[REF][UPDATED 09/08]List of Diamond Tweaks - Touch Diamond, MDA Compact IV General

This is a summary of Diamond tweaks collected from various threads on XDA and from people's contributions. Thanks to all who discovered the Tweaks (not mentioning by name because there's too many to mention and all I did is aggregate). This is a collective effort so let's keep the list growing!
thread. Let's keep the comments in the Warning: Be sure you know what you're doing and read around the Diamond forums to see where others have run into trouble and with which tweaks on which ROMs. Many people have had to Hard Reset their devices while others have had no problems so read up!
1. Boost TFL3D Performance --> Using Advanced Config, change File system cache to 8mb and file system filter cache to 131072
2. Boost TFL3D Performance --> HKLM\System\Storagemanager\Fatfs and change key Cachesize from 16384 to 32768
3. Wake Up on New SMS --> HKLM\Drivers\BuiltIn\RIL : DisableSMSWakeUpEvent <-- set to "1" by default. Change value to "0"
4. Switch Mute Call on phone flipped face down: HKLM\Software\HTC\PHONE : FaceDownMuteRing: change value to "1" (FIXED: thanks KuKuRiKu and everyone)
5. Change CallWaiting Tone --> HKLM\Software\HTC\PHONE : by default set to \windows\waitingtone.wav by default. change to anything else
6. Boost TFL3D Scrolling Speed --> - HKLM\SYSTEM\GDI\GLYPHCACHE\limit = 16384 or 32768 (DWORD decimal)
- To change it back to the default: - HKLM\SYSTEM\GDI\GLYPHCACHE\limit = 8192 (DWORD decimal)
7. To do a Hard Reset, with the phone ON, hold down the Volume Down and Enter (round navigation) keys and press soft reset while they are pressed
8. Prevent screen switching off during phone call --> HKEY_Local_Machine\Drivers\BuiltIn\RIL\EnableFastDormantDisplayDuringCall to 0 (Note: does not work on all ROMs)
AND (tested and works on EU ROMs thanks to Rod65)
HKCU\ControlPanel\Phone\Sleep switch value from 1 to 0
9. Downlod original CONTENT folder (Wallpaper, VIDEO, MUSIC) here http://rapidshare.com/files/121271047/CONTENT_Internal_storage.rar.html
10. Set HTC Album X button to close not minimize:ok_minimize change value to 0
11. Disable Enlarged Title bar (when you click on a notification) to the default WM behavior: HKLM->Software->HTC->EnlargeTitleBar - and change "Enable" from 1 to 0.
12. Turn off startup aninmation and sound: HKEY_Local_Machine\Software\HTC\HTCAnimation\ -> rename both "StartupGif" and "StartupWav" to other names
13. Enable GPS photo: HKEY_LOCAL_MACHINE\SOFTWARE\HTC\Camera\P10 -> change the value "enabled" from 0 to 1
15. Another supposed TFL3D tweak for better performance: HKLM\Software\OEM\TFLOSettings:
SpeedHigh: default value (25) <-- Change to (5) / SpeedLow : default value (70) <-- Chnge to (14) save and soft reset
16. Adjust screen sensitivity: HKEY_LOCAL_MACHINE\Drivers\TouchPanel
Value = PressureThreshold
Change from the default dword:00000027 or 34 to dword:000000f0 or 240 in decimal
17. Lightsensor Switching the Screen off- realised by yelitterulez, confirmed by pietrucci and tested by myself. When making a call the screen stays on if you leave the phone lying flat on a table. If you wait 10 seconds into the call, you can pick it up to your ear and the screen stays on.
BUT if you make a call with the phone slightly tilted/ slanted (you get the idea), the screen turns off as soon as the call gets connected!
The moment you hold the phone to your head the blacklight turns off. In fact: the moment you hide the screen with anything it turns off! (try your hand...).
This might be the reason why everybody's complaining about the screen turning off during a call: you hold the phone to your head! When you turn the screen back on manually, it stays on no matter if you hold your hand or head...
18. Automatically lock your Diamond --> HKEY_CURRENT_USER\ControlPanel\BackLight\AutoDevic eLockEnable from 0 to 1 and everytime your backlight goes off the device is locked
19. More Camera Modes:
To Enable 'Burst': HKEY_LOCAL_MACHINE\SOFTWARE\HTC\Camera\P6 -> change the value "enabled" from 0 to 1
To Enable 'Sport': HKEY_LOCAL_MACHINE\SOFTWARE\HTC\Camera\P8 -> change the value "enabled" from 0 to 1
To Enable 'Video Share': HKEY_LOCAL_MACHINE\SOFTWARE\HTC\Camera\P9 -> change the value "enabled" from 0 to 1
20. Delay device autolock: HKEY_CURRENT_USER\ControlPanel\BackLight\AutoDeviceLockTimeout -> Change the Dword value (30 = 30 seconds, etc)
21. Enable Manual Screen Rotation (Portrait/Landscape): HKLM - System - GDI - Rotation - HideOrientationUI (change from 1 to 0)
22. Hide SIM Contacts: HKCU\ControlPanel\Phone - create a new DWORD value named "ShowSim" and set it to 0
23. Show Weekday in TFL3D (thanks to pulp) - download and install http://rapidshare.com/files/127174792/weekday.cab
24. Enable HSUPA:
HKLM\Software\HTC\AdvancedNetwork\SupportHSUPA =change it to 1
25. Enable Audio Booster without headset-->HKLM/System/State/Hardware/Headset set the value to 1 (soft reset will bring it back to 0)
26. Add a Call History tab to TF3D (discovered by sushilange, spread by Fabliv) --> http://forum.xda-developers.com/showthread.php?t=410180
27. Add new Cities to TF3D http://forum.xda-developers.com/showthread.php?t=408918 - thanks to R. DevilR
28. Remove orphan icons and shortcuts - http://forum.xda-developers.com/showpost.php?p=2461697&postcount=3
29. Four icons in a row in WM Programs/Settings screens - http://forum.xda-developers.com/showpost.php?p=2462244&postcount=16
30. Remove Vertical and Horizontal Scrollbars
For the horizontal (bottom) scrollbar:
HKLM\System\GWE\cyHScr = 0 (DWORD decimal)
For the vertical (right) scrollbar:
HKLM\System\GWE\cxVScr = 0 (DWORD decimal)
31. Remap Manila softkeys:
HKLM/Software/HTC/manila/
HomeLSKPath, which is the left softkey (Standard = Phonepad)
And
HomeRSKPath, which is the right softkey.
If you change these with the location of the programs you want to link to, and simultaneous change the names:
HomeLSKText = Left softkey text
And
HomeRSKText = Right softkey text.
HKEY_LOCAL_MACHINE\Software\HTC\HTCAlbum :
32. Change system and context menu font size:
HKEY_LOCAL_MACHINE\system\gwe\menu\popfnt
and change the value for the "Ht" entry to "1000" decimal (from 1200)
33. Increase maximum picture size when shooting in Burst and Sports mode:When activating "burst" and "sport" the max size of the pictures is "L" but if you change:
HKLM\SOFTWARE\HTC\Camera\P8\MainCamCaptSize value to 1024
and
HKLM\SOFTWARE\HTC\Camera\P8\MainCamSupportCaptSize to 1744Do the same for P6 and you can now shoot in these modes up to 3M and not just L - thanks to nnevynn for
34. Get Blackberry Connect working on your Diamond!! (thanks to cybertech99)
http://rapidshare.com/files/114522380/BBConnect_WM6_Profession.cab
35. Disable Diamond Phonepad Skin
HKLM -> Security -> Phone -> Skin -> Enable (set 1 to 0), then reset.
36. Enable Better Power Management
HKLM\Drivers\SDCARD\ClientDrivers\Class\SIM_Class
Set DisablePowerManagement = 0 (default=1)
HKLM\Drivers\SDCARD\ClientDrivers\Class\MMC_Class
Set DisablePowerManagement = 0 (default=1)
HKLM\Drivers\SDCARD\ClientDrivers\Class\NAND_Class
Set DisablePowerManagement = 0 (default=1)

