Ok this I know is going to be a dumb question, but here it goes. First a little information. I am not new to computers and have updated my Tilt before. I am wanting up flash my phone to a newer radio, then maybe Duttys new WM6.1 Hybrid. I have installed "XDA-Developers HTC Kaiser HardSPL CID Unlocker v1.0"
Installed no issues. This is where I get stuck, I have looked for the WIKI pages, but to no joy. Please can someone give me a step-by-step Wiki or some information so I don't brick my tilt. I have completed a back-up. Thanks for all the help.
Below is my phone information:
Rom Version: 1.62.502.0
Rom Date: 1/17/08
Radio Version: 1.27.14.09
Protocol Version: 22.45.88.07H
http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser#ROMx20.Upgrading
read through questions 1 through 6
Related
Yesterday I downgrade my G3 with the TMO Image 12-2005. Just for testing the BB-Client for Instantemail. And since that it isn't possible to update the wizard.
If tried different ROMs. It is allways the same issue. The Updateprozess goes completely through without an error. But only the Splash and the Extended Rom will be upgraded successfully. The Radio and OS still stands on the old version.
Last I tried the actual Molski ROM (RUU_Molski.Biz_AKU2.3-226102_22610105_024711_WWE-30MB-CF2.exe) and have now this device Information:
ROM : 2.24.10.1 WWE
ROM date: 4/17/06
Radio: 02.25.11
Protocoll: 4.1.13.12
ExtRom: 2.26.10.2 Molski.Biz
The Update Utility allways shows the Image Version 1.2.0.0
It's enough to drive me to despair. Hope you can help me!
http://forum.xda-developers.com/showthread.php?t=263116
Follow the instructions. Run the 1.05 a second time if your SPL doesn't downgrade to 1.x
Good luck
it works - thanks a lot for the link
I am trying to install the PDAMobiz Wizard Crossbow_AKU 3 for G3, I have ungraded from cingular 8125 OEM 2.25 to RUU Molski Biz 226102_22610105_022511_WWE. So my question is on the splash screen (boot up) the info are as follows:
IPL 2.26
SPL 2.26
GSM 2.47.11
OS: 1.5.4.2
WHY is that?
In device Info:
ROM Ver 1.5.4.2 WWE
Rom date: 11/08/05
Radio version: 02.47.11
Protocol version: 4.1.13.24
Ext Rom Version: 2.26.10.2 Molski.Biz.
I can't upgrade to the pdamobiz 3.0 rom? I know it is cid unlock I make sure to run the enable rapi every time i did the upgrade reboot then do the upgrade. I don't know why I can't do it. I did the upgrade fine to pdamobiz 3.0rom for my friends mda. 2 of them to be exact. Help Please. I'm going crazy. Thanks
ok now just flash your phone with an original HTC rom. go get it from there website. now flash that, once you do that....IT WILL NOT lock your phone up. so you dont have to worry about that. and once you flash it with the original rom then you can just flash it to any wizard rom your little heart will be content with. and i learned all this from reading and searching here on XDA.
Hi,
currently that's what I found in my Device info section:
ROM version:11.0.0.0 WWE
ROM date: 9/30/07
Radio Version: 2.07.10
Protocol Version: 413.1.03
ExtROM version: TNT series by its right
under About in the Version tab I see:
CE OS 5.2.1921(Build 18521.0.7.0)TNT
I burned this ROM about a year ago and I want to burn to another ROM.
As I recall I have a G4 device.
can someone help me please?
Well
it seems you have a device g4 on hard or soft spl?
check the IPL and SPL info And repost it please if it is Soft spl you spl must shows X.XX.0001
but... if your device is hardSPL your spl info shows you X.XX.Olip
Please confirm this and... be sure to read the upgrade method for G4 devices
and when you re done... check this out
http://forum.xda-developers.com/showthread.php?t=427328
I have HTC TyTN II
Sys info:
ROM Memory Ver.: 1.83.464.0 PLK
ROM Memory Date: 08/28/07
Radio Ver. : 1.27.12.11
Procole Ver. : 22.45.88.07W
My Kaiser works on every SimCard in my country, so simlock is unlocked.
Question:
Should i instal HardSPL before flashing?
Question:
How to check that someone before me installed HardSPL or something else to remove simlock?
I found out bootloader and get some info:
KAIS130 MFG
SPL-1.0.OliPof
CPLD-8
Still question: Should i instal HardSPL before flashing? I want to flash HyperDragon III ROM
You need to read the wiki - The clue is in your bootloader info that you've posted
Don't flash anything until you understand what you are doing and know what information you're looking for.
Your device is already HARD_SPLed, meaning: you can flash any ROM!
However,
Mikeapollo is right, you do have to do some reading first, so, that you won't screw up your device! Start here (scroll down to ROM UPGRADING). I hope that gets you started?
I searched, read the wiki, read the noob file, but cant seem to figure out if ..
Flashing HardSPL will "reset" my phone (Tilt)?
I managed to update the ROM and the Radio without HardSPL, but would like to be ready for the next time by having HardSPL on the phone.
Will installing HardSPL_and_CidUnlocker.zip reset my phone to "factory" settings or just replace the current SPL and leave the rest of my phone as is?
Thanks,
Phone: Tilt /ATT
ROM version: 3.570502.2 WWE
ROM date: 07/17/08
Radio version: 1.65.21.18
Protocol version: 25.88.40.0SH
Flashing HardSPL or CID unlocking will not affect your current installation of Windows Mobile, so don't worry about losing your data from performing either of those unlocks.