Diamond Bluetooth Problems - Touch Diamond, MDA Compact IV General

I have HBH-DS970 bluetooth headset and it works only as a2dp device with my Diamond. I can only hear music, bluetooth doesnt work answering or hearing calls..any ideas?

I have exactly the opposite problem with my Omiz

Related

**HELP!** Problem with SE DS980 Music Streaming with TyTN II

Hi guys,
I have experienced a nagging issue with my SonyEricsson DS980 bluetooth headset.
Here goes: Cyberon Voice Command, A2DP and AVRCP works flawlessly but once a call is initiated, thereafter during or after the call, the DS980 disconnects itself. I have to manually connect the bluetooth headset to the TyTN II again to re-establish the music streaming (A2DP).
I have done several hard resets and also tried A2DPfix, Kaiser Tweak (Changing bluetooth quality to low) and also Jetware Bluetooth Extension with the supposed plugins, but to no avail...
Can someone help?
Can any registry hack / software help?
I have tried some tweaking with the BitPool and MaxSupportedBitPool but still din't work for me.
http://forum.xda-developers.com/showthread.php?t=352297&highlight=headset+disconnects
let's move this problem to one thread
caulirick said:
Hi guys,
Here goes: Cyberon Voice Command, A2DP and AVRCP works flawlessly but once a call is initiated, thereafter during or after the call, the DS980 disconnects itself. I have to manually connect the bluetooth headset to the TyTN II again to re-establish the music streaming (A2DP).
Click to expand...
Click to collapse
I also have a DS980 BT and same **** happens with me.
Last time my HTC music played crashed and all I could do was a soft reset Have tried different settings with no success.
If I'm not using the player then DS980 seems to disconnect after a call, at least the BT icon is gone.
However, when next call is received/initialized BT icon appears again and headset is connected.
Don't remember if it's still there after second call though.
Same problems I have too...
But my DS980 performs intermittently. Sometimes when a call comes in during playback, it flawlessly switches to the phone call, and then switches back to music after the call ends... However, this only lasts for a little while, and then it reverts back to the usual fault (headset disconnecting after a call and music plays through the device's speakers).
Sounds really silly... wonder what is causing it...
Please, is there someone here that can help us out? Must be some Bluetooth tweak that allows the device to rediscover the headset after a call....

Another bluetooth issue Tytn II and BT8040

I am using Tytn II with Jabra BT8040. I was facing very tricky issue and that was whenever BT headset is connected to the phone, sound profiles on the phone kept on changing.
I have now established that this happens only when I have used both Wireless stereo and Handsfree profiles from my BT headt set. If I only use handsfree problem disappears.
Can some one help to understand whay this may be happening? how to resolve?
The 8040 is A2DP enabled. Basically, a mono stereo headset if that makes sense. Since it can stream music to the BT without using the BT Toggle app. Anyway...its because of your headset. Change it to default using Handsfree..not both.
VooDoo1 said:
The 8040 is A2DP enabled. Basically, a mono stereo headset if that makes sense. Since it can stream music to the BT without using the BT Toggle app. Anyway...its because of your headset. Change it to default using Handsfree..not both.
Click to expand...
Click to collapse
I know what A2DP is and I guess Tytn II supports A2DP and hence the quesry in the first place. I bought BT8040 because TyTn II supports A2DP

Bluecasting only when sound

I'm using my Touch Diamond with TomTom in my car. Also I have a Nokia CK-7W carkit which I'm using with my Touch Diamond without any problems. When I get called, the radio switches to mute (*Telephone*) and I can hear the phonecall through the carkit speaker.
What I want now doesn't seem to work however. I'm using the program BTaudio to bluecast any sound that comes from my Touch Diamond to the Nokia CK-7W carkit. This works: When I enable BTaudio, sound is being redirected through my carkit, so any sounds from TomTom (or my TD mp3 player) is being played through this carkit speaker. The problem however: It is continuously claiming the speaker, even when there is no sounds. So when TomTom isn't talking, I still get the radio muted (*Telephone*), but no sounds from the carkit speaker (obviously).
I would like the radio to mute only there is sound coming from my Touch Diamond, so I can continue to use the car-radio for my normal music. I know the carkit has this option, with my previous Nokia 6230 the radio muted when I was dialing a number, to hear the dailtone through the carkit speaker. Also, the normal carkit function is working properly: It only mutes the car radio when there is an incoming or outgoing call, enabling the car radio to play music when there isn't any calling.
So in short: I would like BTaudio (or any other program) to only bluecast when there is actual sound coming from the Touch Diamond, otherwise I would like to hear the car-radio. Is there any way in realizing this? I heard from another person who also uses BTaudio and the Touch Diamond that doesn't has any problem with this on his Parrot carkit, it works the way I (and he) wants it to work.
I hope I'm making sense to all of you, because I would really like this 'issue' solved! Thanks in advance for any tips or suggestions!
Sorry for kicking this post, but I would really like TomTom to work properly with my carkit, so if anyone has any suggestion I would gladly hear them!
Did you find a solution?

Reroute sound to bluetooth mic?

So, I've been trying to use my BT headset and a voice recorder but Diamonds seems to use only its internal microphone and not BT's one. Jabra BT 3030 (dogtag) is the device I'm using. There are wireless stereo and handsfree profiles in BT settings which are both checked.
Why I can't record my voice with Jabra? Is there a software way to make it use Jabra's microphone?
Apart from this everything else (calls and streaming music) works fine.
No ideas? Anybody? I sent the problem to Jabra/HTC support but didn't get nothing concrete as an answer.
I can't believe that bluetooth device's microphone can't be used for recording?
The same thing worked on Symbian Nokia device I used before...
The answer...
is VJVolubilis
http://www.vijay555.com/?Releases:VJVolubilis
I tried it to make it possible to talk with voiceclips in the live messenger, trough the headset, works perfectly. Axel

EverE T909s stereo bluetooth handsfree and HD2

I just wanted to buy a stereo bluetooth handsfree for my device and finally I decided to buy an EverE T909s about 40 $...
it pairs correctly and fully to the device and music sound is good... but when there is an incoming call or when i call some one its microphone is so weak and people cant hear me!
I just paired the headset to another phone but it worked properly...
any solution?
I have the same problem. But in my case people can hear me when T909S is connected to the phone (Samsung), not very good, but they can.
What I'm concerned is when I connect this headset to my computer and try to use it for Skype, whatever settings I use the sound from Microphone is always very squeaking and it's impossible to use this headset as my headphones in Skype...
Any solutions?

Categories

Resources