Bettery/rom problem? - 8125, K-JAM, P4300, MDA Vario Software Upgrading

Hi everyone
So I have the battery problem-it`s not charging!
at start it showed all the time that it`s charging-eaven when it was unplugged!
so I searched and disabled the usb charging,through registry.
But then started another problem-it shows that it`s connected to wallcharger and so,and it shows it`s charging,and how full the battery is...BUT!
it`s all fake! it shows 100% but after few mins dies!It only charges and holds the power normaly only when i charge it through differient methods-with just ac adapter(just two wires-my brothers electrician so he knews how to..).
but it`s not the batterys fault-I just bought a new one.
So-what could be the problem,any ideas?
thanks and have a nice day
P.S.
I got it used.its G4
the info,that i found in it was:
ROM version:2.17.7.2 WWE
Radio version:02.07.10
So do you think that rom updeite could fix it?

I'm betting on hardware problem; maybe charging IC's or something but it's easier to just try a Hard-reset or flash a new ROM to see if it goes away. Only problem is battery must be over 50% to complete the upgrading

so which rom could be the best to upgrade to?

First get the battery fully charged somehow,it won't complete the rom flash if its below 50%,then download the official stock rom and flash it.

Related

8125 Bricked HELP !!!

I was trying to update my WM5 to WM6 I have the G4 8125 , now it wont turn on I plugged it in to the charger port and the light that shows it's charging doesn’t even come on. Last night after I was trying to update it went completely blank, I tried to run the Official AT&T RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship_1 and it wont even connect to my phone it gives me the connect error, every now and then last night it would show the boot loader screen but now its doing nothing someone HELP ME!!!!!!!!!!!! PLZZZ Does this mean my phone is bricked ???
Sounds like the battery is dead at a guess. As you have already seen the bootloader screen that is a good sign. You need to charge the battery away from the phone either in a cradle battery charger or another persons phone. If after charging the battery the phone is still dead I am afraid it maybe RIP.
I am sure others may help you far better than me though
Shew , i hope it is just the battery if its not the battery is thier anything else i can do for the phone ?
I am now in the same boat with my K JAM
What was you trying to do to your phone ? the same thing i was ?
emmanuel_harris32 said:
What was you trying to do to your phone ? the same thing i was ?
Click to expand...
Click to collapse
Basically but I have left the battery out for 30 mins and it has restarted
You can buy A charger which will charge the battery out of the phone on E bay
emmanuel_harris32 said:
I was trying to update my WM5 to WM6 I have the G4 8125 , now it wont turn on I plugged it in to the charger port and the light that shows it's charging doesn’t even come on. Last night after I was trying to update it went completely blank, I tried to run the Official AT&T RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship_1 and it wont even connect to my phone it gives me the connect error, every now and then last night it would show the boot loader screen but now its doing nothing someone HELP ME!!!!!!!!!!!! PLZZZ Does this mean my phone is bricked ???
Click to expand...
Click to collapse
Most important is to get your battery fully charged atleast, I think it has gone flat,how are you trying to charge the battery ?,it won't get charged through usb cable, cuz usb cable will not charge in bootloaders,it got have a working OS on the phone and only provides 0.5 amp(500 amp power),where as now it'll only start charging if you connect it to a 'Wall Charger' which provides 1 Amp (1000 Amp power), or get a charged battery from a friend and check if your phone gets into bootloaders,if it gets than my friend your saved.WELL,IF NOT,.....I'm afraid you gotta shinny expensive paper weight on ya desk.
which Upgrade Rom were you trying to flash and as you have a G4 device,what method did you adopt to flash the Rom ? a G4 device can only be upgraded through SoftSPL or HardSPL method in case upgrading to a custom build wm6 Rom and or can only be flashed with an official Rom.
Secondly ,if you flashed a G3 specific Rom which includes IPL/SPL in it,will definitely "BRICK" the phone
I just wanted to thank everyone for your help , i got my new battery in yesterday and my phone booted up flashed back to at&t orginal rom. Thank So Much.....

