Database Develop

[WIP] Omap4 kexec

This thread is mostly just a placeholder right now, however there has been a lot of work put into creating a working kexec for the Bionic; the output below shows it booting an unsigned kernel.
Code:
Uncompressing Linux... done, booting the kernel.
<6>Initializing cgroup subsys cpu
<5>Linux version 2.6.35.7-g9e4d7f7-dirty ([email protected]) (gcc version 4.4.3 (GCC) ) #162 SMP PREEMPT Sat Dec 10 04:11:43 PST 2011
CPU: ARMv7 Processor [411fc092] revision 2 (ARMv7), cr=10c53c7f
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: mapphone_
<6>flat_dev_tree_address=0x88490000, flat_dev_tree_size == 0x00002487
Memory policy: ECC disabled, Data cache writealloc
<7>On node 0 totalpages: 260864
<7>free_area_init_node: node 0, pgdat c0766e40, node_mem_map c099b000
<7> Normal zone: 1024 pages used for memmap
<7> Normal zone: 0 pages reserved
<7> Normal zone: 129024 pages, LIFO batch:31
<7> HighMem zone: 1022 pages used for memmap
<7> HighMem zone: 129794 pages, LIFO batch:31
<3>Failed to reserve SMC memory: -16
<6>***********************<6>OMAP4430 ES2.2 type(HS)
<6>id-code (4b95c02f)
<6>Die-id (4A140024-00000001-0A3BAB75-1300C00F)
<6>Prod-id (0001B95C-000400CC)
<6>The device is trimmed
<6>SLDO: MPU=0x3e0 CORE=0x3e0 IVA=0x3e0
<6>***********************<3>Uninitialized omap_chip, please fix!
<6>SRAM: Mapped pa 0x40300000 to va 0xfe400000 size: 0x100000
<3>FIXME: omap44xx_sram_init not implemented
<6>Reserving 20971520 bytes SDRAM for VRAM
<6>SMC: Allocated workspace of 3M at (0x9c900000)
<6>PERCPU: Embedded 7 pages/cpu @c25ab000 s5952 r8192 d14528 u65536
<6>pcpu-alloc: s5952 r8192 d14528 u65536 alloc=16*4096
<6>pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258818
<5>Kernel command line: nosmp console=ttyO2,115200n8 rw [email protected] [email protected] vram=20M omapgpu.vram=0:4M,1:16M,2:16MT init=/init ip=off mmcparts=mmcblk1:p7(pds),p15(boot),p16(recovery),p17(cdrom),p18(misc),p19(cid),p20(kpanic),p21(system),p22(cache),p23(preinstall),p24(webtop),p25(userdata),p26(emstorage)
<6>PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>Memory: 456MB 52MB 511MB = 1019MB total
<5>Memory: 951248k/951248k available, 92208k reserved, 523264K highmem
<5>Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA : 0xffa00000 - 0xffe00000 ( 4 MB)
vmalloc : 0xe0800000 - 0xf8000000 ( 376 MB)
lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.init : 0xc0008000 - 0xc0049000 ( 260 kB)
.text : 0xc0049000 - 0xc06bb000 (6600 kB)
.data : 0xc06ec000 - 0xc0767920 ( 495 kB)
<6>Hierarchical RCU implementation.
<6> RCU-based detection of stalled CPUs is disabled.
<6> Verbose stalled-CPUs detection is disabled.
<6>NR_IRQS:368
<4>omap_hwmod: sys_32k_ck: missing clockdomain for sys_32k_ck.
<4>omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck.
<4>omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for dpll_mpu_m2_ck.
<4>------------[ cut here ]------------
<4>WARNING: at arch/arm/mach-omap2/clock.c:335 omap2_clk_enable+0xbc/0x14c()
clock: aess_fck: could not enable: -16
<d>Modules linked in:
[<c004f54c>] (unwind_backtrace+0x0/0xf0) from [<c00939e0>] (warn_slowpath_common+0x4c/0x64)
[<c00939e0>] (warn_slowpath_common+0x4c/0x64) from [<c0093a78>] (warn_slowpath_fmt+0x2c/0x3c)
[<c0093a78>] (warn_slowpath_fmt+0x2c/0x3c) from [<c0063334>] (omap2_clk_enable+0xbc/0x14c)
[<c0063334>] (omap2_clk_enable+0xbc/0x14c) from [<c006d1a4>] (clk_enable+0x3c/0x60)
[<c006d1a4>] (clk_enable+0x3c/0x60) from [<c00595b8>] (_enable_clocks+0x4c/0x9c)
[<c00595b8>] (_enable_clocks+0x4c/0x9c) from [<c005a0d0>] (_omap_hwmod_enable+0x90/0x158)
[<c005a0d0>] (_omap_hwmod_enable+0x90/0x158) from [<c005a260>] (_setup+0x90/0x11c)
[<c005a260>] (_setup+0x90/0x11c) from [<c0058ab0>] (omap_hwmod_for_each+0x2c/0x70)
[<c0058ab0>] (omap_hwmod_for_each+0x2c/0x70) from [<c0058db8>] (omap_hwmod_late_init+0x64/0x88)
[<c0058db8>] (omap_hwmod_late_init+0x64/0x88) from [<c000f2e4>] (omap2_init_common_hw+0x70/0x8c)
[<c000f2e4>] (omap2_init_common_hw+0x70/0x8c) from [<c0013cd4>] (mapphone_init_irq+0x10/0x24)
[<c0013cd4>] (mapphone_init_irq+0x10/0x24) from [<c000b4b0>] (init_IRQ+0x30/0x3c)
[<c000b4b0>] (init_IRQ+0x30/0x3c) from [<c0008c08>] (start_kernel+0x1a0/0x37c)
[<c0008c08>] (start_kernel+0x1a0/0x37c) from [<80008080>] (0x80008080)
<4>---[ end trace 1b75b31a2719ed1c ]---
<3>Trying disable clock aess_fck with 0 usecount
<4>------------[ cut here ]------------
<4>WARNING: at arch/arm/plat-omap/clock.c:65 clk_disable+0x48/0x80()
<d>Modules linked in:
[<c004f54c>] (unwind_backtrace+0x0/0xf0) from [<c00939e0>] (warn_slowpath_common+0x4c/0x64)
[<c00939e0>] (warn_slowpath_common+0x4c/0x64) from [<c0093a10>] (warn_slowpath_null+0x18/0x1c)
[<c0093a10>] (warn_slowpath_null+0x18/0x1c) from [<c006d288>] (clk_disable+0x48/0x80)
[<c006d288>] (clk_disable+0x48/0x80) from [<c00598f4>] (_disable_clocks+0x18/0xa4)
[<c00598f4>] (_disable_clocks+0x18/0xa4) from [<c0059c0c>] (_omap_hwmod_idle+0x128/0x150)
[<c0059c0c>] (_omap_hwmod_idle+0x128/0x150) from [<c005a2d8>] (_setup+0x108/0x11c)
[<c005a2d8>] (_setup+0x108/0x11c) from [<c0058ab0>] (omap_hwmod_for_each+0x2c/0x70)
[<c0058ab0>] (omap_hwmod_for_each+0x2c/0x70) from [<c0058db8>] (omap_hwmod_late_init+0x64/0x88)
[<c0058db8>] (omap_hwmod_late_init+0x64/0x88) from [<c000f2e4>] (omap2_init_common_hw+0x70/0x8c)
[<c000f2e4>] (omap2_init_common_hw+0x70/0x8c) from [<c0013cd4>] (mapphone_init_irq+0x10/0x24)
[<c0013cd4>] (mapphone_init_irq+0x10/0x24) from [<c000b4b0>] (init_IRQ+0x30/0x3c)
[<c000b4b0>] (init_IRQ+0x30/0x3c) from [<c0008c08>] (start_kernel+0x1a0/0x37c)
[<c0008c08>] (start_kernel+0x1a0/0x37c) from [<80008080>] (0x80008080)
<4>---[ end trace 1b75b31a2719ed1d ]---
<4>omap_hwmod: dmic: resetting
<4>------------[ cut here ]------------
<4>WARNING: at arch/arm/mach-omap2/clock.c:335 omap2_clk_enable+0xbc/0x14c()
clock: dss_fck: could not enable: -16
<d>Modules linked in:
[<c004f54c>] (unwind_backtrace+0x0/0xf0) from [<c00939e0>] (warn_slowpath_common+0x4c/0x64)
[<c00939e0>] (warn_slowpath_common+0x4c/0x64) from [<c0093a78>] (warn_slowpath_fmt+0x2c/0x3c)
[<c0093a78>] (warn_slowpath_fmt+0x2c/0x3c) from [<c0063334>] (omap2_clk_enable+0xbc/0x14c)
[<c0063334>] (omap2_clk_enable+0xbc/0x14c) from [<c006d1a4>] (clk_enable+0x3c/0x60)
[<c006d1a4>] (clk_enable+0x3c/0x60) from [<c00595b8>] (_enable_clocks+0x4c/0x9c)
[<c00595b8>] (_enable_clocks+0x4c/0x9c) from [<c005a0d0>] (_omap_hwmod_enable+0x90/0x158)
[<c005a0d0>] (_omap_hwmod_enable+0x90/0x158) from [<c005a260>] (_setup+0x90/0x11c)
[<c005a260>] (_setup+0x90/0x11c) from [<c0058ab0>] (omap_hwmod_for_each+0x2c/0x70)
[<c0058ab0>] (omap_hwmod_for_each+0x2c/0x70) from [<c0058db8>] (omap_hwmod_late_init+0x64/0x88)
[<c0058db8>] (omap_hwmod_late_init+0x64/0x88) from [<c000f2e4>] (omap2_init_common_hw+0x70/0x8c)
[<c000f2e4>] (omap2_init_common_hw+0x70/0x8c) from [<c0013cd4>] (mapphone_init_irq+0x10/0x24)
[<c0013cd4>] (mapphone_init_irq+0x10/0x24) from [<c000b4b0>] (init_IRQ+0x30/0x3c)
[<c000b4b0>] (init_IRQ+0x30/0x3c) from [<c0008c08>] (start_kernel+0x1a0/0x37c)
[<c0008c08>] (start_kernel+0x1a0/0x37c) from [<80008080>] (0x80008080)
<4>---[ end trace 1b75b31a2719ed1e ]---
<3>Trying disable clock dss_fck with 0 usecount
<4>------------[ cut here ]------------
<4>WARNING: at arch/arm/plat-omap/clock.c:65 clk_disable+0x48/0x80()
<d>Modules linked in:
[<c004f54c>] (unwind_backtrace+0x0/0xf0) from [<c00939e0>] (warn_slowpath_common+0x4c/0x64)
[<c00939e0>] (warn_slowpath_common+0x4c/0x64) from [<c0093a10>] (warn_slowpath_null+0x18/0x1c)
[<c0093a10>] (warn_slowpath_null+0x18/0x1c) from [<c006d288>] (clk_disable+0x48/0x80)
