Hi all,
I recently instaled WM 6.1 on my Kaiser. Except from some good things there are some bad ones. The worst one is a problem with GPS.
Software I use (IGo and Google Maps) can not detect GPS device.
Any solutions to this problem?
Thanks in advance for any help,
Mike
Need more details......
mnowakowski said:
Hi all,
I recently instaled WM 6.1 on my Kaiser. Except from some good things there are some bad ones. The worst one is a problem with GPS.
Software I use (IGo and Google Maps) can not detect GPS device.
Any solutions to this problem?
Thanks in advance for any help,
Mike
Click to expand...
Click to collapse
What ROM did you install? Does it or do you have QuickGPS or SeaSGEE installed? What device do you have?
mnowakowski said:
Hi all,
I recently instaled WM 6.1 on my Kaiser. Except from some good things there are some bad ones. The worst one is a problem with GPS.
Software I use (IGo and Google Maps) can not detect GPS device.
Any solutions to this problem?
Thanks in advance for any help,
Mike
Click to expand...
Click to collapse
Some ROMs and Radios have compatibility issues.
Quite possibly, it could be GpsGate if you have it output GPS data on the wrong port.
If you have GpsGate, uninstall it, soft reset the phone, and try again.
If you GpsGate isn't the issue, go to Settings -> Connections -> External GPS
and make sure you have "GPS program port" set to COM4.
Come to think of it, my GPS isn't working either Looks like I'm having the same problem as you.
I just solved it right now by doing a hard reset.
Sorry it took mie so long to asnwer but I was out on a trip with no access to info you guys asked for to help me solve my problem,
My device is HTC TyTN II Kaiser, bought not through some GSM company but with oryginal HTC setup (prior to this unlucky upgrade I made).
From Settings -> device information i can read the following info:
ROM version 3.03.405.0 WWE
ROM date 01/08/08
radio version 1.64.06.04
protocol version 25.70.40.02W
I did try to set the external GPS port in
Settings -> sytem -> external GPS (i have it here not in system -> connections)
i used the following settings
I used GPS program port: com4
GPS hardware port: none (when i try to set it to com0 or com1 it just gets changed to none once i close and reopen then window. baud rate 4800
access - anabled manage GPS automaticaly.
I do hope info you guys now have will make it possible for you to sugest some easy way to overcome this problem.
BTW - problem is that tom tom or i-go just do not detect GPS device.
as a supporting software I have Quick GPS which works ok - it downloads latest satelite data with out major problems.
Thanks for help in advance,
Mike
mnowakowski said:
as a supporting software I have Quick GPS which works ok - it downloads latest satelite data with out major problems.
Thanks for help in advance,
Mike
Click to expand...
Click to collapse
than there has to be something wrong w/ settings somewhere. if u had a faulty gps reciever than quickgps wouldn't work either.
try a hard reset and reinstall the nav programs.
mnowakowski said:
Hi all,
I recently instaled WM 6.1 on my Kaiser. Except from some good things there are some bad ones. The worst one is a problem with GPS.
Software I use (IGo and Google Maps) can not detect GPS device.
Any solutions to this problem?
Thanks in advance for any help,
Mike
Click to expand...
Click to collapse
Hi, I had the same problem but with TomTom Navigator on a Kaiser. I tried all setting possibilities but nothing helped. After a hard reset, it was OK with automatic settings, nothing to change. Hope it helps.
hmm i've used both tomtom and igo and havent had any problems...try disabling agps
Thx guys,
Not sure why I did not try it before but after your sugestions I just set all the settings to factory and it started working for both software.
I feel a bit stupid, sorry to waste your time and thx for help,
Mike
Related
Hi,
I can't GPS signal no matter what I try. I didn't change any default settings in External GPS.
I've installed TomTom and Google maps but neither application is seeing GPS device. In TomTom I get no valid GPS signal and in Google Maps I get not able to initialise the GPS. I've tried using both of the appications with clear view of the sky and left the phone for about 30mins to try and find the satelites.