nice one on the sms wake. We should expand the list! THanks!
Update:
Thanks for updating the list!
Since I don't see a tweak for Disabling SMS Conversation (The costly SMS Chat) I will post it here!
Disable SMS Conversation in WM 6.X
In Registry Editor: Create a folder named "OEM" in "HKEY_CURRENT_USER\Software\Microsoft\Inbox\Settings"
In the new "OEM" folder, make a new DWORD key called "SMSInboxThreadingDisabled" and give it a value of "1"
That will disable the SMS conversation. When you click on the messages on the SMS tab on TF3D, it will take you to the normal SMS inbox instead.
Hope it helps

thanks a lot, keep going please

Great!
This is very useful and it helps solve a lot of problem. Will the cache size change make the D unstable?

For some they say it has...but for me, my device is running great!

mkhattab said:
This is a summary of the proven tweaks taken from the Diamond Tweaks thread. Let's keep the comments in the Diamond Tweaks thread and keep this one as a list of the actual tweaks only to be an easily accessible summary. Thanks to all who discovered the Tweaks
1. Boost TFL3D Performance --> Using Advanced Config, change File system cache to 8mb and file system filter cache to 131072
2. Boost TFL3D Performance --> HKLM\System\Storagemanager\Fatfs and change key Cachesize from 16384 to 32768
3. Wake Up on New SMS --> HKLM\Drivers\BuiltIn\RIL : DisableSMSWakeUpEvent <-- set to "1" by default. Change value to "0"
4. Switch Mute Call on phone flipped face down: HKLM\Software\HTC\PHONE : FaceDownMuteRing: change value to "0"
5. Change CallWaiting Tone --> HKLM\Software\HTC\PHONE : by default set to \windows\waitingtone.wav by default. change to anything else
Click to expand...
Click to collapse
I have had a real issue with number 2, I had to do a hard reset after changing the Cachesize to 32768. During startup the device hanged and wouldn't load up the touch flow, nothing worked.

saveferris said:
I have had a real issue with number 2, I had to do a hard reset after changing the Cachesize to 32768. During startup the device hanged and wouldn't load up the touch flow, nothing worked.
Click to expand...
Click to collapse
I had the exact same problem, wouldn't recommend this one.

saveferris said:
I have had a real issue with number 2, I had to do a hard reset after changing the Cachesize to 32768. During startup the device hanged and wouldn't load up the touch flow, nothing worked.
Click to expand...
Click to collapse
Yes, I had same problem.

