Disable All data besides MMS? - Tilt, TyTN II, MDA Vario III General

I turned off my data plan since I dont really use it. I was wondering how I could turn off all data and only allow my MMS. My data is always connected for whatever reason I see it connected for hours at a time. I have them all disabled in Kaiser Tweak ATM but I am sure I wont get MMS since it always connects to receive the messages.
Thank you,

"Bandswitch" - I had some success with that.

Jonathan1683 said:
I turned off my data plan since I dont really use it. I was wondering how I could turn off all data and only allow my MMS. My data is always connected for whatever reason I see it connected for hours at a time. I have them all disabled in Kaiser Tweak ATM but I am sure I wont get MMS since it always connects to receive the messages.
Thank you,
Click to expand...
Click to collapse
Use NoData from MoDaCo.
You select to toggle on/off GPRS connections and/or mms connections
http://www.modaco.com/content/pocket-pc-software/246171/new-free-utility/

great program... thx for the link.

Thanks for the tip, gona check it out tonight

Related

Why does GPRS want to connect?

Hello,
on my Diamond, I have e-mail receiving set to "manually" and both weather downloading options unchecked. However, very often, the phone tries to connect to GPRS without asking me for permission. Few days ago, I was playing with my phone, what caused turning off NoData (I dunno why - I have neither turned the Internet profile to "enable" in its settings nor uninstalled NoData). A few moments later, I was VERY suprised to see that.. phone was connected to the GPRS for over 40 minutes! I thought that it'd make my bill like $50 higher. However, it raised my bill for only ~$0,5. I have no idea neither why did it connect nor what did it wanted to do with GPRS connection. Do you have such problems either? What's the matter? How can I fix this so my phone won't want to connect without my demand? Thanks in advance.
NoData should be enough, but I don't know why it reset to enabled if you didn't do this yourself? That said, all it does is toggle some registry settings so perhaps one of the other 'tweak' apps (have you got any installed?) reset the settings...?
Mathew
Yeah, I think that other tweaking apps could make it - that was my first thought. I have Diamond Tweak and Advanced Config installed and I was playing with them, so they could change the settings. My problem though is not to make Diamond unable to connect GPRS - because NoData does everything I want in that matter. I want to know why Diamond wants to connect, while forecast and e-mails checking are off. It'd be great to know that, because maybe then it'd be possible to be sure that (even without NoData) Diamond wouldn't connect to the Internet when we don't want it to do it.
With gprs it's all about the traffic.. the more you download, the more you pay.. I deleted the settings, so it can't connect, even when it wants to.. Only use wifi anyway..
U can enable NoData, but I think it's still possible to manually turn on the connection. NoData won't work then, unless you re-enable and softreset..
djind - oh man, I know how does GPRS work and what do I pay for..
I'll repeat once again, cause I think not everyone got this right. I want to know, WHY does Diamond want to connect to GPRS if it DOESN'T want to download forecast or e-mails. I'd love to have no situations with Diamond trying to connect - without NoData, without deleting settings. Just NO CONNECTING without my CLEAR DEMAND.
Then, please tell me what can make my Diamond want to connect.
You said u were playing around, so opening a page or checking and immediately unchecking weather download or any program using gprs would trigger the connection.. or mayme by accident pressed something..
It's done like that to increase your phone company's income
How about disabling the gprs auto-attachment option found in diamindtweak (or was it advanced config)
Just delete the setting if nothing work, and use wifi...
I actually have unlimited 3G service, so i don't really care if it stayed connected or not (and battery is not really a issue for me..)
djind said:
How about disabling the gprs auto-attachment option found in diamindtweak (or was it advanced config)
Click to expand...
Click to collapse
That's not going to help in this instance. Disabling auto-attachment merely stops the phone resgistering itself as a GPRS-enabled device with the network until it actually requires a data connection to be established. Hence, as soon as the OP's 'rogue app' requests a connection it will get one.
Tigrowski, sorry for the confusion - I was specifically answering your question of how to stop the phone connecting without your demand. I am not aware of an app that could identify this rogue app, but perhaps if you find a packet sniffer that'd give you some clues (i.e. from where the traffic is going, ports etc and, if using cleartext ASCII the actual data being sent).
All said and done though, I think you'd be better of just relying on NoData to put the barrier up as even when you've identified the rogue app you might not be able to make it behave. Besides which there'll likely be another one round the corner wanting to connect when it feels like it! (that was one of the reasons behind why NoData was developed, particularly for roaming users given the significant financial impact of out-of-control network-enabled apps)
Mathew
P.S. It's not QuickGPS periodically downloading almanac data is it? (check the setting as this can be controlled, although it should only be doing so weekly anyway)