Any ideas?
I'm thinking I'm having a faulty device but I don't want to replace it just in case I get the new one with SOD problem.
Thanks for any help.
Dt11
at the moment i got the same problem! I can't get it running. The yellow LED is on but there is now signal! Pls help us...
(PS: GpsViewer does not work)
Geko
Try Autodetect of GPS ports maybe the settings were accidentally changed
darkilici said:
Try Autodetect of GPS ports maybe the settings were accidentally changed
Click to expand...
Click to collapse
From Com1 to Com11 open failed or None
hmmm
Did you change something on the "External GPS" setting?
If yes, then I think you need to hard-reset.
gogol said:
Did you change something on the "External GPS" setting?
If yes, then I think you need to hard-reset.
Click to expand...
Click to collapse
I thought your going to ask this Yes I did once...
Hmm ok i save all my things and then lets try...
Grrr. Why is Htc is not able to get this work without hard resest?
Geko
Yeah, HTC should improve that one.
The hard-reset thing is described here:
http://forum.xda-developers.com/showthread.php?t=330235
ok thx now it does work....
So dt11 you have to do the same otherwise it wont work...
Geko
Stupid question, but hard reset = soft reset but holding down the 2 soft keys as well yar?
There was a discussion of this in some previous threads, based on which I installed the GPS Viewer and after activating GPS with that (com 4, 4800 baud) Google maps worked very well. No need for a hard, rest, please search the previous topics in GPS and Kaiser
[COM4 / 4800 baud] are the default settings aren't they? I think i've tried those before :S
michalopoulosgk said:
There was a discussion of this in some previous threads, based on which I installed the GPS Viewer and after activating GPS with that (com 4, 4800 baud) Google maps worked very well. No need for a hard, rest, please search the previous topics in GPS and Kaiser
Click to expand...
Click to collapse
hmm this solution didn't work on my Kaiser...
Geko
Question:
Does someone have the "GPSmeter Professional Edition" running?
If i do install this app and run, it's over with the built in GPS so
don't install this app i always got problem with this one...
Can someone else confirm?
Geko
i couldnt get google maps or windows live to work without first running gpsviewer but when my new copy of tomtom navigator 6 (the trial didnt come with my phone) i did a clear storage which takes the phone back to its factory settings and then tomtom work super fast and very accurate in all kinds of weather without having to install a "jumpstart" software.
the way the GPS seems to work is you need a app that will start the GPS for you hence why most HTC bought Kaisers come with tomtom once you start tomtom hit the ok button and then start google maps or Live maps and GPS will work. there also is an app called GPSViewer i believe that will also start the GPS for you. I dont think anyone has gotten Google maps to start the GPS by itself?
austinsnyc said:
I dont think anyone has gotten Google maps to start the GPS by itself?
Click to expand...
Click to collapse
Some people have reported that they have but I always seem to need to give it a boost. I use GpsViewer and that always seems to get Google Maps started okay.
Cheers.
All working now. I had to do a hard reset.
It has been said so many times but it won't hurt to repeat it:
WARNING: Don't touch any settings in "External GPS"!!! Otherwise your GPS will not work and you will have you hard reset you phone!
FWIW, I did not have to jump start my GPS in my 8925 with the default ATT ROM. Once I replaced it with the HTC ROM, I now have to jump start it. So it appears whatever the problem is, it's fixable via software.
Hi all, yesterday i've changed the "external gps settings":
COM8 For virtual GPS port and COM 4 as Hardware GPS port, baud 9600.
Today i was using my GPS the first time after the settings descripted before...
The GPS Works, but at regular intervals of 2 sec, then stops for 10 sec (No GPS Found with Tomtom) and works again.....
Now i have 3 questions:
1) Can i solve this WITHOUT an Hard Reset??
