Related
I just got my Tilt. First I am going to hard reset and remove the AT&T bloatware. Then I am going to Install the HTC Home page. Next I am going to reasign the PTT button. Next, I am enable the 'H' icon and GPS photo. What else should I do/install? Any ideas are appreciated.
what about settings?
If you do this, will you lose all your AT&T settings (e.g., wap, etc)?
I have read that you do not lose the setting for wap, proxy, etc. I saw that you just lose the add programs. Has anyone done it? Did you have to add setting manually?
Yeah I did it. After the hard reset and the reset when it said it was going to apply the AT&T changes, I had to do this to get it to make calls, connect to the internet, and send text messages:
Nothing
All the settings are already there for connecting to wap.cingular etc right out of the gate, and none of that extra trial software garbage.
So let me see if I will be doing this right.
Hard reset the phone
when the phone says '..customizations will begin in 3 seconds...'
I press the reset button.
After it resets I should let it apply the AT&T changes.
Is that correct?
this is what i did. after i reset w/o the att bloatware.
Skip all that nonsense and just unlock and change over to the HTC ROM. IF I can do it ANYONE can do it. You'll be SOOO happy you did. The HTC ROM listed on the website I've found is faster (especially with camera function), less (read: none) bloatware, and prettier. Keyboard and PTT button fixes are included.
Then install agile, opera, TomTom... done.
h0mersimps0n said:
Skip all that nonsense and just unlock and change over to the HTC ROM. IF I can do it ANYONE can do it. You'll be SOOO happy you did. The HTC ROM listed on the website I've found is faster (especially with camera function), less (read: none) bloatware, and prettier. Keyboard and PTT button fixes are included.
Then install agile, opera, TomTom... done.
Click to expand...
Click to collapse
what website? i installed hardspl and tried running the kaisercustomruu but no luck gets com error. any help on flashing this phone to htc would be appreciated.
Just load the HTC Rom, it is good. About the network it will automatically update to AT&T. THe only applications you might lost is Cingular application like XM radio, Cingular vidoe.... You can always install via CABS you find @VP3G.
That is what I did. HTC runs pretty smooth... It is faster than the 8525 original. So far so good with 2 days on usage..BBC, GPS, Wifi, pursh mail, SMS..etc. no problem.
If you load the HTC Rom, will you lose your warranty with AT&T?
What's the difference between the "H" and "3G"? And if they are different how do you enable the "H" icon.
Yeah you will. And IMHO everything you'll get from the HTC ROM you can load onto the stock AT&T one using cabs. There's so much memory on this sucker I'm not even really worried about bloatware right now.
Yeah I'm looking forward to a good cooked ROM, but I think I'll wait awhile (probably near the end of my warranty period) before I do that. Especially since experimenting with this stuff right now is almost like beta testing ... The first HARD-SPL for this has just been released and personally I'd much rather wait until it is tried and tested before I do anything risky. AND since this sucker is so new, my guess would be that it'd be highly unlikely that you could revert back to factory settings to get warranty service if you do flash another ROM at this particular point in time ...
-Uninstall everything that came with it.
-Redo the Program icons
-KaiserTweak and adjust settings (no SMS confirm)
-TomTom (grab from a torrent site)
-AGPS registry change
-Skype
-Browsers
--MS Deepfish
--Picsel
--Opera Mini (create direct shortcut with Resco)
-TCPMP and FlashVideoBundle for Youtube access
-Chartcross GPS Test for GPS warmup
-HTC Kaiser Dialer + 3G-Batt Icons (vp3g's 3.5/3.6 addons)
-PocketNester + ROMs (haven't gotten 100% but I'm new)
But then again I've only had it 3 days and 2 nights
d12ag0n49 said:
What's the difference between the "H" and "3G"? And if they are different how do you enable the "H" icon.
Click to expand...
Click to collapse
3G icon indicates UMTS coverage. H indicicates HSDPA (and i assume HSUPA) when launched.
wow, HSUPA would be sweet, too bad unless you live in like chicago or newyork good luck getting it
Expand
pmow said:
...
-TCPMP and FlashVideoBundle for Youtube access
...
Click to expand...
