umm sry guys if i am screaming and with possible OT but its kinda urgent for me..
kk heres the story, i live in croatia in Europe.. i got my ppc cingular 8125 from ebay like 9 months ago and it was working fine... than one month ago the touchsreen would disalign, and than it went totally off... I sent it to the service here but they were unable to locate the proper error... they told they r quite sure the display controller went dead...
so, I am willing to send it in USA to a decent service... i got a friend in florida which could manage this, so I ask u plz if u know any decent service which could be able to fix this problem... and for cheapest price if possible, cos guys here told me a new screen would cost around 200$ which is too much (i think... since for few more hundres dollars i can get a new one)... so plz, can u suggest me any good service at florida or near there?
thx guys
hf&gl
ps- will there be any problem, since i modded ppc with that antenna aluminium foil + the speaker gum (the one which is stick on them) is missing? I had no guarantee when i got it from ebay, of course..
im not sure of the price but im pretty sure there's instructions somewhere explaining how to open up the wizard and replace the screen. It sounds like all you'll need is a new touchscreen, which i thought was under $100. That is of course if you're willing to do it yourself.
Im sorry i cant help, but im going to bump this just so someone who does know can help you.
yea, i thought the same... on ebay there r touchscreens for cpl of bucks... but what if the problem isnt in touchscreen? could it be maybe that the whole LCD+touchscreen is dead? I have to say i can't see any bad pixel on lcd display, he is workign fine... but what if...
any suggestions? could it really be that just the touchscreen is dead?
uwashock said:
umm sry guys if i am screaming and with possible OT but its kinda urgent for me..
kk heres the story, i live in croatia in Europe.. i got my ppc cingular 8125 from ebay like 9 months ago and it was working fine... than one month ago the touchsreen would disalign, and than it went totally off... I sent it to the service here but they were unable to locate the proper error... they told they r quite sure the display controller went dead...
so, I am willing to send it in USA to a decent service... i got a friend in florida which could manage this, so I ask u plz if u know any decent service which could be able to fix this problem... and for cheapest price if possible, cos guys here told me a new screen would cost around 200$ which is too much (i think... since for few more hundres dollars i can get a new one)... so plz, can u suggest me any good service at florida or near there?
thx guys
hf&gl
ps- will there be any problem, since i modded ppc with that antenna aluminium foil + the speaker gum (the one which is stick on them) is missing? I had no guarantee when i got it from ebay, of course..
Click to expand...
Click to collapse
My screen just start to disalign a couple a weeks ago...
I just hope this does not mean that i will loose it...
any luck uwashock?
duh? luck what? no, i still dont know what to do... i dont want to **** up ppc by myself when changing screen... i dont know wot to do...
crap..
repair shops
if ur in florida ( idk what part), try looking for a cingular repair shop, i know t-mobile has one for its phones and things like that, i think its somewhere in clearwater, i always see it advertised on those beepers and phones ads.
here are some links that I found
http://www.cellrepair.us/services_cell_phone _repair.html
http://www.cell-phone-repair.com/
good luck, i might be having the same issuse sood
and, of course, google is your friend
I killed my Kaiser by flashing a Touch Diamond ROM to it.
Sent it to repair service and they say the Mainboard needs to be replaced,but the price for repair is ultragious .
I realy need the device,it was a big help in my confused life style.
Can anyone tell me how can i fix it myself. Or where i can buy a mainboard. Or where can i send the device to repair for a cheaper service?
Sorry i have started a new thread,but i think this is a serious matter,cause HTC TyTN II is not a toy"I know i done to it the same as to a toy" and its expensive. Please help.
Thanks in advance for all your help guys.
(Solved)
why would you flash a touch diamond rom when your device is a kaiser?
CraZyLiLbOy said:
why would you flash a touch diamond rom when your device is a kaiser?
Click to expand...
Click to collapse
Duhhhhh.....'cause he wanted to kill his device!
sherpa said:
Duhhhhh.....'cause he wanted to kill his device!
Click to expand...
Click to collapse
lol....................
Blueangel69 said:
I killed my Kaiser by flashing a Touch Diamond ROM to it.
Sent it to repair service and they say the Mainboard needs to be replaced,but the price for repair is ultragious .
I realy need the device,it was a big help in my confused life style.
Can anyone tell me how can i fix it myself. Or where i can buy a mainboard. Or where can i send the device to repair for a cheaper service?
Sorry i have started a new thread,but i think this is a serious matter,cause HTC TyTN II is not a toy"I know i done to it the same as to a toy" and its expensive. Please help.
Thanks in advance for all your help guys.
Click to expand...
Click to collapse
Touch diamond isn't all that great. It's lyk a Nokia platform on a PDA, why'd u flash it to a kaiser anyway ?!
About the raw materials, you can easily get the main board (for cheep) through any cellphone spareparts shop online through google . As far as repair is concerned, its as easy as performing a hardware upgrade for your pc; un-plug--> plug. If you're still scared, you can google for a stp by stp instructions.
Blueangel69 said:
I killed my Kaiser by flashing a Touch Diamond ROM to it.
