Hi,
My Trinity's mini usb has packed up and I need to flash the original Orange rom (Which I have) from the sd card as the 'phone is under warrenty. I've formatted the card in fat32 and renamed the RUU_signed.nbh file to TRINIMG.nbh as per wikki, but I only get the bootloader screen, not the one shown on the wikki page.
Can anyone help me?
Thanks in advance to all the members of this fantastic forum!
eadon said:
Hi,
My Trinity's mini usb has packed up and I need to flash the original Orange rom (Which I have) from the sd card as the 'phone is under warrenty. I've formatted the card in fat32 and renamed the RUU_signed.nbh file to TRINIMG.nbh as per wikki, but I only get the bootloader screen, not the one shown on the wikki page.
Can anyone help me?
Thanks in advance to all the members of this fantastic forum!
Click to expand...
Click to collapse
Make sure your SD Card has no label!
tnyynt said:
Make sure your SD Card has no label!
Click to expand...
Click to collapse
Thanks for the reply.
As far as I know it hhas no label (Just called SD Card in explorer). How can I tell?
i've got the same problem.
SD card has no name (according to windows explorer), and is FAT32.
eadon said:
Thanks for the reply.
As far as I know it hhas no label (Just called SD Card in explorer). How can I tell?
Click to expand...
Click to collapse
Card reader... or WM5toarge
tnyynt said:
Card reader... or WM5toarge
Click to expand...
Click to collapse
Thanks tnyynt, I'm sorry but I've looked at the properties of the card using a card reader in vista and can see no referance to "Lables". I'd really apreciate it if you could spell it out for me.
Thanks so much
eadon said:
Thanks tnyynt, I'm sorry but I've looked at the properties of the card using a card reader in vista and can see no referance to "Lables". I'd really apreciate it if you could spell it out for me.
Thanks so much
Click to expand...
Click to collapse
right click, properties and if it is an empty box at the top it's good.
I'd recommend to save all your files to your PC and format the card to FAT32 in your card reader, then copy the TRINIMG.nbh to your card's root.
tnyynt said:
right click, properties and if it is an empty box at the top it's good.
I'd recommend to save all your files to your PC and format the card to FAT32 in your card reader, then copy the TRINIMG.nbh to your card's root.
Click to expand...
Click to collapse
Thanks again! Done all that, still only boot screen! Info on boot screen:
----------------
Trin100
IPL-0.50
Trin100 MFG
SPL-1.30.Olipro
-----------------
Do I have to worry about this?
"For normal (non preproduction) devices keep in mind that if the CID does not match the flashing will not work. The CID for each ROM is listed on the Trinity Upgrades page. You can see your device's CID using info 2 bootloader command or using GetDeviceData.exe"
Sorry for all this, but phone is F***ed if I cannot gett this sorted
eadon said:
Thanks again! Done all that, still only boot screen! Info on boot screen:
----------------
Trin100
IPL-0.50
Trin100 MFG
SPL-1.30.Olipro
-----------------
Do I have to worry about this?
"For normal (non preproduction) devices keep in mind that if the CID does not match the flashing will not work. The CID for each ROM is listed on the Trinity Upgrades page. You can see your device's CID using info 2 bootloader command or using GetDeviceData.exe"
Sorry for all this, but phone is F***ed if I cannot gett this sorted
Click to expand...
Click to collapse
Maybe it is a problem with the HardSPL. I see you have 1.30, I've heard people reporting some issues. I am using Des' Crash Proof and all is ok!
tnyynt said:
Maybe it is a problem with the HardSPL. I see you have 1.30, I've heard people reporting some issues. I am using Des' Crash Proof and all is ok!
Click to expand...
Click to collapse
I suppose that there is no way of flashing this from sd card if I can't flash anything else. Got a bad feeling!
No resulution yet
try this
copy Des Crash Proof Bootloader and TRINIMG.nbh to the SDCard.
On the phone use a file manager to get to the SDCard and run Des Crash Proof Bootloader.
The phone should restart and use Des instead of Olipro. The ROM should then update.
I've used the same process on my M700 without any problems.
Hope it helps
moodog101 said:
copy Des Crash Proof Bootloader and TRINIMG.nbh to the SDCard.
On the phone use a file manager to get to the SDCard and run Des Crash Proof Bootloader.
The phone should restart and use Des instead of Olipro. The ROM should then update.
I've used the same process on my M700 without any problems.
Hope it helps[/QUOTEThanks Moodog and tnyynt, I feel I'm getting somewhere. The only Des's Crashproof I can find is a zip file named "Crashproof.SPL.TRIN" with the actual file called "RUU_signed.nbh".
I cannot open this file in file explorer on my PPC.
Is there an executable version of Des's Crash Proof Bootloader?
This would solve all my problems.
Thanks again, I have scoured the forum for an answer.
Click to expand...