Hmm afaik 'File system cache' in 1) is the same as the key HKLM\System\Storagemanager\Fatfs\cachsize in 2).
So tip 1 sets it to 8mb, and tip 2 changes it from 16mb to 32mb. So that suggests its 16m to start with?
Sounds like the file system filter cache is whats making the main difference. Thats this key:
HKLM\System\StorageManager\Filters\fsreplxfilt\Rep lStoreCacheSize
Can someone maybe post the original values of these two keys?

someone1234 said:
Hmm afaik 'File system cache' in 1) is the same as the key HKLM\System\Storagemanager\Fatfs\cachsize in 2).
So tip 1 sets it to 8mb, and tip 2 changes it from 16mb to 32mb. So that suggests its 16m to start with?
Sounds like the file system filter cache is whats making the main difference. Thats this key:
HKLM\System\StorageManager\Filters\fsreplxfilt\Rep lStoreCacheSize
Can someone maybe post the original values of these two keys?
Click to expand...
Click to collapse
There are 3 values to be changed.
1. The Icon Cache which is suggested to be changed to 131072. The registry setting is:
[HKEY_LOCAL_MACHINE\System\GDI\GLYPHCACHE]
"limit"=dword:00020000
The value is shown as hexadecimal, which is equivalent to 131072 in decimal.
2. The second value is to be changed in FAT File System cache.
3. The third value is to be changed is Filters File System cache.
The cache sizes in #2 and #3 are usually kept same, for example 32768 decimal (32MB). Though, this eats up a lot of memory, but makes the system very fast. Lately, I have seen in KaiSer and Universal that these values are set as dynamic values.
Hope this is helpful.
KOR!

anyone know which registry key can make the phone not blank the screen when answering call?

lwclam said:
anyone know which registry key can make the phone not blank the screen when answering call?
Click to expand...
Click to collapse
Yeah, people do know. Search for it.

Just read about a 'tweak' in another thread. It seems disabling "GPRS auto attach" in Advanced Configuration Tool helps in preserving battery live.
Read about it here: http://forum.xda-developers.com/showthread.php?t=395301
For me turning that option to off would be best solution as well. Even more so if it really helps save the battery.
Since I don't have a Diamond yet I havent gotten a chance to actually test this tweak.

Another thing I've found eats up a lot of battery life is the schedule to check email. I have my Direct Push set to an Exchange account and a second Internet Email account. Changing the frequency of checking the second account really makes a difference.

mkhattab said:
Another thing I've found eats up a lot of battery life is the schedule to check email. I have my Direct Push set to an Exchange account and a second Internet Email account. Changing the frequency of checking the second account really makes a difference.
Click to expand...
Click to collapse
agree. my setup is similar to you. i was using 10 mins to check my second IMAP account, i have only around 9-10 hrs standby time. Now, i changed that IMAP account to check in every 60 mins, now, standby time is extended to more than 12 hrs.

what was the previous default File system cache and file system filter cache setting, cause my phone has slowed down since i have changed it. please reply back to me as soon as possible. thank you

http://forum.xda-developers.com/showthread.php?t=397935&page=8
posts 75 and 76

Thanks alot for the fast reply, and just one other question did any one arabize the diamond cause i have tried but it says installation not done. Thanks again man

sorry guys...noob question
to get the SMS to wake up the phone,
where is the HKLM folder in registry?

wishmaker738 said:
sorry guys...noob question
to get the SMS to wake up the phone,
where is the HKLM folder in registry?
Click to expand...
Click to collapse
Read the first post in this thread!

