Database Develop

Help Please

restarted my phone at work today and all it does now is go straight to the tri colour boot loader screen. Iv take sím out, SD card out, battry out, nothing works.
Put the USB cable in and it starts on its own straight to the tri colour screen without pushing start button
Any ideas..
Thanks Ahead

Maybe it´s as easy as that the camera-button is stuck? That happened to me with the power button. Now the power button is a bit "loose" in feel but is not active all the time.

yeap
I thought of that, iv pushed the camera button quiet a few times trying to see if its stuck but it didnt help at all, still doing it. If i connect the USB cable with no battery in it starts up on its own as well and goes straight to the boot loader screen.
Its says
WING220 MFG
SPL-0.91.hard
CPLD-7
USB

update
A quick update, if i actually put the USB headphones in the phone and try to start it it works. A restart with them in works to. Take them out and its straight to bootloader again. LOL Also Windows does not recognise the phone when its conected via USB cable when its running. This seems to be a USB problem of some kind. Iv done a hard reset as well, no luck.

Try this: enter bootloader and type "boot". If it again enters bootloader after restarting do the same thing again. Hopefully that fixes it.

hehe
No change. Only way to start the phone is with the headphones connected. When the phone is running and i conect it to the pc i get this " One of the USB devises attached to this computer has malfunctioned, and windows does not recognize it "

NoNco said:
No change. Only way to start the phone is with the headphones connected
Click to expand...
Click to collapse
Try "task 8" in bootloader and then "ResetDevice"
(ps do *not* experiment with other parameters!)

nope
When i used "boot" it made a buzz and went to a white screen, had to remove battry to restart, it didnt help, tried 3 times.
" task 8 " it goes dark for a split second and back to the bootlaoder screen. remove bat. restart back to bootlaoder screen
oh after i type task 8 i get an error that pops up in mtty
wceusbsh004 port read error occured

try Hard resting it but juss to let u kno IF U DO THIS U WILL LOSE a last memory u did even phonebook and all resets like new i had to do it cuz i had a prob i could not text n stuff now it works fine after HARD RESETING

doesnt work
Iv already done the hard reset from within WM when i get the phone to work, it didnt help.

Try the hard reset after re-inserting battery immediately at power on.
(keep left- and right softkey pressed and power on I think is the key combination)

mmm
trying to do it but i must be doing the key combination wrong. Just keeps going to tri colour.
I presume you meen the soft keys on the sides of the s730. Camera key and the Comm Key.

NoNco said:
trying to do it but i must be doing the key combination wrong. Just keeps going to tri colour.
I presume you meen the soft keys on the sides of the s730. Camera key and the Comm Key.
Click to expand...
Click to collapse
No, the softkeys are the two buttons next to the joystick, see here ->IMAGE<-
But I would think your mini-USB connector is kind of broken I'm not sure of course

nope
Iv tried the keys on the side, iv tried the keys on the keypad. i just dont get it to work...

mm
@ Jocky...
I eventually managed to do a hard reset, the problem was it just kept going to the bootscreen so i tried it with the headphones pluged in and then it worked, lol, but on the reboot it just went straight back to the tri colour screen again.. So no help there.

NoNco said:
@ Jocky...
I eventually managed to do a hard reset, the problem was it just kept going to the bootscreen so i tried it with the headphones pluged in and then it worked, lol, but on the reboot it just went straight back to the tri colour screen again.. So no help there.
Click to expand...
Click to collapse
Hmm, looks like a bootflag related to USB is set. The reason could indeed be a physical problem with the usb port of the device. Also it could be related to dirty contacts (both of the UB port and the battery).

I’m having the exact same problem with my S730. Only works with the headphones plugged. I can’t hear nor talk if unplugged the headphones. Does anyone knows how to fix this ???

Mda won't sync or charge after bad flash

I was following the guide for putting the button rom, and then the loki. all that went ok. The problem was I replaced the nbk file of the ipl/spl 3.08 file with the one from a radio download (radio 27111) and when it flashed now the phone doesn't recognize anything plugged into the usb port. Won't charge or nothing. no lights come on . I tried holding the camera and power button, and then pressiong the reset button, taking both hands off the buttons and then pressing power again and holding it to get in the bootloader multicolor screen, and it doesn't recognzie it either on my pc there. any suggestions?
it still loads the buttons flash rom and goes to the phone itself (old stock windows mobile) and pressing the start button takes like 15 secs to show the drop down start menu.

