Hello,
I try to send files via bluetooth to a C500 or other phones but each time i have an Error message from Obex : "Cannot connect to the Obex device. It is either not accessible or does not support selected device". I have disabled Obex in Resco explorer and i have put the value to 0 in the registry (HKLM\Software\Microsoft\Obex\IsEnabled) but it did not change anything.
Does anybody know how i can doto be able to send and recieve files from everybody ?
Thank you, and have a good day.
MA
Please, tell me if i am alone to have this kind of probleme, are you able to send files with all other phones ?
I can see that nobody use his bluetooth.
Thank you
I have no problem at all.
1. Add new device, in bluetooth settings.
2. Click FTP tab and make sure "enable file sharing" is checked
3. Beam the file you want. After you are paired.
Thants what I do and have always done, and it works fine for me.
EDIT* Make sure the other device has filesharing permissions set. I.E. allow file transfers. Not enabling this on the recieving device will throw that error.
Hey, just seeing if it worked for ya. Let me know
you're supposed to put 1 for IsEnabled
XtreMe_G said:
you're supposed to put 1 for IsEnabled
Click to expand...
Click to collapse
Thanks, i overlooked that when reading his post.
Resolved
Thank you everyone, it is working.
the probleme was that I didn't pair it with the other devive.
I'm a poor stupid french... sometimes.
thank's a lot again.
Related
I don't know if i'm missing something here, but the bluetooth manager folder in file explorer seems useless.It never finds any of my devices and i have no idea why. It says searching but can't find anything. It can't find my 8525 when it' on and visible. Does the 8525 have to have this for it to work? If not, how can i get it working? Thanks
kareem9nba said:
I don't know if i'm missing something here, but the bluetooth manager folder in file explorer seems useless.It never finds any of my devices and i have no idea why. It says searching but can't find anything. It can't find my 8525 when it' on and visible. Does the 8525 have to have this for it to work? If not, how can i get it working? Thanks
Click to expand...
Click to collapse
I had problems with this too, couldn't find the receiver device when trying to send a file.
This worked for me:
You have to do kinda "shake hands" of the devices the first time.
Goto Start menu -> settings -> connections -> bluetooth -> devices -> add new device
(could be named a little bit different, I translated from my german device)
You will be asked for a password. I normally use 0000 (standard BT password), even if it's not the savest way I think
The other device will recognize this and also askes for the password.
Once the device is mentioned in the devices list, sending and receiving to/from it will be possible.
I hope this was what you asked for.
Greetz,
Hans Olo
My problem
I have done the whole pairing thing but when i do the discover services it say no services found and it's not connected please advise
u need to go in the BT configuration and under FTP tab check the Enable File Sharing.
For some reason or maybe for me only, this settings does not stick, and I have to do it anytime I want to exchange files. But once I tick the box, I am able to transfer files, contacts and such.
On the same FTP page you can choose to activate the BT explorer. This will browse other BT enabled phones ?! I guess. More like BT jacking?!
is there a cab for the BT Explorer as it is not cooked into the rom I have ??
Does the tilt support OBEX file transfer and push service for bluetooth? I know about the reg setting (..Microsoft/Obex/IsEnabled to 1) but it doesnt seem to be working. I also found a cab in one of the other forums (i cant find a link right now to show) and it seemed to help a little but i still get a lot of errors when i try to connect using Bluezard, saying things like There was an error in the OBEX service and that it cant find the OBEX Push service.
Is there a fix or is it just something i did to screw myself over?
Alright, screw it, ill just not mess with bluetooth as its obvious no one has ever had this problem...
Yes,
The Tilt does support OBEX on an official ROM, used it quite extensively. However, can't seem to find a OBEX package to cook a ROM cuz there's lots of variables to it.
Im using the standard tilt rom but i still have not been able to get bluetooth to really work. I found i thread with my same problem, but no real answer.
I can receive bluetooth files fine, but i cant send them. If i select beam it will just pop up, ill click the name, "Pending..." > "Sending 1/1" > "Failed".
before its suggested. I have Receive all incoming beams selected.
I have enable file share (Bluetooth FTP tab) selected.