No Battery, stuck at tri-color screen

I was flashing my phone repeatedly last night. I've read the forums and have done about 4 successful flashes already. The problem is, I've found a WM6 rom for the Wizard that I wanted better than the ROM already inside my phone, and I proceeded to flash it. But I left the computer and phone by itself so that I could rest a bit (I've spent hours in front of the computer flashing my phone), and fell asleep. When I woke up, I noticed that the flashing failed, and it was at the tri-color screen. Then, it died on me. No battery, obviously, being stuck at the tri-color screen the whole night. Now, it doesn't charge or turn on. I know I just need a battery to run the phone. But where I'm from, batteries for the Cingular 8125 are rare, and I'm one of the few that has an 8125.
I don't know anyone who has a battery for the 8125, and there's nowhere to buy from here. Any recommendations?
First of all be sure that you haven't flashed a G4 ROM in a G3 device (or vice-versa) which would have made it a brick.
In case you haven't screwed up the bootloaders then look for the battery jump start thread that teaches how to revive a dead battery
good luck
ianestradalives said:
I was flashing my phone repeatedly last night. I've read the forums and have done about 4 successful flashes already. The problem is, I've found a WM6 rom for the Wizard that I wanted better than the ROM already inside my phone, and I proceeded to flash it. But I left the computer and phone by itself so that I could rest a bit (I've spent hours in front of the computer flashing my phone), and fell asleep. When I woke up, I noticed that the flashing failed, and it was at the tri-color screen. Then, it died on me. No battery, obviously, being stuck at the tri-color screen the whole night. Now, it doesn't charge or turn on. I know I just need a battery to run the phone. But where I'm from, batteries for the Cingular 8125 are rare, and I'm one of the few that has an 8125.
I don't know anyone who has a battery for the 8125, and there's nowhere to buy from here. Any recommendations?
Click to expand...
Click to collapse
First os all your Wizard is not a brick. To revive your battery try using a wall charger to charge you battery, or you can leave it attahed to a wall charger for some time and it should start charging after 10-15 mins (becoz one i got a dead battery and did the same) Once the battery is revived then flash it to a Official ROM, afterwards any custom ROMs or what so ever. I hope i helped. TC
i've the same problem!!! i leave the phone attached the whole night to the charger...but it was in bootmode, so it doesn't charge!!! it hasn't the power to flash my phone...when it arrives to the 85% (when the phone write into the flash memory) it reboots.....what must i do? i tried to jump start...with a 12v adapter...but nothing....
It won't charge in Bootloaders,as it doesn't provide any charging circuit .The phone must have and boot up to a working OS (Windows) to start charging,only then it has a charging circuit.
Try to get a fully charged batter ,may be borrow it from a friend or try to charge your battery with friends phone,flash a rom and only it'll start to charge.
i know....but...i have not a friend with a ppc like mine!!!! and even if i'll buy a new battery....how can i charge it????? a friend of mine has a qtek 9000....but the battery is different from mine.......
F0ll3 said:
i know....but...i have not a friend with a ppc like mine!!!! and even if i'll buy a new battery....how can i charge it????? a friend of mine has a qtek 9000....but the battery is different from mine.......
Click to expand...
Click to collapse
No need to buy a battery i say you use a External Battery Charger. Because even buying it would be cheaper then the battery itself and would help you in future too. I hope i helped. TC
Thanks
xda2_haseeb said:
First os all your Wizard is not a brick. To revive your battery try using a wall charger to charge you battery, or you can leave it attahed to a wall charger for some time and it should start charging after 10-15 mins (becoz one i got a dead battery and did the same) Once the battery is revived then flash it to a Official ROM, afterwards any custom ROMs or what so ever. I hope i helped. TC
Click to expand...
Click to collapse
Thanks, dude. I never even tried charging it with the wall charger. There seems to be other people that have the same problem as I do. Now my phone is up at the tri-color screen, and I'm charging it, then Ill start flashing again. Thanks again!
No Problem but now remember if you find ppl with same problem (on the forum) dont forget to guide them to this Thread. And no need for the thanks. TC
zabardast_1 said:
It won't charge in Bootloaders,as it doesn't provide any charging circuit .The phone must have and boot up to a working OS (Windows) to start charging,only then it has a charging circuit.
Try to get a fully charged batter ,may be borrow it from a friend or try to charge your battery with friends phone,flash a rom and only it'll start to charge.