Click to collapse
Wow you have been productive! Can you please expand on this process with detail. Do you have youtube working in IE or Opera? I have not yet got youtube videos working on my AT&T branded device. I dug around quite a bit for flash for Opera 8.65 but never found something to actually download. Thanks.
swamp2 said:
Wow you have been productive! Can you please expand on this process with detail. Do you have youtube working in IE or Opera? I have not yet got youtube videos working on my AT&T branded device. I dug around quite a bit for flash for Opera 8.65 but never found something to actually download. Thanks.
Click to expand...
Click to collapse
Go to the sticky in the main part of this thread, the one titled "Essential cabs for kaiser" or something like that.
Download the HTC Streaming media player. You can get m.youtube.com to work through IE without any issue. The HTC media player associates the rtsp:// to itself and it will stream videos.
laakness said:
Go to the sticky in the main part of this thread, the one titled "Essential cabs for kaiser" or something like that.
Download the HTC Streaming media player. You can get m.youtube.com to work through IE without any issue. The HTC media player associates the rtsp:// to itself and it will stream videos.
Click to expand...
Click to collapse
Yes but that's the mobile youtube site. I'm talking about the full youtube. IMHO the mobile site sucks because I can't see my favorites from the computer. You need TCPMP, .72 is preferred. And Skunkworks FlashVideoBundle is a plugin for FLV files. Basically you install TCPMP, then the plugin. Then under TCPMP settings you associate it with "Flash Video". I would also change the buffering settings to like 800kb, and 8% when underrun.
Completely optional, you can tell it to play automatically full screen, and exit TCPMP when done. So you just click a Youtube link, and it plays, and you're back at the site. Sweet, huh?
CABs attached.
EDIT: PIE is the only browser I can get this to work with, none of the other browsers I've tried will launch with the correct app.
pmow said:
Yes but that's the mobile youtube site. I'm talking about the full youtube. IMHO the mobile site sucks because I can't see my favorites from the computer. You need TCPMP, .72 is preferred. And Skunkworks FlashVideoBundle is a plugin for FLV files. Basically you install TCPMP, then the plugin. Then under TCPMP settings you associate it with "Flash Video". I would also change the buffering settings to like 800kb, and 8% when underrun.
Completely optional, you can tell it to play automatically full screen, and exit TCPMP when done. So you just click a Youtube link, and it plays, and you're back at the site. Sweet, huh?
CABs attached.
EDIT: PIE is the only browser I can get this to work with, none of the other browsers I've tried will launch with the correct app.
Click to expand...
Click to collapse
Thanks so much for the details. I installed both cabs and it works but only on a small % of videos. The error message I get on many when trying to play is, "Video not available (may have been removed)." This is really getting frustrating.
swamp2 said:
Thanks so much for the details. I installed both cabs and it works but only on a small % of videos. The error message I get on many when trying to play is, "Video not available (may have been removed)." This is really getting frustrating.
Click to expand...
Click to collapse
I've noticed that, but only on videos that require birthdate confirmation. Stop trying to watch porn
There may be a solution in one of the threads for this. Not sure.
Ok I have AT&T and while I'm working at AT&T (my job) I like to watch Lost on my breaks using Cingular Video. When I click on the link to launch video the damn Realplayer pops up and errors out. I have Schaps 4.31 ROM. I have TCPMP installed and want the video to default to that player. I checked the file associations and checked every box I saw and soft reset the phone, tried again and nothing. I can't go into the realplayer options because when the error pops up and i hit ok Realplayer quickly closes. I want to delete possible every trace of the program on my phone. I know I have to go through the registry but I don't want to delete anything that would potentially make my life a living hell being that I have so much stuff already on my phone. Can anyone help. Realplayer is useless.
Might not work but ya can try to go to the RealPlayer.exe itself in the Windows folder and rename it. If it's cooked into the ROM ya may not be able to though. Also, ya can go to it in the Windows folder itself and run it and it won't close down on ya, and that way you can get to the options. In options, you need to make sure it connects to MEdiaNet and not the internet, or you'll get an error every time.
Alemaker
it is connected to MEdia Net. I know all the settings in the back of my head. I troubleshoot customers phones everyday. Realplayer is buggin me. If I rename realplayer.exe to something else.. how would it open up in tcpmp.. wouldn't i have to re-do the registry so that it opens TCPMP.. i'll try it now and tell you how it goes. Thansk for the reply and sorry for my horrible punctuation.
Hi there, this is my first post on this great board.