2) If i disable the Virtual com port, tomtom DON'T let me choose another COMport (it skips the Comport configuration page) and, when it allows me to select the right port, the COM4 isn't there
3) There are A LOT of comport into "External GPS Settings", some starting with COM..X and others ports named GPD..X ..... What type of ports are??
(Ps: i have already installed tomtom again)
Did you try to disable AGPS?
I have only seen this problem when AGPS is enabled (via advanced config) too
Also the defualt GPS COM ports is 4 and baud rate of 4800 (should be no need to change this) and why mess with external GPS settings when the device has internal GPS?
I have same problem on iGO8 with AGPS enabled.
You guys are right! The A-GPS was ON (strange, i don't remember i've activated it)
If i play with the external gps app is because i would to share the same com port to 2 gps apps.....
BTW when i set the com4 in Hardware port, reopening the app it disappear.
Now i have Agps disabled, External gps app "void" and tomtom don't let me choose the comport (it switch from baud speed to mainscreen)
Hmm, I had no problem at all using GPS at standard settings for:
Igo
TrackMe
GoogleMaps
at the same time!
Riel said:
Hmm, I had no problem at all using GPS at standard settings for:
Igo
TrackMe
GoogleMaps
at the same time!
Click to expand...
Click to collapse
diamond has disabled agps out of the box.
Hmmm I had no problems the first couple of times I tried iGo when I first got the device. Then I tweaked it, enabled AGPS and all hell broke loose (presumably due to this setting, though not 100% sure since I changed lots of things). Disabled it on my own, trying to back-track, now it's better but I still got problems with GPS lost...
By the way, is there any use setting COM4 to high speeds? Does it reall improve performance?
I had the same problem after flashing the actual rom build from HTC club. I am currently sticking to this one in italian and no problem at all.
P.S.: Just noticed you're from my same city
All ok now, i suppose that if we leave blank the GPS port (no HW port) into first COM screen of external gps app, tomtom skip the comport settings screen, and don't allow you to choose another one.
I've Hardresetted my pda yesterday, and i've seen that out of the box, the diamond has COM4 selected by default.
I don't want to change anything now (i have no time in those days to do another Hard reset) BUT, if you have problems regarding the GPS COM Settings screen in tomtom, try to set the COM4 into GPS PORT (not hardware port) of the "External Gps" app.
hello everyone
i have the same problem of signal GPS lost and coming back after a few minutes of use (i use IGO 8), then lose again, then back again, and so on.
I installed the new flash rom from HTC eclub, (QMR-RUU_Diamond_HTC_FRA_1.93.406.1_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship.exe)
Even if i disable the a-gps using advance config, the problem is still there.
Do you think that problem comes from that new HTC ROM ?
Any solutions?
NO... I had the same problem on old ROM very rarely and solved with Quick GPS , I will see if the problem persist on new ROM...
I had this disconnecting problem too with Tomtom 7,
now with Bepe 0.98 and radio Radio v1.00.25.07, all is OK, no disconnect at all this morning ( 2 hours of GPS use ).
But I don't know what resolve the problem, Bepe's ROM or the new .07 radio
my diamond refuse to accept setting for hardware port and rate......
it always displayed the default (hardware none ,,port 4800)
and always intermittent gps signal...
can u help me?
hmh79 said:
my diamond refuse to accept setting for hardware port and rate......
it always displayed the default (hardware none ,,port 4800)
and always intermittent gps signal...
can u help me?
Click to expand...
Click to collapse
Never mind the setting. Is AGPS disabled?
yes its disabled...
A bit strange, mine works perfectly with iGo, it even updates the position (almost) continuously when in pedestrian mode.
Perhaps you could try an auto detect from your GPS program to reset the link. By the way, what soft are you using?
well im using garmin xt and navigon...garmin display that the program and hardware is com:4
thank u for being patient with me....
I know Garmin works on the Diamond, so I'm running out of ideas... I remember reading that some VOIP programs screw the GPS. Did you install any such program?