[<c006d288>] (clk_disable+0x48/0x80) from [<c00598f4>] (_disable_clocks+0x18/0xa4)
[<c00598f4>] (_disable_clocks+0x18/0xa4) from [<c005a164>] (_omap_hwmod_enable+0x124/0x158)
[<c005a164>] (_omap_hwmod_enable+0x124/0x158) from [<c005a260>] (_setup+0x90/0x11c)
[<c005a260>] (_setup+0x90/0x11c) from [<c0058ab0>] (omap_hwmod_for_each+0x2c/0x70)
[<c0058ab0>] (omap_hwmod_for_each+0x2c/0x70) from [<c0058db8>] (omap_hwmod_late_init+0x64/0x88)
[<c0058db8>] (omap_hwmod_late_init+0x64/0x88) from [<c000f2e4>] (omap2_init_common_hw+0x70/0x8c)
[<c000f2e4>] (omap2_init_common_hw+0x70/0x8c) from [<c0013cd4>] (mapphone_init_irq+0x10/0x24)
[<c0013cd4>] (mapphone_init_irq+0x10/0x24) from [<c000b4b0>] (init_IRQ+0x30/0x3c)
[<c000b4b0>] (init_IRQ+0x30/0x3c) from [<c0008c08>] (start_kernel+0x1a0/0x37c)
[<c0008c08>] (start_kernel+0x1a0/0x37c) from [<80008080>] (0x80008080)
<4>---[ end trace 1b75b31a2719ed1f ]---
<4>------------[ cut here ]------------
<4>WARNING: at arch/arm/mach-omap2/omap_hwmod.c:1110 _omap_hwmod_enable+0x140/0x158()
omap_hwmod: dss_dispc: _wait_target_ready: -16 sysc: 00000000
<d>Modules linked in:
[<c004f54c>] (unwind_backtrace+0x0/0xf0) from [<c00939e0>] (warn_slowpath_common+0x4c/0x64)
[<c00939e0>] (warn_slowpath_common+0x4c/0x64) from [<c0093a78>] (warn_slowpath_fmt+0x2c/0x3c)
[<c0093a78>] (warn_slowpath_fmt+0x2c/0x3c) from [<c005a180>] (_omap_hwmod_enable+0x140/0x158)
[<c005a180>] (_omap_hwmod_enable+0x140/0x158) from [<c005a260>] (_setup+0x90/0x11c)
[<c005a260>] (_setup+0x90/0x11c) from [<c0058ab0>] (omap_hwmod_for_each+0x2c/0x70)
[<c0058ab0>] (omap_hwmod_for_each+0x2c/0x70) from [<c0058db8>] (omap_hwmod_late_init+0x64/0x88)
[<c0058db8>] (omap_hwmod_late_init+0x64/0x88) from [<c000f2e4>] (omap2_init_common_hw+0x70/0x8c)
[<c000f2e4>] (omap2_init_common_hw+0x70/0x8c) from [<c0013cd4>] (mapphone_init_irq+0x10/0x24)
[<c0013cd4>] (mapphone_init_irq+0x10/0x24) from [<c000b4b0>] (init_IRQ+0x30/0x3c)
[<c000b4b0>] (init_IRQ+0x30/0x3c) from [<c0008c08>] (start_kernel+0x1a0/0x37c)
[<c0008c08>] (start_kernel+0x1a0/0x37c) from [<80008080>] (0x80008080)
<4>---[ end trace 1b75b31a2719ed20 ]---
<4>omap_hwmod: dss_dispc: cannot be enabled (3)
<4>------------[ cut here ]------------
<4>WARNING: at arch/arm/mach-omap2/omap_hwmod.c:1110 _omap_hwmod_enable+0x140/0x158()
omap_hwmod: dss_dsi1: _wait_target_ready: -16 sysc: 00000000
<d>Modules linked in:
[<c004f54c>] (unwind_backtrace+0x0/0xf0) from [<c00939e0>] (warn_slowpath_common+0x4c/0x64)
[<c00939e0>] (warn_slowpath_common+0x4c/0x64) from [<c0093a78>] (warn_slowpath_fmt+0x2c/0x3c)
[<c0093a78>] (warn_slowpath_fmt+0x2c/0x3c) from [<c005a180>] (_omap_hwmod_enable+0x140/0x158)
[<c005a180>] (_omap_hwmod_enable+0x140/0x158) from [<c005a260>] (_setup+0x90/0x11c)
[<c005a260>] (_setup+0x90/0x11c) from [<c0058ab0>] (omap_hwmod_for_each+0x2c/0x70)
[<c0058ab0>] (omap_hwmod_for_each+0x2c/0x70) from [<c0058db8>] (omap_hwmod_late_init+0x64/0x88)
[<c0058db8>] (omap_hwmod_late_init+0x64/0x88) from [<c000f2e4>] (omap2_init_common_hw+0x70/0x8c)
[<c000f2e4>] (omap2_init_common_hw+0x70/0x8c) from [<c0013cd4>] (mapphone_init_irq+0x10/0x24)
[<c0013cd4>] (mapphone_init_irq+0x10/0x24) from [<c000b4b0>] (init_IRQ+0x30/0x3c)
[<c000b4b0>] (init_IRQ+0x30/0x3c) from [<c0008c08>] (start_kernel+0x1a0/0x37c)
[<c0008c08>] (start_kernel+0x1a0/0x37c) from [<80008080>] (0x80008080)
<4>---[ end trace 1b75b31a2719ed21 ]---
<4>omap_hwmod: dss_dsi1: cannot be enabled (3)
<4>------------[ cut here ]------------
<4>WARNING: at arch/arm/mach-omap2/omap_hwmod.c:1110 _omap_hwmod_enable+0x140/0x158()
omap_hwmod: dss_dsi2: _wait_target_ready: -16 sysc: 00000000
<d>Modules linked in:
[<c004f54c>] (unwind_backtrace+0x0/0xf0) from [<c00939e0>] (warn_slowpath_common+0x4c/0x64)
[<c00939e0>] (warn_slowpath_common+0x4c/0x64) from [<c0093a78>] (warn_slowpath_fmt+0x2c/0x3c)
[<c0093a78>] (warn_slowpath_fmt+0x2c/0x3c) from [<c005a180>] (_omap_hwmod_enable+0x140/0x158)
[<c005a180>] (_omap_hwmod_enable+0x140/0x158) from [<c005a260>] (_setup+0x90/0x11c)
[<c005a260>] (_setup+0x90/0x11c) from [<c0058ab0>] (omap_hwmod_for_each+0x2c/0x70)
[<c0058ab0>] (omap_hwmod_for_each+0x2c/0x70) from [<c0058db8>] (omap_hwmod_late_init+0x64/0x88)
[<c0058db8>] (omap_hwmod_late_init+0x64/0x88) from [<c000f2e4>] (omap2_init_common_hw+0x70/0x8c)
[<c000f2e4>] (omap2_init_common_hw+0x70/0x8c) from [<c0013cd4>] (mapphone_init_irq+0x10/0x24)
[<c0013cd4>] (mapphone_init_irq+0x10/0x24) from [<c000b4b0>] (init_IRQ+0x30/0x3c)
[<c000b4b0>] (init_IRQ+0x30/0x3c) from [<c0008c08>] (start_kernel+0x1a0/0x37c)
[<c0008c08>] (start_kernel+0x1a0/0x37c) from [<80008080>] (0x80008080)
<4>---[ end trace 1b75b31a2719ed22 ]---
<4>omap_hwmod: dss_dsi2: cannot be enabled (3)
<4>------------[ cut here ]------------
<4>WARNING: at arch/arm/mach-omap2/omap_hwmod.c:1110 _omap_hwmod_enable+0x140/0x158()
omap_hwmod: dss_hdmi: _wait_target_ready: -16 sysc: 00000000
<d>Modules linked in:
[<c004f54c>] (unwind_backtrace+0x0/0xf0) from [<c00939e0>] (warn_slowpath_common+0x4c/0x64)
[<c00939e0>] (warn_slowpath_common+0x4c/0x64) from [<c0093a78>] (warn_slowpath_fmt+0x2c/0x3c)
[<c0093a78>] (warn_slowpath_fmt+0x2c/0x3c) from [<c005a180>] (_omap_hwmod_enable+0x140/0x158)
[<c005a180>] (_omap_hwmod_enable+0x140/0x158) from [<c005a260>] (_setup+0x90/0x11c)
[<c005a260>] (_setup+0x90/0x11c) from [<c0058ab0>] (omap_hwmod_for_each+0x2c/0x70)
[<c0058ab0>] (omap_hwmod_for_each+0x2c/0x70) from [<c0058db8>] (omap_hwmod_late_init+0x64/0x88)
[<c0058db8>] (omap_hwmod_late_init+0x64/0x88) from [<c000f2e4>] (omap2_init_common_hw+0x70/0x8c)
[<c000f2e4>] (omap2_init_common_hw+0x70/0x8c) from [<c0013cd4>] (mapphone_init_irq+0x10/0x24)
[<c0013cd4>] (mapphone_init_irq+0x10/0x24) from [<c000b4b0>] (init_IRQ+0x30/0x3c)
[<c000b4b0>] (init_IRQ+0x30/0x3c) from [<c0008c08>] (start_kernel+0x1a0/0x37c)
[<c0008c08>] (start_kernel+0x1a0/0x37c) from [<80008080>] (0x80008080)
<4>---[ end trace 1b75b31a2719ed23 ]---
<4>omap_hwmod: dss_hdmi: cannot be enabled (3)
<4>------------[ cut here ]------------
<4>WARNING: at arch/arm/mach-omap2/omap_hwmod.c:1110 _omap_hwmod_enable+0x140/0x158()
omap_hwmod: dss_rfbi: _wait_target_ready: -16 sysc: 00000000
<d>Modules linked in:
[<c004f54c>] (unwind_backtrace+0x0/0xf0) from [<c00939e0>] (warn_slowpath_common+0x4c/0x64)
[<c00939e0>] (warn_slowpath_common+0x4c/0x64) from [<c0093a78>] (warn_slowpath_fmt+0x2c/0x3c)
[<c0093a78>] (warn_slowpath_fmt+0x2c/0x3c) from [<c005a180>] (_omap_hwmod_enable+0x140/0x158)
[<c005a180>] (_omap_hwmod_enable+0x140/0x158) from [<c005a260>] (_setup+0x90/0x11c)
[<c005a260>] (_setup+0x90/0x11c) from [<c0058ab0>] (omap_hwmod_for_each+0x2c/0x70)
[<c0058ab0>] (omap_hwmod_for_each+0x2c/0x70) from [<c0058db8>] (omap_hwmod_late_init+0x64/0x88)
[<c0058db8>] (omap_hwmod_late_init+0x64/0x88) from [<c000f2e4>] (omap2_init_common_hw+0x70/0x8c)
[<c000f2e4>] (omap2_init_common_hw+0x70/0x8c) from [<c0013cd4>] (mapphone_init_irq+0x10/0x24)
[<c0013cd4>] (mapphone_init_irq+0x10/0x24) from [<c000b4b0>] (init_IRQ+0x30/0x3c)
[<c000b4b0>] (init_IRQ+0x30/0x3c) from [<c0008c08>] (start_kernel+0x1a0/0x37c)
[<c0008c08>] (start_kernel+0x1a0/0x37c) from [<80008080>] (0x80008080)
<4>---[ end trace 1b75b31a2719ed24 ]---
<4>omap_hwmod: dss_rfbi: cannot be enabled (3)
<4>------------[ cut here ]------------
<4>WARNING: at arch/arm/mach-omap2/omap_hwmod.c:1110 _omap_hwmod_enable+0x140/0x158()
omap_hwmod: dss_venc: _wait_target_ready: -16 sysc: 00000000
<d>Modules linked in:
[<c004f54c>] (unwind_backtrace+0x0/0xf0) from [<c00939e0>] (warn_slowpath_common+0x4c/0x64)
[<c00939e0>] (warn_slowpath_common+0x4c/0x64) from [<c0093a78>] (warn_slowpath_fmt+0x2c/0x3c)