First, thanks to all of you for helping me solve loads of problems with my Tilt. Thanks to xda-dev, my phone is really tricked out and great to work with (albeit with crippled video). This site is a fantastic resource, and populated with some very smart and talented people. I've been visiting this site every day since December, when I got my Tilt.
Up until now I've been able to solve all my problems just by reading the Wiki and searching, and I wouldn't start a new thread unless I'd already searched (MANY times) for an answer... but this one's driving me crazy.
Windows Media player will not open. When I click the icon, or an associated file, nothing happens. I don't particularly like WMP, I use CorePlayer instead... but WMP is needed for MP3 or WAV ringtones. So, when I try to select one, I get a message saying "This ringtone file is corrupt or unavailable."
The most relevant thread I could find was here: http://forum.xda-developers.com/archive/index.php/t-266527.html. Obviously the problem didn't get solved.
While searching, I also read about some other player (Pocket Music, I think) has the capacity to kill WMP, but I've never installed it. I only use CorePlayer and TCPMP.
I've tried deleting the MSMETADATA and WMDRM folders, I've tried checking file associations, and a few other things as well... No luck.
My phone is a bone-stock AT&T Tilt, no custom ROM. I'm really trying to avoid a hard-reset. Does anyone happen to know a solution for this?
Thanks in advance for any ideas you might have.
Try uninstalling Core Media Player
Thanks for the quick reply... I've tried uninstalling CorePlayer (and lots of other things), with no luck.
By way of a shameless bump...
I should add that .AMR and MIDI files still work as ringtones, but every other (useful) format does not.
Also, I was wondering if anyone has some kind of .CAB file of the actual WMP files, just in case I can fix this with a reinstall. I don't really know how much it would help, since WMP is already in ROM, but I'd really love to solve this without a hard reset if I can.
Thanks again, everyone.
OK... I feel bad bumping this again, but I'm going crazy trying to figure this out. I waited for a good month before I posted, trying to figure my own way out of this mess, and this is my last resort. This will be my last bump, I promise.
Has no one else run into this issue? Windows Media Player is dead. It won't open, and I'm fairly certain it's why my WAV or MP3 ringtones don't work.
I'd appreciate ANY ideas, no matter how off-the-wall they might sound... and if anyone has a cab file for WMP, that's also be a great help.
Thanks again for all you guys do.
Sounds like you have corrupted wmp registry, try the attached cab it will restore wmp registry (soft reset after install to apply changes).
Thank you VERY much, sakajati... but unfortunately, installing this cab (and soft-resetting) didn't work for me. I got pretty hopeful for a second there.
In case it matters, I got that post-install message about the software not working properly because it was designed for a previous version of Windows Mobile. I'm on a stock, unflashed, noob-approved Tilt.
sensei909 said:
Thank you VERY much, sakajati... but unfortunately, installing this cab (and soft-resetting) didn't work for me. I got pretty hopeful for a second there.
In case it matters, I got that post-install message about the software not working properly because it was designed for a previous version of Windows Mobile. I'm on a stock, unflashed, noob-approved Tilt.
Click to expand...
Click to collapse
That's strange! that error message should not pop up if you are really running wm6, you can ignore the message since it's only a warning and is not an error.
Just curious, did you really install it on wm6 device?
Yes, my Tilt is running WM6 Pro. I haven't done any 6.1 upgrading.
Ok I've build full wmp10 installer for you, grab it while you can!
Wow... Thanks so much for going out of your way to help me here.
Bad news, though, it didn't work... I still get the same problem. I click the icon, and absolutely nothing happens.
Just switch to pocket music, it is light years ahead of WMP in my opinion. I needed a player that worked with my bluetooth headphones, had an equalizer and an easy playlist manager. WMP does fit in some ways but it's interface sucks.
Jeff
I agree Jeff, I mainly use TCPMP or CorePlayer... the only reason I want WMP to work is because while it's broken, I can't use MP3 and WAV ringtones.
sakajati said:
Ok I've build full wmp10 installer for you, grab it while you can!
Click to expand...
Click to collapse
I had the same problem in that for some strange reason my WMP refuse to start and the system always freezes forcing me to soft reset. Your cab has solved my problem. Thanks a million
Hi, I have the same issue with my Trinity running original WM5 rom. Is it possible to find a clear full WMP9 installer for it, so I can hope to fix this annoying problem ? Thanks !