Click to collapse
eadon said:
moodog101 said:
copy Des Crash Proof Bootloader and TRINIMG.nbh to the SDCard.
On the phone use a file manager to get to the SDCard and run Des Crash Proof Bootloader.
The phone should restart and use Des instead of Olipro. The ROM should then update.
I've used the same process on my M700 without any problems.
Hope it helps[/QUOTEThanks Moodog and tnyynt, I feel I'm getting somewhere. The only Des's Crashproof I can find is a zip file named "Crashproof.SPL.TRIN" with the actual file called "RUU_signed.nbh".
I cannot open this file in file explorer on my PPC.
Is there an executable version of Des's Crash Proof Bootloader?
This would solve all my problems.
Thanks again, I have scoured the forum for an answer.
Click to expand...
Click to collapse
http://forum.xda-developers.com/attachment.php?attachmentid=42938&d=1183561237
Click to expand...
Click to collapse
tnyynt said:
eadon said:
http://forum.xda-developers.com/attachment.php?attachmentid=42938&d=1183561237
Click to expand...
Click to collapse
I'm embarresed to keep asking, but...
I've put the contents of "Hard-SPL_ZakMcRofl" (Thanks tynnyt), with the "trinimg.nbh" file I want to use. First of all the "ROMUpdateUtility" will not execute in Windows Mobile. I can start "EnterBootloader", which takes me to the des bootloader screen, but no further, it does not initiate the "trinimg.nbh".
There's probably more wrong with the 'phone than I think, so I wait for the battery to drain, get a replacement from Orange and hope that they just bin it!
Thanks for all your help.
Click to expand...
Click to collapse
Just on the off chance, do you happen to be flashing from a SDHC card? I can't get mine to read NBH files always have to carry my 2GB whenever I want to flash a ROM.
Obviously not the only person that thinks so... here
Related
hi all,
I need to dump a rom from a mda III to a SD.
Who knows the right procedure? Is it the same of the himalaya?
thanks mates..
boobee
boobee said:
hi all,
I need to dump a rom from a mda III to a SD.
Who knows the right procedure? Is it the same of the himalaya?
thanks mates..
boobee
Click to expand...
Click to collapse
Go in bootloader mode, (yes, the device will factory reset, so backup before) by pressing all at the same time: power, record and the reset button.
Cradle the device, kill the processes wcesmgr.exe and wcescomm.exe if they are active.
Connect to the device with a terminal program that supports USB serial connections.
http://www.xda-italia.com/modules.php?name=News&file=article&sid=93
Ensure to take the whole device, so use the three lines.
“d2s 80000000 02000000“
“d2s 60000000 00300000 sd a“
“d2s 70000000 01080000 sd a“
Please be carefull not to interrupt the dump process, your dump will still work and checksum OK but the resulting SD card will not result in a working device after loading from it.....
I did it with success a couple of times, and scr$$ed up once because I had an error during the dumping of the image and still tried to load that image on another device.
Good luck.
Willem.
thank you Willem for your kind reply..
seen also how to restore it on the link you provided.
thanks again
boobee
Well for your info, it is working to save the ROM on the SD, but if you try to restore it, it won't work
SD Download
Sections = 3
Not Allow Update!
My Qetk is stuck in Bootloader and ask a friend of mine to do this trick, (same model) and it do not work
I think some addresses are not correct
In the saved dump of GSM module there were no any ST commands found. So i think XDA3 MDA3 memory map is not same.
Max
Anonymous said:
Well for your info, it is working to save the ROM on the SD, but if you try to restore it, it won't work
SD Download
Sections = 3
Not Allow Update!
My Qetk is stuck in Bootloader and ask a friend of mine to do this trick, (same model) and it do not work
Click to expand...
Click to collapse
YYMV..... Tried it again this morning, works fine as per the previous post. My bootloader is a 2.06, do you have the same bootloader version ?
Regards,
Willem
Anonymous said:
Well for your info, it is working to save the ROM on the SD, but if you try to restore it, it won't work
SD Download
Sections = 3
Not Allow Update!
My Qetk is stuck in Bootloader and ask a friend of mine to do this trick, (same model) and it do not work
Click to expand...
Click to collapse
YYMV..... Tried it again this morning, works fine as per the previous post. My bootloader is a 2.06, do you have the same bootloader version ?
Regards,
Willem
Check here:
http://forum.xda-developers.com/viewtopic.php?t=12298
wmeter said:
“d2s 80000000 02000000“
“d2s 60000000 00300000 sd a“
“d2s 70000000 01080000 sd a“
Click to expand...
Click to collapse
is RIGHT.
SD Download
Sections = 3
Not Allow Update!
Click to expand...