[<c0093a78>] (warn_slowpath_fmt+0x2c/0x3c) from [<c005a180>] (_omap_hwmod_enable+0x140/0x158)
[<c005a180>] (_omap_hwmod_enable+0x140/0x158) from [<c005a260>] (_setup+0x90/0x11c)
[<c005a260>] (_setup+0x90/0x11c) from [<c0058ab0>] (omap_hwmod_for_each+0x2c/0x70)
[<c0058ab0>] (omap_hwmod_for_each+0x2c/0x70) from [<c0058db8>] (omap_hwmod_late_init+0x64/0x88)
[<c0058db8>] (omap_hwmod_late_init+0x64/0x88) from [<c000f2e4>] (omap2_init_common_hw+0x70/0x8c)
[<c000f2e4>] (omap2_init_common_hw+0x70/0x8c) from [<c0013cd4>] (mapphone_init_irq+0x10/0x24)
[<c0013cd4>] (mapphone_init_irq+0x10/0x24) from [<c000b4b0>] (init_IRQ+0x30/0x3c)
[<c000b4b0>] (init_IRQ+0x30/0x3c) from [<c0008c08>] (start_kernel+0x1a0/0x37c)
[<c0008c08>] (start_kernel+0x1a0/0x37c) from [<80008080>] (0x80008080)
<4>---[ end trace 1b75b31a2719ed25 ]---
<4>omap_hwmod: dss_venc: cannot be enabled (3)
<4>omap_hwmod: iva: reset already de-asserted
<4>omap_hwmod: mailbox: resetting
<4>------------[ cut here ]------------
<4>WARNING: at arch/arm/mach-omap2/clock.c:335 omap2_clk_enable+0xbc/0x14c()
clock: mcpdm_fck: could not enable: -16
<d>Modules linked in:
[<c004f54c>] (unwind_backtrace+0x0/0xf0) from [<c00939e0>] (warn_slowpath_common+0x4c/0x64)
[<c00939e0>] (warn_slowpath_common+0x4c/0x64) from [<c0093a78>] (warn_slowpath_fmt+0x2c/0x3c)
[<c0093a78>] (warn_slowpath_fmt+0x2c/0x3c) from [<c0063334>] (omap2_clk_enable+0xbc/0x14c)
[<c0063334>] (omap2_clk_enable+0xbc/0x14c) from [<c006d1a4>] (clk_enable+0x3c/0x60)
[<c006d1a4>] (clk_enable+0x3c/0x60) from [<c00595b8>] (_enable_clocks+0x4c/0x9c)
[<c00595b8>] (_enable_clocks+0x4c/0x9c) from [<c005a0d0>] (_omap_hwmod_enable+0x90/0x158)
[<c005a0d0>] (_omap_hwmod_enable+0x90/0x158) from [<c005a260>] (_setup+0x90/0x11c)
[<c005a260>] (_setup+0x90/0x11c) from [<c0058ab0>] (omap_hwmod_for_each+0x2c/0x70)
[<c0058ab0>] (omap_hwmod_for_each+0x2c/0x70) from [<c0058db8>] (omap_hwmod_late_init+0x64/0x88)
[<c0058db8>] (omap_hwmod_late_init+0x64/0x88) from [<c000f2e4>] (omap2_init_common_hw+0x70/0x8c)
[<c000f2e4>] (omap2_init_common_hw+0x70/0x8c) from [<c0013cd4>] (mapphone_init_irq+0x10/0x24)
[<c0013cd4>] (mapphone_init_irq+0x10/0x24) from [<c000b4b0>] (init_IRQ+0x30/0x3c)
[<c000b4b0>] (init_IRQ+0x30/0x3c) from [<c0008c08>] (start_kernel+0x1a0/0x37c)
[<c0008c08>] (start_kernel+0x1a0/0x37c) from [<80008080>] (0x80008080)
<4>---[ end trace 1b75b31a2719ed26 ]---
<3>Trying disable clock mcpdm_fck with 0 usecount
<4>------------[ cut here ]------------
<4>WARNING: at arch/arm/plat-omap/clock.c:65 clk_disable+0x48/0x80()
<d>Modules linked in:
[<c004f54c>] (unwind_backtrace+0x0/0xf0) from [<c00939e0>] (warn_slowpath_common+0x4c/0x64)
[<c00939e0>] (warn_slowpath_common+0x4c/0x64) from [<c0093a10>] (warn_slowpath_null+0x18/0x1c)
[<c0093a10>] (warn_slowpath_null+0x18/0x1c) from [<c006d288>] (clk_disable+0x48/0x80)
[<c006d288>] (clk_disable+0x48/0x80) from [<c00598f4>] (_disable_clocks+0x18/0xa4)
[<c00598f4>] (_disable_clocks+0x18/0xa4) from [<c005a164>] (_omap_hwmod_enable+0x124/0x158)
[<c005a164>] (_omap_hwmod_enable+0x124/0x158) from [<c005a260>] (_setup+0x90/0x11c)
[<c005a260>] (_setup+0x90/0x11c) from [<c0058ab0>] (omap_hwmod_for_each+0x2c/0x70)
[<c0058ab0>] (omap_hwmod_for_each+0x2c/0x70) from [<c0058db8>] (omap_hwmod_late_init+0x64/0x88)
[<c0058db8>] (omap_hwmod_late_init+0x64/0x88) from [<c000f2e4>] (omap2_init_common_hw+0x70/0x8c)
[<c000f2e4>] (omap2_init_common_hw+0x70/0x8c) from [<c0013cd4>] (mapphone_init_irq+0x10/0x24)
[<c0013cd4>] (mapphone_init_irq+0x10/0x24) from [<c000b4b0>] (init_IRQ+0x30/0x3c)
[<c000b4b0>] (init_IRQ+0x30/0x3c) from [<c0008c08>] (start_kernel+0x1a0/0x37c)
[<c0008c08>] (start_kernel+0x1a0/0x37c) from [<80008080>] (0x80008080)
<4>---[ end trace 1b75b31a2719ed27 ]---
<4>------------[ cut here ]------------
<4>WARNING: at arch/arm/mach-omap2/omap_hwmod.c:1110 _omap_hwmod_enable+0x140/0x158()
omap_hwmod: omap-mcpdm-dai: _wait_target_ready: -16 sysc: 00000000
<d>Modules linked in:
[<c004f54c>] (unwind_backtrace+0x0/0xf0) from [<c00939e0>] (warn_slowpath_common+0x4c/0x64)
[<c00939e0>] (warn_slowpath_common+0x4c/0x64) from [<c0093a78>] (warn_slowpath_fmt+0x2c/0x3c)
[<c0093a78>] (warn_slowpath_fmt+0x2c/0x3c) from [<c005a180>] (_omap_hwmod_enable+0x140/0x158)
[<c005a180>] (_omap_hwmod_enable+0x140/0x158) from [<c005a260>] (_setup+0x90/0x11c)
[<c005a260>] (_setup+0x90/0x11c) from [<c0058ab0>] (omap_hwmod_for_each+0x2c/0x70)
[<c0058ab0>] (omap_hwmod_for_each+0x2c/0x70) from [<c0058db8>] (omap_hwmod_late_init+0x64/0x88)
[<c0058db8>] (omap_hwmod_late_init+0x64/0x88) from [<c000f2e4>] (omap2_init_common_hw+0x70/0x8c)
[<c000f2e4>] (omap2_init_common_hw+0x70/0x8c) from [<c0013cd4>] (mapphone_init_irq+0x10/0x24)
[<c0013cd4>] (mapphone_init_irq+0x10/0x24) from [<c000b4b0>] (init_IRQ+0x30/0x3c)
[<c000b4b0>] (init_IRQ+0x30/0x3c) from [<c0008c08>] (start_kernel+0x1a0/0x37c)
[<c0008c08>] (start_kernel+0x1a0/0x37c) from [<80008080>] (0x80008080)
<4>---[ end trace 1b75b31a2719ed28 ]---
<4>omap_hwmod: omap-mcpdm-dai: cannot be enabled (3)
<4>omap_hwmod: mcspi1: resetting
<4>omap_hwmod: mcspi2: resetting
<4>omap_hwmod: mcspi3: resetting
<4>omap_hwmod: mcspi4: resetting
<4>omap_hwmod: mmc1: resetting
<4>omap_hwmod: mmc2: resetting
<4>omap_hwmod: mmc3: resetting
<4>omap_hwmod: mmc4: resetting
<4>omap_hwmod: mmc5: resetting
<4>omap_hwmod: timer3: resetting
<4>omap_hwmod: timer4: resetting
<4>omap_hwmod: timer5: resetting
<4>omap_hwmod: timer6: resetting
<4>omap_hwmod: timer7: resetting
<4>omap_hwmod: timer8: resetting
<4>omap_hwmod: timer9: resetting
<4>omap_hwmod: timer11: resetting
<6>GPMC revision 6.0
<6>SmartReflex CLASS3 initialized
<6>OMAP clockevent source: GPTIMER1 at 32768 Hz
Console: colour dummy device 80x30
<6>Calibrating delay loop... <c>1996.68 BogoMIPS (lpj=7798784)
<6>pid_max: default: 32768 minimum: 301
<6>Security Framework initialized
<6>TOMOYO Linux initialized
Mount-cache hash table entries: 512
<6>Initializing cgroup subsys debug
<6>Initializing cgroup subsys cpuacct
<6>Initializing cgroup subsys freezer
<6>CPU: Testing write buffer coherency: ok
<2>***L3 standard error FIREWALL: SOURCE:OCMRAM at address 0x4000 Hdr=0x40802 MstAddr=0x0
[<c004f54c>] (unwind_backtrace+0x0/0xf0) from [<c005b9cc>] (l3_interrupt_handler+0x2a0/0x2e0)
[<c005b9cc>] (l3_interrupt_handler+0x2a0/0x2e0) from [<c00cab5c>] (handle_IRQ_event+0x24/0xc4)
[<c00cab5c>] (handle_IRQ_event+0x24/0xc4) from [<c00cca68>] (handle_level_irq+0xc8/0x144)
[<c00cca68>] (handle_level_irq+0xc8/0x144) from [<c0049084>] (asm_do_IRQ+0x84/0xc0)
[<c0049084>] (asm_do_IRQ+0x84/0xc0) from [<c0049c48>] (__irq_svc+0x48/0xe0)
Exception stack(0xdc437f10 to 0xdc437f58)
7f00: c06ef63c 60000013 00000000 00000000
7f20: c06ef600 dc40f8a0 0000002a c06ef63c c06ef620 00000000 60000013 00000000
7f40: 00000000 dc437f58 c00cb6a4 c051cf48 60000013 ffffffff
[<c0049c48>] (__irq_svc+0x48/0xe0) from [<c051cf48>] (_raw_spin_unlock_irqrestore+0x28/0x50)
[<c051cf48>] (_raw_spin_unlock_irqrestore+0x28/0x50) from [<c00cb6a4>] (__setup_irq+0x248/0x31c)
[<c00cb6a4>] (__setup_irq+0x248/0x31c) from [<c00cb830>] (request_threaded_irq+0xb8/0xfc)
[<c00cb830>] (request_threaded_irq+0xb8/0xfc) from [<c0011110>] (omap_l3_init+0xf0/0x12c)
[<c0011110>] (omap_l3_init+0xf0/0x12c) from [<c0049568>] (do_one_initcall+0x5c/0x1b8)
[<c0049568>] (do_one_initcall+0x5c/0x1b8) from [<c000865c>] (kernel_init+0x80/0x244)
[<c000865c>] (kernel_init+0x80/0x244) from [<c004acac>] (kernel_thread_exit+0x0/0x8)
<6>L310 cache controller enabled
<6>l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x1e470000