Related

Trinityhacks v.0.2

A little step forward in this utility that modified registry setting.
Changes from ver. 0.1:
Added tweak to increase TCP Window to improve network performance.
Added button to device reboot.
Added tweaks to increase audio quality through Bluetooth.
Added tweaks to show/hide some icons.
This setting are taken mainly from this site (hermes) and pccool.
As usual tell me if there are problem (it's not full tested), suggestion and ... if you like it.
thanks
Cheers
Good work, i like it. Thanks.
Audio settings don't changes...but it's not a problem...Good work!
delivery1979 said:
Audio settings don't changes...but it's not a problem...Good work!
Click to expand...
Click to collapse
Can you tell me what doesn't work (step by step) so i can correct it?
Thank you in advance
Gianpy69
It works great.
Can you at this one too?
Disable annoying beeps when changing in-call volume
There are actually 3 different sounds in play here: the one at the bottom end of the slider (quietest), the one in the middle posisitions (standard), and the one at the top end of the slider (loudest). These are handled by 3 registry keys:
HKCU\ControlPanel\Sounds\LoudestInCallVolume
HKCU\ControlPanel\Sounds\QuietestInCallVolume
HKCU\ControlPanel\Sounds\StandardInCallVolume
Within each of these keys the default 'Script' value is 'p' for 'play', change the 'Script' value to blank (erase the 'p').
gianpy69 said:
Can you tell me what doesn't work (step by step) so i can correct it?
Thank you in advance
Gianpy69
Click to expand...
Click to collapse
I make the change into the select field..apply the selection and reset the pda.After the restart i go into the panel again and no selection appears...it's blank...I'm in office now so i can't test well...i can give you more information tonight
Some other tweaks (sorry....but i don't know if they works...)
File based Registry
HKEY_LOCAL_MACHINE\System\ObjectStore\RegistryType=0
Remove Ringtone dalay
HKEY_CURRENT_USER\ControlPanel\Sounds\RingTone0
Change 'Script' from 'av0pw3r' to 'av0pr'
Today Date Plugin on a single line
[HKLM\SOFTWARE\Microsoft\Today]
"AutoSingeLineDatePlugin" = dword:00000001
Disconnect GPRS/UMTS button
To add Disconnect button and a timer display showing how long GPRS is in use for the session:
HKLM\ControlPanel\Phone\Flags2 = 16 (DWORD decimal)
To have only Disconnect button:
HKLM\ControlPanel\Phone\Flags2 = 8 (DWORD decimal)
To disable both the Disconnect button and the timer:
HKLM\ControlPanel\Phone\Flags2 = 0 (DWORD decimal)
Enable/Disable GSM/UMTS Band Selection
[\HKLM\Software\OEM\PhoneSetting\]
"ShowUMTSBandPage"=dword:00000001
If they works and you integrate on your program....WITH the "Bass Fix" and the "ATI Imageon Fix" i think that TRINITY HACKS become a must-have for all trinity's users!!!
I activated all the performance hacks of v0.2
Now Avantgo does not start anymore!
Maybe it has something to do with the font cache settings!?
Deactivating the settings in the trinityhacks does not help.
Does anybody have the same problem?
How are the original registry settings, so I can rewrite them?
Thanks!
ulischultz said:
I activated all the performance hacks of v0.2
Now Avantgo does not start anymore!
Maybe it has something to do with the font cache settings!?
Deactivating the settings in the trinityhacks does not help.
Does anybody have the same problem?
How are the original registry settings, so I can rewrite them?
Thanks!
Click to expand...
Click to collapse
To increase font setting
HKLM\SYSTEM\GDI\GLYPHCACHE\limit = 16384 (DWORD decimal)
default
HKLM\SYSTEM\GDI\GLYPHCACHE\limit = 8192 (DWORD decimal)
Hope this help
Thanks, but no help with that!
Can you try, if avantgo starts on you device correctly? Maybe it has to do with some other settings like the filesystem-cache or anything else!?
Ok, I did a manual synchronization of Avantgo now via the server-settings and it worked now. However I think I let the fontcache at its small size for now...
ulischultz said:
I activated all the performance hacks of v0.2
Now Avantgo does not start anymore!
Maybe it has something to do with the font cache settings!?
Deactivating the settings in the trinityhacks does not help.
Does anybody have the same problem?
How are the original registry settings, so I can rewrite them?
Thanks!
Click to expand...
Click to collapse
I will try soon.
Thank you
Great application!
gianpy69 what programming language did you use to make this software?
Great work
AX3L said:
Some other tweaks (sorry....but i don't know if they works...)
[
Today Date Plugin on a single line
[HKLM\SOFTWARE\Microsoft\Today]
"AutoSingeLineDatePlugin" = dword:00000001
Click to expand...
Click to collapse
I don't get it on 1 line.
What must i do exactly.
I use Reso Registry.
J.P. said:
I don't get it on 1 line.
What must i do exactly.
I use Reso Registry.
Click to expand...
Click to collapse
You have to go to HKEY_LOCAL_MACHINE (HKLM)
Yes but what then string or key or something else.
Have someone a screendump of it?
J.P. said:
Yes but what then string or key or something else.
Click to expand...
Click to collapse
Do you know how to use registry? You have to be very sure of what you're doing.
Enter the folders HKLM\SOFTWARE\Microsoft\Today
then click on the AutoSingeLineDatePlugin
thne change the value to 1
KaYs3r said:
Do you know how to use registry? You have to be very sure of what you're doing.
Enter the folders HKLM\SOFTWARE\Microsoft\Today
then click on the AutoSingeLineDatePlugin
thne change the value to 1
Click to expand...
Click to collapse
Sorry, you have to add a DWORD with name AutoSingeLineDatePlugin with the value 1
i did it but it's still on 2 line's
I have it now on one line.
AutoSingeLineDatePlugin
i change it to
AutoSingleLineDatePlugin
and now it works