If not, what I would do is back up my contacts and calendar and do a hard reset to see if this solves the problem. A bit painful, but will certainly answer the question whether there is something wrong with your hardware or not.
well.. i have changed the rom to karmba version, and it works fine for the last 6 hours..
gps functioning well.
may be the fault was in my previous rom (SwiftBL-WWE-Diamond-ROM-v5-5-Lite)
thank you very much for your help
Hi to all
I've the same problem that many people have, as I've seen here in the forum.
Quick gps doesn't update anymore. I've tried all the registry tweaks that I've found but nothing. I've written to HTC but they don't have answered.
I've tried quickgps from kaiser but without success. So, I should do an Hard reset but I want avoid it. Is there someone that has the cab for the diamond's quickgps ? I've seeked here and in other forums but I don't have have found anything. Perhaps reinstalling the original cab should resolve the problem.
My quickgps version is 1.0 build 1815.2630. Rom is 1.37 official from HTC, italian.
Thank you very much to all
here you , QuickGPS 1.04
indie said:
here you , QuickGPS 1.04
Click to expand...
Click to collapse
Thanks a lot
Now I go to test it !
indie said:
here you , QuickGPS 1.04
Click to expand...
Click to collapse
Sorry, but perhaps I don't have explained myself well.
The file you've attached is GPStest to test gps connection. I am seeking quickgps, the cab that allows internal gps to fix faster.
Sorry for misunderstanding
you can get it from here i think
http://forum.xda-developers.com/showthread.php?t=355277
indie said:
you can get it from here i think
http://forum.xda-developers.com/showthread.php?t=355277
Click to expand...
Click to collapse
Thanks a lot, but I have tried it yet. I think that only the specific version for diamond go. When i try to install another version it says me "digital signature with certified reliable not available" etc.
Perhaps because another version is yet installed, but, being in rom, it's impossible to uninstall it. So I wanted the same version installed to overwrite it hoping it will function well.
QuickGPS connection failed
hi all.
i am also having some trouble with my touch diamond (p3700) & quickGPS.
i've had the p3700 for 2 months, and so far so good. i used quickGPS when i first got the p3700 and all worked well. i have loads of apps installed, and around 5 GPS included ie. GarminXT, Route66, iGO8, MapKing2007 etc. all have been working well.
yesterday i decided to update the packedEphemeris data via quickGPS, and after multiple attempts, each attempt would advise "Connection failed try again later"
the next thing i have noticed is that all my GPS apps cannot connect to satellites any more. i tried by leaving my p3700 connected in my car with a clear view of the sky, and even after an hour or more, none of the GPS apps successfully ocked onto any satellites.
in comparison, my other HTC (artemis) p3300 was able to lock onto satellites within a few minutes or less with any of the same GPS apps, also i downloaded the latest packedEphemeris data via quickGPS successfully while i attempted to do so with p3700 yesterday and today. so i know its not anything to do with wifi et al. connections etc.
nothing new has been installed, nor uninstalled on the touch diamond...
so whats up with that???
i have sent an email to HTC support and am awaiting their advice.
i really don't want to have to resort to a hard reset, as installing all those apps will take me a day.
anyone can post their quickGPS reg folder please... from their TOUCH DIAMOND
thanX
I have had this problem where Quick GPS will not update, either from ActiveSync (as it did automatically before), via WIFI or 3G/HSPDA. Whilst at the same I found that You Tube will no longer work so there is definitely some issue with it. By doing a hard reset got it to work again but I think at some point it will stop, so any answers will be most useful (for us all!).
GPS and Internet calling
Everything was working fine unless I installed WM6 Voip application to use my Diamond to make internet calling, thereafter no GPS recognition by tom tom and no luck with Quick GPS as well. Hard resetting the device solved the problem and again I installed the WM 6 Voip application and again no luck with GPS. I did that three times and concluded that unlocking WM 6 Voip feature blocks GPS ports. If you are using WM 6 Voip then you might not be able to use GPS as I experienced.
I have the same problem:the quick gps won't update.If you find anything as a solution please inform!
