Hi all,
I am on Dutty's apr-29 rom and here is my issue..
My kaiser is connected to my work pc with activesync installed and i am unable to use internet on my device... I can update htc weather with no worries but the pie and skyfire doesn't work... the strange thing is that netfront browser works just fine so iam not sure if its a proxy issue or not???
I would like to use skyfire if possible so pls let me know what can i do to make it work.
Thanks alot
First thing I'd try is to reboot the computer AND soft reset the phone. If that doesnt work, try disabling advanced network... under connections usb to pc.
ps- in the future, its recommended NOT to start a new thread for something like this, but post it in the rom's thread (duttys in your case)
hi, i have the same problem...but I still using the standard ATT rom...
ajmoncrief said:
First thing I'd try is to reboot the computer AND soft reset the phone. If that doesnt work, try disabling advanced network... under connections usb to pc.
ps- in the future, its recommended NOT to start a new thread for something like this, but post it in the rom's thread (duttys in your case)
Click to expand...
Click to collapse
Hi,
Thanks for the quick reply, I tried what you suggested but still no luck..
I honestly don't know...the fact that you are able to update the weather but not others has me stumped. Has it always behaved this way? Can you do a complete system backup using sprite and hard resest, before you restore, connect it to activesync (you do not need to configure it to sync with your device, iow just cancel the first screen) and see if you can use pie or check your email. If you can then there must be a problem with your settings somewhere, but if you cant then just use sprite for a full system restore and you should be back to where you were and maybe someone else can help.
For what its worth when I first got my tilt it would not use the internet no matter which way I tried (ota or activesync). Then it magically just started working.
hello once again,
Ok so here is the thing... i played around with it a bit more and was able to get pie to work.. but everything else still doesn't work (windows live, skyfire, etc..)
I went to connections>>advanced>>select network>> on this screen i selected "My ISP" for the top menu and "My Work Network" for the bottom menu... By making this change pie is now working but still no luck with skyfire..
Note: i do not have a data plan so MY ISP menu is empty, i usually use skyfire with wifi or when connected to my laptop at home
PS: I didn't do a hard reset because i dont think it has anything to do with rom upgrade...i have flashed my device like 47 times in last 2 months and have had the same issue with every rom i've tried including the original htc rom. Everything works jsut fine when when my device is connected to my laptop at home using activesync.
I think you would still have the problem after a hard reset. Mine has the problem now on the standard Tilt ROM. The wierd part is it didnt when I first set it up and was running the internet through cerdisp. I guess I need to look into it too, but I havent been going crazy trying to find it.
What version of activesync are you using?
Iam using Activesync 4.5..
Have you tried disabling your windows firewall?
Dumb Question
If the phone is connected to your work PC, why would you use the browser on the phone and not the work computer?
If you are worried about what the boss might see - here's the problem with that - can't they just monitor the server traffic anyway, whether you use the phone or the computer, since you would be using the work's server?
What i do at work - first make sure there are no keyboard loggers - second use the internet on the phone and disable the ethernet on the computer.
I remember an option somewhere in the syncing process about allowing income data connections - I dont know exactly what it does, but i will try to find it and post something
EDIT - it was an option to allow wireless incoming data to phone while connected to activesync.
If your talking about tethering, then you're doing it wrong.
Make sure your Activesync isn't connecting to your phone in the first place. Turn off the "USB" connect in the settings for Activesync.
THen go on your phone and open up the "windows" and look for a file called "intshr" or something like that. Open it up and then hit connect.
You don't need to change any settings for the Media Net if you're using the AT&T rom.
larcen007 said:
If the phone is connected to your work PC, why would you use the browser on the phone and not the work computer?
If you are worried about what the boss might see - here's the problem with that - can't they just monitor the server traffic anyway, whether you use the phone or the computer, since you would be using the work's server?
What i do at work - first make sure there are no keyboard loggers - second use the internet on the phone and disable the ethernet on the computer.
I remember an option somewhere in the syncing process about allowing income data connections - I dont know exactly what it does, but i will try to find it and post something
EDIT - it was an option to allow wireless incoming data to phone while connected to activesync.
Click to expand...
Click to collapse
Well the only reason i wanna use my device and not the work pc is beacuse all the major sites like hotmail, youtube, facebook are blocked but they all work on my device using "only" netfront browser..
