Hi
how can i increase my memory card facility in the kaiser.Please advice anyone
erm, buy a bigger memory card?
Welcome to the forums, fckblack!
Unless you're extremely handy with a sodering iron & small PCBs, I don't suggest you try to change out the memory chips...
Xtreme_G get's the door prize for the right answer!!! Buy a bigger MicroSD card.
FWIW, thread moved, this has nothing to do with ROM Development.
fckblack said:
Hi
how can i increase my memory card facility in the kaiser.Please advice anyone
Click to expand...
Click to collapse
Here's a stp-by-step instruction on how to do it:
1)Take a good look at your hand set(it's going through a by-pass sugery)
2)Open the memory slot located underneath.
3)Take out the memory card(be very cautious, keep a look on the heart beat monitor)
4)Saw open your brain compartment.
5)Unplug your brain from your spinal chord and put it in the slot and close the door.
brains can have an infinite storage capacity(considering your case, more than infinite). OH I 4GOT THE FINAL STEP: attach the memory card to your spinal chord and close your brain compartment.
hotshot_amer said:
Here's a stp-by-step instruction on how to do it:
1)Take a good look at your hand set(it's going through a by-pass sugery)
2)Open the memory slot located underneath.
3)Take out the memory card(be very cautious, keep a look on the heart beat monitor)
4)Saw open your brain compartment.
5)Unplug your brain from your spinal chord and put it in the slot and close the door.
brains can have an infinite storage capacity(considering your case, more than infinite). OH I 4GOT THE FINAL STEP: attach the memory card to your spinal chord and close your brain compartment.
Click to expand...
Click to collapse
I can see you are no medical person, because it's the wrong order with possible great damage.
Switch 5 and 6: first insert the memory card in the brain otherwise it goes terribly wrong!
(and I'm not British)
maybe these people offer it for other devices too
http://forum.xda-developers.com/showthread.php?t=370480
Related
Dear Friends and Rom Masters,
I am really happy to see that my himalaya can support Windows Mobile 6.5.X but i am suffering from a problem that is my battery. my device is now 5 years old and its battery is half dead. its life is reduced to 50% and i am seeing developments by you all and every day new kitchen and builds are released by sun dream, and aeroflyluby, i am happy to see nokser back.
Coming to the issue. i want to make my himalaya back to life again i want to have a new battery of himalaya, i searched it hard but i cant find any in Pakistan, can any1 help me getting it online or tell me any shop in Karachi, Pakistan because my device is running perfect but i have problem of battery only.
Thanking you all
No 1 here to help me? i need charging cradle and high capacity battery please any1?
you can not, buy a new battery on the web?
No
I havent done online shopping ever and i dont know any reliable good website for himalaya battery and desktop cradle and can ship me to Pakistan
Maybe buy on the ebay.com
the delivery, you must agree with the seller
\\.... Sorry, for my English
Try PDADEN
Contact them if they can deliver to your place.
I did purchase some items from them for my Himalaya.
You need to have credidtcard or paypal.
Try google search for other online store near you.
My Himalaya works perfectly, but sometimes it turn on the screen, and I turn off again and it's turn on again. It's really annoying because it's draw off my battery.
dante05 said:
My Himalaya works perfectly, but sometimes it turn on the screen, and I turn off again and it's turn on again. It's really annoying because it's draw off my battery.
Click to expand...
Click to collapse
Try to turn off with the I/O button, Then twist the cover carefully.
In case the device switches on, it is a little bit dirt between cover an the digitizer/touchscreen. Sometimes it's just the twisted cover.
Try to clean carefully and lock al buttons except On-button.
Good luck
muckelmaus said:
Try to turn off with the I/O button, Then twist the cover carefully.
In case the device switches on, it is a little bit dirt between cover an the digitizer/touchscreen. Sometimes it's just the twisted cover.
Try to clean carefully and lock al buttons except On-button.
Good luck
Click to expand...
