Hey guys,
I am having an issue installing TomTom on my L26 v4 rom. I have been able to get it up and running on the standard ATT and Dutty's rom but for some reason when I do it on the L26 v4 rom it just sits there on the install screen and does nothing. When I try the exe file from the computer that loads it via Active Sync I get an error saying "Setup Error: Unable to install application. Please update your device ROM to the required version before trying again."
I tried searching the forums and trying the suggested fixed but still nothing. I tried different cabs and still same result. Any help would be greatly appreciated.
Thanks!
I think you would find more help posting this in the relevant ROM you are talking about.
Flash back to the original WM6 or WM6.1 ROM to see if the problem persist. I will keep the thread open for the time being.
The problem wont happen. When I had L26 ROM I couldnt flash TOMTOM either, re-flashed to a different ROM and no problems
i had no problems installing tomtom on the rom....which is in my sig
bapssystupr3m3 said:
i had no problems installing tomtom on the rom....which is in my sig
Click to expand...
Click to collapse
We are talking about the L26 v4 ROM though not the stock
You're getting nowhere because you've created a new thread when you really should have posted this issue in the thread for the "L26 v4" ROM where others who are running the same will see and possibly respond to it.
I'm going to step on my buddy AllTheWay's toes a little and close this thread.
@ OP, please post your question in the correct thread, you'll get better results.
Related
I am new to completely flashing a custom ROM. I've been trying to flash a new ROM on my tilt, with the latest AT&T updates(ROM 1.62.502.0 Radio 1.27.14.09). Each time I try to flash a custom ROM I get Error 262 Update Error. The progress bar never gets past 0%. I've tried multiple PCs and tried reinstalling ActiveSync. Am I missing something, or do I have to do something first before being able to flash the new ROM?
Any help is greatly appreciated!
Steve
i suggest u read all the wiki's and stickies regarding flashing a custom rom before taking any action...u obviously havent read it or havent got a good understanding of it which is why ur getting this error...and btw..i also suggest u search for solutions rather than just posting a thread like this which can be answered through a brief search of the forums.
I am about 100% sure you searched, didn't you?
Here, baby boy, let me spoon feed you and you can ask your mommy if she can whipe your drool:
http://www.digwin.com/view/schaps-wm6-pro-roms-update-error-262
bapssystupr3m3 said:
i suggest u read all the wiki's and stickies regarding flashing a custom rom before taking any action...u obviously havent read it or havent got a good understanding of it which is why ur getting this error...and btw..i also suggest u search for solutions rather than just posting a thread like this which can be answered through a brief search of the forums.
Click to expand...
Click to collapse
I have searched the forums over the past week or so. The solutions suggested such as soft reset, hard reset, reinstall activesync, switch USB ports, etc have not done anything. I also came across this thread:
http://forum.xda-developers.com/showthread.php?t=370205
which would suggest that I there is an incompatibility. I was hoping someone could point me in the direction of which radio version etc I would need to update to in order to update to a WM 6.1 ROM.
edit:yes I have run CID unlock.
Steve
AT&T 1.62.502.0 w/ 1.27.14.09 radio should flash fine on any Tilt even without CID unlock, since it's signed by AT&T. While I'm glad to hear your phone is CID unlocked, it's still strongly suggested that you flash HardSPL & Security Unlock your device.
Regarding your current issue, have you:
* Tried another computer to flash from?
* Entered tri-color bootloader mode on your phone prior to flashing? You can find out how to on the wiki.
Hope this helps!
_Alex_ said:
AT&T 1.62.502.0 w/ 1.27.14.09 radio should flash fine on any Tilt even without CID unlock, since it's signed by AT&T. While I'm glad to hear your phone is CID unlocked, it's still strongly suggested that you flash HardSPL & Security Unlock your device.
Regarding your current issue, have you:
* Tried another computer to flash from?
* Entered tri-color bootloader mode on your phone prior to flashing? You can find out how to on the wiki.
Hope this helps!
Click to expand...