Cheers
Xyberz said:
If your talking about tethering, then you're doing it wrong.
Make sure your Activesync isn't connecting to your phone in the first place. Turn off the "USB" connect in the settings for Activesync.
THen go on your phone and open up the "windows" and look for a file called "intshr" or something like that. Open it up and then hit connect.
You don't need to change any settings for the Media Net if you're using the AT&T rom.
Click to expand...
Click to collapse
Thanks Bud,
will give it a go and report back...
PS: i just noticed that windows firewall is enabled and i dont have access to disable it :-(
you must edit the registry
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services]
"AllowLSP"=dword:00000000
ld-runner said:
you must edit the registry
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services]
"AllowLSP"=dword:00000000
Click to expand...
Click to collapse
I am creating a new key under: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services
Called AllowLSP ??
Cheers
farhanali_ said:
I am creating a new key under: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services
Called AllowLSP ??
Cheers
Click to expand...
Click to collapse
yes, or you could just copy and paste my post into a file with and extension called .reg , save it and double click on it.
Related
Hey everyone I am really curious about how I need to go about accesing the internet throung the usb connection while my tilt is plugged in. I have read that previous versions of active sync had a feature called pass through which could be enabled / disabled at your choice. However in the current version of active sync this does not seem to be an option.
I basically just want to be able to browse the net on my tilt while I am connected to the pc via my usb cable.
Why because the at home internet connect is way better then the 3g network. This way I can download large files directly to my phone.
I have tried the registry edit as well as other methods. Still can't get the damn thing to work..
I am running the stock tilt rom directly from att. No mods no nothing. Also the version of active sync that I have came directly off the att tilt cd.
Please Help I appreciate your efforts in advance!
I have this workaround ( same situation with my X51V ) that you can try.
import the reg file or add the following key:
Code:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services]
"AllowLSP"=dword:00000000
Most works out of the box ( internet while activesync ... not sure why yours don't ... could be something that you did ??
anyway ... try the reg import and report back
I didn't do anything on mine and it is able to connect to internet through the USB whenever I connect it. WiFi is disable when the USB is connected.
earthman5678 said:
I didn't do anything on mine and it is able to connect to internet through the USB whenever I connect it. WiFi is disable when the USB is connected.
Click to expand...
Click to collapse
when setting up activesync ... the last window allow you to enable WIFI while connected to USB too ( if prefered )
or go into ( File -->> Connection Settings ) and check "allow wireless connection on device while connected to desktop"
yeah tried the reg hack before. didn't change anything for me.
I also messed with the advanced network functionality box under start settings> connections> USB to PC.
No worky for me.
Is there anything else you guys have done on the phone? Should there be any other entries under network management? RIght now I have listed
Media Net
AT&T ISP
My Work Network
MY ISP
If you haven't MOD anything like you've said ... I would suggest a hard reset ... and don't touch that USB to PC setting !!!
things should allow you to surf while activesync right out of the box !
UnicornKaz said:
If you haven't MOD anything like you've said ... I would suggest a hard reset ... and don't touch that USB to PC setting !!!
things should allow you to surf while activesync right out of the box !
Click to expand...
Click to collapse
for real OH Jebus Hard reset. Just great. Well atleast i don't have too much on my phone.
Any other suggestions?
In your PC ACtiveSYnc' connection settings, you will have a drop-down under name "This computer is connected to". Take out Automatic there and choose Internet.
Sometimes ActiveSync will not recognize that your PC has internet. Tell me if this was it in your case.
Regards,
Carty..
Carty said:
In your PC ACtiveSYnc' connection settings, you will have a drop-down under name "This computer is connected to". Take out Automatic there and choose Internet.
Sometimes ActiveSync will not recognize that your PC has internet. Tell me if this was it in your case.
Regards,
Carty..
Click to expand...
Click to collapse
yeah my man did that as well... maybe I will try the hard reset and see what happens
ive been curious about this also. mine just seems to default to my 3g connection...do i have to disable this for it to use the active sync connection?
Nope. When Synced, ActiveSync' net is on first priority!
Regards,
Carty..
I wonder if you have the networks proxy set in your default internet connection and when you connect via as it cant see the proxy nd thus wont allow connection...
interesting i tried out the newest rom on kaiser upgrade section...the att rom. i was gettin the same behavior. i loved the rom but was only bugged by that. i went to a new rom and fixed that problem. something with how att handles activesync cant do the job.