detecting programs initiating data connection

Hi,
I'm looking for a soft that would detect and identify which programs (softwares or other) initiate data connections on my kaiser.
I disabled all data-retrieving options on the different softs I have (weather,time,...), but it still connects without my wanting !
Anyone knows something that would do that ?
Thanks.
Good question and I too would be interested in the answer. Mine started doing this a few days ago and has since stopped again!
Activesync and MMS messaging
Both of these programs will switch on your data connection. I changed my mms settings to reject and changed my data connection to my work network to keep it from using data. That worked for me until I added unlimited data to my plan.
Spb Wireless Monitor does a great job at this. It isn't free, but I like it. I have it set as a Today Screen plugin to only show my MediaNet connection, but it can also show USB and wifi data usage. It will give you reports on what's using data, how much it's used, and when it was used. You can also set it to alert you before you go over your limit. It's at http://www.spbsoftwarehouse.com/products/wirelessmonitor/?en
Indeed, SPB wireless monitor is great.
I was looking exactly for the same sort of solution, since after reinstalling some apps I was having too large GPRS data loads.

MMS Question!!!

Hey i was wondering if someone can help me out! i just recently started getting a lot of MMS messages and sending MMS messages. Now i was wondering if there was a way to send and receive MMS messages with out using the data plan. I dont pay for the data plan so each time i send/receive MMS i have to pay. Is there a way to use WiFi connection so i dont have to pay and i can send/receive for free? Is there some settings i need to change? or some programs i can dl? or there is nothing i can do!
Thanks!
lern2lvewithit said:
Hey i was wondering if someone can help me out! i just recently started getting a lot of MMS messages and sending MMS messages. Now i was wondering if there was a way to send and receive MMS messages with out using the data plan. I dont pay for the data plan so each time i send/receive MMS i have to pay. Is there a way to use WiFi connection so i dont have to pay and i can send/receive for free? Is there some settings i need to change? or some programs i can dl? or there is nothing i can do!
Thanks!
Click to expand...
Click to collapse
You could always attach media in an email. That uses WiFi.
Hope that helps.
that wont work cause i would like to recieve and send to people cell phones not to email!
In Settings -> Connections -> Connections you could set you settings to "My Work Network" which it usually assigned to WiFi (you can check in WiFi settings)
MIGHT work but I'm not 100% positive. And even if it did, you'd have to stay connected to WiFi all day or for an access point to just Send/Recieve to see if you got an MMS message.
OR I do believe theres an option through activesync that you can use your computer's internet through your phone. So that would probably be your best bet.
Hope that helps.
Does AT&T still charge data for MMS messages? I read somewhere they don't anymore even though MMS still uses data.
http://howardforums.com/showthread.php?t=1484340
MMS is under your messanging package.
I have a family plan and in that plan it is unlimited messaging (SMS and MMS)
I also have unlimited data so I need not worry.
On the other hand, when another member of the family plan gets a MMS message, it will cost them the $0.25 per KB or whatever the rate is now to download the MMS.
MMS uses the data connection to get the message.
Got in deep charges once with that on an older phone.
MMS will ALWAYS use Data. Such Is Life.
That is true but i spoke to someone at ATT since i have unlimited text messaging...mms is free....yes the data starts up when you send/receive mms messages/downloads and will stop right after its done....and with unlimited text its free...theres a reason it is but i dont remember why!

[Internet]- Block net but still send/receive mms?

I’m very sorry if this is in the wrong section.
I just got the Att Fuze 2days ago and my phone randomly connects to the internet and stays connected. I don’t pay the extra 30$ for internet, I have unlimited text and mms. The only reason I keep it on pay-per-use is because I need it for my MMS. Last night it just kept connecting and when I turned it off it connected back again. So I had to turn my phone off.
Is there a way to block the internet but still be able to send and receive mms? I downloaded Diamond Tweak but not sure if that’s going to help.
Try Diamond Tweaks or Advance Config. 3.3 and report back as this APP's provide easy access and simple tweaks to the Registry.
or install nodata cab
then turn on and off when you want....
i use this when overseas.....saved me £££££££
here you go
http://www.4shared.com/file/66053417/ae669268/MoDaCo_NoData.html
good luck
i have Diamond Tweaks but it completely turns off all data
vodafone Germany got a feature called websession:
you dial in and before you can access any service you wil be redirected to a webside.
Before you bought a packet on this you wont geht any data throug
the clue: nothing goes out but MMS. (which goes out and in(including automaticaly connecting to api))
So if you got a similar feature: you just may deactivate all other APIs and use this.