I have my devise visable and discoverable.
i have changed the registry of Obex "IsEnabled" to "1"
also i think i MAY have found the possible culprit. in one of the bluetooth fix cabs i have downloaded. it modifies part of the registry to this:
Under HKLM\SOFTWARE\Microsoft\Obex\Services\{00000000-0000-0000-0000-000000000000}
It changes "Server" to the value "obexinbx.dll", but that file is not in my windows folder. is there a place i could get that DLL? (this is not the same as obexfile.dll right? because i have that...).
you can just use the advanced configuration cab and you can enable OBEX
ChInEsE ChIcKeN said:
you can just use the advanced configuration cab and you can enable OBEX
Click to expand...
Click to collapse
I think i have already enabled it through registry but if its something else, could you post a link to it?
pizzaguy said:
I think i have already enabled it through registry but if its something else, could you post a link to it?
Click to expand...
Click to collapse
its the sticky in the development and hacking section
My phone doesnt know how to open JPEGs. Even though i in Advanced Config told it to open with pimg.exe, i assume thats the picture and videos tool? What can i do to get the normal file asso's back, is there a "default" button somewhere?
Go to
Hkey_Classes_Root\.jpeg
Default =jpegimage
Content Type=Image/jpeg
Perceivedtype=image
Hkey_Classes_Root\.jpg
Default =jpegimage
Content Type=Image/jpeg
Perceivedtype=image
Hope this help
Thanks alot, im gonna look into that later! Thank you
Hi hope you could help me too
when i click the mp3 files from the file explorer they are not playing and it asks something related to the certificates. The error also advises to install the file again.
It is however functioning well when opened in the Win Medial Player. I all started when i uninstalled the Coreplayer and deleted the installer files.
Please help me.
Thanks.
I had a similar problem with .mp3 association, fixed it partly with "Total Commander".
However, I still cannot use .mp3 files as ringtones.....
I have found this solution
Use a registry editor, then locate:
1) HKEY_CLASSES_ROOT\.mp3 - Default = WMAFile
2) HKEY_CLASSES_ROOT\WMAFile\DefaultIcon - Default = wmplayer.exe,-2001
3) HKEY_CLASSES_ROOT\WMAFile\Shell\Open\command - Default = wmplayer.exe "%1"
last two entries might already be present in ur registry in that case u just need to change the first one.
============================\
I found this solution on research from the net however i have not tested it yet i left my diamond at home. I am not sure also where do i run the regedit. Is it through the pocket pc itself or in a computer (using regedit) when the diamond is connected?
Pls. let me know if this does the fix for you just in case.
Man, you're AMAZING!!!
IT WORKED !!!
I only needed to change No 1 !!
WOW
No2 in my diamond was "-2002", no need to change that. Just changed number 1 and voila...
MP3 RINGTONES AGAIN !!
Could someone add "SOLVED" on the title?
Registry Editing Question
Hi Garret, it's great news that you have solved your problem. I have one question though... where do i edit the registry file and how to do it? I hav tried connecting it to my computer and running regedit, however i was not able to see the HKEY_CLASSES_ROOT\.mp3 of my device.
Sorry for the newbie question.
Thank you.
Hey all,
I have a weird problem that I discoevered today is that I can send but cannot recieve anything via Bluetooth...I paired with another device and allowed for incoming beams...do not know what the problem?..Any possible solution?
Thanks much.
I haven't test receiving files via bluetooth, but I noticed in Advanced Configuration Tool, OBEX is disabled for Diamond and Touch Pro. My previous device, O2 Atom Life, if OBEX is disabled, it can't receive file via bluetooth.
Hope the info helps.
start - settings, connections tab - beam -recieve all incoming beams
matt
programatix said:
I haven't test receiving files via bluetooth, but I noticed in Advanced Configuration Tool, OBEX is disabled for Diamond and Touch Pro. My previous device, O2 Atom Life, if OBEX is disabled, it can't receive file via bluetooth.
Hope the info helps.
Click to expand...
Click to collapse
I have advanced config tool mate yes, and OBEX is disabled..
I will try to enable it and check if it will work.
Thanks mate.
maat_o121 said:
start - settings, connections tab - beam -recieve all incoming beams
matt
Click to expand...