Click to collapse
If you are getting the error above, that means, that the SD image was done on different device than yours. If you want to avoid it, you have to have SD image done on your device, and you have to copy it's header out of it and then paste it over your friend's SD image header.
buzz
buzz_lightyear said:
Check here:
http://forum.xda-developers.com/viewtopic.php?t=12298
wmeter said:
“d2s 80000000 02000000“
“d2s 60000000 00300000 sd a“
“d2s 70000000 01080000 sd a“
Click to expand...
Click to collapse
is RIGHT.
SD Download
Sections = 3
Not Allow Update!
Click to expand...
Click to collapse
If you are getting the error above, that means, that the SD image was done on different device than yours. If you want to avoid it, you have to have SD image done on your device, and you have to copy it's header out of it and then paste it over your friend's SD image header.
buzz
Click to expand...
Click to collapse
I think that should be rewritten as "same bootloader version" since I restored the image on another device w/a problem. Works fine. Guess that the dumps are differently done per bootloader version.
I'm not quite sure. That header is some kind of checksum...
In wiki it says that the checksum depends on the SD card... however, it could depend on the bootloader version.
But then, I have 1.06 and i took the chinese 696 SD ROM image, which has 1.06 BL as well, but I was getting "Not allow update" till i changed the header from my SD card...
buzz
buzz_lightyear said:
SD Download
Sections = 3
Not Allow Update!
Click to expand...
Click to collapse
If you are getting the error above, that means, that the SD image was done on different device than yours. If you want to avoid it, you have to have SD image done on your device, and you have to copy it's header out of it and then paste it over your friend's SD image header.
buzz
Click to expand...
Click to collapse
how can I do this ?
Indeed the rom is coming from another Qetk but both were french...
wmeter said:
Anonymous said:
Well for your info, it is working to save the ROM on the SD, but if you try to restore it, it won't work
SD Download
Sections = 3
Not Allow Update!
My Qetk is stuck in Bootloader and ask a friend of mine to do this trick, (same model) and it do not work
Click to expand...
Click to collapse
YYMV..... Tried it again this morning, works fine as per the previous post. My bootloader is a 2.06, do you have the same bootloader version ?
Regards,
Yes bootloader 2.06, but the SD has been made on another Qetk, both in French and no operators
Willem
Click to expand...
Click to collapse
Hi Daimaou,
You need to change/overwrite the header of the SD card data. Please
see the posts from buzz_lightyear for this.
Willem
wmeter said:
Hi Daimaou,
You need to change/overwrite the header of the SD card data. Please
see the posts from buzz_lightyear for this.
Willem
Click to expand...
Click to collapse
thanks I am trying to find it now, but could you be more specific :x coz ouch there are some post to read before I can find it !
@daimaou
hi,
do you have a working device or is it dead?
i mean, can you boot it?
buzz
Hi !
my device is stuck in bootloader
V 2.06, I ask a friend of mine in france to dump its rom on a SD, while I am trying to put it on my Qetk I got Section 3 not allowd
So it seems that my friends SD is OK, but cannot use it, any idea?
I need my Qetk working soon since I will fly to China and US
Daimaou said:
Hi !
my device is stuck in bootloader
V 2.06, I ask a friend of mine in france to dump its rom on a SD, while I am trying to put it on my Qetk I got Section 3 not allowd
So it seems that my friends SD is OK, but cannot use it, any idea?
I need my Qetk working soon since I will fly to China and US
Click to expand...
Click to collapse
that's not that bad at all. keep your friends SDimage for now.
did you try to rerun the official ROM package for your device?
just give it a try... cradle it and run it...
don't use any USB hub, jUst straight USB connection to your PC...
let me know then...
buzz
buzz_lightyear said:
Daimaou said:
Hi !
my device is stuck in bootloader
V 2.06, I ask a friend of mine in france to dump its rom on a SD, while I am trying to put it on my Qetk I got Section 3 not allowd
So it seems that my friends SD is OK, but cannot use it, any idea?
I need my Qetk working soon since I will fly to China and US
Click to expand...
Click to collapse
that's not that bad at all. keep your friends SDimage for now.
did you try to rerun the official ROM package for your device?
just give it a try... cradle it and run it...
don't use any USB hub, jUst straight USB connection to your PC...
let me know then...
buzz
Click to expand...
Click to collapse
Yes I did, but the PB that so far no Official ROM image in French exist, I tried the UK (WWE one) but always Country ID Error, whatever I am doing (used the xda3nbftool.exe)
this is how to do it on xda2, but you can give it a try:
Download upgrade/downgrade package from your favourite provider
Unpack it into some directory (use WinZip or WinRAR)
Delete "GetDeviceData.exe" and "enterBL.exe" (don't edit .nbf files)
Restart your device in bootloader mode and cradle it (OPTIONAL)
Run "BAUpgradeUt.exe"
i typed those .exe names just from my head (sitting in the car right now), so maybe they are slightly different...
buzz
Doesn't work
error 120, country ID, 11-11-12-12-12
:x
I don't want to be rude but it is 1:17 AM in Tokyo now, and need to wake up early tomorrow, so cannot continue now, but please don't let me down I don't want to send my Qetk back to France and wait a month to have it back...
if you need my email address please send anything there
gagayjp[at]gmail.com
Cheers
I have O2 XDA III (german), with radio rom v.1.10.0.