And ATT use a proxy...
unwired4 said:
And ATT use a proxy...
Click to expand...
Click to collapse
i tried the diasable proxy cab flying around...it was no good. I'm using a different rom right now. It only happened to me on that specific rom.
I would have thought you just need to check the connection settings and make sure no proxy is enabled.
regarding the Tilt and the proxy ... you could try out these 2 cabs at this thread ( 1 for disable ... the other is for enable )
look towards the end of the post ..."Sleuth255" had provided the cabs for you Tilt owners to fix the hidden proxy that is involved with AT&T Tilt
http://forum.xda-developers.com/showpost.php?p=1656670&postcount=1
if it works ... holler so that other Tilt owners can benefit !
UnicornKaz said:
regarding the Tilt and the proxy ... you could try out these 2 cabs at this thread ( 1 for disable ... the other is for enable )
look towards the end of the post ..."Sleuth255" had provided the cabs for you Tilt owners to fix the hidden proxy that is involved with AT&T Tilt
http://forum.xda-developers.com/showpost.php?p=1656670&postcount=1
if it works ... holler so that other Tilt owners can benefit !
Click to expand...
Click to collapse
Nice I downloaded the cabs. But before I launched them I took a look at my tilt for another second.
Keep in mind that I just did a hard reset and this is a stock att ship ROM.
Under start> Programs>Tools> There is a icon called proxy manager.
I clicked on diable proxy and did a soft reset. The problem is now fixed. I can browse the net while connected via usb through pass Thru.
Maybe the cabs do not need to be downloaded afterall as att already has them installed but thank you for the lifesaver!
Thanks people!
Hi,
I also used proxy manager to disable the proxy. Now whenever i connect my phone with activesync, it keeps connecting to the phone's GPRS (mediaNet). i look under the connections icon and it shows medianet connected, but not activesync.
anyone know how i can fix this to return to normal? i tried enabling the proxy again, but no luck.
HI,
I think I need the opposite
At work there is a very restrictive proxy that allows pie connections but, for example, does not allow to update the weather in HTC HOME.
There is a WIFI nearby that allows it...
Now, what I would like is to have my device ActiveSync'ed (so contacts, and so on are OK) while using WIFI for ineternet access...
Anyone knows if it is possible and how?
Thanks
I am using Activesync 4.5.0 (Build 5096) on my WinXP laptop to sync the AT&T Tilt with my laptop and outlook exchange. I have no problem with Activesync over the cellular network or wifi, but when I connect the USB and it automatically launches Activesync on the laptop, I see this error on the PC side. Looks like it is able to sync everything except the Outlook data. I looked for this error code on Microsoft site, but I don't see much details about this error code. I have installed additional SSL certificates to see if that resolves the issue, but it didn't. I have had this issue from Day-1.
It is not an issue as long as I am in USA where I have cellular data service to get the emails/appointments/contacts into my phone over the cellular network. However, when I travel, I don't plan to pay for the exhorbitant roaming charges and so would like to use the USB link to sync the info.
Has anyone else faced this problem? Is there a solution?
I heard they had wifi overseas, too. Supposedly its not that exhorbitant, and possibly more convenient than keeping a laptop with you at all times to sync your PIM stuff.
I do carry a travel router with me everywhere with my laptop while on travel to create an instant wifi access point. However, if I am sitting in one of our offices and have a LAN connection to my laptop, I don't see why I can't get my USB connection to work. I am sure there are others who need to sync up Outlook while the phone is connected to the laptop for charging purpose.
Saw this on a site, might want to check it out:
http://devnote.stokemaster.com/2008/02/activesync-45-supportcode-85020006-and.html
" Support Code:80072f7d
Fixes:
Note that this involves registry changes so be careful with it.
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services]
"AllowLSP"=dword:00000000
This site has the registry file that you can double click and modify.
http://www.pocketpcfaq.com/faqs/activesync/LSPvalue.reg
This disables the Layered Service Provider (LSP) that use the Windows TCP/IP stack. "
Don't know if that will work,but worth a try.
Make sure to export your original reg key first so if it doesn't help you can always change it back.
