is you can access the internet via usb connection to the PC and thus enabling wifi would probably make your kaiser become a router which should be avoided. So you won't have wifi while having usb connection to your PC.
Hope this can help solving some of the wifi issues. I've just got kaiser for 3 days now so this is as much as I've known.
cheers
somewhere in your activesync/windows mobile device center there should be an option to allow connections on the device when connecting to PC, my wifi works fine on my kaiser is connected to PC. or maybe thats not what ur askign for have trouble understanding your problem.(Does your PC lose the wifi or the device loses wifi)
It's the device that loses WiFi and I have also had this issue. If I disconnect the USB cable, WiFi becomes operational again.
ekw said:
somewhere in your activesync/windows mobile device center there should be an option to allow connections on the device when connecting to PC, my wifi works fine on my kaiser is connected to PC. or maybe thats not what ur askign for have trouble understanding your problem.(Does your PC lose the wifi or the device loses wifi)
Click to expand...
Click to collapse
I always lose wifi on Kaiser when Kaiser connects to PC. I don't know how to have wifi on Kaiser when the device connects to PC. As I explained, Kaiser should not have 2 connections to internet at the same time.
Can you have wifi on Kaiser working when it's connecting to PC?
Yes, you can
I don't know how to have wifi on Kaiser when the device connects to PC. As I explained, Kaiser should not have 2 connections to internet at the same time.
Can you have wifi on Kaiser working when it's connecting to PC?
Click to expand...
Click to collapse
Yes. Just check this box (open using File > Connection Settings):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
thanks mate, that bloody tick for activesync wasted at least 6 hours of my life.
Related
Hi there, I could really use some help.
I had to reset my T Mobile Vario III and now when I try and sync it up to my pc, it can't even connect.
I get a "found new hardware" wizard and if I run that, I get this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I can't see what the problem is as surely a hard reset takes it back to "just out of the box" condition? Therefore, I should be able to sync it up again as I did when I bought it......
......shouldn't I?
Any help most gratefully received.
BUMP
Anyone?
C'mon folks, I'm in pain here.
Just when I'd got it running nicely with some super progs and apps courtesy of my xda buddies, I did a hard reset for a particular reason and now I'm in PDA-limbo.
Everything else is working as per a regular hard reset, BTW.
So what's the prob? Do I need to download drivers or what?
The only thing I can think of is that the RNDIS driver on the PC has become corrupt or is missing.
All I can suggest is that you uninstall activesync from your PC, restart it and then re-install it if not with the very latest version which should be on the CD that came with your device. Restart your PC again and then and only then connect your VIII and see if the PC picks it up this time.
Good Luck and let us know your progress
C.
Thanks Stinkey, I'll try that when I get home (in the queue at the bank at the mo), hopefully it'll sort it out.
Either that or plug your sync cable into a different USB port, failing that (on yor PC whilst phone connected) go to Control panel, System, Hardware, Device manager and under Network adapters, uninstall the Windows Mobile-based device, then after that, unplug your phone then re-connect it. Try a PC restart if it does not connect after driver install.
Hope that works.
Thanks for the advice gents but sadly it's been to no avail.
Can anyone suggest a next approach?
BUMP.
Anybody able to help?
The fact that your PC is seeing your mobile as a different unit after a hard reset is a puzzle!
Are you using orig firmware or a cooked ROM?
Original.
Thinking about it, the problem didn't occur immediately after the reset.
I had it connected and synced up, then something happened - I can't remember what, either the pc timed out and went to standby or "the Mrs" had to log on to her side of the pc - and something got pi$$ed off along the line, hence these problems.
I'm thinking more that the pc is at fault somehow 'cos the Vario is working perfectly otherwise.
Then try a system restore to before the problem happened.
I have seen on other threads that one guy had a faulty usb cable and another had this problem when going thru a USB hub instead of direct to the PC.
Maybe the USB port you are using cannot supply enough current. The Kaiser starts to charge as soon as it connects and can drop out the USB port if it can't support it and this may start to happen at a later date if the USB port power supply circuit dies.
Hi Guys,
Long story short, I had an HTC Desire C, but somehow it got stuck in a hard brick (QDL/QHSUSB_DLOAD)... so I decided to look on ebay and find a phone with a broken screen to swap out the boards (since I still had a functional screen). I won an auction for two HTC Desire C's with broken screens/cases, but one of them was also stuck in this QDL Brick. So now I have two HTC Desire C's stuck in QDL Download Mode and one that works. So while I've solved the problem (I have one phone that works), before I consign the other two phones to silicon heaven, I was wondering if anyone has had any success getting out of this kind of brick? I did a lot of google-type research and the furthest I had gone was to connect the phone to QPST... which is moot because I have no files to upload to it.
*edit* I connected the good phone to QPST... but tbh I don't have a lot of experience with it and so yah... fiddling but no success.
In case I am not clear and for those of you unfamiliar with what I mean by QDL brick, essentially the phone does not power on (no matter what kind of button combination, fully charged, plugged in, 30 seconds, etc) and when connected by USB is recognised as a Qualcomm device in QDL Download mode. Here is an lsusb printout from Linux of the phone when connected.
Bus 003 Device 003: ID 05c6:9008 Qualcomm, Inc. Gobi Wireless Modem (QDL mode)
Click to expand...
Click to collapse
And here is a picture of what I get in QPST when I connect one of them to my computer.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If anyone has any suggestions, even if to say that the phones are dead bricks, please let me know. I imagine to fix this using QPST I need files (google qpst QHSUSB_DLOAD, I can't post links since I am a new account), but I have been unable to figure anything out... The other solution I thought was to use backup/restore functions in QPST to transfer good configurations from the working phone to those bricked... but I don't know if this would work and I have not been able to connect the good phone to QPST.