Useful WM6 Reg edits

Hi Everyone,
I am running WM6 and I discovered some useful reg edit for Treos on another forum. I able to have some of these work on my wing the sites i used for reference are below which include other hacks i didnt post...
http://pdaphonehome.com/forums/treo...obile-registry-tweaks-mods-please-sticky.html
http://wiki.treocentral.com/index.php/Registry_Hacks
This is a list of edits i did... or going to do in the near future...
SOME OF THESE HACK ARE OLD AND SHOW "HKEY" AS THE REG ROOT IN MY TESTING "HKEY" IS THE SAME AS "HKLM".... I WILL TRY ALL THE HACKS I ADDED IN THE NEXT FEW DAYS AND POST HOW OR IF THEY WORK....
This will have Windows look for your ringtones on your SD card
HKCU\ControlPanel\SoundCategories\Ring\Directory = "\Storage Card\"
(REG_SZ string, no quotes)
The default location may be "\Windows\" or "\Windows\Rings\" depending
on your Device provider
Increase font cache
To increase the font cache, speeding up font rendering at the cost of a bit of memory:
HKLM\SYSTEM\GDI\GLYPHCACHE\limit = 16384 (DWORD decimal)
To change it back to the default:
HKLM\SYSTEM\GDI\GLYPHCACHE\limit = 8192 (DWORD decimal)
You can set the value to pretty much anything you like
Enable FileSystem cache
To enable the FileSystem cache, speeding up overall performance at the risk of the cache not being written on a sudden reset:
HKLM\System\StorageManager\FATFS\EnableCache = 1 (DWORD decimal)
To disable again:
HKLM\System\StorageManager\FATFS\EnableCache = 0 (DWORD decimal)
Note that by default, the cache size is zero, and you will see no effect. See "Increase FileSystem cache" to incease the cache size
Increase FileSystem cache
To increase the file system cache:
HKLM\System\StorageManager\FATFS\CacheSize = 4096 (DWORD decimal)
To return the file system cache to zero:
HKLM\System\StorageManager\FATFS\CacheSize = 0 (DWORD decimal)
You can set the value to pretty much anything you like
Increase FileSystem filter cache
To enable the file system filter cache, speeding up overall performance with file mangement:
HKLM\System\StorageManager\Filters\fsreplxfilt\ReplStoreCacheSize = 4096 (DWORD decimal)
To return the file system filter cache to zero:
HKLM\System\StorageManager\Filters\fsreplxfilt\ReplStoreCacheSize = 0 (DWORD decimal)
You can set the value to pretty much anything you like
Change the thickness of scrollbars
To change the thickness of the scrollbars at the right/bottom of documents larger than the screen, adjust...
For the horizontal (bottom) scrollbar:
HKLM\System\GWE\cyHScr = 9 (DWORD decimal)
For the vertical (right) scrollbar:
HKLM\System\GWE\cxVScr = 9 (DWORD decimal)
The default thickness is 13. You can set the value to pretty much anything you like
Change the length of scrollbar arrow buttons
To go with changing the thickness of the scrollbars, you may wish to change the length of the scrollbar arrow buttons...
For the horizontal (bottom) scrollbar arrows:
HKLM\System\GWE\cyVScr = 9 (DWORD decimal)
For the vertical (right) scrollbar:
HKLM\System\GWE\cxHScr = 9 (DWORD decimal)
The default length is 13. You can set the value to pretty much anything you like
Change the location of 'Temporary Internet Files'
When browsing the web, pages and images are saved in the 'Temporary Internet Files' location. You can change this location to, for example, your Storage Card:
HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders\Cache = "\Storage Card\cacheie" (REG_SZ string, no quotes)
To return to the original location:
HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders\Cache = "\Windows\Profiles\guest\Temporary Internet Files" (REG_SZ string, no quotes)
Disable 3gp (video) size limit (would like to note if the file size is over 300k most cell phones cant recieve the file)
To disable the 3gp (video recording format) size limit:
HKLM\SOFTWARE\HTC\camera\AppDefSettings\P3\EnableLimit = 0 (DWORD decimal)
To re-enable:
HKLM\SOFTWARE\HTC\camera\AppDefSettings\P3\EnableLimit = 1 (DWORD decimal)
Hide/Show battery indicator in Task bar (NEVER TRIED IT)
If you wish to hide the battery indicator in the task bar on some devices, you can set:
HKLM\Services\Power\ShowIcon = 0 (DWORD decimal)
And to show:
HKLM\Services\Power\ShowIcon = 1 (DWORD decimal)
Note that this icon and its feature may not be available on your device at all. For example, the HTC Wizard regularly ships with a battery indicator in the Tray instead, governed by "Windows\Startup\Init_Tray.exe".
Change the keyboard backlight duration
To change the duration of the keyboard backlight, you can set (example is 30 seconds):
HKCU\ControlPanel\Backlight\QKeyLedTimeout = 30 (DWORD decimal)
Please note that this may not work on some devices. One such notable exception is the HTC Wizard.
Voice Command to open a specific web site
You can use Voice Command to open a specific web site. For example I wanted to say "Open Weather" and it would go straight to my local forecast on www.weather.com.
To do it I:
1. Opened internet explorer, found my local forecast and saved it as a favorite.
2. Opened Windows Explorer and copied the internet shortcut I had created from the Windows\Favorites folder and pasted it in the Windows\Start Menu\Programs folder.
3. I renamed the shortcut to "Weather"
I can now use Voice Command to go directly to my forecast. Obiously this could be done with any website I visit on a regular basis (like ORB). I suppose if I create enough my programs folder will look pretty full, but with Voice Command I don't really care so much.
Pocket Internet Explorer Undercover as Internet Explorer 6.0!
This one has pros and Cons to it. The pro is you can access sites that filter and stop PDAs from accessing them. The con is you will not see any PDA optimized sites on the web and pages may not display or work right because it assumes you have full access to java, asp, etc....