Solution with Quick GPS update.WORKS!
This solution works and has nothing to do with registry hacks,installing cabs etc..Well lets start:
1)Open Internet Explorer from your Diamond(Start-->Internet Explorer)
2)From the Favourites menu go to the HTC web page(should load,normaly)
You are done!Go to the quick gps and now you can update as before!(It seems that the Diamond losts his way to the internet but as soon as you go to the HTC page,the way described here,the problem is solved!)
thanks for that, just tried it and it worked perfectly!!
Very weird, I had the same problem and the IE trick worked.
Thank you, elflost
I'm having the same issue with quickgps not updating and getting a a connection error. I tried the IE trick but it still didn't work. Any other ideas?
OMG that's crazy!
I was trying all sorts of things and I just opened IE (first time I ever have as I've been using Opera instead) and now both QuickGPS and the YouTube are working again.
Thanks very much for posting, now I don't have to waste anymore of my evening looking for solutions.
Cheers.
The trick with IE solved the issue with me too. That's a bit weird, every other programs are able to find the internet connection through wifi..
lazerin said:
I'm having the same issue with quickgps not updating and getting a a connection error. I tried the IE trick but it still didn't work. Any other ideas?
Click to expand...
Click to collapse
Same for me... However I didn't have HTC in my favs... But I tried entering manually and still no luck
it works!!!!!!!!!!!!!
thank u!!!!!!!!!!!!!!!!
Quick GPS (and you tube) not working
Excellent ! excellent congratulations ! It worked for me too !! I wish HTC support were a bit more awake and gave some basic but good afvises ! THANK YOU !
Fantastic post - worked perfectly on my Diamond running Google Maps. Thank you!
Hi all!
I have a Diamond from Vodafone. But ROM is changed to the latest HTC original. Everything seems to work exept that the software using the GPS cant find it. Seems to be shut off. How can I solve a problem like this??
Thanks in advance
Anders, Frankfurt
Vegaanders said:
Hi all!
I have a Diamond from Vodafone. But ROM is changed to the latest HTC original. Everything seems to work exept that the software using the GPS cant find it. Seems to be shut off. How can I solve a problem like this??
Thanks in advance
Anders, Frankfurt
Click to expand...
Click to collapse
settings/system/External GPS
defaults (on my Diamon) to COM4 and baud rate 4800
Any apps should use same settings eg COM4/4800 baud
GPS
This settings I already have but It does not work anyway. Even Google maps report that no GPS is found. And I have a software for tracking that scan for a gps but it say no gps found.
Anders
Vegaanders said:
This settings I already have but It does not work anyway. Even Google maps report that no GPS is found. And I have a software for tracking that scan for a gps but it say no gps found.
Anders
Click to expand...
Click to collapse
Try to hard reset your phone.
hello all!
i really hate to post a thread on something thats probably already been solved with an easy answer but after 2 hours searching/head scratching and various tools/program downloads i cannot for the life of me get my kaiser's built in gps to work.
on the phone:
T-mobile (uk) MDA Vario 3
R: 1.27.12.32
(edit: i now know this to be an older german/russian version, any advice on a newer version appreciated)
G: 22.45.88.07
D: 1.56.00.00
ive tried setting to com4 with various baud rates (weirdly it hung when i tried it with 4800 and had to soft-reset so didnt work!) ive installed vaious programs (GPStest/GPS info/ GPS Gate etc etc) with all programs including tom tom 7 saying that theres no GPS device!
im pulling my hair out!
im guessing i'll need to update the firmware but hopefully not!
im on my knees for help!