Alemaker
I tried the registry addition on the phone just now and then rebooted the phone. But, it didn't help. I have seen this discussion on pdaphone forum, but it is not clear whether it should be done on the phone or the PC side. Chris Herrera's site is also not very clear about it. The file has a .reg extension. Does the extension indicate where it should be run? I manually added the parameter on the phone.
hmm,
good question, and searching both my Vista laptop and my Tilt registry, didn't even come up with that key, but it may be making a new key.
If it didn't work on the phone,try the pc, and if it that doesn't help, was worth a shot.
This is a two part problem.....
The first thing you need to do is add the reg entry to your PC not your Tilt. You can download and run the reg entry from
http://www.pocketpcfaq.com/faqs/activesync/LSPvalue.reg
or you can add the line to your reg using regedit.....
The second part is changing the connection settings within ActiveSync....
- Go to File/Connection Settings within ActiveSync...
- Go to the drop down box that reads "This Computer Connects to:" and change that from "Auto" to "The Internet"
Those two items fixed my errors......
Good luck....
The last suggestion fixed it for me.
The funny part is that this is a problem only on my work laptop. At home I have no issues.
Thanks
worked for me too
...but it didn't work with dutty's...using RynCpprV6 at the moment.
I think it is something to do with my work PC..
Just want to chime in and say this fixed the activesync error 80072f7d for me too!
(added HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services\"AllowLSP"=dword:00000000, didn't reboot, and File/Connection Settings within ActiveSync changed from "Auto" to "The Internet")
Another thumbs up. Works a treat. Didn't even need to reboot.
This is a two part problem.....
The first thing you need to do is add the reg entry to your PC not your Tilt. You can download and run the reg entry from
http://www.pocketpcfaq.com/faqs/activesync/LSPvalue.reg
or you can add the line to your reg using regedit.....
The second part is changing the connection settings within ActiveSync....
- Go to File/Connection Settings within ActiveSync...
- Go to the drop down box that reads "This Computer Connects to:" and change that from "Auto" to "The Internet"
Those two items fixed my errors......
Good luck....
Click to expand...
Click to collapse
Worked like a charm - thank you, kind sir!
Thank You!
Another fine service provided by the xda-developers forum! Problem solved!
Ditto!
Another fine service provided by the xda-developers forum! Problem solved!
Just wanted to chime in and say that this worked on my Rhodium too! Thanks Kaiser users!
Activesync error 80072F7D on Toshiba TG01 comes up when try to sync Toshiba TG01 with company's Exchange server
Solution;
Start>>Settings>>Connections>>USB to PC>>Uncheck box: "Enable advanced network functionality".
Sync'd up fine right after.
I have my PDA plugged into my PC at work and I have to use a proxy to get out to the internet. I am trying to figure out how to make this work.
I have added the registry entry on my PC.
I have set the connection settings in activesync including "This computer is connected to:" to all 3 options
I have tried to set up the proxy on my PDA
I have tried both WM6.0 and 6.1 ROMs
I have tried different radios
I have searched the Forums but if I missed something let me know
Any help would be great
dagentooboy said:
I have my PDA plugged into my PC at work and I have to use a proxy to get out to the internet. I am trying to figure out how to make this work.
I have added the registry entry on my PC.
I have set the connection settings in activesync including "This computer is connected to:" to all 3 options
I have tried to set up the proxy on my PDA
I have tried both WM6.0 and 6.1 ROMs
I have tried different radios
I have searched the Forums but if I missed something let me know
Any help would be great
Click to expand...
Click to collapse
Here is the solution:
Open Registry Editor on your desktop (Start/Run and type "regedit") and locate the key
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows CE Services. Right-click on the value list
and choose New/DWORD value. Type the name "AllowLSP" and leave the value zero.
Disconnect and connect your device and Pocket Internet Explorer (and all other
applications) will start working.
Could be
I'm not 100 % positive that this is the same issue you're having but I have a weird issue where my proxy from my work PC gets put on my phone regardless of what settings i tweak. My work blocks things like gmail and hotmail so whenever i try to access those on my phone it tries to put use my PC's internet and blocks it. If this is the issue you're having read my post#7 on this link.
http://forum.xda-developers.com/showthread.php?t=360268
This isn't obviously the easiest way to fix this but i tried EVERYTHING and finally find out how to fix it so i do it this way.