Click to expand...
Click to collapse
Thanks, dude. I never even tried charging it with the wall charger. There seems to be other people that have the same problem as I do. Now my phone is up at the tri-color screen, and I'm charging it, then Ill start flashing again. Thanks again!
Click to expand...
Click to collapse
@ianestradalives's as zabardast_1's has said, your phone WILL NOT CHARGE unless windows Boots. Either buy a new battery or find someone with the same phone or an Orbit(as they use the same battery) also if you buy a new battery it generally arrives with enough charge to use for flashing(It did for me anyway). The only other way to do it would be to buy a dock with a second battery charging slot. Using the wall charger wont do anything except stop it from restarting ,while its plugged in.
@XDA2_haseeb why point people who have the same problem to this thread, if the answer you have given is incorrect?
scousemartin said:
@ianestradalives's as zabardast_1's has said, your phone WILL NOT CHARGE unless windows Boots. Either buy a new battery or find someone with the same phone or an Orbit(as they use the same battery) also if you buy a new battery it generally arrives with enough charge to use for flashing(It did for me anyway). The only other way to do it would be to buy a dock with a second battery charging slot. Using the wall charger wont do anything except stop it from restarting ,while its plugged in.
@XDA2_haseeb why point people who have the same problem to this thread, if the answer you have given is incorrect?
Click to expand...
Click to collapse
Dude, sorry to disappoint you, but his advice was correct. My phone is now up and running, and it has NBD 9.2. The advice he has given is correct. It works.
Ok,was your phone in Bootloaders (muliticolor screen) or with a working OS installed on it when you charged with a wall charger ?
That's exactly what was i was about to ask Zabardast_1
As there is no way he could charge his phone while it is in bootloader mode. He either had battery power already in it and messed up the flash or you have just been lucky when you took the battery out of the unit and reinserted it and there was enough power left to flash
zabardast_1 said:
Ok,was your phone in Bootloaders (muliticolor screen) or with a working OS installed on it when you charged with a wall charger ?
Click to expand...
Click to collapse
In bootloader screen. If you were flashing a rom and it failed, you usually end up in the tri-color (aka "Bootloader") screen. Do what haseeb said (like I did) and plug your wizard to a wall charger and wait for a few minutes. When I plugged mine, it immediately lit up. Good hunting!
scousemartin said:
That's exactly what was i was about to ask Zabardast_1
As there is no way he could charge his phone while it is in bootloader mode. He either had battery power already in it and messed up the flash or you have just been lucky when you took the battery out of the unit and reinserted it and there was enough power left to flash
Click to expand...
Click to collapse
Nope. I'm sure the battery was drained. The other night, my phone was in the bootloader screen THE WHOLE NIGHT. And yesterday, I tried reflashing, but it won't start anymore because of - obviously - no battery power.
IF you don't believe me, fail a flash and drain the battery. Then plug it into the wall. It really works.
scousemartin
YUP! thats very true.
The question here is 'How did he charge in Bootloaders with a wall charger',it has to have a working OS on it to start the charging circuit,which isn't present while in Bootloaders.
Flashing is a separate issue.
it will light up as it has power but it WONT CHARGE IT. You were LUCKY that's all and you had power in your battery. You just never realised it. If you want to prove us wrong let the battery go low and then try your revival attempt again. I guarantee you will be buying another battery or charging it somewhere else
also i have been through this personally with my xda mini-s and the only remedy was to buy another battery (or recharge it). You could leave your phone connected to the wall charger for a week and it wont make a blind bit of difference to the battery level. I know because i tried.
Anyway glad you got it sorted ,but the solution to your problem was not charging the phone. Thats all i have to say on this matter now
scousemartin said:
also i have been through this personally with my xda mini-s and the only remedy was to buy another battery (or recharge it). You could leave your phone connected to the wall charger for a week and it wont make a blind bit of difference to the battery level. I know because i tried.
Anyway glad you got it sorted ,but the solution to your problem was not charging the phone. Thats all i have to say on this matter now
Click to expand...
Click to collapse
It did get sorted. But I am really sure about the battery thing. I guess this is an anomaly. Besides, the XDA is different from a Wizard.
lol the xda mini-s is exactly the same device a 8125 is, they re both wizards