oh also it still says ipl 1.08 and spl 1.08 in the buttons splash pic....
although i was trying to put that 3.xx one

if anyone has:
tmobile RUU_Prodigy_1081002_108_10910_TMO_US.exe
please send me or give me a link. I tried googling but they all lead to the ftp server here (as we know has no files now on it). Someone said that worked for them. I tried another tmobile official one and it doesn't work. In boot loader (the multicolor screen) when i connect the usb the word usb shows, but the rom program on xp doesn't see it and I get an error 260 update error which says it can't connect to my phone.
Update: I tried the newest official tmobile software from their site and it does nothing. It does show the "usb" at the bottom in bootloader when I connect it, but the tmobile software (or anything) doesn't recognize it and gives a error 260.
When in windows (as it still goes) it shows the unknown battery thing and doesn't show how much battery life is there, along with being real slow. I didn't have a sim card in it ever while doing this but prob has no service either.

eh
50 views and im the only one with that problem ever? no one knows?

correction. it DOES charge.

same problem
hey, Ihave exactly the same problem, any luck finding a cure for this? would like to flash another rom but can't sync, do you know how to flash from SD card maybe that'll help us?

petesavva said:
hey, Ihave exactly the same problem, any luck finding a cure for this? would like to flash another rom but can't sync, do you know how to flash from SD card maybe that'll help us?
Click to expand...
Click to collapse
does your read sd cards?
no luck yet.

Hello,
Let`s start... maybe this will help you too guys... But first of all i want to know if your phone`s go in bootloader mode... ( just reset with the stylus and then hold just the camera button) and then it goes in the 3 color screen...
Let me know if you`ve got your phone`s in bootloader mode.... Replay as soon as posible... and... did you`ve tried another USB cable?
If you want to charge the phone, get the battery out, put it back, put the charger in, then hold the power button until it starts chargeing... 10-15 seconds max.
And if you get the phone in bootloader mode do this: http://forum.xda-developers.com/showpost.php?p=4104858&postcount=3
Regards.

eXPLOiTeD said:
Let`s start... maybe this will help you too guys... But first of all i want to know if your phone`s go in bootloader mode... ( just reset with the stylus and then hold just the camera button) and then it goes in the 3 color screen...
Let me know if you`ve got your phone`s in bootloader mode.... Replay as soon as posible... and... did you`ve tried another USB cable?
If you want to charge the phone, get the battery out, put it back, put the charger in, then hold the power button until it starts chargeing... 10-15 seconds max.
And if you get the phone in bootloader mode do this: http://forum.xda-developers.com/showpost.php?p=4104858&postcount=3
Regards.
Click to expand...
Click to collapse
it is in boot loader.. shows ipl 1.01 and spl 1.08 in the red section, and when i connect usb cable (good one) usb shows on the white at the bottom. in device manager i dont have the windows cd usb devices. in fact the pc doesnt even beep.

hnmm
bump......

<Challenge> Diamond wont go Bootloader

Hello,
I have here a diamond unit, that client complained about this issue from months ago.
Volume key (-) doesn´t seem to function correctly.
As so he can´t enter in bootloader by pressing volume key(-) + power button.
The problem is that phone is now stuck at WM startup. And I can´t put it in bootloader to flash it.
He´s stuck at tap screen align, just random reset itself.
I can hear the sound of USB connection with PC, but not fully connected to activesync, so back again, can´t detect himself to start RUU process.
I need some ideas...
BTW: Yes I know where the problem of volume key is. It´s on the PCB board connector with flex. But can´t fix here at home, will need wait few days to come into the office and try repair. Meanwhile would be awesome to be able to flash it and put it at normal work again.

Drug_Store said:
Hello,
I have here a diamond unit, that client complained about this issue from months ago.
Volume key (-) doesn´t seem to function correctly.
As so he can´t enter in bootloader by pressing volume key(-) + power button.
The problem is that phone is now stuck at WM startup. And I can´t put it in bootloader to flash it.
He´s stuck at tap screen align, just random reset itself.
I can hear the sound of USB connection with PC, but not fully connected to activesync, so back again, can´t detect himself to start RUU process.
I need some ideas...
BTW: Yes I know where the problem of volume key is. It´s on the PCB board connector with flex. But can´t fix here at home, will need wait few days to come into the office and try repair. Meanwhile would be awesome to be able to flash it and put it at normal work again.
Click to expand...
Click to collapse
If you can boot windows look in my signature there is a Boot loader tool and it works on diamond i have tested it
Also there is a post for forced boot loader mode for htc prophet\wizard involves connecting power to pins manually will this work for Diamond ?