I've tried to find the way how to backup that rom and upload it to FTP. Can someone tell me how to do that. I've searched the wiki, but I didn't found the real solution.
Do I need to use XDArit or XDAtools? Can I do it under Win98, or I need WinXP/2000?
I have SD card and SD card reader.
I've described the process here:
http://forum.xda-developers.com/viewtopic.php?t=18128#98117
You can do this under Win98.
mamaich said:
I've described the process here:
http://forum.xda-developers.com/viewtopic.php?t=18128#98117
You can do this under Win98.
Click to expand...
Click to collapse
I've tried this and it doesn't work. When I press ok, I don't get terminal window. I've also tried this using COM2 (thats my modem) and it works fine, but with usb I don't get nothing
you should terminate Activesync before running MTTY. Kill processes wcescomm.exe and wcesmgr.exe with task manager and enter bootloader on your device (press and hold power+camera buttons and reset). The screen would write "serial ...", insert it into cradle, screen would write "USB ...". Run MTTY, select "usb" or "\\.\wcescom01" port and everything should work.
And don.t forget to do a backup, this will hard reset your device.
Thanks in advance for sharing your Radio! I've asked in any Forum, i know, but nobody seemed to cooperate. So it is great hearing somebody helps us.
mamaich said:
you should terminate Activesync before running MTTY. Kill processes wcescomm.exe and wcesmgr.exe with task manager and enter bootloader on your device (press and hold power+camera buttons and reset). The screen would write "serial ...", insert it into cradle, screen would write "USB ...". Run MTTY, select "usb" or "\\.\wcescom01" port and everything should work.
And don.t forget to do a backup, this will hard reset your device.
Click to expand...
Click to collapse
The problem was in win98, in WinXP everything worked fine. So, this stuff doesn't work with win98. When I backuped it, I couldn't transfer the backup on my computer (ntrw transfers 256Mbytes and says that something is wrong with the image). I think the problem is that I have MMC card, not SD card. I should get SD card today, and I hope that everything will work then.
Hope the upload will work, just put it in the root dir, as you can not put it in any of the folders.
Curious to see if this further improves GSM/GPRS etc...cheers!
Can't wait to hear the feedback on the 1.10 radio. I was going to go 1.08 but seems like a waste when this one is so close.
Ok, HappyGoat, do you have the path you saved too for this magic Radio?
1.08 is nice, works fine. Of course I must upgrade for no reason other than insanity, hence Im looking for the file.
Thanks
Rich
Is it also possible to extract the whole ROM from your device, so that I can update my SPV M2000 with your O2 ROM?
Any news about this new radio rom?
ringram said:
Ok, HappyGoat, do you have the path you saved too for this magic Radio?
1.08 is nice, works fine. Of course I must upgrade for no reason other than insanity, hence Im looking for the file.
Thanks
Rich
Click to expand...
Click to collapse
The Radio 1.08.00 is available again on the ftp server. Have a look in the BlueAngel folder, it's in there.
Any progress on getting the radio 1.10.00 version...?
I've borrowed SD card from a friend, and I have to bring it back until saturday. So, I need some quick answers.
It is 256Mbyte SD card. I've done the procedure of backup like instructed. You can see my log in attachment.
After that I put the card in Transcend 7 in 1 card reader. I've used ntrw to backup the SD on my computer, but something is wrong. It creates 256MByte file on my computer. The picture of console window is in attachment. I did like I was instructed, and i've also tried "d2s" (to backup only WinCE) and all combinations (only Radio Rom etc.), but the result is the same.
Any suggestions? I really need to do this quickly.
Try this command in DOS:
Code:
C:\ntrw read XDAIIs.nb1 i:
Just might work, not sure. In either case, thanks alot for trying and sharing this with us...
No ideas?
DreamerNS said:
I've borrowed SD card from a friend, and I have to bring it back until saturday. So, I need some quick answers.
It is 256Mbyte SD card. I've done the procedure of backup like instructed. You can see my log in attachment.
After that I put the card in Transcend 7 in 1 card reader. I've used ntrw to backup the SD on my computer, but something is wrong. It creates 256MByte file on my computer. The picture of console window is in attachment. I did like I was instructed, and i've also tried "d2s" (to backup only WinCE) and all combinations (only Radio Rom etc.), but the result is the same.
Any suggestions? I really need to do this quickly.
Click to expand...
Click to collapse
DreamerNS,
it is normal that you get a 256MB file, because your card has this kind of size!
The ntrw tool makes a full copy of your SD card it don't know how much data on your card is stored.