Disguise your version of Pocket Internet Explorer Internet Explorer 6.0 running on Windows XP!
Many web sites that require encryption (such as banks and online retailers) don't verify if your browser support high encryption, they just check the browser version.
This registry hack will make Pocket Internet Explorer identifies itself as Internet Explorer 6.0 running on Windows XP, which may let you connect to web site that check the browser version
NOTE - This hack will prevent web sites that provide Pocket PC specific content to be able to know you're actually using a Pocket PC.
Browse to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ Windows\CurrentVersion\Internet Settings\User Agent \
Change the default value from "Mozilla/2.0" to "Mozilla/4.0".
Change the "Version" value from "MSIE 3.02" to "MSIE 6.0".
Change the "Platform" value from "Windows CE" to "Windows NT 5.1".
Some web sites may just compare the user agent string, but if this is not enough, browse to the Post Platform\ sub key and delete the "240x320" value that specifies screen size.
TWO: I want to know if there is a hack so when you download files they go to the storagecard instead of you chooseing storage card... i download a lot of vids from tinytube.net
THREE: I hate seen that message saying connecting to my data serive and pressing hide all the time is there away to make it stay on hide all the time??
Four: Thank you for taking the time to read this and offer some assistance!!
everyone Try Them.. Try Them I Say
Why ? ......
For the backlight duration the value to change is: HKCU\ControlPanel\Backlight\KeyLightTimeout
Thanks hyphen!
hyphen said:
This will have Windows look for your ringtones on your SD card
HKCU\ControlPanel\SoundCategories\Ring\Directory = "\Storage Card\"
(REG_SZ string, no quotes)
The default location may be "\Windows\" or "\Windows\Rings\" depending
on your Device provider
Click to expand...
Click to collapse
On the T-Mobile Wing, you can pick any sound for your ringtone from settings/sounds & notifications, regardless of where they are stored.
Disguise your version of Pocket Internet Explorer Internet Explorer 6.0 running on Windows XP!
Many web sites that require encryption (such as banks and online retailers) don't verify if your browser support high encryption, they just check the browser version.
This registry hack will make Pocket Internet Explorer identifies itself as Internet Explorer 6.0 running on Windows XP, which may let you connect to web site that check the browser version
NOTE - This hack will prevent web sites that provide Pocket PC specific content to be able to know you're actually using a Pocket PC.
Browse to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ Windows\CurrentVersion\Internet Settings\User Agent \
Change the default value from "Mozilla/2.0" to "Mozilla/4.0".
Change the "Version" value from "MSIE 3.02" to "MSIE 6.0".
Change the "Platform" value from "Windows CE" to "Windows NT 5.1".
Some web sites may just compare the user agent string, but if this is not enough, browse to the Post Platform\ sub key and delete the "240x320" value that specifies screen size.
Click to expand...
Click to collapse
There is no value folder "User Agent" on the Tmobile wing.
I would love to change this setting so it thinks Im running XP and 6.0, does anyone know the correct registry values to change?
Change slide-out keyboard layout
If you have a Device from one country, but would like to use the keyboard layout of another, you can change the keyboard's language setting to do so...
For US layout (QWERTY):
HKCU\ControlPanel\Keybd\Locale = 1033 (DWORD decimal)
For German layout (QWERTZ):
HKCU\ControlPanel\Keybd\Locale = 1031 (DWORD decimal)
For French layout (AZERTY):
HKCU\ControlPanel\Keybd\Locale = 1036 (DWORD decimal)
wonder if that will work on the dash with the cooked roms..
TylerC161 said:
There is no value folder "User Agent" on the Tmobile wing.
I would love to change this setting so it thinks Im running XP and 6.0, does anyone know the correct registry values to change?
Click to expand...
Click to collapse
An easier method I would say would be to use PIE Plus, it adds much functionality to your mobile web browser. PM if you would like to check it out.
TylerC161 said:
There is no value folder "User Agent" on the Tmobile wing.
I would love to change this setting so it thinks Im running XP and 6.0, does anyone know the correct registry values to change?
Click to expand...
Click to collapse
Pocket Internet Explorer identifies itself as Internet Explorer 6.0 running on Windows XP, which may let you connect to web site that check the browser version
I have an unbranded p4350 wm6, and discovered the "User Agent" key was to located in HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ Windows\CurrentVersion\Internet Settings\5.0\, there you'll find "User Agent" to modify your settings. I did this with mine. Hope this helps.
Change the default value from "Mozilla/2.0" to "Mozilla/4.0".
Change the "Version" value from "MSIE 3.02" to "MSIE 6.0".
Change the "Platform" value from "Windows CE" to "Windows NT 5.1".
Reg Tweak for Auto download of pics in e-mail
So far nobody (I've searched other forums) has found a reg tweak to automatically download pictures encoded in html email messages, instead of clicking the "Download Pictures" warning. If anyone here knows of one please share.
I dont know the tweak, but I used SK-Tools to change the PIE download location to my Storage Card and it works!
I tried to change the registry value for my service provider, as the name is quite long and on some programs, like iFonz it does cover part of the time display. I did change it and it worked, but at start up or after a soft reset it goes back to the former name. Any suggestions?