Haven't heard about this in some time (DroidX user). I believe we should all be excited about it.
*BTW if you keep this thread then just have a mod give you this second spot

Is this the start of custom kernels??
If so, I can't freakin wait! You da man!!
Sent from my DROID BIONIC using xda premium

This is great news.

The Bionic Man would be proud!

Nice job! That looks like you are getting very close.
Very exciting.

This is one of the biggest breakthroughs I've ever seen in the era of locked Motorola devices. Simply amazing.

Bump for awsome news
Sent from my DROID BIONIC using xda premium

I think I might love you.
Sent from my DROID BIONIC using xda premium

I was talking about this a month or so on the Droid 3 forums, perhaps Hashcode can help you out with enabling this in the Safestrap safe mode environment, it would be awesome
Droid 1 Rooted (ChevyNo1 0.9MV Kernel, LGB2.6)
Droid 3 Rooted (Hashcode gave me some Ice Cream)

This is so sweet!
Sent from my DROID BIONIC using XDA App

Bump
Sent from my Galaxy Nexus using XDA App

Does the radio shut down?

Did this thread die like the last one?
Droid 1 Rooted (ChevyNo1 0.9MV Kernel, LGB2.6)
Droid 3 Rooted (Hashcode gave me some Ice Cream)

Can someone please explain the significance of this to me?
Sincerely,
n00b

omg, wtf; it's been days since you last posted, what happened, is it dead? ohnoes....
No, this thread hasn't been abandoned; as much as I appreciate the thanks and congratulations they really do nothing to advance the development or this discussion.
For those that are unfamiliar, kexec is a special form of the reboot command; it shuts down the existing kernel and boots into a new kernel without going through the normal bootup sequence. This works similarly to 2ndinit hijacking, but at a much lower level: the system boots stock until the point kexec kicks in and reboots into a new kernel; because there is no bootloader involved, there are no restrictions over what kernel can be booted.
Ultimately, the goal for this is a better bootstrap where the phone can store multiple fxz files and boot whichever one is selected without reflashing, using a combination of kexec and loopback devices to hide the bootstrap, allowing even stock roms to be selected. (Yes, Hashcode is already aware of this; I ran the idea by him months ago, he wrote safestrap instead)
The kexec code is not limited to the Bionic in any way; it should work on anything with an omap4 CPU, including the Droid3, Razr and Razr Maxx.
When will all this be done?
I should explain that I've been doing this on my actual phone, which means that coding and testing happens only late at night, free time and sleep deprivation permitting.

I was hoping you were still around. I first learned of Kexec from a thread Kholk started a while back. I guess he had Kexec framework built, he just lacked someone to build kernels for testing. I am glad to see you still around, and thank you for doing what you do.
Droid 1 Rooted (ChevyNo1 0.9MV Kernel, LGB2.6)
Droid 3 Rooted (Hashcode gave me some Ice Cream)

This thread has been dead for almost a couple months...I assume that this turned out like all the other attempts at using the kexec method? Oh well, at least someone tried.

kennydied23 said:
This thread has been dead for almost a couple months...I assume that this turned out like all the other attempts at using the kexec method? Oh well, at least someone tried.
Click to expand...
Click to collapse
Currently there is a guy working on this, he got a CDMA RAZR from DroidRZR.com to test it out on, should also work on our phone as well.

embeem said:
I should explain that I've been doing this on my actual phone, which means that coding and testing happens only late at night, free time and sleep deprivation permitting.
Click to expand...
Click to collapse
How much would it help if the community came together to gather funds so that you can go to swappa.com or something and buy a test Bionic? Maybe if we just raised $450 for you or something.

[Q]Is possible to incease the usable RAM up to 700MB?