So make a full backup of your XDA, zip the 256MB file and upload the file to the ftp site.
Greetings
osch
DreamerNS said:
No ideas?
Click to expand...
Click to collapse
My suggestion did not work?
HappyGoat said:
DreamerNS said:
No ideas?
Click to expand...
Click to collapse
My suggestion did not work?
Click to expand...
Click to collapse
No. It is just filename, you can put anything you like there. it can be xdaIIs.nb1 or xdaIII.nb1 or IdontKnow.nb1 it doesnt change things, but thanks anyway.
It's too much for me to upload 256Mbytes. I have only dialup connection. Is there any way to extract radio rom from 256Mbyte file? If everything is allright, why is it says "ReadFile(): xdaIII.nb1 -- parameter is incorect"?
DreamerNS,
The unused bytes in the 256MB file will probably be zeros, and should compress to just a few kb.
Back in the days when mp3 FTP sites were all the rage (before P2P) I used to take advantage of highly compressable data like that. Sometimes you'd get a site where you'd have to upload a certain amount of MP3s before you could download. All you'd have to do is create a huge black .BMP file and rename it .mp3. Thanks to dial up modems automatic compression, you could upload a 10MB "mp3" in seconds! Hehehe
-no1
Going back to the problem, is I: the correct drive letter for your card reader's SD slot?
-no1
Hi, Rhodium WM 65 Europe rom is here for download, so chefs, prepare your kitchens.
Thanks to the Dev team at HTCPedia.
RUU_Rhodium_S_HTC_Europe_09.06.24.1038_Radio_Rhodium_3.46.25.18_Signed_80331.exe
http://htcpedia.com/forum/showthread.php?p=4701#post4701
WM6.5 Rhodium
Thanks! Downloading now, i'll let you know the results
denied
I got ERROR [244] : INVALID MODEL ID . I have a US TP2 with QMAT. any ideas?
Have u made a goldcard?
that's so great! thanks for share man!!!
Confirmed working and is wm6.5.
Flashes upto 10% then restarts bootloader and continues flashing until 100%
Shows Test Only- Not for Sale on first splash..
Then prepares the device for 1st time use..
Posting screenshots soon...
goldcard
maybe i made my goldcard wrong. just redid it and rerunning the update. I'll let you know.
Thanks!
Look at the post above.
Glad u liked the surprise.
A few shots...
bukwit said:
A few shots...
Click to expand...
Click to collapse
Man, you´re fast, it seems like you´re waiting for it.
ark666 said:
Man, you´re fast, it seems like you´re waiting for it.
Click to expand...
Click to collapse
Oh yes!!..
Im new to windows mobile but not to flashing, how would i flash this? aw screw it ill SEARCH haha.
same problem
I'm getting the same error message. I must be creating my gold card incorrectly. can anyone please assist. I have a registered copy of QMAT.
1. I format the SD Card - Fat32
2. I choose HARDWARE FORENSICS and Generate Gold Card.
3. I choose Rhodium as the device key
4. I click GET SD CARD SERIAL FROM WINCE DEVICE
5. I choose SAVE GOLDCARD IMAGE TO WINCE SD
6. I check to make sure it saved a file to the SD
am i missing anything? do i need to fill in "security level, bootloader-version, time:, device ID " ??
Thanks
Mark
atreu69 said:
I'm getting the same error message. I must be creating my gold card incorrectly. can anyone please assist. I have a registered copy of QMAT.
1. I format the SD Card - Fat32
2. I choose HARDWARE FORENSICS and Generate Gold Card.
3. I choose Rhodium as the device key
4. I click GET SD CARD SERIAL FROM WINCE DEVICE
5. I choose SAVE GOLDCARD IMAGE TO WINCE SD
6. I check to make sure it saved a file to the SD
am i missing anything? do i need to fill in "security level, bootloader-version, time:, device ID " ??
Thanks
Mark
Click to expand...
Click to collapse
My friend have u extracted the ruu_signed.nbh? and renamed it to RHODIMG.NBH?? And copied it to your sd??
That´s the steps, though if you have any doubts, there are plenty of threads about it.
Good luck with it.
Im having trouble finding instructions to flash this could someone post, i already have a gold card made. Thanks in advance ill keep looking.
are goldcards device specific?
Thanks
working good for me
flashed with goldcard
Thanks
I'm new to this and I'm searching on how to flash using goldcard. I have no idea what that means and I can't find any results.
Can some post a full instruction or a link to a full instruction so I can add this ROM to my TP2? Thanks!!!
This doesnt work without the full version of qmat which is 20 euros. I dont have that kind of money on me right now so ill wait till i get paid or hardspl comes out.
What is QMAT?
