Database Develop

HTC TyTNII Button 5 not working

Hi all,
Just got my TyTNII yesterday to replace old O2 Zinc.
Everything was good, until i found out the button 5 (originally assigned for program camera) doesn't work.
I try to assign button 5 another program but it just doesn't work and when i reassigned button 6 for camera, button 6 works fine.
Everytime i press button 5, the response given is backlight will turn on, button 1 to 4 light will also turn on. but just that, the program assigned doesn't run.
I really don't hope to bring it to Service Center, as in my country, for PDA, even we claim in the same day we purchase, we won't get any replacement, and it will take one month (more) to return and sometimes just to let u know they didn't do anything. My previous O2 Zinc was also the second unit.
Help me please.

Keep it assigned to camera, but keep pressed a little longer to lunch the camera.

Hey I got my TyTN II yesterday, quite excited about the device. But I have the exact same issue. Did anyone else run into this problem? And any solutions for it, or should I ask for an exchange? Help please.

Ths button is a dual mode button for the camera. Light press to autofocus then deep press to fire.
If you re-assign it you need to press deeply to activate

Thanks for the reply, that was silly of me just figured it out.

Thanks for the reply.

My kaiser died after flash :(

Hi. I tried to flash my kaiser to new Dutty's wm 6.1 rom (had Dutty's v3 before so i had hardSPL) and after the rom update process completed my kaiser died , screen is always black no matter i connect it to charger or push power, is there any possibility to bring my phone back 2 life?

Have you taken the battery out?

Have you tried flashing from SD card?
http://forum.xda-developers.com/showthread.php?t=336158&highlight=flash+from+card
Worked for mine when i bricked it.

i have taken battery out , it wont help. also flashing from sd card works only when u can actually power on the device and i cant do it. name of my rom wasnt RUU_signed.nbh it was : Ruu_Signed_Duttys_WM6.1_5.2.19716_1.64.08.21.nbh maybe thats the reason of error

Well did you try the special key sequence to try to turn it on?

special key sequence? U mean both softkeys and stylus into reset hole?

Can you get it to the HSPL screen?
hold camera button and stylus into reset hole?
If you can to there you can reflash it using the sc card method.

3. Plug the card into the phone, then enter boot loader mode by pressing down the Power and Camera buttons simultaneously, and using the stylus at the same time to press the RESET button at the left side. Continue pressing the two buttons for a few seconds after pressing and releasing the reset button until the bootloader screen appears. (taken from Wiki)
Click to expand...
Click to collapse
not the soft keys

thanx but it wont work, if i could enter bootloader i would just reflash the rom, but i cant get my phone on, screen is all the time black. if i plug in a charger there is no charging led too.

Ok, so your saying you tried it and it doesn't work?

im saying this doesnt work because my phone is totally dead. i cant get any response, it just wont turn on.

ok I'm taking it that you didn't try that sequence because you won't say that you tried it.

Hell no he/she ain't tried it. Probably has no idea what you are telling him to do.

Well Belizibub told him, I just started reading between the lines and noticed that he never admitted to trying it.
I love your avatar Tater.

can't all read, he can't turn it on, so how is he suppose to enter the bootloader or flash it from the sd card.

how come i try to enter bootloader , the phone is D E A D, it doesnt respond on any key cominations. i cant see even blank screen, nothing, it just wont turn on.

take the battery out and plug it into the charger, if a red light comes on thats a good thing if not then you probably have whats known as a "bricked kaiser" and sent it in for repairs or go buy a new one and save that one for parts.

marcini said:
can't all read, he can't turn it on, so how is he suppose to enter the bootloader or flash it from the sd card.
Click to expand...
Click to collapse
LOL, not even worth it.

So let me ask this, Why was this thread started? Was someone seeking help? Has someone provided the possibility of help? Do you think that the devils friend didn't understand that to this requester of help, that his phone appeared to be dead? Or is it possible the Devils right hand man knows something that the requester of help doesn't know and kindly attempted to share it with him, just to have the secret unlock code ignored.
Try up up down down left right left right a b select start.
That will fix your phone.
ps, what I'm getting at is if you haven't tried it then you need to try it. The special key config could possibly turn the phone on for you.