I ended up having to hard-reset to fix the problem. I was about due for some spring cleaning anyway.
I have a stock rom Blackjack II AT&T branded phone and have experienced this problem twice now. The first time around I ended up hard-resetting the phone to get media player and mp3 ringtones to work again.
This time I've tried installing the "full wmp10 installer" cab so linked above in this thread, but still a no go.
If anyone has even an off-handed guess at what might be causing this problem and/or how I might fix it without a hard-reset I would be forever grateful to hear it!
It seems like this might be a recurring problem on this phone, so I'm desperate to either figure out what's causing it or at least come up with a reasonably quick fix for it when it does happen.
Hi!
Sorry have to bump this thread too. My WMP doesn't start any more and I don't really want to use backup from 2 weeks ago. I tried installing both cabs with no result.
Is there some kind of debugging feature that can be used to track down the problem?
/Hessi
sakajati said:
Sounds like you have corrupted wmp registry, try the attached cab it will restore wmp registry (soft reset after install to apply changes).
Click to expand...
Click to collapse
How do I make this insllation?
Tried Installing the WMP 10
tried installing WMP 10, unfortunately, didn't work... =( huhu..... Anyway, do you think a hard reset will fix the problem? thanks
Does anyone know how to change the standard opera to make it view regular size webpages instead of only viewing mobile pages. I know there is a setting in settings but apparently that isn't making a difference. Has anyone else experienced this?
********EDIT***********
Solved thanks to d0ubl3_d1zzl3
d0ubl3_d1zzl3 said:
He is right. Go to a site like IPChicken.com and look at the Browser string under the 'Advanced' section and you'll see what Opera is reporting to each site you visit. Opera has a way to 'spoof' the User Agent to be like Firefox or IE 6 for example. Type in: about:config in the address bar, and scroll all the way down to User Agent and try 2 and 3 (Firefox & IE, respectively).
Click to expand...
Click to collapse
Hi
I don't have a problem with that, Always shows the "real" homepage, even youtube after installing the flash lite
hmm really?? everytime i go to youtube it takes me to m.youtube.com. Shoot even google goes to the mobile webpage. i wonder if i need to install flashlite to correct this? That doesn't make any sense though.
Try installing flashlite and see if its get any better =)
Didn't do a thing. When i got to youtube it takes me to m.youtube.com am i the only one with this problem?
Have you clicked on the link at the bottom which takes you to the full site and stores a cookie on your phone telling YouTube to send you to the full version next time?
Trying that as we speak
Yup just tried it and it works for youtube but other websites it doesn't. Like when i go to myspace and i click on view full desktop page it doesn't do anything besides go right back to the page i started at. I'm not sure what is going but it seems like maybe their are two different opera builds on these xperias. I wonder if that is possible
EDIT
I think it is the website i'm going to. Some just have errors i think. Has anyone tried to use orb.com? I can get it stream perfectly with IE but with Opera it tries to open it and it just crashes.
Orb works ok on opera for me as long as i can get a 3g signal
Everytime i try and use orb on opera it just crashes and closes. Did it work for you straight out of the box?
Since this thread is labelled in a general fashion, I'm not gonna open a new thread for my question, which is:
anybody managed to upgrade to a more recent Opera build?
The ones available work as in being able to browse the web, but they are buggy regarding keyboard input for example.
I upgraded to a newer version and it was extremely buggy. It crashed on me a couple of times. I like this one designed for the xperia. I don't like xperia's standard settings but after u change the settings its cool
One of the nice features of the touch pro was that the back button in opera was mapped to a hardware button. Is it possible to do this with the Xperia?
Yes straight out the box
j-s-w said:
Yes straight out the box
Click to expand...
Click to collapse
I still have an issue. I can get it to stream but its really laggy through opera unless i use this pls winamp format but then i get errors here and there. I run it through IE and it streams perfectly. I've spent about 2 hrs going through the settings trying to find the cause of it but i can't seem to find it. When you use orb what format are u streaming in and what player are u using?
Windows media format (.asx)
and windows media player on the phone
hmmm i don't know why my video lags so much even on wifi. Audio comes in perfect whatever video i play is horrible unless i use IE. Anyone have any ideas what could cause this?
Could the orb be playing up, I just tried on wifi on both opera and ie and only managed to get streaming work once out of a few attempts. Kept getting server is busy.