[Q] How can I remove internet?

Hey guys the G1 data plan is getting too expensive for me and I'm planning to cancel soon. After I call in and cancel, how can I get my G1 to stop trying to access the internet unless its Wifi? Or once I cancel I won't have to worry about this?
I also heard a rumor about changing the APN settings so you can still have and use the internet? Is this true?
no real way to stop the phone from accessing the web since even in the background it sends packets of information. that's just how the phone works that's why you need the data plan for this phone.
i want to cancel the plan cause my sis is paying for mine and i dont want her paying 300$+ a year on me. but i dont want to be charged after i cancel the plan cause my g1 is still accessing the internet. Anyways to prevent it from accessing the internet?
tinyaznboi said:
i want to cancel the plan cause my sis is paying for mine and i dont want her paying 300$+ a year on me. but i dont want to be charged after i cancel the plan cause my g1 is still accessing the internet. Anyways to prevent it from accessing the internet?
Click to expand...
Click to collapse
i just said no there is no way to to shut off the internet due to the fact that the phone requires you to have a google account to run it even if you flash a adp build and skip the logon proceedure the phone still access the web in the background without you knowledge you will still get billed for data charges at t mobs data rate which i think is 25 to 50 cents per meg used.
disable auto sync
if you disable auto sync you wont be accessing the internet much (assuming you don't have a ton of news widgets or something) then sync when you're connected to wifi (toggle settings works well for this)
bittermormon said:
if you disable auto sync you wont be accessing the internet much (assuming you don't have a ton of news widgets or something) then sync when you're connected to wifi (toggle settings works well for this)
Click to expand...
Click to collapse
the problem is even with auto sync off the phone still polls the internet in the background for updates and other things you could remove every internet reliant app off your phone and it still polls the internet it just the way android is designed he want to stop all internet traffic which is impossible without hacking the rom beyond what we do or pulling out the sim. even google maps requires to poll the internet in the background without him even turning it on. it's just impossible to stop it completely.
Install APNdroid.
Easiest, simplest, most reliable way: Go into settings>wireless controls>Mobile Networks>Access Point names, then click on each one and hit menu then delete. You will also need to finangle with tmobile through their customer service number in order to get them to cancel 3g for your G1 (they have some kind of a policy that's supposed to mean that you have to have an unlimited data plan with the G1, but if you're patient with them they'll let you cancel and just have voice.)
Even easier way. Download Toggle Data from market. That's what I've been using since I cancelled my plan. No more data in the background, so my battery life is longer. Sometimes my phone goes like 2-3 days without charge. (Of course without using wifi)
apns not only control how the phone connects to the internet it also handles how it connects to make calls which is also how it connect to edge/3g. so see the conundrum we have here removing all apns also kills making calls.
Before I bricked my G1, (I don't have a data plan) I just went to the T-Mobile store and told the guy what I could do to stop the internet. He just changed some kind of port number and stopped the internet so I don't get charged.
rigamrts said:
apns not only control how the phone connects to the internet it also handles how it connects to make calls which is also how it connect to edge/3g. so see the conundrum we have here removing all apns also kills making calls.
Click to expand...
Click to collapse
I use apndroid all the time(to save battery) and I can still send/receive calls with it.
ultra spikey said:
I use apndroid all the time(to save battery) and I can still send/receive calls with it.
Click to expand...
Click to collapse
i wasn't talking about apndroid
i was talking about the guy who told him to delete all his apns
if i use apndroid will i still be able to use wifi? also im using a JACHero's rom and i noticed this in the settings...
Data Sync > Google > Background Date Usage [X]
APN Droid only kills the data.
rigamrts said:
apns not only control how the phone connects to the internet it also handles how it connects to make calls which is also how it connect to edge/3g. so see the conundrum we have here removing all apns also kills making calls.
Click to expand...
Click to collapse
No, the APN controls cellular data (internet and MMS) only. Voice and SMS are "built in" so to speak - as long as the SIM matches yoru carrier's records, they will work.
Deleting the APNs (or using APNdroid) will block cellular data, leaving voice, SMS and WiFi internet unaffected.

Categories

Resources