Click to collapse
Thank you for helping, but the problem wasn't that. I put a MicroSD adapter in the slot without a microSD card. Stupid ah? I just want to protect from dust.
dante05 said:
Thank you for helping, but the problem wasn't that. I put a MicroSD adapter in the slot without a microSD card. Stupid ah? I just want to protect from dust.
Click to expand...
Click to collapse
Cool, it protected you from long battery live, too!!!
Hello,
I bought a Galaxy Note 1 HS therefore used.
your problem is the SIM card reader is HS broken legs and twisted.
I want to try to weld a new SIM reader slot except that one leg is missing!
Someone there you will knowledges in electronics to guide me.
my idea: remove the black part that looks like a paint to find the way or I could redo electric welding?
I attached the photo.
Thank you.
shaman_Turtle said:
Hello,
I bought a Galaxy Note 1 HS therefore used.
your problem is the SIM card reader is HS broken legs and twisted.
I want to try to weld a new SIM reader slot except that one leg is missing!
Someone there you will knowledges in electronics to guide me.
my idea: remove the black part that looks like a paint to find the way or I could redo electric welding?
I attached the photo.
Thank you.
Click to expand...
Click to collapse
Get it done by a professional if you have never done this before.
And by the way it is called soldering not welding
Sorry for my english. (Google traduction) :crying:
Order a new part online and simply replace it
Sent from my GT-N7000 using Tapatalk 2
it's good I was able to weld and it works.
Hi,
I have unrepairable DROID 3. I would like to unsolder SanDisk SDIN4C2 16GB MLC NAND flash and solder it to a different board removed from working phone, just to get back my data (some are not synced to cloud). Will it work? Or will it fail because of some IMEI/security/data ciphers/serial numbers/hardware revisions?
Thanks for reply!
sniezu
sniezu said:
Hi,
I have unrepairable DROID 3. I would like to unsolder SanDisk SDIN4C2 16GB MLC NAND flash and solder it to a different board removed from working phone, just to get back my data (some are not synced to cloud). Will it work? Or will it fail because of some IMEI/security/data ciphers/serial numbers/hardware revisions?
Thanks for reply!
sniezu
Click to expand...
Click to collapse
Since the internal memory is just a soldered SD card, i think it should be fine, in theory you could even find a 32GB model of that chip and solder it on the board to increase total storage memory, but this is a gamble. The only thing i'm not sure is if the data will get some shock from the unsoldering... if you got the knowledge and the tools, i think it's worth a try!
FrankieDedo said:
The only thing i'm not sure is if the data will get some shock from the unsoldering... if you got the knowledge and the tools, i think it's worth a try!
Click to expand...
Click to collapse
Frankie has a good point - you will need to follow good ESD practices - while the flash is pretty rugged there are other parts on the boards that are not. Use a wrist strap, grounded workstation and soldering iron.
i'll give it a try!
Thanks! I'll give it a try and post results here. I have cheap soldering station (hot air) but i will surely use professional service point somewhere in my city.
nand flash chip is very sensitive to high temperatures.
Unfortunatelly no one wants to take this task. After some research it's found that NAND chips are very sensitive to high temperature. Most probably data will be lost after IR/hot air heating. I'm still searching someone to do this for me.
EDIT: 12.11.2013
Some specialist told me, that there is very high possibility destroying data during soldering - so no one will take this task. But fortunatelly he fixed my old, broken phone.
Hello,
I'm having a strange problem with my newly acquired HTC One 802w (M7_DUG). As you may know, this version has a slot for an external SD Card.
Coming from the Defy I had a 32GB Class 10 Samsung SD Card that I installed on the One. A few days later (always running on stock ROM) I notice that the SD Card is no longer recognized. I then switched to a 4GB Class 4 Kingston SD Card just to see if that one worked well, but no, it also stopped being recognized a few days later. On the last try yesterday I used a 8GB Class 2 nobrand SD Card and today is fried again!