Well, It is acceptable using Xperia TX even just 642MB usable for Android system and apps, until play the Japanese game call "Kaku-San-Sei Million Arthur" (拡散性ミリオンアーサー, Google Play) which sometime reboot my phone suddenly.
Once I make disable some apps, the frequency of crashing the system is greatly reduced even it could some time cause that happen. Then I guess the RAM usage of this game could be a bit larger then Android try to get more RAM for it, but it is not successful then the system crashed and reboot.
I recognized that the usable RAM on my Xperia is much less than Samsung GALAXY S II (i9100) and even GALAXY Tab 10.1. And look at the iomem and kmsg:
Code:
00500000-00500fff : msm_ssbi.0
00700000-007060ff : hdmi_msm_qfprom_addr
0080207c-0080207f : slimbus_slew_reg
0080207c-0080207f : msm_slim_ctrl
01a01000-01a01fff : msm_etb
01a03000-01a03fff : msm_tpiu
01a04000-01a04fff : msm_funnel
01a1c000-01a1dfff : msm_etm
03000000-0327ffff : wcnss_mmio
03204000-032040ff : pil_riva
04100000-04100fff : kgsl_2d0_reg_memory
04100000-04100fff : kgsl-2d0
04200000-04200fff : kgsl_2d1_reg_memory
04200000-04200fff : kgsl-2d1
04300000-0431ffff : kgsl_3d0_reg_memory
04300000-0431ffff : kgsl-3d0
04400000-044fffff : msm_vidc.0
04500000-045fffff : vfe32
04500000-045fffff : msm_vfe
04600000-046fffff : msm_gemini.0
04700000-047effff : mipi_dsi
04800000-048003ff : csid
04800000-048003ff : msm_csid
04800400-048007ff : csid
04800400-048007ff : msm_csid
04800800-04800bff : ispif
04800800-04800bff : msm_ispif
04800c00-04800fff : csiphy
04800c00-04800fff : msm_csiphy
04801000-048013ff : csiphy
04801000-048013ff : msm_csiphy
04801400-048017ff : csiphy
04801400-048017ff : msm_csiphy
04801800-04801bff : csid
04801800-04801bff : msm_csid
04a00000-04a00fff : hdmi_msm_hdmi_addr
04e00000-04efffff : msm_rotator.0
05100000-051effff : mdp
05300000-053fffff : semc_vpe.0
05300000-053fffff : semc_vpe
08800000-088000ff : pil_qdsp6v4.1
08900000-089000ff : pil_qdsp6v4.2
08b00000-08b00003 : pil_qdsp6v4.2
08b00000-08b00003 : pil_qdsp6v4.1
12180000-121807ff : core_mem
12180800-12181fff : sdcc_dml_addr
12182000-12183fff : sdcc_bam_addr
12240000-12240fff : bamdma_dma
12244000-12247fff : bamdma_bam
12400000-124007ff : core_mem
12400800-12401fff : sdcc_dml_addr
12402000-12403fff : sdcc_bam_addr
12480000-12480003 : gsbi_qup_i2c_addr
12480000-12480003 : qup_i2c
124a0000-124a0fff : qup_phys_addr
124a0000-124a0fff : qup_i2c
12500000-12501000 : msm_hsusb
12500000-12501000 : msm_otg
12500000-12500fff : msm_hsusb_host
12520000-12520fff : msm_hsic_host
12800000-12803fff : pipe_mem
16200000-16200003 : gsbi_qup_i2c_addr
16200000-16200003 : qup_i2c
16280000-16280fff : qup_phys_addr
16280000-16280fff : qup_i2c
16300000-16300003 : gsbi_qup_i2c_addr
16300000-16300003 : qup_i2c
16380000-16380fff : qup_phys_addr
16380000-16380fff : qup_i2c
16500000-16500003 : gsbi_resource
16500000-16500003 : msm_serial_hs
16540000-16540fff : uartdm_resource
18320000-1841ffff : msm_dmov
18500000-1850ffff : qce.0
18500000-1850ffff : qcrypto.0
1a000000-1a000fff : gsbi_resource
1a040000-1a040fff : uartdm_resource
1a040000-1a040fff : msm_serial_hsl
1a200000-1a200003 : gsbi_qup_i2c_addr
1a200000-1a200003 : qup_i2c
1a280000-1a280fff : qup_phys_addr
1a280000-1a280fff : qup_i2c
1a500000-1a5001ff : msm_rng.0
28080000-28081fff : slimbus_physical
28080000-28081fff : msm_slim_ctrl
28084000-28085fff : slimbus_bam_physical
28084000-28085fff : msm_slim_ctrl
28800000-288000ff : pil_qdsp6v4.0
2a03f720-2a04071f : tz_log.0
80200000-88cfffff : System RAM
80300000-80c7094f : Kernel text
80d00000-80fb358b : Kernel data
88d00000-88d00fff : ramdumpinfo
88d01000-88d04fff : amsslog
88de0000-88dfffff : ram_console
90000000-ab4fffff : System RAM
b9902000-bfffffff : System RAM
Code:
[ 0.000000] Memory: 139MB 437MB 102MB = 678MB total
[ 0.000000] Memory: [COLOR="Red"]656612k/891116k available[/COLOR], 38676k reserved, 155640K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
[ 0.000000] vmalloc : 0xe1800000 - 0xfa000000 ( 392 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe1000000 ( 528 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .init : 0xc0008000 - 0xc004a000 ( 264 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0a70950 (9667 kB)
[ 0.000000] .data : 0xc0b00000 - 0xc0bca170 ( 809 kB)
[ 0.000000] .bss : 0xc0bca194 - 0xc0db358c (1957 kB)
comparing with GALAXY Tab 10.1
Code:
[ 0.000000] Memory: 511MB 230MB = 741MB total
[ 0.000000] Memory: [COLOR="Red"]738404k/738404k available[/COLOR], 309148k reserved, 104448K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
[ 0.000000] vmalloc : 0xe8800000 - 0xf8000000 ( 248 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe8000000 ( 640 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d7cd4 (6976 kB)
[ 0.000000] .init : 0xc06d8000 - 0xc070d860 ( 215 kB)
[ 0.000000] .data : 0xc070e000 - 0xc079b160 ( 565 kB)
[ 0.000000] .bss : 0xc079b184 - 0xc0a5d230 (2825 kB)
Then is it possible to recompile the kernel to adjust the drivers to make fully use of the RAM?

Modules on New JB Kernel

Has anyone else tried compiling and loading kernel modules for the new ROM?
I'm getting panics like this just after returning from the module_init function, even in a "hello world" style module that does absolutely nothing.
Guessing it won't work until we get the new kernel sources. (This was from compiling against a vanilla 3.1.10 tree).
Anyone know if it's possible to run the new stock Jelly Bean ROM with the ICS kernel?
Code:
<1>[13:03:10 00:11:38.645] Unable to handle kernel paging request at virtual address e7be5484
<1>[13:03:10 00:11:38.645] pgd = d37a0000
<1>[13:03:10 00:11:38.645] [e7be5484] *pgd=a6941811, *pte=00000000, *ppte=00000000
<0>[13:03:10 00:11:38.645] Internal error: Oops: 7 [#1] PREEMPT SMP
<4>[13:03:10 00:11:38.645] Modules linked in: max8971_forcer(-) bcmdhd raw_ip_net gator
<4>[13:03:10 00:11:38.645] CPU: 1 Not tainted (3.1.10-gedcab5a #1)
<4>[13:03:10 00:11:38.645] PC is at module_put+0x50/0x128
<4>[13:03:10 00:11:38.645] LR is at sys_init_module+0x1830/0x1a18
<4>[13:03:10 00:11:38.645] pc : [<c00a0a74>] lr : [<c00a377c>] psr: a0000013
<4>[13:03:10 00:11:38.645] sp : def8ded0 ip : def8def8 fp : def8def4
<4>[13:03:10 00:11:38.645] r10: 0000001c r9 : 00000024 r8 : 00000001
<4>[13:03:10 00:11:38.645] r7 : c00a377c r6 : 00000002 r5 : bf0807f8 r4 : bf0807f8
<4>[13:03:10 00:11:38.645] r3 : def8c000 r2 : e6ac4484 r1 : 01121000 r0 : 00000001
<4>[13:03:10 00:11:38.645] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
<4>[13:03:10 00:11:38.645] Control: 10c5387d Table: 937a004a DAC: 00000015

arararagi said:
Has anyone else tried compiling and loading kernel modules for the new ROM?
I'm getting panics like this just after returning from the module_init function, even in a "hello world" style module that does absolutely nothing.
Guessing it won't work until we get the new kernel sources. (This was from compiling against a vanilla 3.1.10 tree).
Anyone know if it's possible to run the new stock Jelly Bean ROM with the ICS kernel?
Code:
<1>[13:03:10 00:11:38.645] Unable to handle kernel paging request at virtual address e7be5484
<1>[13:03:10 00:11:38.645] pgd = d37a0000
<1>[13:03:10 00:11:38.645] [e7be5484] *pgd=a6941811, *pte=00000000, *ppte=00000000
<0>[13:03:10 00:11:38.645] Internal error: Oops: 7 [#1] PREEMPT SMP
<4>[13:03:10 00:11:38.645] Modules linked in: max8971_forcer(-) bcmdhd raw_ip_net gator
<4>[13:03:10 00:11:38.645] CPU: 1 Not tainted (3.1.10-gedcab5a #1)
<4>[13:03:10 00:11:38.645] PC is at module_put+0x50/0x128
<4>[13:03:10 00:11:38.645] LR is at sys_init_module+0x1830/0x1a18
<4>[13:03:10 00:11:38.645] pc : [<c00a0a74>] lr : [<c00a377c>] psr: a0000013
<4>[13:03:10 00:11:38.645] sp : def8ded0 ip : def8def8 fp : def8def4
<4>[13:03:10 00:11:38.645] r10: 0000001c r9 : 00000024 r8 : 00000001
<4>[13:03:10 00:11:38.645] r7 : c00a377c r6 : 00000002 r5 : bf0807f8 r4 : bf0807f8
<4>[13:03:10 00:11:38.645] r3 : def8c000 r2 : e6ac4484 r1 : 01121000 r0 : 00000001
<4>[13:03:10 00:11:38.645] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
<4>[13:03:10 00:11:38.645] Control: 10c5387d Table: 937a004a DAC: 00000015
Click to expand...
Click to collapse
I red just now the problem you posted and it's interesting, but since we got the JB sources...
It may be interesting still if we have some interesting feature from old kernel to port in new one.
Anyway, just for "developer sport" is interesting to know whats was specifically the fact or the code which can't make run modules.

Pesach85 said:
I red just now the problem you posted and it's interesting, but since we got the JB sources...
It may be interesting still if we have some interesting feature from old kernel to port in new one.
Anyway, just for "developer sport" is interesting to know whats was specifically the fact or the code which can't make run modules.
Click to expand...
Click to collapse
I think it was mostly to do with the compiler or flags used.
Not really worth investigating any more now that we can just change anything in the kernel sources.

It is problem when compiling with gnueabihf modules don't load.
Sent from my LG-P880 using xda app-developers app

OEM Unlock does not appear on the SM-A600T

Hello. When I go into Developer Settings on my Samsung Galaxy A6 (SM-A600T), OEM unlock is not displayed as an option. When I go to download mode (odin mode) to check the RMM state, the fields OEM lock and RMM state do not exist. I am running Android 8.0.0 and the software build number is R16NW.A600TUVU1ARIA. It has been more than 7 days and OEM unlock still doesn't appear. Please help me.

did you ever figure this out?

ctindell1981 said:
did you ever figure this out?
Click to expand...
Click to collapse
Nope. I am still struggling to find out what's wrong.

I went over to telegram and for a little hello. Or seems as though the bootloader is already unlocked. However we need some devs for making a proper twrp. This version of the a6 is USA only and is the only one with the exynos 7885.

Why can't I see the OEM Unlock toggle in Developer Settings if the bootloader is already unlocked?

Quick question.
ctindell1981 said:
I went over to telegram and for a little hello. Or seems as though the bootloader is already unlocked. However we need some devs for making a proper twrp. This version of the a6 is USA only and is the only one with the exynos 7885.
Click to expand...
Click to collapse
Still no luck on a proper TWRP?
---------- Post added at 05:58 PM ---------- Previous post was at 05:55 PM ----------
ctindell1981 said:
I went over to telegram and for a little hello. Or seems as though the bootloader is already unlocked. However we need some devs for making a proper twrp. This version of the a6 is USA only and is the only one with the exynos 7885.
Click to expand...
Click to collapse
ctindell1981 said:
did you ever figure this out?
Click to expand...
Click to collapse
He never figured it but have you? Been trying to root this phone for months

BiHanCummings said:
Still no luck on a proper TWRP?
---------- Post added at 05:58 PM ---------- Previous post was at 05:55 PM ----------
He never figured it but have you? Been trying to root this phone for months
Click to expand...
Click to collapse
So have I.