Click to collapse
Thanks Alex! Tri-Color mode worked!
Steve
My error 262 fixed
I don't know if this is the best place to put this, but I didn't want to open a new thread.
I too had been getting repeated error 262. And I spent a couple of hours searching for answers, and while there have been many questions raised on this subject, there have been few clear solutions (and certainly none that worked for me).
I have the HTC branded Kaiser installing from Vista. (By the way I am new to this, but as I had such a hard time working this out, I thought I should at least post what worked for me.) I unlocked the CID with pof's Hard-spl v1 tool. Then (as I want to stay with Mobile 6.1) I upgraded the hard spl to v3.28 by JockyW. I then downloaded a number of Roms I wanted to try. That is where the trouble started.
Each ROM I tried would get past the tri-color screen with no problem. Then it would hang at the 0% until finally showing the error 262. A soft reset would reload my previous rom unchanged. I tried many things: removing all USB's, firewall, virus protection, hard reset, reboot windows, every suggestion I could find (and understand).
While the hard spl I had should have worked, I thought I should try version 3.29. When trying to upgrade to that I had a similar problem with error 260 this time. Looking over spl update instructions I realized I had forgotten to uncheck "disable usb connections" in "Activesync" at the proper stage. Once that was unchecked, the new spl loaded. After that I was able to load the cooked roms with no problem.
It appears there was something wrong with the HardSPL v3.28 I was using or in how I installed it. The tricolor screen was showing 3.28. In any case, after I reinstalled a new hard spl (this time 3.29), I had no more error 262.
A bit long-winded, but hopefully this might help someone else.
Hello,
I need some help with my HTC Blackstone. After numerous attempts to upgrade my ROM to Miri_WM61_21054_Manila_2.5_V2.1.rar and EnergyROM BLACKSTONE 20090829 StandardM2.5.rar (WM6.5) I succeeded in “breaking” my phone.
My ROM version was 1.56.401 (installed the update from htc.com: RUU_BlackStone_HTC_Europe_1.56.401.0_Radio_52.62.25.34_1.13.25.24_Ship.exe).
First I tried the EnergyROM using the HSPLWrapper_Blackstone_156OliNex.exe and SSPL-Manual-TouchHD.exe but I kept getting the 262 and 260 errors. After I downloaded the Miri_WM61_21054_Manila_2.5_V2.1.rar and also tried with the HSPLWrapper_Blackstone_156OliNex.exe and SSPL-Manual-TouchHD.exe and I kept getting the same errors. Then I had the brilliant idea to try the BlackstoneRUUWrapper.exe that was in the Miri archive. The progress bar went from 0 to 100% in 3sec and then I realized that I did something bad.
Now everything is in green tones on my display but when I turn it off and then back on the colours come back to normal. Also the Windows is working very very hard. I managed to sync it with the PC and install the ROM from HTC website RUU_BlackStone_HTC_Europe_1.56.401.0_Radio_52.62.25.34_1.13.25.24_Ship.exe but I have the same problem.
Can somebody please provide a solution to fix my phone.
Thanks
Read the dummies guide http://forum.xda-developers.com/showthread.php?t=505377
Post anything further in that thread, no need to create new threads.
haqx said:
Hello,
I need some help with my HTC Blackstone. After numerous attempts to upgrade my ROM to Miri_WM61_21054_Manila_2.5_V2.1.rar and EnergyROM BLACKSTONE 20090829 StandardM2.5.rar (WM6.5) I succeeded in “breaking” my phone.
My ROM version was 1.56.401 (installed the update from htc.com: RUU_BlackStone_HTC_Europe_1.56.401.0_Radio_52.62.25.34_1.13.25.24_Ship.exe).