When I try to connect them to the computer they are not recognized (nor I can format them) and the cards are hot as hell! I mean REALLY hot. This obviously does not let me dig further because I unplug them right away. This leads me to believe that there's some kind of short circuit inside the card.
I honestly don't know what to do as obviously I don't want to keep kililng sd cards! Anyone experiecing the same problem?
Here are my specs:
HTC One 802w M7_DUG
ROM MaximusHD 1.0.2 Rooted
Unlocker bootloader
S-ON
EDIT: Solution here
EDIT 2: This seems to apply to BLACK models only. SILVER model seems unaffected from this issue.
No. i use a 64 gb samsung micro sd for 3 month now in my dual. All working fine.
Hi! I have the same problem - one of my SD cards died in 802w... And some other man from our russian forum 4pda also had such problem.
My idea of what happens is that it's just the mechanical damage. There are some projections on the inside of the back cover which are supposed to hold SD and SIM cards in place so they don't slip out of slot (?), but the problem is they're placed too close to the slot's end. So if you close the back cover that projection may press on SD card's end and just cracks it in two pieces.
At least that's what happened with my microSD... First I didn't notice it but then checked and it's really cracked. So this may be an answer - careful people tell that cards work normally, and strong people like us [ ] experience dead cards...
vitalif said:
Hi! I have the same problem - one of my SD cards died in 802w... And some other man from our russian forum 4pda also had such problem.
My idea of what happens is that it's just the mechanical damage. There are some projections on the inside of the back cover which are supposed to hold SD and SIM cards in place so they don't slip out of slot (?), but the problem is they're placed too close to the slot's end. So if you close the back cover that projection may press on SD card's end and just cracks it in two pieces.
At least that's what happened with my microSD... First I didn't notice it but then checked and it's really cracked. So this may be an answer - careful people tell that cards work normally, and strong people like us [ ] experience dead cards...
Click to expand...
Click to collapse
Thank you for your suggestions. I will try with another card and see what happens. I will report back.:good:
SOLUTION!
Well...sorry for the late reply but took me a long time to dig into this.
As @vitalif mentions the SD Cards suffers a mechanical damage. This is due to the pressure received from the protuberance in the removable back cover that should supposedly keep the SD card in place (not needed though as card/SIMS are physically held by the slot, but c'est la vie!)
The first thing I tried is to remove the small dent all Micro SD cards have but these cards are very sensible and the circuitery reaches this place as well, so I ended up ruining a few of them.
The solution I found was to use a dremel to remove that protuberance from the back cover as you can see on the attached photos. This has to be done with patience and probably better to have experience with these tools.
With this method I have been using the same SD Card for the past two months with no problems at all!
very interesting, i use my samsung microsd card from the begining and not damage at all. Maybe only black version have this problem , mine is silver and i open cover almost once per day .
802d in silver here and never faced sd card issue , using it since august.
using silver and no problems for past 5 months.
This seems to be a black edition only problem so far....any silver edition out there with this problem?
Same problem on black 802d model
The phone (black 802d) just broke my Kingston 32Gb microSDHC in half.
The back lid was not laying flat on the back since it was pushing against the sdcard, probably in my pocket, it got squeezed tighter, applying all the pressure via the back-panel extrusion onto the sdcard, which cracked it. Lost all my data
mjollnyr said:
The phone (black 802d) just broke my Kingston 32Gb microSDHC in half.
The back lid was not laying flat on the back since it was pushing against the sdcard, probably in my pocket, it got squeezed tighter, applying all the pressure via the back-panel extrusion onto the sdcard, which cracked it. Lost all my data
Click to expand...
Click to collapse
Yeah, is a pain in the neck. I also lost all my data.
You should try my solution: http://forum.xda-developers.com/showpost.php?p=49903638&postcount=5
So far this seems to be a BLACK edition problem only.
J_M_V_S said:
Yeah, is a pain in the neck. I also lost all my data.