Still nothing. I apologise for such a long delayed response. I've a very chaotic life. I don't know how to build a TWRP fir the phone. The bootloader comes unlocked though. From my understanding any device with an exynos processor has the BL unlocked.

ctindell1981 said:
Still nothing. I apologise for such a long delayed response. I've a very chaotic life. I don't know how to build a TWRP fir the phone. The bootloader comes unlocked though. From my understanding any device with an exynos processor has the BL unlocked.
Click to expand...
Click to collapse
My previous phone had an exynos processor and was unlockable but it still displayed the OEM unlock option in Developer Settings. Why is the A600T different?

OEM Unlock Logcat
Here is the log that is generated when I open developer settings.
Code:
04-15 09:24:23.158 4025 6155 I vaultkeeper_service: VK 3.0.0 [Client] com.android.settings. => [Vault] RemoteLockControl. [CMD NO.] 357
04-15 09:24:23.159 4025 6155 I vaultkeeper_service: [CMD:REGISTERED]
04-15 09:24:23.159 4025 6155 I vaultkeeper_service: prepare done(0)
04-15 09:24:23.159 4025 6155 I vaultkeeper_service: Don't need pre-process to access partition
04-15 09:24:23.159 4025 6155 I vaultkeeper_service: preProcessing done(0)
04-15 09:24:23.159 4025 6155 I TeeSysClient: open mode set to: 0 [hardware/samsung_slsi/exynos7885/mobicore/ClientLib/src/common.cpp:343]
04-15 09:24:23.159 4025 6155 I TeeSysClient: driver version: v6.3 [hardware/samsung_slsi/exynos7885/mobicore/ClientLib/src/driver.cpp:71]
04-15 09:24:23.159 4025 6155 I TeeSysClient: driver open [hardware/samsung_slsi/exynos7885/mobicore/ClientLib/src/driver.cpp:84]
04-15 09:24:23.159 4025 6155 I TeeSysClient: Kinibi access granted by the driver [hardware/samsung_slsi/exynos7885/mobicore/ClientLib/src/common.cpp:217]
04-15 09:24:23.200 4025 6155 I vaultkeeper_service: openSession done(session id : 3585, device id : 0)
04-15 09:24:23.200 4025 6155 I vaultkeeper_service: notify done(session id : 3585, device id : 0)
04-15 09:24:23.249 4025 6155 I vaultkeeper_service: waitNotification done(session id : 3585, device id : 0)
04-15 09:24:23.250 4025 6155 I vaultkeeper_service: closeSession done(session id : 3585, device id : 0)
04-15 09:24:23.250 4025 6155 I TeeSysClient: driver closed [hardware/samsung_slsi/exynos7885/mobicore/ClientLib/src/driver.cpp:95]
04-15 09:24:23.250 4025 6155 I vaultkeeper_service: cmdProcessing done(0/357)
04-15 09:24:23.250 4025 6155 I vaultkeeper_service: int VWorker::postProcessing(client_rsp_t*): no request to access in steady
04-15 09:24:23.250 4025 6155 I vaultkeeper_service: postProcessing done(0)
04-15 09:24:23.250 4025 6155 I vaultkeeper_jni: runCommand Success.(TA ret = 0)
04-15 09:24:23.251 23997 23997 I RlcManager: query(void)
04-15 09:24:23.251 4025 6155 I vaultkeeper_service: VK 3.0.0 [Client] com.android.settings. => [Vault] RemoteLockControl. [CMD NO.] 5525
04-15 09:24:23.251 4025 6155 I vaultkeeper_service: [CMD:READ_UNSHELTERED]
04-15 09:24:23.251 4025 6155 I vaultkeeper_service: prepare done(0)
04-15 09:24:23.261 4025 6155 I vaultkeeper_service: All Zero
04-15 09:24:23.261 4025 6155 I vaultkeeper_service: preProcessing done(0)
04-15 09:24:23.261 4025 6155 I TeeSysClient: open mode set to: 0 [hardware/samsung_slsi/exynos7885/mobicore/ClientLib/src/common.cpp:343]
04-15 09:24:23.261 4025 6155 I TeeSysClient: driver version: v6.3 [hardware/samsung_slsi/exynos7885/mobicore/ClientLib/src/driver.cpp:71]
04-15 09:24:23.261 4025 6155 I TeeSysClient: driver open [hardware/samsung_slsi/exynos7885/mobicore/ClientLib/src/driver.cpp:84]
04-15 09:24:23.261 4025 6155 I TeeSysClient: Kinibi access granted by the driver [hardware/samsung_slsi/exynos7885/mobicore/ClientLib/src/common.cpp:217]
04-15 09:24:23.309 4025 6155 I vaultkeeper_service: openSession done(session id : 3585, device id : 0)
04-15 09:24:23.309 4025 6155 I vaultkeeper_service: notify done(session id : 3585, device id : 0)
04-15 09:24:23.372 4025 6155 I vaultkeeper_service: waitNotification done(session id : 3585, device id : 0)
04-15 09:24:23.374 4025 6155 I vaultkeeper_service: closeSession done(session id : 3585, device id : 0)
04-15 09:24:23.374 4025 6155 I TeeSysClient: driver closed [hardware/samsung_slsi/exynos7885/mobicore/ClientLib/src/driver.cpp:95]
04-15 09:24:23.374 4025 6155 I vaultkeeper_service: cmdProcessing done(0/5525)
04-15 09:24:23.374 4025 6155 I vaultkeeper_service: int VWorker::postProcessing(client_rsp_t*): no request to access in steady
04-15 09:24:23.374 4025 6155 I vaultkeeper_service: postProcessing done(0)
04-15 09:24:23.374 4025 6155 I vaultkeeper_jni: runCommand Success.(TA ret = 0)
04-15 09:24:23.375 23997 23997 D DevelopmentSettings: enableUnlock rlcState :
04-15 09:24:23.375 23997 23997 D DevelopmentSettings: enableUnlock : 1 = /dev/block/persistent / 2 = 1

Here is a picture of developer settings.

This phone is equipped with a Exynos 7884 CPU. We only need a custom recovery. When will someone be nice to make a TWRP for this phone?

So I'm starting to try to wrap my head around compiling a TWRP for our phones. Once I start to better understand I will seek out testers. If anyone wants to help me so I can get on the fasttrack and whatnot so this can come into fruition quicker. Please, PM me. I'm a single, full-time father and caregiver to my disabled father, so my life is chaotic and sometimes it takes me a while to get back to a project. Communication with me is easier through Facebook.

couldnt u just use the source from the other variants and add the files for this variant and compile for our device instead of the others??

[ROM][UNOFFICIAL-ABANDONED][11] LineageOS 18.1 for Samsung Galaxy S5 (klte*)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 11, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps) . LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Base source code is available in the LineageOS Github repo. And if you would like to contribute to the project, please visit our Gerrit Code Review.
Device source code:
msm8974-common (shared by all Samsung msm8974 devices): LineageOS/android_device_samsung_msm8974-common
klte-common (shared by all klte* devices): LineageOS/android_device_samsung_klte-common
klte: LineageOS/android_device_samsung_klte
klteactivexx: LineageOS/android_device_samsung_klteactivexx
kltechn: LineageOS/android_device_samsung_kltechn
kltechnduo: LineageOS/android_device_samsung_kltechnduo
klteduos: LineageOS/android_device_samsung_klteduos
kltedv: LineageOS/android_device_samsung_kltedv
kltekdi: LineageOS/android_device_samsung_kltekdi
kltekor: LineageOS/android_device_samsung_kltekor
Kernel source code:
LineageOS/android_kernel_samsung_msm8974
My picks:
https://github.com/haggertk/cm_build_stuff/blob/lineage-18.1/picks.sh (other than the open device/kernel changes on gerrit)
Build Compatibility:
The noted models are the only ones supported. If you have a model that isn't listed and ask politely then I might work to add compatibility.​
BuildModelklteSM-G900F, SM-G900M, SM-G900R4, SM-G900R7, SM-G900T, SM-G900V, SM-G900W8klteactivexxSM-G870FklteaioSM-G900AZ, SM-S902LkltechnSM-G9006V, SM-G9008VkltechnduoSM-G9006W, SM-G9008W, SM-G9009WklteduosSM-G900FD, SM-G900MDkltedvSM-G900I, SM-G900PkltekdiSC-04F, SCL23kltekorSM-G900K, SM-G900L, SM-G900S
Downloads:
https://androidfilehost.com/?w=files&flid=321278
Installation Instructions:
Download latest build
Boot into recovery
Lineage recovery images are included in the download section and that's what I support. If you feel like using TWRP and something isn't working then take it up with the TWRP maintainer
If not updating from one of my earlier unofficial builds, then format/system, /data, and /cache
For Lineage recovery:
Format -> Format data/factory reset (this does /data and /cache)
Format -> Format system partition
For TWRP figure it out. And no, "wipe data" isn't the same as formatting data
Install LineageOS zip
If this is your initial installation of LineageOS 18.1, then flash any addons (e.g., gapps)
Reporting Bugs:
DO NOT even think about reporting bugs if you are running a custom kernel, Magisk, or Xposed
Grab a logcat after the problem has occurred
If there is a random reboot then grab /proc/last_kmsg. A logcat AFTER the reboot will be worthless
Note which build AND device you have
Read the thread, at least the last month's worth of posts. Don't report things that others already have.
Compatibility Notes:
Bootloader version doesn't matter. Anyone who tells you so doesn't know what they are taking about. My Developer Edition G900V is still running the original 4.4.2 KK aboot. My G900W8 is running the latest 6.0.1.
All builds except for klteactivexx MUST be running a marshmallow (6.0.1) radio for RIL to work. If you are about to report that RIL/radio isn't working then I pretty much guarantee this is your issue.
You MUST be running a marshmallow (6.0.1) NON-HLOS for the fingerprint reader to work. If you are about to report a fingerprint reader problem then you either have old firmware (update it), your /data was previously encrypted and you performed a "clean" flash without FORMATTING /data (start over and FORMAT /data), or your reader is just broken.
External SD cards don't support POSIX (ext*, f2fs) or NTFS filesystems anymore. It was kind of broken in 17 and we likely won't merge the changes to add it back in for 18. I'm not going to pick the open changes to re-add support because I'm not going to deal with "but it worked on haggertk's unofficial builds" bug reports after we eventually go official. If this affects you then just bite the bullet, copy any data off you really want to save, and reformat as exfat.
Donations:
I absolutely don't personally accept them. If you really feel that this work deserves it, then find a local food bank or animal shelter/rescue and throw some money their way. You can also throw some the way of LineageOS, but we're actually doing pretty well right now.