Click to collapse
I already have it on maat...Thanks bro.
Shouma said:
I have advanced config tool mate yes, and OBEX is disabled..
I will try to enable it and check if it will work.
Thanks mate.
Click to expand...
Click to collapse
I did enable OBEX mate but still "Sending Failed" on the other side...Any other solution bro??
Any other solutions mates?..
Tried sending with another device?
Riel said:
Tried sending with another device?
Click to expand...
Click to collapse
Yea..No device can send my anything...all of them give "Sending Failed."
I have the exact same problem - no solution yet though
my friend also has this problem, do you have the O2 XDA Diamond by any chance?
I think its somehow related to the apps installed like Diamond Tweak or Advanced Config.. but I can not find any solution till now..
Hope if someone has experienced the same and solved the problem to reply in this thread.
Weird, even when my OBEX setting is disabled (shown in Advanced Configuration Tool), but the OBEX service is running (I use SKTools). The point is, to receive files via bluetooth, OBEX service must be started.
For my Touch Pro, I am able to receive files from bluetooth.
programatix said:
Weird, even when my OBEX setting is disabled (shown in Advanced Configuration Tool), but the OBEX service is running (I use SKTools). The point is, to receive files via bluetooth, OBEX service must be started.
For my Touch Pro, I am able to receive files from bluetooth.
Click to expand...
Click to collapse
I have OBEX enabled mate in Advanced Configuration tool and still cant recieve any files via bluetooth :S..
When OBEX enabled this means the service has started? or I have to manually start it by another means?..
Thanks mate for contributing and trying to help.
Shouma said:
I have OBEX enabled mate in Advanced Configuration tool and still cant recieve any files via bluetooth :S..
When OBEX enabled this means the service has started? or I have to manually start it by another means?..
Thanks mate for contributing and trying to help.
Click to expand...
Click to collapse
OBEX enabled in Advanced Configuration Tool does not mean the service is started. It works just like Windows service for automatic, where the service should be started after a soft reset. Anyway, I think the OBEX setting in Advanced Configuration Tool has no effect on the setting (just like TouchFlo, if you disable it, it is still enabled).
The best is to check the service itself. You can use free Task Manager (find it in this forum) or SKTool.
programatix said:
OBEX enabled in Advanced Configuration Tool does not mean the service is started. It works just like Windows service for automatic, where the service should be started after a soft reset. Anyway, I think the OBEX setting in Advanced Configuration Tool has no effect on the setting (just like TouchFlo, if you disable it, it is still enabled).
The best is to check the service itself. You can use free Task Manager (find it in this forum) or SKTool.
Click to expand...
Click to collapse
The service will be called OBEX in the task manager m8?
Thanks and I will try and will tell you what happened.
I am just @ work now and when I am back I will check.
Cheers bro.
Just to make it easier for you. The link to Task Manager is http://www.dotfred.net/TaskMgr.htm
programatix said:
Just to make it easier for you. The link to Task Manager is http://www.dotfred.net/TaskMgr.htm
Click to expand...
Click to collapse
Thanks a lot mate..much appreciated.
I downloaded the task manager and checked the services.
Actually OBEX is there but is not started. I try to start it, it give me the following error " Service Start Error: The device is in use by an active process and cannot be disconnected." I dont know why I cant start it..I dont use the bluetooth at the moment..I just checked bluetooth and beam to be on. Any ideas mate?
Cant thank u enough for ur help.
I also checked dll name of OBEX service and went to processes tab and selected services.exe and showed details of services.exe
I found OBEXsrvr.dll the dll of OBEX inside services...so maybe there is something wrong in the dll file that might be replaced by new one?? what do u think?
Because I think everything is there and enabled but I cant just start the service.
Mate thats a screenshot of my OBEX registry settings.
OBEX Registry Screenshot
What do u think? I dont know what Flags and Unsigned services are doing there? But i think they are part of Advanced Config or Diamond Tweak..am I right?
I cant gett bluetooth explorer to work.
Whenever i tick the check box to enable bluetooth explorer in settings, once i click ok it does not save it and the box is unticked when i open up bluetooth settings again.