You should try my solution: http://forum.xda-developers.com/showpost.php?p=49903638&postcount=5
So far this seems to be a BLACK edition problem only.
Click to expand...
Click to collapse
I recently bought a new SILVER edition htc one 802d and then i purchased a 32gb sandisk uhs micro sd.
Don't know why it killed the micro sd after 3 weeks, so it appears to be all htc one dual sim problem not the black edition only.
I've looked everywhere all over the internet to see if anyone has experienced this issue with not many answers. A while back my Micro SD slot would not read after a few events that I'm not sure which one may be the cause. I have a 32gb Sandisk Class 10 it works and was the proper format when I had it in the phone, it works fine in other devices and phones but not my phone. One event I had was that my phone got extremely hot one day when I was using it outside on a very hot day. Had to turn it off for a little while. But the other event is that I used the test 4.4.2 one click odin back in august. After those few things my micro sd slot never worked again I flashed to an official 4.4.2 using odin and have root but still not able to see the sd card at all. I want to know what I can do, phone is out of warranty. Is there a software issue or would I have to replace the Micro SD/Sim Slot. Is there anyone that would be able to fix this. Could I just replace the logic board, and If that is the case could I replace the logic /mother board with one from a tmobile phone, unlocked bootloader.
danny6787 said:
I've looked everywhere all over the internet to see if anyone has experienced this issue with not many answers. A while back my Micro SD slot would not read after a few events that I'm not sure which one may be the cause. I have a 32gb Sandisk
Click to expand...
Click to collapse
At least if it's an SD card issue, getting a replacement is as easy as going to http://kb.sandisk.com/app/answers/list/kw/microsd microsdhc/ opening a live chat and asking for one.
Class 10 it works and was the proper format when I had it in the phone, it works fine in other devices and phones but not my phone. One event I had was that my phone got extremely hot one day when I was using it outside on a very hot day. Had to turn it off for a little while. But the other event is that I used the test 4.4.2 one click odin back in august. After those few things my micro sd slot never worked again I flashed to an official 4.4.2 using odin and have root but still not able to see the sd card at all. I want to know what I can do, phone is out of warranty. Is there a software issue
Click to expand...
Click to collapse
Hard to say. Stock 4.4.2 should read the SD card, no matter what was there before. (If my many-times-bricked phone can still read the SD card with almost stock 4.4.2, yours should too.)
or would I have to replace the Micro SD/Sim Slot. Is there anyone that would be able to fix this.
Click to expand...
Click to collapse
It could be the slot. I'd ask around for recommendations where you live. Some shops are great, some just ruin your phone. (I know - I owned a few before I retired. The "techs" who just wanted to start repairing phones, with no training, made "dime a dozen" sound expensive. [Not that I ever hired one. You want to work for me, here's a phone that doesn't work. You have 30 minutes to call me from it.])
Could I just replace the logic board, and If that is the case could I replace the logic /mother board with one from a tmobile phone, unlocked bootloader.
Click to expand...
Click to collapse
Probably. Not "you", though - someone who's opened a cellphone before, at least a few times. One wrong pinched wire and you'll need another motherboard. (The battery has enough power in it, when fully charged, to weld the plastic case to the wooden table - figuratively speaking. Pinch a wire with full battery current available to ground and you'll let all the "magic smoke" out of the phone and it'll stop working.)
...
Well I have opened up a few phones before its not that hard. As far as getting a local shop to swap the slot out that my prove to be a little hard considering were I live the people here are 10 years behind technology. Plus I think it would cost me as much as just buying a new logic board. What I really want is to flash a new rom to my phone I can deal with the 32gb of storage, but everytime I upload a rom and flash it from safestrap my internal memory goes to 0mb available then I have to odin reflash even when I load up via adb, when I restart the phone pass safe strap I just go into a black screen never does anything after that. Right now I'm just running stock 4.4.2 root
Well I think I answered my own question, just bought an OTG cable, I forgot about using a flash drive