Reserved -- just in case.

Tx so much for keeping our beloved S5 alive

Thank you Mr. @haggertk for keeping our old S5 up to date.
It's not mentioned in the OP @ the present but could you tell me please if SELinux is set to Permissive or Enforcing?
If it's SELinux Permissive would you say that it's not ready to be used as a daily driver with important user accounts @ the present?
***

curiousrom said:
Thank you Mr. @haggertk for keeping our old S5 up to date.
It's not mention in the OP @ the present but could you tell me please if SELinux is set to Permissive or Enforcing?
If it's SELinux Permissive would you say that it's not ready to be used as a daily driver with important user accounts @ the present?
***
Click to expand...
Click to collapse
Hi
I already flashed and it is enforcing

G900T.. CrDroid 7.0 lineage-18.1-20201225-INOFFICIAL-klte.zip... BitGapps v19 .. Magisk 21.1 ... TWRP 3.4... latest Modem.
Radio: G900TUVU1GRJ1 (6.0.1)
Good news: mostly everything works fine (including cellular data, calls, apps).
Problems: Google Maps crash (have to use incognito mode as workaround), Location data limited to GPS only (not AGPS/cellular).
Abnormal errors (most were there in previous releases, and these are periodic/frequent, seen in some other 18.x ROMs):
AGPS Location (partly related to BitGapps v19):
12-28 09:22:53.058 2118 2118 E IndoorOutdoorPredictor: Failed:
12-28 09:22:53.058 2118 2118 E IndoorOutdoorPredictor: java.lang.SecurityException: uid 10005 does not have android.permission.ACCESS_FINE_LOCATION.
12-28 09:22:53.058 2118 2118 E IndoorOutdoorPredictor: at android.os.Parcel.createExceptionOrNull(Parcel.java:2373)
12-28 09:18:28.399 866 1040 W ActivityManager: Appop Denial: Accessing service com.google.android.gms/com.google.android.location.internal.server.GoogleLocationService from pid=2118, uid=10005 requires appop COARSE_LOCATION
TCP read errors:
12-28 09:29:36.462 1321 2335 E TcpSocketTracker: Unexpected socket info parsing, family 10 buffer:java.nio.HeapByteBuffer[pos=96 lim=588 cap=60000] xAAAABQAAgAAAAAAKQUAAAoBAADVBBRsAAAAAAAAAAAAAP//CsRBmgAAAAAAAAAAAAD//0p9ibwAAAAAAIt51wAAA
....
12-28 09:29:36.469 1321 2335 E TcpSocketTracker: java.lang.IllegalArgumentException: Bad position 65632/588
12-28 09:29:36.469 1321 2335 E TcpSocketTracker: at java.nio.Buffer.position(Buffer.java:259)
12-28 09:29:36.469 1321 2335 E TcpSocketTracker: at java.nio.ByteBuffer.position(ByteBuffer.java:812)
12-28 09:29:36.469 1321 2335 E TcpSocketTracker: at com.android.networkstack.netlink.TcpSocketTracker.skipRemainingAttributesBytesAligned(TcpSocketTracker.java:427)
Missing hardware:
12-28 09:27:59.244 0 0 E sdhci_msm_vreg_disable: vdd-io Cannot find Regulator
12-28 09:27:59.253 0 0 E samsung_dsi_panel_event_handler: unknown event (7)
RIL:
12-28 09:23:00.594 474 815 E RIL-QMI : qmuxd: TX message on fd=21, to qmux_client_id=0x1, len=72
12-28 09:23:00.596 474 474 E RIL-QMI : qmuxd: RX 47 bytes on fd=21 from qmux_client_id=0x1

Thank you. And if anyone built with signature spoofing, please contact me. We still have no convenient method to patch android 11 after building.

ttesty said:
G900T.. CrDroid 7.0 lineage-18.1-20201225-INOFFICIAL-klte.zip... BitGapps v19 .. Magisk 21.1 ... TWRP 3.4... latest Modem.
Radio: G900TUVU1GRJ1 (6.0.1)
Good news: mostly everything works fine (including cellular data, calls, apps).
Problems: Google Maps crash (have to use incognito mode as workaround), Location data limited to GPS only (not AGPS/cellular).
Abnormal errors (most were there in previous releases, and these are periodic/frequent, seen in some other 18.x ROMs):
AGPS Location (partly related to BitGapps v19):
12-28 09:22:53.058 2118 2118 E IndoorOutdoorPredictor: Failed:
12-28 09:22:53.058 2118 2118 E IndoorOutdoorPredictor: java.lang.SecurityException: uid 10005 does not have android.permission.ACCESS_FINE_LOCATION.
12-28 09:22:53.058 2118 2118 E IndoorOutdoorPredictor: at android.os.Parcel.createExceptionOrNull(Parcel.java:2373)
12-28 09:18:28.399 866 1040 W ActivityManager: Appop Denial: Accessing service com.google.android.gms/com.google.android.location.internal.server.GoogleLocationService from pid=2118, uid=10005 requires appop COARSE_LOCATION
TCP read errors:
12-28 09:29:36.462 1321 2335 E TcpSocketTracker: Unexpected socket info parsing, family 10 buffer:java.nio.HeapByteBuffer[pos=96 lim=588 cap=60000] xAAAABQAAgAAAAAAKQUAAAoBAADVBBRsAAAAAAAAAAAAAP//CsRBmgAAAAAAAAAAAAD//0p9ibwAAAAAAIt51wAAA
....
12-28 09:29:36.469 1321 2335 E TcpSocketTracker: java.lang.IllegalArgumentException: Bad position 65632/588
12-28 09:29:36.469 1321 2335 E TcpSocketTracker: at java.nio.Buffer.position(Buffer.java:259)
12-28 09:29:36.469 1321 2335 E TcpSocketTracker: at java.nio.ByteBuffer.position(ByteBuffer.java:812)
12-28 09:29:36.469 1321 2335 E TcpSocketTracker: at com.android.networkstack.netlink.TcpSocketTracker.skipRemainingAttributesBytesAligned(TcpSocketTracker.java:427)
Missing hardware:
12-28 09:27:59.244 0 0 E sdhci_msm_vreg_disable: vdd-io Cannot find Regulator
12-28 09:27:59.253 0 0 E samsung_dsi_panel_event_handler: unknown event (7)
RIL:
12-28 09:23:00.594 474 815 E RIL-QMI : qmuxd: TX message on fd=21, to qmux_client_id=0x1, len=72
12-28 09:23:00.596 474 474 E RIL-QMI : qmuxd: RX 47 bytes on fd=21 from qmux_client_id=0x1
Click to expand...
Click to collapse
This seemed to fix a few of the problems. Some of the problems might not be exclusive to the ROM - rather GAPPS etc:
pm grant com.google.android.gms android.permission.ACCESS_COARSE_LOCATION
pm grant com.google.android.gms android.permission.ACCESS_FINE_LOCATION

Just installed this. Smooth af.

Once again thanks a lot Mr Haggertk for bringing android 11 to our beloved Samsung Galaxy S5. Here are some screenshots made with my SM-G900F

Thanks for all your hard work <3

gaindelioide said:
...Here are some screenshots made with my SM-G900F
Click to expand...
Click to collapse
Thanks for the effort but 2 comments:
You should not post personal data like your device's IMEI & Vorschau > Eindeutige id. You could black them out with an image editor or just delete those screenshots.
Because the common language in this thread is English maybe you could change the System language to that before taking the screenshots?
How does the Settings panel looks like?
***
And for you guys who ran LineageOS 17.1 previously: any noticeable changes you could comment on?
***