Ok finally fixed it
Explored the thing about hearing USB connecting... WIN7 would never been possible, but under XP and activesync, that was enough to connect and flash.
@wapvirus
Yes, I thought about power pinout, but could require advanced tools, which I don´t have at home...

Phone-PC brick with no working 3 button - options?

Hi all,
I was flashing between Jf6 and JH7 today, wanted to see if flashing JH7 via different methods would give me a 3 button fix. (If it did fix it then flashing via Kies mini didn't do the job)
Ironically it backfired when Odin froze and I flipped out the battery
(Hey, I've been at the dl screen before when it was doing nothing and it survived!)
I plug the USB in, I get the exclamation screen
Do it with volume keys pressed, still get it
Hold down the volume + power and the screen goes blinking between exclamation and blank. I've tried releasing power keys at each point in those screens
I even took a video incase I'm not doing it right. Odin is running in the background. No USB plug-in 'pings' from Windows, as you can hear.
Anything I can do?
btw my bat build date is 8/13.. that bad week
I'm in Australia (bought phone off ebay) so sending it back to the States will be a bit of trouble.. I'm hoping I can work something out with the ebay seller otherwise I'll buy another cappy and hope someone finds the jtag points I guess.

same here. no button combo method that previous worked is working now. :/

OP, did you see this thread: http://forum.xda-developers.com/showthread.php?t=775911
not working for me, but maybe it'll help you ... ?

Tremere said:
Hi all,
I was flashing between Jf6 and JH7 today, wanted to see if flashing JH7 via different methods would give me a 3 button fix. (If it did fix it then flashing via Kies mini didn't do the job)
Ironically it backfired when Odin froze and I flipped out the battery
(Hey, I've been at the dl screen before when it was doing nothing and it survived!)
I plug the USB in, I get the exclamation screen
Do it with volume keys pressed, still get it
Hold down the volume + power and the screen goes blinking between exclamation and blank. I've tried releasing power keys at each point in those screens
I even took a video incase I'm not doing it right. Odin is running in the background. No USB plug-in 'pings' from Windows, as you can hear.
Anything I can do?
btw my bat build date is 8/13.. that bad week
I'm in Australia (bought phone off ebay) so sending it back to the States will be a bit of trouble.. I'm hoping I can work something out with the ebay seller otherwise I'll buy another cappy and hope someone finds the jtag points I guess.
Click to expand...
Click to collapse
You may also want to try removing and then reinstalling the Samsung USB drivers on your PC.

I've verified there is simply no USB device being registered no matter what OS, the phone is just sucking power.
@The_Bishop: Did see that, exactly the same as yours, plug usb in, get that screen
Anyone want to be awesome and send my Capppy back to Samsung on my behalf?

best method that never dies when i was in your situation......
unplug usb, turn phone off, then put battery in, turn odin on, now hold volume buttons ONLY then insert usb in phone, you will see download mode with odin identifying the port;
hope it worked ?!?!?!?

Believe me I have tried everything. There is simply was and still is no way to enter recovery or download mode on this phone. Its hardware locked!

a little off topic, but how do i find my phones "bat build date" ?

I had the exact same problem. If you do a battery pull.. hold down both volume buttons and plug the usb cable into the phone while it's hooked to PC then it bumps you into Download mode. I did the exact same thing you did and am running froyo at the moment.
Oh.. no power button.. just both volume buttons.

YoungGun821 said:
a little off topic, but how do i find my phones "bat build date" ?
Click to expand...
Click to collapse
Is on the underside of the battery, one facing into the slot.
i.e 2010.08.13
terrigan said:
I had the exact same problem. If you do a battery pull.. hold down both volume buttons and plug the usb cable into the phone while it's hooked to PC then it bumps you into Download mode. I did the exact same thing you did and am running froyo at the moment.
Oh.. no power button.. just both volume buttons.
Click to expand...
Click to collapse
Done that. Exactly what happens in video. Both volume buttons down, plug in usb.. no response, just brick screen.