Hope this helps. Is this what is happening for you?
alaiwy said:
I'm not 100 % positive that this is the same issue you're having but I have a weird issue where my proxy from my work PC gets put on my phone regardless of what settings i tweak. My work blocks things like gmail and hotmail so whenever i try to access those on my phone it tries to put use my PC's internet and blocks it. If this is the issue you're having read my post#7 on this link.
http://forum.xda-developers.com/showthread.php?t=360268
This isn't obviously the easiest way to fix this but i tried EVERYTHING and finally find out how to fix it so i do it this way.
Hope this helps. Is this what is happening for you?
Click to expand...
Click to collapse
I already disabled the network functionality for activesync. I also did the registry update mentioned above. If I go to pocketIE it will act like it is trying to load then it will say "The page cannot be displayed or downloaded because the connection was lost. Check the connection and try again later"
It seems like it goes to the DNS and gets the IP but from there it stops working.
Intranet sites work but not Internet sites. Any idea on the proxy settings?
So, are you trying to get your phone's internet source to work on your phone while connected to your PC? Or are you trying to get the internet FROM your PC to work ON your PPC?
I am trying to get the internet working from the pc to the pda.
I tried this ROM and it seems to be working now.
You still have to go into connections and set it to "my work network" and then edit it and add the proxy settings.
Thanks for the help.
Hi all,
I've searched the entire forum several times, but i cant find any solution for this so i would like some tips on how to fix this problem
First off, Activesync is working just fine, thats not the problem. But i would like to be able to update weather info and quickgps for instance by simply using activesync with the USB cable. All i get is a simple error "Can't connect".
my PC is a Xp x64 system, HTC has the original dutch rom installed.
please gimme some tips
You have to have Advanced Connectivity (or something like that) enabled in the USB to PC connection settings...
I have the same problem. When you don't have 3G connexion create internet work fine on USB.
But when you specify the network 3G for application which access to internet this does not work.
I need help to ! how to specify when 3G is not avaible (ActiveSync USB) use the work network for internet ?
You have to have Advanced Connectivity (or something like that) enabled in the USB to PC connection settings...
Click to expand...
Click to collapse
It's enable and doesn't work better
Any news ? someone find a solution. Many people reporting this problem on custom ROM.
Are you with T-Mobile by any chance?
No on vodafone.
krakout said:
You have to have Advanced Connectivity (or something like that) enabled in the USB to PC connection settings...
Click to expand...
Click to collapse
No it should be DISABLED to make it work, when enabled you will not be able to activesync when connected via usb. That was the problem here for me.
beserker said:
Hi all,
I've searched the entire forum several times, but i cant find any solution for this so i would like some tips on how to fix this problem
First off, Activesync is working just fine, thats not the problem. But i would like to be able to update weather info and quickgps for instance by simply using activesync with the USB cable. All i get is a simple error "Can't connect".
my PC is a Xp x64 system, HTC has the original dutch rom installed.
please gimme some tips
Click to expand...
Click to collapse
Check this.
http://forum.soft32.com/pda/Desktop-Pass-internet-connection-ActiveSync-WM6-ftopict65416.html
Open Registry Editor on your desktop (Start/Run and type "regedit") and locate the key HKEY_LOCAL_MACHINE\Software\Microsoft\Windows CE Services. Right-click on the value list and choose New/DWORD value. Type the name "AllowLSP" and leave the value zero. Disconnect and connect your device and Pocket Internet Explorer (and all other applications) will start working.
Click to expand...
Click to collapse
It simply fixes my problem with ActiveSync 4.5.
That registry thing works great, thanks a lot!
I also had this problem, and following this it was solved:
Open Registry Editor on your desktop (Start/Run and type "regedit") and
locate the key HKEY_LOCAL_MACHINE\Software\Microsoft\Windows CE Services.
Right-click on the value list and choose New/DWORD value. Type the name
"AllowLSP" and leave the value zero.
Disconnect and connect your device and Pocket Internet Explorer (and all
other applications) will start working.
Click to expand...
Click to collapse
http://forum.soft32.com/pda/Desktop-Pass-internet-connection-ActiveSync-WM6-ftopict65416.html
Hi all,
I am looking for a a way to browse the contents of my Kaiser (file explorer) through a USB connection to my PC WITHOUT having to install ActiveSync. Is it even possible?
I've searched the forum, browsed the stickies but I can't seem to find an answer.
LarrxX said:
Hi all,
I am looking for a a way to browse the contents of my Kaiser (file explorer) through a USB connection to my PC WITHOUT having to install ActiveSync. Is it even possible?