Pretty stable. I get a lot of these messages for many different applications and during boot time. Probably normal page faults (data missing from memory).
12-30 00:24:14.808 0 0 F : pgd = d4dbc000
12-30 00:24:14.808 0 0 F : [00000000] *pgd=00000000
12-30 00:24:14.808 0 0 W Pid : 32432, comm: hone.app2sd.pro
12-30 00:24:14.808 0 0 W : CPU: 0 Tainted: G W (3.4.113-lineageos-g11473dbb0031 #18)
12-30 00:24:14.808 0 0 W : PC is at 0x7215022a
12-30 00:24:14.808 0 0 W : LR is at 0x72150227
12-30 00:24:14.808 0 0 W pc : [<7215022a>] lr : [<72150227>] psr: 600e0030
12-30 00:24:14.808 0 0 W sp : be853ce0 ip : 00000000 fp : be853d4c
12-30 00:24:14.808 0 0 W : r10: 136b32c0 r9 : ade4ce00 r8 : 00000000
12-30 00:24:14.808 0 0 W : r7 : 00000000 r6 : 136b32c0 r5 : 00000000 r4 : 00000000
12-30 00:24:14.808 0 0 W : r3 : 00000001 r2 : 00000000 r1 : 00000000 r0 : 717b4f84
12-30 00:24:14.808 0 0 W Flags : nZCv IRQs on FIQs on Mode USER_32 ISA Thumb Segment user
12-30 00:24:14.808 0 0 W Control : 10c5787d Table: 14dbc06a DAC: 00000015
12-30 00:24:14.808 0 0 W : [<c010be28>] (unwind_backtrace+0x0/0xec) from [<c01121a8>] (__do_user_fault+0x100/0x14c)
12-30 00:24:14.808 0 0 W : [<c01121a8>] (__do_user_fault+0x100/0x14c) from [<c011251c>] (do_page_fault+0x328/0x36c)
12-30 00:24:14.808 0 0 W : [<c011251c>] (do_page_fault+0x328/0x36c) from [<c0100358>] (do_DataAbort+0x10c/0x200)
12-30 00:24:14.808 0 0 W : [<c0100358>] (do_DataAbort+0x10c/0x200) from [<c01059d4>] (__dabt_usr+0x34/0x40)
12-30 00:24:14.808 0 0 W : Exception stack(0xd222bfb0 to 0xd222bff8)
12-30 00:24:14.808 0 0 W bfa0 : 717b4f84 00000000 00000000 00000001
12-30 00:24:14.808 0 0 W bfc0 : 00000000 00000000 136b32c0 00000000 00000000 ade4ce00 136b32c0 be853d4c
12-30 00:24:14.808 0 0 W bfe0 : 00000000 be853ce0 72150227 7215022a 600e0030 ffffffff
12-30 00:29:17.388 0 0 F : pgd = d8634000
12-30 00:29:17.388 0 0 F : [00000000] *pgd=00000000
12-30 00:29:17.388 0 0 W Pid : 4629, comm: verycallcontrol
12-30 00:29:17.388 0 0 W : CPU: 0 Tainted: G W (3.4.113-lineageos-g11473dbb0031 #18)
12-30 00:29:17.388 0 0 W : PC is at 0x7215022a
12-30 00:29:17.388 0 0 W : LR is at 0x72150227
12-30 00:29:17.388 0 0 W pc : [<7215022a>] lr : [<72150227>] psr: 600b0030
12-30 00:29:17.388 0 0 W sp : be854930 ip : 00000000 fp : 132bb498
12-30 00:29:17.388 0 0 W : r10: 132bc0a8 r9 : ade4ce00 r8 : 00000000
12-30 00:29:17.388 0 0 W : r7 : 00000000 r6 : 132bc0a8 r5 : 00000000 r4 : be8529b8
12-30 00:29:17.388 0 0 W : r3 : 00000001 r2 : 00000000 r1 : 00000000 r0 : 717b4f84
12-30 00:29:17.388 0 0 W Flags : nZCv IRQs on FIQs on Mode USER_32 ISA Thumb Segment user
12-30 00:29:17.388 0 0 W Control : 10c5787d Table: 1863406a DAC: 00000015
12-30 00:29:17.388 0 0 W : [<c010be28>] (unwind_backtrace+0x0/0xec) from [<c01121a8>] (__do_user_fault+0x100/0x14c)
12-30 00:29:17.388 0 0 W : [<c01121a8>] (__do_user_fault+0x100/0x14c) from [<c011251c>] (do_page_fault+0x328/0x36c)
12-30 00:29:17.388 0 0 W : [<c011251c>] (do_page_fault+0x328/0x36c) from [<c0100358>] (do_DataAbort+0x10c/0x200)
12-30 00:29:17.388 0 0 W : [<c0100358>] (do_DataAbort+0x10c/0x200) from [<c01059d4>] (__dabt_usr+0x34/0x40)
12-30 00:29:17.388 0 0 W : Exception stack(0xd86b9fb0 to 0xd86b9ff8)
12-30 00:29:17.388 0 0 W 9fa0 : 717b4f84 00000000 00000000 00000001
12-30 00:29:17.388 0 0 W 9fc0 : be8529b8 00000000 132bc0a8 00000000 00000000 ade4ce00 132bc0a8 132bb498
12-30 00:29:17.388 0 0 W 9fe0 : 00000000 be854930 72150227 7215022a 600b0030 ffffffff
12-30 00:29:17.616 0 0 E [SSP] : proximity_open_calibration - Can't open cancelation file
12-30 00:29:17.616 0 0 E [SSP] : set_proximity_threshold - SENSOR_PROXTHRESHOLD

How's the gaming performance? Has anyone tested it with PUBGM or CoDM?

curiousrom said:
Thanks for the effort but 2 comments:
You should not post personal data like your device's IMEI & Vorschau > Eindeutige id. You could black them out with an image editor or just delete those screenshots.
Because the common language in this thread is English maybe you could change the System language to that before taking the screenshots?
How does the Settings panel looks like?
***
And for you guys who ran LineageOS 17.1 previously: any noticeable changes you could comment on?
***
Click to expand...
Click to collapse
Hi curiousrom,
Thank you for yours advices. Could you please tell me precisely what you mean with the "Settings panel"? The QS panel or the General Settings panel?
I can tell you that since I flashed the ROM I have not had any particular issue worth a mention in my system. Only WhatsApp crashes from time to time. The phone app is behaving the way I expected it. The sensor is functioning properly since I do not see a black screen anymore after a call. With LineageOS 17.1 that still persist.
I will stay in touch through this thread for reporting any misbehavior of the system. Mr Haggertk is really doing a great job for the owners of our legendary device Samsung Galaxy S5. I own an SM-G900F.

Some of the unhandled page faults on startup (there are many):
[ 60.743339] CPU: 1 Tainted: G W (3.4.113-lineageos-g11473dbb0031 #18)
[ 60.743345] PC is at 0x7118e758
[ 60.743348] LR is at 0x7118e755
[ 60.743353] pc : [<7118e758>] lr : [<7118e755>] psr: 60000030
[ 60.743355] sp : 92bec890 ip : 00000000 fp : 92bec904
[ 60.743359] r10: 92bec940 r9 : ac1f1400 r8 : 00000000
[ 60.743364] r7 : 137cbb60 r6 : 00000000 r5 : 00000000 r4 : 57fb4540
[ 60.743368] r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : 70831754
[ 60.743374] Flags: nZCv IRQs on FIQs on Mode USER_32 ISA Thumb Segment user
[ 60.743379] Control: 10c5787d Table: 2489c06a DAC: 00000015
[ 60.743399] [<c010be28>] (unwind_backtrace+0x0/0xec) from [<c01121a8>] (__do_user_fault+0x100/0x14c)
[ 60.743410] [<c01121a8>] (__do_user_fault+0x100/0x14c) from [<c011251c>] (do_page_fault+0x328/0x36c)
[ 60.743419] [<c011251c>] (do_page_fault+0x328/0x36c) from [<c0100358>] (do_DataAbort+0x10c/0x200)
[ 60.743429] [<c0100358>] (do_DataAbort+0x10c/0x200) from [<c01059d4>] (__dabt_usr+0x34/0x40)
[ 60.743435] Exception stack(0xe3acdfb0 to 0xe3acdff8)
[ 60.743440] dfa0: 70831754 00000000 00000000 00000000
[ 60.743446] dfc0: 57fb4540 00000000 00000000 137cbb60 00000000 ac1f1400 92bec940 92bec904
[ 60.743452] dfe0: 00000000 92bec890 7118e755 7118e758 60000030 ffffffff
[ 60.778394] Thread-1: unhandled page fault (11) at 0x00000000, code 0x005
[ 60.778402] pgd = e489c000
[ 60.778591] [00000000] *pgd=00000000
[ 67.835852] Pid: 2836, comm: APIGuard3Backgr
[ 67.835860] CPU: 2 Tainted: G W (3.4.113-lineageos-g11473dbb0031 #18)
[ 67.835867] PC is at 0x7d48bc70
[ 67.835871] LR is at 0x712ba17f
[ 67.835877] pc : [<7d48bc70>] lr : [<712ba17f>] psr: 000f0030
[ 67.835880] sp : 7b20aa80 ip : 00000000 fp : 00000060
[ 67.835885] r10: 00000000 r9 : a9774e00 r8 : 00000000
[ 67.835891] r7 : 12cd26e8 r6 : 12cd24b8 r5 : 12cd2708 r4 : 710feac8
[ 67.835897] r3 : 70f53c50 r2 : 12cd2708 r1 : 00000000 r0 : 00000003
[ 67.835904] Flags: nzcv IRQs on FIQs on Mode USER_32 ISA Thumb Segment user
[ 67.835910] Control: 10c5787d Table: 1e69406a DAC: 00000015
[ 67.835932] [<c010be28>] (unwind_backtrace+0x0/0xec) from [<c01121a8>] (__do_user_fault+0x100/0x14c)
[ 67.835945] [<c01121a8>] (__do_user_fault+0x100/0x14c) from [<c011251c>] (do_page_fault+0x328/0x36c)
[ 67.835957] [<c011251c>] (do_page_fault+0x328/0x36c) from [<c0100358>] (do_DataAbort+0x10c/0x200)
[ 67.835969] [<c0100358>] (do_DataAbort+0x10c/0x200) from [<c01059d4>] (__dabt_usr+0x34/0x40)
[ 67.835976] Exception stack(0xdecdffb0 to 0xdecdfff8)
[ 67.835982] ffa0: 00000003 00000000 12cd2708 70f53c50
[ 67.835990] ffc0: 710feac8 12cd2708 12cd24b8 12cd26e8 00000000 a9774e00 00000000 00000060
[ 67.835998] ffe0: 00000000 7b20aa80 712ba17f 7d48bc70 000f0030 ffffffff

Minor issue. When logging in to my wifi which is wpa enterprise it requires a domain name as the phase 2 authentication defaults to MSCHAPV2 and has no option for "do not authenticate". Since I don't know my domain name is there a workaround?

haggertk said:
...
All builds except for klteactivexx MUST be running a marshmallow (6.0.1) radio for RIL to work. If you are about to report that RIL/radio isn't working then I pretty much guarantee this is your issue.
You MUST be running a marshmallow (6.0.1) NON-HLOS for the fingerprint reader to work. If you are about to report a fingerprint reader problem then you either have old firmware (update it), your /data was previously encrypted and you performed a "clean" flash without FORMATTING /data (start over and FORMAT /data), or your reader is just broken.
Click to expand...
Click to collapse
See S5 Odin Flashable Modem & Bootloader and S5 Screen Lock Fingerprint Battery Tests @ Idle - BetterBatteryStat.
***

It seems like my SC-04F doesn't show charging when I plugged in. The % goes up after rebooting.
Baseband: SC04FOMU1XQH1 (latest)
ROM Build: kltekdi, build 20201225
These are the logs when I only wiped System and Cache. I later formatted Data and it's still the same.
Thank you for your work!
e: Logcat: https://pastebin.pl/view/4de644ca
dmesg is the uploaded file.
e3: after formatting. Had to have Magisk to get dmesg log
dmesg: https://pastebin.pl/view/46bc06dc
logcat: https://pastebin.pl/view/1d2b50a8

Hey @haggertk, I have a SM-S902L. Can I use the rom for SM-S900L for my device? If not would you be so kind and add support for my model? I had been waiting for lineage 17.1 for quite some time now and installed an unofficial build to get android 10. I just found this amazing thread which is a way for me to get android 11. Please consider my request. Thanks