0. Make sure phone is hard-spl first
1. Make sure SD card is formatted with fat-32
2. rename the image file (ruu_signed.nbh) to rhodimg.nbh, then copy that to the ROOT OF THE MICRO SD CARD, Insert card into phone
3. Set your phone in bootloader (Hold the "volume down" and hold the power on button until you see the tri-color screen.
4. Then follow the on-screen instruction
5. (OPTIONAL) -after flash, make sure to hardreset (pull battery, insert battery then hold green and red PHONE buttons (send/end) and hold powerbutton) follow onscreen instruction.
thanks for the info
I've tried the above and somehow it won't work on my TP2, it stays at "Serial" text in the white box, I'm assuming it already went past the SD slot then? Checking for the image.
I have the Energy rom loaded on the SD card, named as explained in the first post in this topic, it is placed in the root of the SD card, no folders or other files exist on that card. I removed the SIM card from the phone just to be sure. Is there anything I am missing, or is there anyone else who actually used this method to flash his or her device?
Info:
SPL: OliNex 0.85
ROM: |RHOD|6.5|ROM|WWE| ★ EnergyROM "Warhawk" (23016) ★ | Built Aug 21 |Manila 2.5 / 2.1|
SD Card: 4GB MicroSDHC (No brand on card, supplied with the branded T-Mo TP2 (Vario V)
Formatted: fat-32
Thanks
The nbh file needs to be in capital letters! RHODIMG.nbh
And step 5 isnt to be done until the "Tap screen to set up device" screen!
Just reset when your phone says Update successful!
And done, name changed to the correct format. No luck. Reformatting the card now to see if that changes anything. Update in a few.
And that too didn't work sadly. Either someone here notices I'm doing something wrong, or I'll just wait till I get near a machine natively running Windows Running Mac OS here so can't run the executable, and read that it's not quite a good idea to flash it from a virtual OS.
PositiveCreep said:
And done, name changed to the correct format. No luck. Reformatting the card now to see if that changes anything. Update in a few.
And that too didn't work sadly. Either someone here notices I'm doing something wrong, or I'll just wait till I get near a machine natively running Windows Running Mac OS here so can't run the executable, and read that it's not quite a good idea to flash it from a virtual OS.
Click to expand...
Click to collapse
You will want to partition your card so the nbh image is in a partion of at the largest 1G, anything larger makes it hard for the phone to find and read the nbh file! I have a 1G card just for flashing and it works perfect! And it also may be the mac, they never play nice with windows!
It's not the mac screwing it up in this case as I am using a virtual Windows OS to work on the card. (MacOS leaves some folders on the card that I don't want on it)
Will try partitioning the card, cheers. I'll update when I know more. ANd thanks for the help ^_^
Update:
Partioned the MicroSD card to 0.5GB, no change sadly.
thanks for information
Ok, SD update worked now, however, step 5 won't go (Oh crap...) Have the grey screen with "Update Complete" and "UPDATE SUCCESS" However, it won't do anything if I hold down Send/End/Power at the same time for over 10 seconds. How long should that take normally? What's my best option right now? Can't see any other than to unplug the phone and take out the battary, however, will this brick it?
PositiveCreep said:
Ok, SD update worked now, however, step 5 won't go (Oh crap...) Have the grey screen with "Update Complete" and "UPDATE SUCCESS" However, it won't do anything if I hold down Send/End/Power at the same time for over 10 seconds. How long should that take normally? What's my best option right now? Can't see any other than to unplug the phone and take out the battary, however, will this brick it?
Click to expand...
Click to collapse
When is says "UPDATE SUCCESS", just rest with the stylus.
Dave
Thanks for the swift reply! Done it, it's booting up as I am typing this. Didn't quite have the guts to just do that without having read I could when flashing from SD. (Was unsure how the device would react to soft reset then a first booth with the SD present etc)
Anyways, rambling. Thanks!
these post are telling me how to flash while the rom is already on the phone, but i'm missing the step on how to get the rom file on the phone in order to move it to the sd card.......... how do i get the file to the phone? do i put it onto the phone from the computer or do i go to my browser on my phone and download it from there to the phone
htctpII said:
these post are telling me how to flash while the rom is already on the phone, but i'm missing the step on how to get the rom file on the phone in order to move it to the sd card.......... how do i get the file to the phone? do i put it onto the phone from the computer or do i go to my browser on my phone and download it from there to the phone
Click to expand...
Click to collapse
Everything you need to know is HERE. I really suggest you fully read the instructions so you avoid bricking your phone by mistake.
In re: making sure you're hardspl'd first, does that still apply if you're flashing an official ROM? Or just for user cooked ROMs?
I'm about to update my Verizon TP2 with the newly released official 6.5 from verizon. I'm not hard spl'd, and honestly, know very little about that particular modification.
not for official
I dont think you have to be hard SPL'd for an official ROM. I think everything is included in the ROM package. (at least for T-Mobile it is)
btw the .nbh does not have to be named in all capitals. I have personally done it both ways with no problems at all. RHODIMG.nbh works just as well as rhodimg.nbh
kwambewright said:
I dont think you have to be hard SPL'd for an official ROM. I think everything is included in the ROM package. (at least for T-Mobile it is)
Click to expand...