Thanks.
I have a Verizon MOTO X 2014 32GB working almost fine, only that it doesn't get recognised when plugged into a computer. No sound, nothing except that it somehow still charges either plugged into a charger or a computer via USB but never gets recognised like MTP or PTP or whatever, just charging only. I've searched everywhere to see if anyone else has seen this issue before and if there's a fix for it before posting this here. Any suggestions would be welcome.
Thanks.
ezeuba said:
I have a Verizon MOTO X 2014 32GB working almost fine, only that it doesn't get recognised when plugged into a computer. No sound, nothing except that it somehow still charges either plugged into a charger or a computer via USB but never gets recognised like MTP or PTP or whatever, just charging only. I've searched everywhere to see if anyone else has seen this issue before and if there's a fix for it before posting this here. Any suggestions would be welcome.
Thanks.
Click to expand...
Click to collapse
Did you try tapping the 'Charging only' displayed in a notification when you connect USB cable to PC(if you're running MM). If its not the case then maybe try replacing your Data Cable, as it may also be the culprit
hamzaalijoiyah said:
Did you try tapping the 'Charging only' displayed in a notification when you connect USB cable to PC(if you're running MM). If its not the case then maybe try replacing your Data Cable, as it may also be the culprit
Click to expand...
Click to collapse
Running Lollipop 5.1 and I've tried everything that can be done from any setting on the phone. I have also tried several USB cables with no luck yet. Thanks.
Have you tried changing it to MTP under developer options?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Under developer options,
Please where exactly is this setting located in Developer Options? I can't find anything related to it in mine. Thanks.
Just realized you were running v5.1
Try this:
To enable USB file transfer go to “Settings” > “Storage” > Tap on the three vertical dots in the top-right corner of your screen > “USB computer connection” > Tick the box next to “Media device (MTP)
I just got an LG V40 on T-Mobile. I have a 2015 MacBook Pro on Mojave that i had no problem using Android File Transfer with my Note8 or my LG G7. I cannot seem to get my V40 to connect to the MacBook Pro to transfer data via USB. Is there a good free alternative to Android File Transfer, or does anybody know the right way to get them to connect. I've tried all the troubleshooting steps on the AFT site that I've found.
SHAREit seems to work pretty well. I don't have any Apple products but I'm able to transfer files with coworkers that do.
Retarded Timing said:
SHAREit seems to work pretty well. I don't have any Apple products but I'm able to transfer files with coworkers that do.
Click to expand...
Click to collapse
via USB?
Android File Transfer is working just fine for me. I also have the 2015 MB Pro 13", on Mojave 10.41.1.
Was also functioning fine on my previous phone, an LG G6.
Have you tried uninstalling, then reinstalling AFT?
Does your V40 connect fine to a Windows PC?
Tried different USB ports or cables?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I've tried several different cables. It connects just fine to my surface book. I've uninstalled/reinstalled AFT multiple times. Installed the LG Driver. Wiped the phone. The computer will see the phone just not as a drive. It's like AFT is the only thing that can't see it
https://goo.gl/vuySSi
hotsauce32 said:
Android File Transfer is working just fine for me. I also have the 2015 MB Pro 13", on Mojave 10.41.1.
Was also functioning fine on my previous phone, an LG G6.
Have you tried uninstalling, then reinstalling AFT?
Does your V40 connect fine to a Windows PC?
Tried different USB ports or cables?
Click to expand...
Click to collapse
What settings do you have checked in developer mode? I've tried with Debugging on and off, MTP and PTP. I keep getting this feeling that i'm missing something.
thelungmeister said:
What settings do you have checked in developer mode? I've tried with Debugging on and off, MTP and PTP. I keep getting this feeling that i'm missing something.
Click to expand...
Click to collapse
I actually forgot to even activate developer mode when I first got the phone a few weeks ago, so all settings there are untouched
hotsauce32 said:
I actually forgot to even activate developer mode when I first got the phone a few weeks ago, so all settings there are untouched
Click to expand...
Click to collapse
See... Dammit.... I knew this was an apple issue... Lol
When connecting my smartphone to the USB ports the operating system is simply not mounting the device. It is an infinite assembly / disassembly cycle.
the behavior is repeated both in Windows 10 and in endless operating systems. My device is a Xiaomi redmi note 10 pro
Did you tab on Usb connection notification and choose "File transfer" ?
Abdullah.Csit said:
Did you tab on Usb connection notification and choose "File transfer" ?
Click to expand...
Click to collapse
yes i did it, i even tried it with 2 other xiaomi phones.
on other computers it works normally.
only on Acer AN515-43 that does not.
I’ve already spoken with Acer support, but they don’t know what’s going on.
Artlux said:
yes i did it, i even tried it with 2 other xiaomi phones.
on other computers it works normally.
only on Acer AN515-43 that does not.
Click to expand...
Click to collapse
Did you reinstalled USB Drives and install latest one.
otherwise try to use another PC.
when it's happening to me always try another PC and works.
I solved my USB connections problem by using Stock Windows 10 without any mod or custom builds...
Good luck with it
the cell looks like this
- YouTube
Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.
youtube.com
Faulty cable maybe? Test it on another pc/another cable..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I tried with other cables on a Lenovo notebook, and it worked normally, both with the original cable and with a common type-c cable.
Artlux said:
View attachment 5306171
I tried with other cables on a Lenovo notebook, and it worked normally, both with the original cable and with a common type-c cable.
Click to expand...
Click to collapse
I would try then;
1. Check for updated drivers from Windows Update
2. If not, try updating drivers with snappy tool;
https://sdi-tool.org/download/ (sdi lite)
3. If still not, backup ur personal laptop data and clean install win10
I tried these three options, but I still have the same problem.