(btw, thanks for reading this!)
quasi_mojo said:
hello all!
i really hate to post a thread on something thats probably already been solved with an easy answer but after 2 hours searching/head scratching and various tools/program downloads i cannot for the life of me get my kaiser's built in gps to work.
on the phone:
T-mobile (uk) MDA Vario 3
R: 1.27.12.32
G: 22.45.88.07
D: 1.56.00.00
ive tried setting to com4 with various baud rates (weirdly it hung when i tried it with 4800 and had to soft-reset so didnt work!) ive installed vaious programs (GPStest/GPS info/ GPS Gate etc etc) with all programs including tom tom 7 saying that theres no GPS device!
im pulling my hair out!
im guessing i'll need to update the firmware but hopefully not!
im on my knees for help!
(btw, thanks for reading this!)
Click to expand...
Click to collapse
The best way how to start gps is:
start quickgps and download the data, then if u have installed gps test, start it and wait for it to find the satelites. Dont change the options. Try to be outside and not in house or building.
no
the GPS is not being found, it is either disabled by the rom/radio or is Fubar!
simply downloading location data isnt going to get it to work!
unplug your computer, walk off into the distance, put it on the floor and tell it where it is.
does it turn on and boot to windows?
me thinks not.
quasi_mojo said:
no
the GPS is not being found, it is either disabled by the rom/radio or is Fubar!
simply downloading location data isnt going to get it to work!
unplug your computer, walk off into the distance, put it on the floor and tell it where it is.
does it turn on and boot to windows?
me thinks not.
Click to expand...
Click to collapse
I dont understand what do u mean. I think the mda cant have the gps disabled, I have htc kaiser and the steps that I wrote always works for me.
perhaps you are running different firmware/roms ???
having fiddled with gps gate some more, an amberish/red led on the right side has started to flash, but still no programs can find the gps! i thought tomtom7 had it when it paused on com4 but then it stayed like that for 15 minites!
Grrrrr
and sorry mikulec for the harsh response, this is really getting on my nipples now!
quasi_mojo said:
perhaps you are running different firmware/roms ???
having fiddled with gps gate some more, an amberish/red led on the right side has started to flash, but still no programs can find the gps! i thought tomtom7 had it when it paused on com4 but then it stayed like that for 15 minites!
Grrrrr
and sorry mikulec for the harsh response, this is really getting on my nipples now!
Click to expand...
Click to collapse
yes I have a different rom.
Another option - try to disable the assisted gps, for that u need to install schaps advanced config - that is a very helpful application.
There can be also one possibility that your gps is faulty.
i will try that and post back
cheers for your help so far!
quasi_mojo said:
i will try that and post back
cheers for your help so far!
Click to expand...
Click to collapse
U are welcome and I wish u luck.
ok, i disabled assisted gps
now all my gps programs are reporting
'could not open com7 it may be in use'
but nothing else happens!
quasi_mojo said:
ok, i disabled assisted gps
now all my gps programs are reporting
'could not open com7 it may be in use'
but nothing else happens!
Click to expand...
Click to collapse
Go to settings/system/external gps and tell me what settings(in the 3tabs-programs,hardware,access) u have set there.
Have you seen this Configuring Tomtom 6 thread linked to from the Wiki yet? If you've tried all of that and still it doesn't work, if it was me I'd hard reset and make Tomtom Navigator the only program I next installed then I'd test it again without making any configuration changes to it (at least the version I use, I don't know if other versions require any fiddling about to get them to work but TTN 6.032, Google Maps and Microsoft Live Search have all been just a case of once it's installed do a soft reset (not even sure this essential but I do it anyway) and then when I start them up, they work fine). Be very patient and give it ages out in the open to find satellites the first time after a fresh install/hard reset.
No GPS after official update
Hi,
I've got very similar problem : i've upgraded my Kaiser with a official rom/radio from Orange FR (wm 6.1, rom 3.31.73.0 FRE, radio 1.65.16.25).
Since this upgrade, my Kaiser cannot find the inboard GPS. I tried using Google maps, ViaMichelin, OrangeNavigation, and many GPS tools... none of them was able to find the GPS !
That sucks.
I called Orange 2 days ago, and i'm waiting for a response. I'll post there if any news.
Mathieu
yes please mathieu, would be good to hear what they suggest!