First I tried the EnergyROM using the HSPLWrapper_Blackstone_156OliNex.exe and SSPL-Manual-TouchHD.exe but I kept getting the 262 and 260 errors. After I downloaded the Miri_WM61_21054_Manila_2.5_V2.1.rar and also tried with the HSPLWrapper_Blackstone_156OliNex.exe and SSPL-Manual-TouchHD.exe and I kept getting the same errors. Then I had the brilliant idea to try the BlackstoneRUUWrapper.exe that was in the Miri archive. The progress bar went from 0 to 100% in 3sec and then I realized that I did something bad.
Now everything is in green tones on my display but when I turn it off and then back on the colours come back to normal. Also the Windows is working very very hard. I managed to sync it with the PC and install the ROM from HTC website RUU_BlackStone_HTC_Europe_1.56.401.0_Radio_52.62.25.34_1.13.25.24_Ship.exe but I have the same problem.
Can somebody please provide a solution to fix my phone.
Thanks
Click to expand...
Click to collapse
connect ur phone in active sync mode with ur pc.
then run the HSPL olines wrapper.
ull enter a tricoloured screen which will say 1.56.OLINEX.
disconnect and reconnect ur USB cable.
Run the EXE in the downloaded ROM.
ull be ready with the new rom..
this is assuming u have Win XP. for other OS u need to dnload drivers from the thread mentioned in the above post.
Generally speaking if you are experiencing discolourization it is because your SPL is incorrect.
Check your SPL in bootloader. Then follow this guide. Any future queries regarding flashing should be posted in that thread and myself or others will help you. If no one responds PM me and I'll respond next time I'm online.
Thread closed
Ta
Rick
I have been trying different roms to try to upgrade my phone to WM6.5 and so far the roms I've tried won't even load onto my phone. The download status bar will come up but it goes nowhere then it says update error. The phone will turn back on and work with the stock WM6.1
I'm just looking for a very clean OEM style WM6.5 ROM. Any recommendations?
ryche316 said:
I have been trying different roms to try to upgrade my phone to WM6.5 and so far the roms I've tried won't even load onto my phone. The download status bar will come up but it goes nowhere then it says update error. The phone will turn back on and work with the stock WM6.1
I'm just looking for a very clean OEM style WM6.5 ROM. Any recommendations?
Click to expand...
Click to collapse
Have you read the Dummies Guide? If not, you should do this. Just try some roms to see what fits better to your needs.
Assuming you hardspl or setup for USPL prior to flashing any ROM's. I have the 8285 and run the following ROM's: NRG LEO, PDAVIET LEO, and MIRI's LEO based ROM's. I personally keep going back to NRG as I have followed him from other devices and like his work. All the cooks are great. I also flash from SD card vs. using Activesync, find it faster and more reliable.
NRG is clean and mostly bug free ? yea from what you're saying maybe I did do something wrong. I'm not too advanced on this, I downloaded the energy rom and tried to update it. I've done nothing previous
ryche316 said:
NRG is clean and mostly bug free ? yea from what you're saying maybe I did do something wrong. I'm not too advanced on this, I downloaded the energy rom and tried to update it. I've done nothing previous
Click to expand...
Click to collapse
well then that's why you're having problems for sure. as others have mentioned follow the Dummies Flashing Guide. if you're using HardSPL, make sure the top (RED) section of your bootloader looks like this Pic of Bootloader with HardSPL. when it looks like this, you're ready to flash a ROM!!
OK I found the 156OliNex.zip file. I put the phone into bootloader mode, when I tried to launch the file it would not execute. It flashes up on the screen for a second and that's it. I made sure that the windows firewall is turned off
Best, the least error, safest flashing tool USPL
i highly recommend you use USPL : I still yet have to see someone who had a problem after using USPL. This is even endorsed by Dutty Throy (you can see that he even states that this is the SAFEST METHOD) - Moderator ROM Cooker par excellence!
look here
http://forum.xda-developers.com/showthread.php?t=505377
and here
http://forum.xda-developers.com/showthread.php?t=462347
format your sd card using fat32 (full format) (if you are a frequent flasher I suggest you get a small capacity sd card – 1Gb - and devote this only for flashing)
rename the RUU_signed.nbh to BLACIMG.nbh and pair this with ROMUpdateUtility -(application file). copy this two files in you formatted sd card.