Sent it to repair service and they say the Mainboard needs to be replaced,but the price for repair is ultragious .
I realy need the device,it was a big help in my confused life style.
Can anyone tell me how can i fix it myself. Or where i can buy a mainboard. Or where can i send the device to repair for a cheaper service?
Sorry i have started a new thread,but i think this is a serious matter,cause HTC TyTN II is not a toy"I know i done to it the same as to a toy" and its expensive. Please help.
Thanks in advance for all your help guys.
Click to expand...
Click to collapse
your not the only one with a confused life style
Not dead,just sleeping
_Alex_ said:
As for where to purchase parts, I'd normally tell you to go here: http://www.pocketpctechs.com/main~unit~HTC_TyTN_II-972~area~home.htm but they don't have motherboards.
Your best bet might be to buy something from eBay with a cracked screen, because the motherboard, cpu & chipset is usually the most expensive part, and if you fry that it's usually easier to just buy new...
Hope this helps!
Click to expand...
Click to collapse
Thankx Alex.
I knew that wise words and advice would come out of the inner you.
I went to Mike Channon Home Page and left a message there,im still waiting for a reply.
I will go get the Device from the repair shop tomorrow. Ididnt accepted the price.
I will try and fix it myself,as i have the hability to fix Electronic things as PCs,Laptops,Mobiles etc,thank GOD.
Im low on economic status,but i will try Ebay my friend.
First Kitchen i used was the one with all your OEM Packages. So i love your work.
Hope you keep up in the good path of life .
For some of the others, should ignore any inconscient reply.
Of course i didn wanted to kill my Device. I just cooked HTC Touch Diamond ROM in a Kaiser Kitchen,added some Apps from the ROM i cooked based on C. Stu ROM to make it more colorfull,more alive to our eyes. But it went wrong,and if Man doesnt commited mistakes,so there wouldnt be positive results. Test we need. Mistakes have to occur in order to get better things.
People in Ethiopia have a more confused life than me. Im not an egocentric person, but cool .
I always learned things the hard way .
While I changed my screen I broke the keyboard connector on the mainboard. The brown plastic closing mechanism broke to parts. Any clue where I could buy a new one and if it is possible to change it (solder?)?
CraZyLiLbOy said:
why would you flash a touch diamond rom when your device is a kaiser?
Click to expand...
Click to collapse
he cooked the rom first ... and i'm guessing something didn't go right. OFCOURSE he just didn't straight flash a diamond rom .. he's a cook so i think he knows better than that.
The only thing I can say you:
Great Avatar......
There is always a Solution
raccna said:
While I changed my screen I broke the keyboard connector on the mainboard. The brown plastic closing mechanism broke to parts. Any clue where I could buy a new one and if it is possible to change it (solder?)?
Click to expand...
Click to collapse
Im sorry for what append to you device. It doesnt make us feel good.
What did realy append ?
What part do you need ?
I have the solution for that. If you need a new Mainboard i can get it for you.
I dont make crazy prices. Probably a new device for the price of a Mainboard,thats what ive done,but im searching for a Mainboard supplier thought .
If you want to know more PM me.
Hi Thesire
thesire said:
he cooked the rom first ... and i'm guessing something didn't go right. OFCOURSE he just didn't straight flash a diamond rom .. he's a cook so i think he knows better than that.
Click to expand...
Click to collapse
Nope,i didnt straight flashed a Diamond Rom.
I knew i had to cook it. But forgot that i had to Port XIP and probably SYS from a Kaiser ROM to the Diamond one, or the reverse.
Im still on the learning process. But as you must know,Time is the Master.
And learning and take actions till they come correct its a bit time consuming. And i dont have much time these days.
I learned the hard way. I believe thats one thing that will never appen again .
Im waiting for my new Kaiser to arrive. Couldnt find a Mainboard supplier yet.
But i can get Kaisers for less then the price they asked me in the repair shop.
ok so im having touch withdraws.. and im wondering if anyone has seen a good deal on a SPRINT touch.. im looking for under 100 closer to maybe 50.. kinda broke at the moment.. or if your selling one. thank you in advance
you are in luck, i have an extra vogue in my office at home that i would be willing to sell to another member of the community. $56 shipped to you.
jadenj5 said:
ok so im having touch withdraws.. and im wondering if anyone has seen a good deal on a SPRINT touch.. im looking for under 100 closer to maybe 50.. kinda broke at the moment.. or if your selling one. thank you in advance
Click to expand...
Click to collapse
Plenty of Sprint Touch handsets available on e-Bay for $70-80, and in many cases you can get one for closer to $50-60.
Ive been looking everywhere i can but looking for a battery cover for my hd7. Somehow my girlfriend broke hers and hopping someone may know of somewhere. Im located in the US.
Thanks!
billyarison said:
Ive been looking everywhere i can but looking for a battery cover for my hd7. Somehow my girlfriend broke hers and hopping someone may know of somewhere. Im located in the US.
Thanks!
Click to expand...
Click to collapse
http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=205845
Hi guys,
I would like to buy new screen since mine is totally broken. Tried online couldnt find any trusted used or new one.
Would anyone leed us to good place ?
Br
where you from?