Click to collapse
Thanks for the quick response!
Sadly, the way the install file is set up to work, I can't get to the nbh file. It insists on installing that via an active sync connection. I was hoping it would extract from the exe and schedule it for active sync installation, then I could hunt down the ROM, copy it to my SD card, and run it from there.
fortunz said:
Thanks for the quick response!
Sadly, the way the install file is set up to work, I can't get to the nbh file. It insists on installing that via an active sync connection. I was hoping it would extract from the exe and schedule it for active sync installation, then I could hunt down the ROM, copy it to my SD card, and run it from there.
Click to expand...
Click to collapse
hmm.. sorry for kicking this post, but you can unpack the exe-file with winrar. just grab the biggest file you can find (RUU_signed.nbh, and rename it to rhodimg.nbh), copy it to your root-folder (fast way for accessing bootloader is to also copy the "EnterBootLoader.exe" -file to your SD-card, and to start that file after copying both the files). Now just enter the bootloader, and it works! (don't be scared when the screen goes black for a moment, and the bootloader has reloaded. It's meant to do that )
I still have a little question by the way: is it possible to flash the hardSPL this way? or should i rename it to something else?
No, Hard SPL needs to be done from the PC as it checks IMEI online and IP address. You only get 1 licence, can ask for more or purchase more licences, but it can't be done any other way...
ultramag69 said:
No, Hard SPL needs to be done from the PC as it checks IMEI online and IP address. You only get 1 licence, can ask for more or purchase more licences, but it can't be done any other way...
Click to expand...
Click to collapse
Yeah, it's a pity this has been done (though I understand why...)
My device cannot connect to PC anymore, so cannot use HSPL anymore!
InjecTioN said:
hmm.. sorry for kicking this post, but you can unpack the exe-file with winrar. just grab the biggest file you can find (RUU_signed.nbh, and rename it to rhodimg.nbh), copy it to your root-folder (fast way for accessing bootloader is to also copy the "EnterBootLoader.exe" -file to your SD-card, and to start that file after copying both the files). Now just enter the bootloader, and it works! (don't be scared when the screen goes black for a moment, and the bootloader has reloaded. It's meant to do that )
Click to expand...
Click to collapse
Much obliged. I've actually been scared off the official vzw 6.5 because of issues upgraders have reported, but someday I'll put that to use.
i thought of re doing doloop's modd for TP2
and here it is fully tested to be working
now we can mtty our TP2 without having the need of MTTY and its drivers
INSTRUCTIONS:
SacTilt said:
Some of you are making this too difficult. I've posted this before, as this is all that needs to be done. Task29 does not remove your radio or your splash screen. It only clears the ROM, therefore, all you need to do is run Task29 and then flash your ROM. This is how I do it from the PC.
Connect to PC via Active Sync/WMDC.
Execute Task 29.
When phone boots to "Touch Pro 2" screen (or whatever your splash screen happens to be), I hold down the volume down button while hitting the reset button.
Once I'm on the Bootloader screen, and it shows "USB", I flash the new ROM from the PC as I normally would.
When the phone vibrates, indicating the ROM upgrade is complete, I disconnect the phone from the computer.
Click to expand...
Click to collapse
DOWNLOAD:
From here
http://valkyrie.htc-files.com/downloads/roms/valkyrie/rhodium/task29.zip
CREDIT:
all credit goes to doloop for coming up with the idea
doloop said:
Hi,
I hex edited RomUpdateUtility.exe so it runs task 29 right after flashing ruu_signed.nbh
As every one understand this command format the rom,
Just unzip and run task29.exe . You may replace ruu_signed.nbh with the radio of your choice.
After the phone reset itself, your old rom will be gone, so it won't boot: binfs has been formated, your phone memory is clean.
You'll need to power up in bootloader mode (press vol down right after power key), then use the leocustomruu.exe provided with your favorite rom package, or flash it from memory card using standard procedure.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=5845908&postcount=1
May I ask what this is used for?
petard said:
May I ask what this is used for?
Click to expand...
Click to collapse
off course
when u flash a rom, you are copying files onto the internal memory (like duh!) but if u repeatadly flash different roms, sometimes files from older version stays behind as when u flash a rom, you just copy and sometimes overwrite files without deleting the older ones. hence at times these older files may create bugs\instability. hardrest donot always fix it.so we use MTTY
read this post to know what made me such a firm fan of mtty.http://forum.xda-developers.com/showpost.php?p=5898010&postcount=6085
but the thing is, mtty is and can be hard to use for new users. ... for me,, i was having the worst time installin the drivers needed to run mtty on win7 x64. so u i made this tool for me and for all
agent_47 said:
- run then ROMUpdateUtility.exe and wait for it to finish.....