then using Digital Outcast's USPL GUI: look here
http://forum.xda-developers.com/showthread.php?t=508361
if you're using Vista see this to update your sync driver
http://www.modaco.com/content/windo...u-on-vista-it-can-be-done-the-ultimate-guide/
flash the ROM.
please let me know once you've done this succesfully, i wish you the best of luck!
ryche316 said:
I have been trying different roms to try to upgrade my phone to WM6.5 and so far the roms I've tried won't even load onto my phone. The download status bar will come up but it goes nowhere then it says update error. The phone will turn back on and work with the stock WM6.1
I'm just looking for a very clean OEM style WM6.5 ROM. Any recommendations?
Click to expand...
Click to collapse
You need to start posting in the Dummies Flashing Guide as posted above as this thread will be closed as soon as a mod comes across it. You'll find all your answers and help there
ryche316 said:
OK I found the 156OliNex.zip file. I put the phone into bootloader mode, when I tried to launch the file it would not execute. It flashes up on the screen for a second and that's it. I made sure that the windows firewall is turned off
Click to expand...
Click to collapse
do you have .Net installed on your PC? if not, you need to install first. if you have .Net installed, retrace your steps to make sure you've got everything setup properly, e.g., installing the driver supplied in the thread. also, if you have problems please post your questions in the Dummies thread...the moderators will close threads like this one because "all" the info you need to flash can be accessed from the Dummies thread.
yes I have NET installed on my computer. I tried using the files in the dummies guide and had issues
OK. so I finally got the NRG energy rom installed and it shows up distorted on the screen.
ryche316 said:
OK. so I finally got the NRG energy rom installed and it shows up distorted on the screen.
Click to expand...
Click to collapse
if you're using a WM 6.5 ROM then you do not have the right SPL installed.... look at Post #5 and make sure your bootloader looks like the one in my picture; if it doesn't then you haven't installed SPL 1.56 Olinex. again, please post your questions in the Dummies thread, you'll get appropriate help there... thanks!
I want to thank everyone for their input. I finally got a rom installed and working properly
I just wanted to thank everyone for their ideas and input. I finally got a rom installed and working on my phone
glad to know you were successful! we've all been there before and i know it can be frustrating. patience, diligence and patience (lol) will get you there!
Solution found, thread closed
For those who have not checked this out, there is a new ROM available on HTC website>India.
http://www.htc.com/in/SupportViewNews.aspx?dl_id=698&news_id=281
More details click on the above link...
ENJOY !!!
Downloading it now...will update about my experience with it !
EDIT: Faced an error while installing it....posted the details below...CAN ANYONE GUIDE ME HOW TO UPGRADE ROM PROPERLY
can anyone upload to rapidshare?
already posted 2 days back...
check here
http://forum.xda-developers.com/showthread.php?t=566483&page=3
Yes ! can you give a miror ?
http://rapidshare.com/files/2879222...9.707.0_Radio_52.62.25.34_1.13.25.24_Ship.exe
Hi!!! Has anyone tried to upgrade the ROm as yet... Well I have tried and failed. I have HSPL 1.56 Olinex installed and have searched through the WIKI entirely but not gotten anywhere...
The thing is that wen i connect the phone and try to install the ROM, it goes into Bootloader and I get error 202 [Connection error]
I have searched the wiki, but for that error msg, it only says connect the device againa and make sure activesync is enabled...well i have already ensured all the things mentioned but still facing the same issue...PLZ HELP !!!!
blitzkrieg7710 said:
Hi!!! Has anyone tried to upgrade the ROm as yet... Well I have tried and failed. I have HSPL 1.56 Olinex installed and have searched through the WIKI entirely but not gotten anywhere...
The thing is that wen i connect the phone and try to install the ROM, it goes into Bootloader and I get error 202 [Connection error]
I have searched the wiki, but for that error msg, it only says connect the device againa and make sure activesync is enabled...well i have already ensured all the things mentioned but still facing the same issue...PLZ HELP !!!!