IMPORTANT [upadated] Wing/Herald Information and tweaks/cabs Thread

Current Update:Feb 1st 2008 12:58AM
Wing for NOOBS like me.
All information in this thread was copied from other peopled, all I have done is put it in one place.. I will update this from time to time
DISCLAIMER:
I am in no way responsible the content listed below, most of this should work as the people of the community do help each other. Please be careful. And report any errors to me.
Adding Information, If you wish to add information to this post, please private message me it, I will add the info, please provide me a link to the data if you have it, and the original writer of said info, I will give the credit to the writing and the provider of said info.
please send it with the general area for it to go
ie: part 2:tweaks or part 4: random stuff.
so i can add it to the proper area fast, and if it doesnt fit into anything - i will add it to random stuff or new area. but we have the random stuff
Part 1: useful thread Post.
[*]Part 2: Random tweaks.
[*]Part 3: Rom’s Touch it/Open Touch Wing.
[*]Part 4: Random Info: random stuff that is unsorted
[*]Part 5: T-Mo Wing RUU for USA [the original tmobile install]
Updated on December 17 2007
Part 1: Useful Threads
Cab install for the Wing
The Following is from zcink @ XDA
Original thread @ http://forum.xda-developers.com/showthread.php?t=341867
Great Wing Info Thread
The following is from Nyer78 @ XDA
Original Thread @ http://forum.xda-developers.com/showthread.php?t=326655
General HTC Cabs
The Following is from patr!k @ XDA
Original thread @ http://forum.xda-developers.com/showthread.php?t=344533
All WM6 Roms
The following is from papamopps @ XDA
http://forum.xda-developers.com/showthread.php?t=358030
Part 2 tweaks.
The Following is from – Tater_Tot24 @ Howard forums
Original thread @ http://www.howardforums.com/showthread.php?t=1215155
Please Note that some of these entries only apply to the WING.
Add Side Button Functionality:
1. Using a registry editor go to HKLM\Software\Microsoft\Shell\Keys
2. In Keys, create a new Key named "40C7".
3. Copy the contents of 40C5 to to 40C7.
4. Edit the "Name" value replacing the "4" with a "5" (5 is Voice command button).
5. Close the registry editor.
6. In Settings\Buttons you should see the new "Button 5(Hold)" entry. If not, soft reset.
Note: I had to make voice command the hold function and screentoggle the non hold function for it to work correctly.
Camera Settings:
1. Open the camera, so you can see images thru the camera lens.
2. Go to bottom of screen & click on the "Y" at far left side.
3. Now move to the 4th icon at the bottom, and set the resolution on "L" and the quality on Super Fine (not Basic).
4. Move to the next icon on the right, and set the Capture Mode on either "Burst" or "Sports"
5. Next, click the icon at far left and set your Capture Speed to either Moderate or Fast, and "Snapshots" to at least 3.
6. Click on the next icon on the right and set it on Storage Card.
7. Finally, click the "Sun" and set the White Balance on Auto.
8. Click OK in the upper right, and you're almost set. Just go now to far left of camera screen and click either of the tiny > arrows until you come to 1/3 (or 1/5 or 1/7 or 1/10, depending on how you set "Snapshots.")
9. Now you're set to take some really great pictures. They will be sharp & clear all the way from about 12 inches to infinity.
10. For sharper pictures, leave the setting at 1x. Anything else is a "Zoom" shot.
Enhanced File System Performance:
Registry: HKLM\System\StorageManager\FATFS
Key: CacheSize (dWord)
Default: 0 (I am not sure what this equates to, the valid values I know about are 4096, 8192, 16384)
New Value: 8192
Hide SIM Contacts:
Registry: HKCU\ControlPanel\Phone
Key: ShowSim (dWord)
Default: 1 (show)
New Value: 0 (hide)
Active Sync Running in the Background Fix:
1. Create a “Fake Server”
Configure Server Menu  Activesync  Programs 2.Go to Start
3. In the following screens you can enter any old garbage. It does not matter, but just in case your unsure, just type the following in the indicated boxes:
4. Server Address: fake / User name: fake / Password: fake / Domain: fake. Then you are finished creating the fake server
5. Finally, UNCHECK the box in the time zones tab in the phone settings (This may sound silly, but it works! I promise!!)
MyFavs Missed Call Fix:
Registry: \HKLM\Security\Phone\NoLog
Key: List
Action: REMOVE
Hard Reset Instructions:
1. Hold down both of the “soft buttons”
2. Perform a soft reset with the stylus while still holding down the buttons
3. Push the green phone button to confirm that you do want to do a hard reset
DeBrand the Phone:
1. Perform a Hard Reset (instructions listed below)
2. Phone cycles through format, installs WM6, then prompts you to config touch screen
3. Install finishes and loads WM6
4. Then a prompt appears warning that EXT ROM will install extra contents (don't install! poke the soft reset button before EXT ROM install)
5. Hit soft reset button when EXT ROM prompt appears, you have 3 seconds!
6. Power on like normal
Send Large MMS:
Registry: HKLM\Software\Arcsoft\ArcSoft MMS UA\Config\UI\Size Limit
Key: wap2sendlimit1 (you can also change wap1sendlimit1)
Default: 307200
New Value: 1228800 (1200K)
Set the new value by going to Text/Multimedia --> Menu --> New --> MMS --> Menu --> Options --> MMS Options --> Servers --> T-mobile MMS
MMS Sending Issue Fix:
1. Due to incorrect Port setting for the MMS server, the phone may not be able to send MMS messages all the time.
2. Go to Text/Multimedia --> Menue --> New --> MMS --> Menu --> Options --> MMS Options --> Servers --> T-mobile MMS
3. Make sure the settings are set to: Gateway: 216.155.165.50 / Port Number: 8080 / Server: http://216.155.174.84/servlets/mms
Remap Soft Buttons:
For Calendar
Registry: HKCU\Software\Microsoft\Today\Keys\112
Key: Default
Default: Calendar
New Value: Internet (anything you want goes here)
Registry: HKCU\Software\Microsoft\Today\Keys\112
Key: Open
Default: HTCCalendar.exe
New Value: \Windows\iexplore.exe (again, anything you want goes here)
For Contacts
Registry: HKCU\Software\Microsoft\Today\Keys\113
Key: Default