I've searched the forum, browsed the stickies but I can't seem to find an answer.
Click to expand...
Click to collapse
Nope, as far as I am aware, activesync is needed.
If you do not have the disk, you can download the software here:
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/activesync45.mspx
There are a couple of apps that can do this. I think one of them might be called "card export", but don't hold me to it...
yes, there is.
you can use wm5torage v1.8, but you need to make some trials with Menu--> troubleshooting options before activiate wm5storage.
On success you will browse your SD card on your PC.
see attachments
@chrisrc1985: I'm not that hopeless of a n00b Thanks for the activesync download link, but I definitely do not want to install it on my very public PC at work!
@dancj: Card Export is what I'm looking for, only problem is, it's not freeware
@dool2002: Cool, I'll give wm5torage a try but it looks like it's very iffy and not very stable.
Anyway, thanks for your replies guys; appreciate it!
WM5torage usually doesn't work on the Kaiser. CardExport does. But remember this only lets you browse the storage card and not the internal phone memory.
Another option is to use Mocha FTP server, and to browse your phone through the network with an FTP client. This allows to view the phone memory as well. However it would only be over wifi/bluetooth for you, as USB still requires ActiveSync to be installed to add the USB network drivers.
Thanks for the heads up about WM5torage, guess I won't bother trying to fiddle with it...
As for CardExport, I tried the evaluation version and it is exactly what I need! Now the only thing left to do is find a freeware that does the same...
WM5torage works with me
I used wm5torage few times with Kaiser, it works fine with me when I select both disables from troubleshooting menu. I copy around 300 meg with it without any mentioned problems.
If you guys know a bug in it, please let me know.
Well I installed WM5torage to try it out (and did a soft reset after the install). When I clic on the disables in the troubleshoot menu, nothing happens, I mean how do I know that the actual options have been disabled? And how do I re-enable them?!
Anyways, when I activate it and plug my phone in, my PC detects a new storage device called WM5torag (without the 'e'), installs drivers for it, then... nothing! It doesn't appear in my windows explorer.
If it's of any relevance, I am running my Kaiser under the HTC WM6.1 official ROM.
dool2002 said:
If you guys know a bug in it, please let me know.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=349143
Many people are having problems with it, and the only semi-working version actually requires some files ripped from CardExport. It seems it sometimes works on certain ROMs, but like many others (mainly under WM6.1 I think) I have no luck with my configuration. I'm getting the common explorer freeze with subsequent "please insert a disk in drive X:" message when trying to access the drive, and the Kaiser freezes most of the time as well. Sometimes the drive doesn't even appear on the PC.
WM5torage is worth trying once, if it works for you then you're lucky, if not then don't bother getting mad trying to get it to work as it's very unlikely it will.
LarrxX said:
Hi all,
I am looking for a a way to browse the contents of my Kaiser (file explorer) through a USB connection to my PC WITHOUT having to install ActiveSync. Is it even possible?
I've searched the forum, browsed the stickies but I can't seem to find an answer.
Click to expand...
Click to collapse
http://www.sparus-software.com/Devi...pport,43/THE-ULTIMATE-TOOL-FOR-HOTLINERS.html
This will help you for Browsing u r phone throuh USB
roghank said:
http://www.sparus-software.com/Devi...pport,43/THE-ULTIMATE-TOOL-FOR-HOTLINERS.html
This will help you for Browsing u r phone throuh USB
Click to expand...
Click to collapse
"Personal Edition only works over ActiveSync (tethered or via Bluetooth)."
Try nueMassStorage.... it makes your device USB easy to install apps without active sync... but it also gives you the choice to use Active sync if you want to....
http://www.nuerom.com/BlogEngine/page/nueMassStorage.aspx
And it is free and reliable! Using it on my mogul 6800...
It works the same way as WM5torage, so same has the same problems on the Kaiser, or even worse.
Hi,
I'm trying to solve this problem for a week...
My father is using Elf, another ppc with WM6.1 - there is the funny thing:
in application (settings) USB to PC -
In my Kaiser it is asking for ActiveSync Connection or Internet Sharing.
In father's PDA it is asking for ActiveSync, Inernet Sharing and USB DRIVE.
Does anybody know something about it? I would like to have also three variations of connection i that dialog.
Is it a different version of Usb to PC service?
Thanx a lot!
btw: sorry for my bad english.