Click to expand...
Click to collapse
read carefully this topic.it really helps you.upgrade your hd through uspl 2.5 version.
link
http://forum.xda-developers.com/showthread.php?t=462347
No idea why HTC is releasing this rom now "OFFICIALLY" as they.
The rom date says 17th April, 2009 and this was available at http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Ship_exe if I'm not wrong.
jatinder said:
read carefully this topic.it really helps you.upgrade your hd through uspl 2.5 version.
link
http://forum.xda-developers.com/showthread.php?t=462347
Click to expand...
Click to collapse
Hi ! Thx for the response, although could anyone tell me whether I can flash another rom even if I have HSPL 1.56 installed and overwrite it with USPL???? or how as I have read the thread mentioned int the above post and it still keeps pointing me towards installing USPL...can smone throw sm more light on this???
USPL Cannot be installed on your phone!!!
blitzkrieg7710 said:
Hi ! Thx for the response, although could anyone tell me whether I can flash another rom even if I have HSPL 1.56 installed and overwrite it with USPL???? or how as I have read the thread mentioned int the above post and it still keeps pointing me towards installing USPL...can smone throw sm more light on this???
Click to expand...
Click to collapse
Uspl is not something you flash on to your phone like the hardspl, it is executed in your windows operating system of your personal computer, it is like a medium which allows to flash unsigned ROMs on to the HTC blackstone a.k.a HTC Touch HD from your computer. If you are using Windows Vista or Windows 7 be sure to downgrade your drivers and disable the driver signature enforcement in vista and Windows 7 and yes you can flash other ROMs by using Uspl even if you have hardspl on your device because it will not overwrite yout Hardspl. Try searching and reading through the forum for the answers. i hope i have shed enough light for you to pass through your problem. have fun flashing. enjoy
After flashing radio 1.27 I can't get Snapvue working again.
Reinstalling Vista didn't help. Even the sound doesn't work in Vista.
Ecshift and mmty don't help to reset the system.
Can't get SoftSPL installed.
somebody any idea?
Did you HardSPL before you flashed the radio?
Re-installing Vista wont help with the WinMo side.
what threads did you read ? What exactly did you try
Before people are going to put in the effort, please help us help you..
Which threads on this forum have you read about this problem ?
And what actions (eg command sequences) did you try to get
your shift working again?
---
My best bet is that you should use ECshift.exe /bl to get to the bootloader,
then flash ThaiHugo's radio and then his ROM. Should work.
P.S. forget Vista on your Shift, really if you can afford it, use Windows 7 ultimate and use SD card for "readyboost"
lucid said:
Before people are going to put in the effort, please help us help you..
Which threads on this forum have you read about this problem ?
And what actions (eg command sequences) did you try to get
your shift working again?
---
My best bet is that you should use ECshift.exe /bl to get to the bootloader,
then flash ThaiHugo's radio and then his ROM. Should work.
P.S. forget Vista on your Shift, really if you can afford it, use Windows 7 ultimate and use SD card for "readyboost"
Click to expand...
Click to collapse
Thx for helping me with this item.
I had a good working gullum rom with wm 6.5
then the phoneconnection couldn't anylonger be established.
so I flashed radio 1.27
since then I have a black screen..
I went to all the proposals given in the threads about black screen in snapvue.
Didn't first knew that installing Vista aknew didn't help me on the WM side.
Know it by now, since a few weeks ago.
Have installed both Vista and Windows 7
Both do have soundproblems.
Flashed after your proposal yesterday
- ShifthardSPLfinal
- radio 1.27 rad
- the light rom
No working screen.
Should I still try another radio?
Which one? Could you give me a linl?
HardSPLed again.
had a look with mtty info 2
It was!
Flashed radio.
Then thaihugo's ROM Full.
Black!
Is there another way to reset SNAPVUE? Or have a look inside to "see what is wrong"?