Anyone else have this problem?
Any ideas?
Same issue...
I had no issues when I was using WinXP and a Tilt, I could just pair the laptop and Tilt and transfer files back and forth.
I am now on a new Dell laptop w/ Vista (and Dell Wireless 360 Bluetooth module) and after pairing w/ my Fuze, I cannot transfer files in either direction.
Any thoughts????
is this different then just using bluetooth windows mobile device center? i can transfer files back and forth doing that
BT explorer
mtm1974 said:
I had no issues when I was using WinXP and a Tilt, I could just pair the laptop and Tilt and transfer files back and forth.
I am now on a new Dell laptop w/ Vista (and Dell Wireless 360 Bluetooth module) and after pairing w/ my Fuze, I cannot transfer files in either direction.
Any thoughts????
Click to expand...
Click to collapse
Hi, I have your exact same setup and just got BT exporer working.
Things to check are:
1. go to settings under "communications manager " and select Bluetooth
2. add your laptop as new device
3. under mode, make sure "make this device visible.." is checked
4, under FTP, make sure "enable BT explorer" and "enable file sharing" are checked.
On your laptop I used the "Bluetooth Information Exchanger\File Transfer\Shared Folder" to transfer files and I got it to work.
It isn't easy to setup but it does work.
Cheers,
Connor
Thanks connorxda
It seems to work now after trying the method you posted
Thanks
faza11 said:
I cant gett bluetooth explorer to work.
Whenever i tick the check box to enable bluetooth explorer in settings, once i click ok it does not save it and the box is unticked when i open up bluetooth settings again.
Anyone else have this problem?
Any ideas?
Click to expand...
Click to collapse
I'm having the same problem but this solution will not work for me. Every time I check "Enable Bluetooth Explorer" and exit it unchecks and will not launch explorer.
Anybody else having this problem?
Problem with FTP Bluetooth in WM6.1
connorxda said:
Hi, I have your exact same setup and just got BT exporer working.
Things to check are:
1. go to settings under "communications manager " and select Bluetooth
2. add your laptop as new device
3. under mode, make sure "make this device visible.." is checked
4, under FTP, make sure "enable BT explorer" and "enable file sharing" are checked.
On your laptop I used the "Bluetooth Information Exchanger\File Transfer\Shared Folder" to transfer files and I got it to work.
It isn't easy to setup but it does work.
Cheers,
Connor
Click to expand...
Click to collapse
i cant enable """enable BT explorer""" >> it sems this plugin cant create Bluetooth share folder in """"WM6.1"""". so i cant enable """enable BT explorer"""
i tried many ver of this plugin but (
onesikpuppy said:
I'm having the same problem but this solution will not work for me. Every time I check "Enable Bluetooth Explorer" and exit it unchecks and will not launch explorer.
Anybody else having this problem?
Click to expand...
Click to collapse
I am having the same issue, Did you ever find a fix for it?
genoiiiiii said:
I am having the same issue, Did you ever find a fix for it?
Click to expand...
Click to collapse
****FIXED*****
Now the Problem just happen to hit me when my bluetooth explorer wasn't working on my Touch pro. From the stock rom it worked fine, then I applied some tweaks, and it stopped.. So I starting searching.. I have came up with no Fixes, so I was retracing my steps..
What had happened was I had set my File System Cache to 131072 from the registry. I never noticed it, till I fired up Advanced Config, and Noticed that when I clicked on the list of sizes, 8M was the higest, I thought that was strange, so I set it to 8M in advanced config, Soft Reset, and now my Bluetooth Explorer is working just fine..
So, recap..
Make sure your FILE SYSTEM CACHE is set to 8M Or just not some Huge Number, My FILE SYSTEM FILTER CACHE IS SET TO 131072
Notice where I got the mixup I set the wrong values.. Hope this can help some people out..
For those who don't know what the Bluetooth Explorer is, Its quite simple, You need to enable FTP Sharing on your Device such as your computer.. Then open the FTP Explorer on your phone, it will list the bluetooth devices it finds, once it does click the device, and walla all the files that are on the device(computer) folder you setup now show on your phone..