Click to expand...
Click to collapse
Nice tool.
Is it possible to run this tool from mSD card, since my phone cannot connect to PC via USB?
bookmarked thanks Badwolve1
Thanks for simplifying this process agent_47. One question, can we do a backup using spb, then use the tool, reflash a rom and restore the backup? Or does the backup cause those possibly bad or corrupt files to be copied back to the device? Just wondering if I can save some time of setting the rom back up
TorbenKB said:
Nice tool.
Is it possible to run this tool from mSD card, since my phone cannot connect to PC via USB?
Click to expand...
Click to collapse
nope....that exe is a win32 app....our device is only a win CE
kwill said:
Thanks for simplifying this process agent_47. One question, can we do a backup using spb, then use the tool, reflash a rom and restore the backup? Or does the backup cause those possibly bad or corrupt files to be copied back to the device? Just wondering if I can save some time of setting the rom back up
Click to expand...
Click to collapse
u can, but i don do that. the max i do is backup some regs. with sooo may different form of wm6.5, i would sta y way from entire system back up....
but to answer ur question, spb backup wont through any bugs related to corrupt file/bad sectoring/mirror files
How to flash new stock HTC ROM after Task 29?
Hey, just wondering how I would flash the new stock HTC rom after task 29, as it is just an exe file with no custom RUU?
Thanks!
mmicha said:
Hey, just wondering how I would flash the new stock HTC rom after task 29, as it is just an exe file with no custom RUU?
Thanks!
Click to expand...
Click to collapse
The EXE is probably just an archive. Open it with your favorite archiving app (7-zip, etc) and you will see the NBH
So I would assume you shouldn't have to hard reset after flashing a rom if you first perform this internal format, correct?
agent_47 said:
nope....that exe is a win32 app....our device is only a win CE
Click to expand...
Click to collapse
I think he means can we just flash the nbh file from sd card instead of using the ROMUpdateUtility through USB.
mmicha said:
Hey, just wondering how I would flash the new stock HTC rom after task 29, as it is just an exe file with no custom RUU?
Thanks!
Click to expand...
Click to collapse
use the custumruu provided with ur rom. eberithing uploaded by me in the archive is only to be used for task29
bjevers said:
So I would assume you shouldn't have to hard reset after flashing a rom if you first perform this internal format, correct?
Click to expand...
Click to collapse
ya....but it wont hurt to do so either
bjevers said:
I think he means can we just flash the nbh file from sd card instead of using the ROMUpdateUtility through USB.
Click to expand...
Click to collapse
either ways, the answer is a no
agent_47 said:
either ways, the answer is a no
Click to expand...
Click to collapse
Ok. Thanks. I need to get the USB plug fixed then..
thanks for this! much faster than reverting to stock rom occasionally to "clean up"
agent_47 said:
u can, but i don do that. the max i do is backup some regs. with sooo may different form of wm6.5, i would sta y way from entire system back up....
but to answer ur question, spb backup wont through any bugs related to corrupt file/bad sectoring/mirror files
Click to expand...
Click to collapse
Thanks much Agent_47. I only use the backup after I completely set up a rom the way I like it. That way I can quickly go back to that same setup if I have to (crashes or whatever the cause may be). ONLY on the same exact rom though, build and chef. And to make sure I understand, spb backup doesnt touch sectors of internal memory anyway (just reg entries and actual files) , so it shouldn't matter using a backup copy after using task29?
weird?
got a problem, i used the Task29 internal memory format tool from agent_47 to clean im internal memory. put the nbh file on a blank 2gb formatted sd card. put the card inside the rhodium, held down the vol down button and powered on, im in the boot loader but it hasnt progressed anywhere? the connection type says serial... any ideas?
when i just power on my phone, they only thing that shows is the ATT world phone image
johng75 said:
weird?
got a problem, i used the Task29 internal memory format tool from agent_47 to clean im internal memory. put the nbh file on a blank 2gb formatted sd card. put the card inside the rhodium, held down the vol down button and powered on, im in the boot loader but it hasnt progressed anywhere? the connection type says serial... any ideas?
Click to expand...
Click to collapse
yes. because ur not reading instructions......(remane nbh)
also if ur nbh is less that 20mb, read post 1 again
sorry, i re-read what i wrote, let me rephrase... after i ran your tool from my computer while connected via usb, it finished and rebooted, i them put my rom nbh file (RHODIMG.nbh, 186mb) on a blank sd card, entered boot loader and thats where i am
[SOLUTION FOUND]
i took out the mSD card, loaded into bootloader, and when i plugged in the USB cable, it changed from serial connection to USB and let me flash from my system... ill poke around in the flashing thread for my mSD card issue...
your tool works great!
Awesome tool! Saves me time. Thanks again!
thank you, works excellent