almost dead blueangel

NEVER MIND. I BOUGHT A NEW ONE. (at least i'll have spares)
i we had my blueangel for about a year now and i while back it started shutting down randomly and didn't boot. so i got pissed and started using another phone instead. but now i want to fix it. so the problem is:
randomly flashing blue light and no bootup. somtimes the redlight flashes too.
sometimes the screen shows ROM but crashes. (no backlight)
and with my other battery i just get a glowing red light or simply nothing.
i overclocked it in the past, any chance the the OC killed it? highest was 570 something but only for a short period.
when it started crashing i figured the rom was corrupted or somthing and i wanted to upgrade it to wm5 or 6. but it died like 10 seconds before i plugged it in and it's havent worked since.
i've noticed something though. i charge it with my qtek 1010's charger 5v 1A however on the blueangel its 5v 2A. but i worked fine for about 6 months.
any thoughts? is it gone for good?
EDIT: i almost forgot. bootloder mode doesnt work either. when it finally starts all i see is the t-mobile logo an rom version.
EDIT2: a quick ansver would be great becouse there is an mint condition blueangel for sale and i'll probably buy it if i cant save my current one. however i would save a lot of money if i fixed this one.
You've probably flashed wrong or bad rom, so the device is doing god-knows-what when you turn it on Maybe there's a way to flash some working rom to it?
in never made it to the flashing. i plugged it in and it was dead. so i never had time to flash it, i died before i tried.
did you have the red light when you put your BA in charge ?
Because in my case, when i don't use my BA and my battery is empty, i need to charge at least 30mn my BA and after i remove the battery and soft reset the phone for restart my BA. This is the only way for restart my BA.
The charger 5v 1A is not a problem but if your BA crash during the upgrade of wm5 or 6 is not good.
in first try to start your phone and go in bootloader.
you should only flash your device, when the battery is full, because
1. the device is not being charged while upgrading, and so it could switch off during upgrade if the battery is not full.
2. there are rumours, that the battery state during the upgrade is recognized as 100% after upgrading and if that is not true, your battery state is all messed up and you could harm your battery while charging afterwards.

Battery not recognized and will not charge

I have searched the Internet and forums for days and can't find a solution to my problem. I have found a few with the same problem, but no solutions. Please help!
I have a Sprint HTC Touch Diamond 6950SP (DIAM500) running the original ROM. A few months ago and for no apparent reason, it stopped recognizing the battery and stopped accepting a charge. I haven't messed with the phone in any way or attempted to load a new ROM. The Power Status screen simply shows, "Main battery: Unknown". Plugging the phone in with the supplied charger will actually discharge the battery and the circular LED does not come on. I tried several soft and hard resets; then I downloaded and flashed the ROM with the one from the Sprint web site (WM 6.1 Professional 5.2.20764/Build 20764.1.4.3), but nothing seemed to help. I found that I could get the battery to charge by removing the battery (with the phone plugged into the charger) and then putting it back in. When the circular LED flashes twice, I remove the battery and wait till it flashes two more times, and then put the battery back in. This takes many attempts, and eventually the LED continues to flash and will charge the battery. I did this for a long time while I searched for a solution, and one day, it just started working again!!! The phone worked great for several months and suddenly, it has started doing the same thing again.
I decided to upgrade to WM 6.5 and downloaded all the necessary applications, (many thanks to XDA and friends). But, when I attempted to flash my ROM, it stopped and indicated that my battery was too weak - even though I new it had a full charge, (see battery status, above). I've checked the battery with a multimeter, therefore, I know it has a full charge. I don't have any other problems with the phone, nor do I have any problems with it sincing to my computer. I have since ordered a new battery, but it hasn't arrived yet. Someone please help.
Thanks.
I have read at other posts that the Diamond's battery has a recognition chip in it. Also, without the battery, it will not run from the charger. Could the chip in the battery be bad? Has anyone else had this problem?
Is there a registry fix (or tweak) for the battery status? Please, one of you must know something about this.
Got my new battery - the phone does not power up, charge or anything else with the new battery. I tried charging the new battery with the method I've tried before, (see above), but it won't even light the circular LED. I checked the new battery with a multimeter, and it shows it has 3.7 volts. Now what? Any ideas would be appreciated.
that happened to me for a little while. idont know what it was but it wouldnt charge using the usb cable to any computer or even the a/c adapter but it would charge with another wall charger i had. after a couple days a friend had his psp over and i charged my phone with his cable on my computer like nothing and after wards it all worked again
Thank you so much for your reply!!!
[/B]
lokoz89 said:
that happened to me for a little while. idont know what it was but it wouldnt charge using the usb cable to any computer or even the a/c adapter but it would charge with another wall charger i had. after a couple days a friend had his psp over and i charged my phone with his cable on my computer like nothing and after wards it all worked again
Click to expand...
Click to collapse
I have tried other cables and chargers, but none have helped. Last time my phone started working properly, I had plugged it in to my computer, but that hasn't happened this time. Thanx for your comments - keep 'em coming.
I purchased a new charger/docking station for my phone and spare battery. It wouldn't charge my phone or the new battery I purchased either. The new battery still will not work in my phone - paper weight! The charger does charge my old battery, though. Does anyone know if you can run a Touch Diamond from the USB/charging cable without the battery installed? Mine won't, but I was wondering if it should.
Hey man
you know that happend to me when i first flashed my diamond for metro i bought a new battery and nuthing changed so what i did was a hard reset and it fixed it for me but i dont know thats just me and if u want to try it make sure u back up ur contacts with PIM backup hope u fixe it
krzynate said:
you know that happend to me when i first flashed my diamond for metro i bought a new battery and nuthing changed so what i did was a hard reset and it fixed it for me but i dont know thats just me and if u want to try it make sure u back up ur contacts with PIM backup hope u fixe it
Click to expand...
Click to collapse
Thanks, Krzynate! I tried that already, many times now, (see my first post in this thread). Thanks anyway and please keep the posts coming.
I had the same problem.. I ended up buying a new battery and it wouldn't charge in my phone. So I ordered an external charger from EBAY for 10$. My new battery is charging so It might be the solution you are looking for.
Thank you so much for posting! As I wrote previously,
(I purchased a new charger/docking station for my phone and spare battery. It wouldn't charge my phone or the new battery I purchased either. The new battery still will not work in my phone - paper weight! The charger does charge my old battery, though.), this did not fix my problem. The vender that sold me the new (bad) battery is sending me another one - hopefully, it will work this time.
It's Fixed!!!
I wrote the Internet store where I purchased the non-working battery. They sent me another battery and now it's fixed!!! The battery indicator and status all recognize the new battery! Apparently, there is a recognition chip in the battery; the original battery's chip's software became corrupted, and the other "new" battery's chip was blank. The original battery still works, (as long as I charge it with the external charger), and still has an unrecognized status in WM 6.1. Please pass this info on to others that have simular problems. Thanx XDA!