How can I reinstall the SE Opera version? Where's the cab at? I managed to bugger up my version and now it won't load
Do a hard reset
The new thread for Cinemo is here: http://forum.xda-developers.com/showthread.php?t=516695
If you download it, could you please let me know what you think about it? This is my first WinMo app and I would like it to be as great as it can be.
Thanks in advanc,
Daniel Gary
I love where this app could go.
Suggestions:
* Rotten Tomstoes or Metacritic ratings and sortings
* Favorite theater settingd
* Next day or week times
* Imdb link
Thanks for the program!
Wow. pretty good app. its not heavy and closes easily. is this seriously your first? the only thing it lacks that i could think of is landscape support and a mileage option so i can search a few miles outside of my zip. im in st louis so i have the option of theaters in illinois and missouri. it wont read both. but thats nitpicking on my part. great app. and good timing also. my pocket express movie showtimes expired today...
Looks like is for USA only; any plans for a worldwide version?
I tried to install in a spanish rom touch pro. The installation was ok, but when I try to open the app it gives an error...
I`m very interesting in this app...
Thank you in advance
Regards
@jesusishere
I love your ideas for the most part. I am not sure I can pull next day or next week showtimes(it depends on if a theater reports them early or not). But I certainly like the idea of a rotten tomatoes or metacritic score and an imdb link. Thanks for the input!
@justin747
I hadn't really considered landscape support that necessary since it doesn't require in text input throughout the app. What would you use it for exactly?
@DANDANA
I would love to implement a worldwide version. It's certainly something to think about
@jrbarricane
What error did you get when you opened the app?
Well, if i try to open the app without a connection, it gives me an error, but I can't tell you becouse it says that i need to have the .neterrormeseges... or something like that, installed (not the .net 3.5 that I do have it...).
If I open the app with a connetion (activesync or wifi) then it opens, but when I try to see the file of a movie, then gives me same error...
Sorry for my horrible english... I do my best...
jrbarricane said:
Well, if i try to open the app without a connection, it gives me an error, but I can't tell you becouse it says that i need to have the .neterrormeseges... or something like that, installed (not the .net 3.5 that I do have it...).
If I open the app with a connetion (activesync or wifi) then it opens, but when I try to see the file of a movie, then gives me same error...
Sorry for my horrible english... I do my best...
Click to expand...
Click to collapse
Yes, I just found the issue with movies with no showtimes in the area giving an error. I'm working to fix it right now.
also do you think you could possibly add:
Directions to the theater?
searching by specific movie? (To see where it is playing)
Searching by specific theater? (That one special theater you like)
Ill let you know of anything else i can think of.
ptyindian said:
also do you think you could possibly add:
Directions to the theater?
searching by specific movie? (To see where it is playing)
Searching by specific theater? (That one special theater you like)
Ill let you know of anything else i can think of.
Click to expand...
Click to collapse
"Searching by specific movie"
Isn't that how it works right now? You scroll to the movie you want, pick it, and there is a dropdown box of theaters to pick from?
As to the theaters, that is certainly something I have been planning on. It shouldn't take too much work.
yeah sorry i just did not realize the drop down box lol. Good work i love the app so far.
Outstanding application! Works fine on my Touch Pro.
Many Thanks!
I was thinking about writing something just like this. Awesome job. Where do you get your theater list?
danielgary said:
@jesusishere
I love your ideas for the most part. I am not sure I can pull next day or next week showtimes(it depends on if a theater reports them early or not). But I certainly like the idea of a rotten tomatoes or metacritic score and an imdb link. Thanks for the input!
@justin747
I hadn't really considered landscape support that necessary since it doesn't require in text input throughout the app. What would you use it for exactly?
Click to expand...
Click to collapse
Yea good point. i used it earlier today with great results. didnt even notice landscape was missing. i love the simplicity of it. i can find a movie time in like 20 seconds.
sorry... double post
works for canada?
I used to spend so much time trying to find movies in google through opera mobile!!
Way to go
how do you "enter" or select the new zip code, i see how to enter a new one, but not how to make that the zip code to find movies for
thanks
is this for the usa only??? cause im in australia and we only have 4 number postcodes.. hey can some1 try this for me plzz and reply back to see if it works with australia.. postcode 4001 thanks