I had the same problem.. the phone didn't register USB.. have you rebooted the computer? I believe i did that at one point.

terrigan said:
I had the same problem.. the phone didn't register USB.. have you rebooted the computer? I believe i did that at one point.
Click to expand...
Click to collapse
I did try once or twice. From another thread it was also said to disable driver verification on windows startup for x64 machines. which I also did.
Basically I want to hear from someone who:
a) has a captivate that could never enter dl/rescue via buttons, only adb
b) captivate didn't trigger a plug in 'ping' from Windows until they ??
FYI this is a Macbook Pro, and I booted into Win7 x64 Pro for flashing.

Hi I have the same problem..
What I did was this rooted with one click.. loaded Cognition 2.1.6 all was good..I saw the froyo so I thought lets try it. so opened up ODIN put it in recovery mode. with ADB could never get it in the button way.. it started to load and it froze. I didn't disable voodoo and IS THAT WHY I AM STUCK? I have tried every combo changed drivers computer will not see the phone.. is it a AT&T Phone
IS there anyway to fix it?? or can someone make a program to fix this? I would make a big donation if they did!!!
Thanks Forum!!

Yeah I had it in adb mode to enter download mode, maybe that is why it won't start back up.
I've now given the phone to a local mobile repair business, if riffbox or someone comes out with a Captivate rescue soon its probably as a end result of me

I sent mine back to Samsung as well. BTW, I have a battery from 2010.08.12 so I might be in the same boat. Wish I'd have used one of my OEMs to see if that made any difference, but I did not. :/

I have the same issue.
Rooted my phone through adb, which was fine. Couldn't get into recovery/download modes with hardware before then.
Now my phone is bricked, and not detected or even charging via USB.
wtf

If the repair shop cant fix it try this:
1.) Remove Battery, SIM Card and External SD
OR
2.) Press and HOLD VOL UP AND DOWN with USB inserted and THEN slap in the battery.
This worked for me, for some reason inserting the battery last did the trick.

Let me know if anyone finds a solution to this I have tried it all and my computer will not detect my phone. Has Samsung blocked this in there firmware?

Did you try what I posted above?

yep nothing if I could get it to detect in command prompt I could force it but it won't... the button thing didn't even work when the phone worked!
So ....

Help please! Device died after rooting

hey guys!
Can anyone please help me with my problem.
I was trying to root my device using this toolkit HTC_QuickRoot_1.1.10_Release (1)
The process worked fine until it rebooted my sensation XL.
Now it wont turn on. I tried charging it and it is currently connected to my PC through USB,,the orange LED on the top of the device doesnt even show.
I am hoping its only a battery problem.
If anyone has had the same problem and has any fix just in case it is not a battery problem would be much appreciated.

You can try taking it to a phone store, and asking to try a diffrent battery in your phone. But it sounds to me like a H/W fault. The method of root you used is not familiar to me. Are you sure its compatible with the SXL?
Sent from my iPhone 4S using Tapatalk

i think that the HTC_QuickRoot has never been tested with SXL
anyway remove and replug the battery and try to enter bootloader mode with power+vol Down
if its working u can unlock, flash new hboot, recovery and a custom rom
everything Here thanks to stona175
if u can't enter the boot loader connect the SXL to your PC and check in device manager for this device
QUALCOMM QHUSB_DLOAD, if u find it, it means that your phone is bricked

Ok so i took out sim + battery for about 20 mins. Put it all together then plugged it through usb.
good thing and I hope it only gets better. Orange led is now showing,
I thoroughly searched for QUALCOMM QHUSB_DLOAD in my device manager and it is nowhere to be found.
Tried POWER + Vol DOWN button to enter bootloader, but nothing happen
is there a tool when i can access my device through the PC?

well my SXL seems like its totalled. Orange LED is still on even though it is not charging or connect through USB

jemza said:
well my SXL seems like its totalled. Orange LED is still on even though it is not charging or connect through USB
Click to expand...
Click to collapse
To enter bootloader try this: remove battery, put it in again, hold FIRST vol down and THEN (without releasing vol down) power. Give it a try, you never know...

jemza said:
Ok so i took out sim + battery for about 20 mins. Put it all together then plugged it through usb.
good thing and I hope it only gets better. Orange led is now showing,
I thoroughly searched for QUALCOMM QHUSB_DLOAD in my device manager and it is nowhere to be found.
Tried POWER + Vol DOWN button to enter bootloader, but nothing happen
is there a tool when i can access my device through the PC?
Click to expand...
Click to collapse
If your device is showing as QHUSB_DLOAD, then your going to need to use something like jtag to repair it, or a service centre.
Sent from my iPhone 4S using Tapatalk