OK, now I see this same conversation going on in 2 different forums by the same person. Here and in Dutty's latest 6.1 release.
I noticed you are an Orange user. I have seen Multiple Orange users trying to flash radios to their phone and locking them up. I suggest looking/searching for one of those threads and see if they have a solution.

Tilt turns off right after pressing power button?

I don't know if it's just the rom i'm using but i've noticed that 80% of times when I press the power button to take my phone out of sleep, it turns on and then goes off about half a second later, and I have to press it again to keep it on.. is this a known bug?

It's not just you
I've been seeing the same behavior with mine, and I'm running the stock ROM.

Same issue here ever since flashing stock WM 6.1 ROM.

You all are not alone...
I couldn't find the thread after a quick search, but this is a known issue of the phone, not the customized roms. About 5 or 6 months ago, i read a post saying that HTC was trying to figure out a solution. Perhaps someone will post a better reply than mine.

I have this exact same issue.... I am using the stock 6.0 rom still (don't laugh)... It also does it when I receive a TXT message (and it is sleeping) and anything else that would normally power it on from sleep mode... I am glad to see that I am not the only one experiancing this....
My phone did not always do this... but has been for quite some time.... If I am not mistaken, it was after one of my "ravamps" of the phone... more specifically, I applied a reg edit so I coudl reprogram the PTT button... Any of the rest of you do this? I changed the PTT so on a short push it does Voice command, and long press it loads TomTom (in my mind, PTT is a french button "Pour TomTom" lol).. Anyways... Let me know folks

Stock ROM. Same problem.

I think the problem is in "device lock" plugin on today screen.
After I disabled that plugin and stopped using it- it stopped to flash the screen.
Is it the same with other devices?

I've never used the device lock today plugin and I have always had this issue. 6.1 stock rom.

[Q] hardware buttons problem

hi,
My hardware buttons are dying. My end call button is not responding at all anymore.
Testing them with NavDbgTool.exe I found that the touch capability of the surface around the end call button is not working.
Is there any connection with the touch to make the action of the button?
Does any of you have the same problem?
Attached find the testing tools.

same end call button problem
I am having the same prob with end call button not working on my HTC Diamond Touch. I'm using Duttys V4 ROM. did u find a fix?

I've had a worse problem..
my volume up key was sticking to the point were the phone was unusable. Rang Orange as the phone is 9 months old to be told that i'll have to send it to HTC as Orange only do a 6 month warranty?
and here's the stinger, rang HTC who told me they'd collect the phone, they have now sent me a quote for £216 to fix the phone with a new motherboard after they said I've illegally tried to install a firewall. Thing is although installed a few custom roms before reverting back to the stock orange rom I've no idea what they mean by the firewall?? i've not to my knowledge installed any firewall software on the device?? - and to top it off, if I don't want them to do the repairs i've gotta pay £14 to get the bloody thing back!!
not a happy HTC camper

help with problem

hi guyz
ive a AT&T Tilt (Kaiser 100). so ive flashed my kaiser loads of times no problem was running great until now when i unlocked it the PPT button and call program open up themselves and some ramdon keys such as E,D,C,etc are pressed!!
also the slide keypad stops responding but the lights are still on for it. the navigational buttons on screen side stop working and the start menu opens up by pressing the button in the middle of navigational buttons!! rest of the keys dont work. power and camera keys still work!
i gave my phone a rest for 4 hours and when i turned it on it started working fine and then again after 5 minutes of use same problem. sometimes in the middle of use it automatically starts working again fine and then same problem comes and this keeps going on!!!
one of my workers at the office mishandled my phone (i think) he couldn't figure out how to slide open the phone and tried everything
so i cant rule out if its hardware or software problem???
please help!!

Hard reset your device and see if that solves the problem.

lol clown wats with u and hard resets? anyway yea try a hard reset or flash a new rom mabye

jsngrimm said:
lol clown wats with u and hard resets? anyway yea try a hard reset or flash a new rom mabye
Click to expand...
Click to collapse
Because sometimes...well most of the times, with a help thread request like yours are solved with a hard reset . Going by the book...(oohh and it was late last night by the way )
On another note, seems like your friend did mess some of your keys and probably hardware issue. Try and mess with some keys and see if they are not stuck.

In most situations it quicker and easier to reset the phone. Just thnk about it, you don't have the original OS to repair with and you don't really have a method of sending commands to the phone.