If anyone has any questions about this or needs help fixing it, just PM me.
genoiiiiii said:
****FIXED*****
Now the Problem just happen to hit me when my bluetooth explorer wasn't working on my Touch pro. From the stock rom it worked fine, then I applied some tweaks, and it stopped.. So I starting searching.. I have came up with no Fixes, so I was retracing my steps..
What had happened was I had set my File System Cache to 131072 from the registry. I never noticed it, till I fired up Advanced Config, and Noticed that when I clicked on the list of sizes, 8M was the higest, I thought that was strange, so I set it to 8M in advanced config, Soft Reset, and now my Bluetooth Explorer is working just fine..
So, recap..
Make sure your FILE SYSTEM CACHE is set to 8M Or just not some Huge Number, My FILE SYSTEM FILTER CACHE IS SET TO 131072
Notice where I got the mixup I set the wrong values.. Hope this can help some people out..
For those who don't know what the Bluetooth Explorer is, Its quite simple, You need to enable FTP Sharing on your Device such as your computer.. Then open the FTP Explorer on your phone, it will list the bluetooth devices it finds, once it does click the device, and walla all the files that are on the device(computer) folder you setup now show on your phone..
If anyone has any questions about this or needs help fixing it, just PM me.
Click to expand...
Click to collapse
can u move the files thats on another device and move them to your device?
deadwrong03 said:
can u move the files thats on another device and move them to your device?
Click to expand...
Click to collapse
Lets say you got your Phone and Computer
You can Move files from a Folder on your Computer to your Phone from Bluetooth Explorer (You setup your Bluetooth folder on your computer)
and Vice Versa for your Phone
You can Move files from your Phone from your Computer
You just have to go to Settings / Bluetooth / FTP then tick the box that says Share Folder and set the Folder you want the other device to be able to pull files from..
Very Nice Program to use.. Good Job HTC
genoiiiiii said:
Lets say you got your Phone and Computer
You can Move files from a Folder on your Computer to your Phone from Bluetooth Explorer (You setup your Bluetooth folder on your computer)
and Vice Versa for your Phone
You can Move files from your Phone from your Computer
You just have to go to Settings / Bluetooth / FTP then tick the box that says Share Folder and set the Folder you want the other device to be able to pull files from..
Very Nice Program to use.. Good Job HTC
Click to expand...
Click to collapse
does this also work with moving files from phone to phone? or is it only a pc to phone thing?
deadwrong03 said:
does this also work with moving files from phone to phone? or is it only a pc to phone thing?
Click to expand...
Click to collapse
Phone to Phone also, as long as the Phone supports the FTP Profile.. Any Bluetooth device that supports the FTP profile will work..
genoiiiiii said:
****FIXED*****
Now the Problem just happen to hit me when my bluetooth explorer wasn't working on my Touch pro. From the stock rom it worked fine, then I applied some tweaks, and it stopped.. So I starting searching.. I have came up with no Fixes, so I was retracing my steps..
What had happened was I had set my File System Cache to 131072 from the registry. I never noticed it, till I fired up Advanced Config, and Noticed that when I clicked on the list of sizes, 8M was the higest, I thought that was strange, so I set it to 8M in advanced config, Soft Reset, and now my Bluetooth Explorer is working just fine..
So, recap..
Make sure your FILE SYSTEM CACHE is set to 8M Or just not some Huge Number, My FILE SYSTEM FILTER CACHE IS SET TO 131072
Notice where I got the mixup I set the wrong values.. Hope this can help some people out..
For those who don't know what the Bluetooth Explorer is, Its quite simple, You need to enable FTP Sharing on your Device such as your computer.. Then open the FTP Explorer on your phone, it will list the bluetooth devices it finds, once it does click the device, and walla all the files that are on the device(computer) folder you setup now show on your phone..
If anyone has any questions about this or needs help fixing it, just PM me.
Click to expand...
Click to collapse
Holy christ you are a genius buddy!! lol, this been buggin me FOREVER!! lol, apparently when you install "Advanced Config" it automatically has it set as some High number, so when you hit "ok" to exit out of it the first time, your cache gets set to that high number >.>
Anyways, Thanks Again!!!