Extended battery not charging

Hey guys,
I have just brought a new extended battery and cover for my HTC HD2, i got it deliveried this morning, turned the phone off and changed the batterys. i then put it on charge while the phone being turned off, to give it a full charge. The light for charging starts, but then after 30 secs it flashes one orange light then a green one, which suggest its not charging. I have tried charging it via the computer and still get the same problem
Can anyone help me as to what the problem actually is?? as if it is the battery i will order a new one.
Kind Regards
Shane
Ive just put my old battery back in, (standard one) and it seems to be charging fine. does this mean the battery i have is faulty, I have herd sometimes when they havnt been used they dont charge but after using and charging it works.
I need to sort this out as soon as because of trying to return the for another one??
i have the same problem with my spare battery i bought it only charged once and after that it only flashes orange and green. the only solution i found is charging it with my craddle in the spare battery slot (which doesnt work anymore for some reason it doesnt charge either battery so its probably the craddle thats bad so make sure you buy a good one and thats compatible to your hd2 version)or having your phone off while charging. which sucks if you use your phone as an alarm because you have to up in the middle of the night just to switch batterys and miss any late night calls if you know what i mean
Subsx said:
Ive just put my old battery back in, (standard one) and it seems to be charging fine. does this mean the battery i have is faulty, I have herd sometimes when they havnt been used they dont charge but after using and charging it works.
I need to sort this out as soon as because of trying to return the for another one??
Click to expand...
Click to collapse
Have exactly the same problem. Old battery charges fine, new extended doesn't.
Did you find any solutions? Is it a fault on the extended battery?
Hi guys
I am having the same problem, new extended battery and does not charge just getting the flashing led's, normal battery charges ok!! charge from mains or computer is gives the same result....any ideas???
I had this problem, i was running the stock rom (02 ireland) flashing red and green not charging with the extended battery (official), i fixed it by flashing a new rom.
that tells me its a software issue as the original battery would charge fine and the extended had the issue.
Hi guys
I am having the same problem, new extended battery and does not charge just getting the flashing led's, normal battery charges ok!! charge from mains or computer is gives the same result....any ideas???
yes its a software issue and if your provider wont let you use the rom update on the htc site then i think until they bring a new rom out for eg.vodafone we are stuffed....
Older ROMs don't support the extended battery.
Check post #8 here

Categories

Resources