Default: Contacts
New Value: (anything you want goes here)
Registry: HKCU\Software\Microsoft\Today\Keys\113
Key: Open
Default: \Windows\RSK\Contacts.lnk
New Value: (again, anything you want goes here)
Remove / Modify Startup Sound:
Registry: HKLM\SOFTWARE\HTC\StartupAnimation
Key: Enable (dWord)
Default: 1 (jingle on)
New Value: 0 (jingle off)
Registry: HKLM\SOFTWARE\HTC\StartupAnimation
Key: Volume (dWord)
Default: 127
New Values: 16 - 200
You can also modify the sound and animation by changing the WAV and GIF files in these two keys.
Registry: HKLM\SOFTWARE\HTC\StartupAnimation
Key: WAVFile (SZ String Value)
Default: \Windows\T-Mobile startup.wav
New Value: (whatever you want)
Registry: HKLM\SOFTWARE\HTC\StartupAnimation
Key: GIFFile (SZ String Value)
Default: \Windows\TMO_Startup.gif
New Value: (whatever you want)
Remove the Tray Icon from Today Screen:
Registry: \HKLM\init\
Key: Launch92
Action: DELETE
Note: If you want to keep some but not all of the icons:
Registry: HKLM\Software\HTC\TrayApplet
There you'll find listings for each icon (the folders are for the WinWap, MyFaves, and CommManager tray icons). Remove the ones you don't want and soft reset. If you remove the music player settings, you will then have to uncheck the plug-in from Today items.
Adding Slide Sounds:
1. First you are going to need two .wav files.
2. Once you have the two sounds that you want to use, Rename them to Slider3_in.wav and Slider3_out.wav and place them in the \Windows Folder on your phone.
3. Go to the Registry: HKLM\Software\HTC\SlidingSound\.
4. Once your there you should see 3 Folders (keys) that are labeled 0-2, and 2 Dword Files (ActiveSlidingSound and SlidingSoundEffect).
5. In that same directory, you need to make a new folder (key) and label it "3". Once that is made, you need to go inside that "3" which should be empty and have nothing inside.
6. Now you need to make a new String.Label the String "in" without quotes, and then set the string to "Slider3_in.wav". Now you should have one string inside folder (key) 3.
7. Now you need to make another String inside of folder (key) 3. Just follow step 5, but instead of using "in" use "out". So it should be labeled "out" and should be set to "Slider3_out.wav".
8. Next, create another String inside of folder and call it “Default” (no quotes). Now set that sting to whatever you want the new schema to be called (i.e. wind chimes, customer, etc).
9. Now head back to the registry: HKLM\Software\HTC\SlidingSound\, where you should now see folders (keys) 0-3 now and two Dwords files.
10. Now change Dword ActiveSlidingSound to 3, which is the new sound you created.
Disable the SMS Sent notification
Regisrty: HKLM\Software\Microsoft\Inbox\Settings\
Key: SMSNoSentMs (decimal)
Default: 0 (on)
New Value: 1 (off)
Note: Please note that the 'Settings' key may not exist in your device, and thus may have to be created first.
Storage Card Settings:
Mail Attachments
1. Go to Text/Multimedia --> Menu --> Tools --> Options --> Storage
2. Then check the box!
IE Storage
Registry: HKCU\Software\Microsoft\Windows\CurrentVersion\Exp lorer\Shell Folders
Key: Cache (string)
Default: Program Memory
My Value: \Storage Card\Internet Files\Temporary Internet Files
Key: Cookies (string)
Default: Program Memory
My Value: \Storage Card\Internet Files\Cookies
part 2a
Key: History (string)
Default: Program Memory
My Value: \Storage Card\Internet Files\History
Note: Please see the “camera settings” to store pictures and video to the storage card.
Video from Portrait to Landscape:
Registry: HKLM\System\GDI\
Add key "Rotation"
Add Dword "LandscapeMode"=0
Move / Remove Startup Files:
1. make directory "\Windows\StartUpDisabled"
2. If you don't use MyFav5 Plan then copy "\Windows\StartUp\My5MsgCenter.lnk" to "\Windows\StartUpDisabled\My5MsgCenter.lnk"
3. If you don't use Voice Commands often (you can still manually start app) then copy "\Windows\StartUp\Voice Command.lnk" to "\Windows\StartUpDisabled\Voice Command.lnk"
Remove Services:
4. Go to "HKEY_LOCAL_MACHINE\Services"
5. If you don't use MyFav5 Plan (SMSCSend links to my5client.dll, I don't have My Fav plan, so I don't need this service)
a) save SMSCSend reg export somewhere for backup
b) delete "HKEY_LOCAL_MACHINE\Services\SMSCSend" from registry
6. Go to "HKEY_LOCAL_MACHINE\Services"
7. If you don't use Windows Live
a) save Windows Live reg export somewhere for backup
. b) delete "HKEY_LOCAL_MACHINE\Services\Windows Live" from registry
Other Services:
Other Services
"HKEY_LOCAL_MACHINE\Services\BTHIDSVC"
loads the Bluetooth Human Interface Device drivers and service
"HKEY_LOCAL_MACHINE\Services\BTAGSVC"
loads the Bluetooth Audio Gateway drivers and service
"HKEY_LOCAL_MACHINE\Services\BthAsPlugin"
loads Active Sync over BlueTooth service
"HKEY_LOCAL_MACHINE\Services\Trusted"
loads WSP Push, Push Router, SIM tool kit, SIM Init
"HKEY_LOCAL_MACHINE\Services\OBEX"
object exchange - protocol for data exchange between devices or syncing
"HKEY_LOCAL_MACHINE\Services\NOTIFY"
pop up notifications for events
"HKEY_LOCAL_MACHINE\Services\credsvc"
Credentials Manager
"HKEY_LOCAL_MACHINE\Services\CERTENROLL"
performs enrollment and renewal of certificates
"HKEY_LOCAL_MACHINE\Services\WirelessService"
Wireless Monitor Service
Increase voiceVolume:
Regisrty: HKCU\Control Panel\SoundCategories\InCall
Key: AttenuationCategory
Default: 2
New Value: 1
Regisrty: HKCU\Control Panel\SoundCategories\InCall
Key: InitVol
Default: 3
New Value: 10
Increase Voice Command Volume:
Registry: HKCU\Control Panel\SoundCategories\VoiceCommand1
Key: AttenuationCategory
Default: 3
New Value: 1
Registry: HKCU\Control Panel\SoundCategories\VoiceCommand1
Key: InitVol
Default: 5
New Value: 20
Better sound over A2DP
Registry: HKLM\Software\Microsoft\Bluetooth \A2DP\Settings
Key: MaxSupportedBitPool
Default: 30
New Value: 58
Registry: HKLM\Software\Microsoft\Bluetooth \A2DP\Settings
Key: BitPool
Default: 30
New Value: 58
Note: If not good enough, then delete: "MaxSupportedBitPool"=XXX &
"BitPool"=XXX.
Unlocks & Unhide the Extended Rom in Explorer:
Registry: HKLM\System\StorageManager\AutoLoad\TRUEFFS_DOC1
Key: bootphase
Default: 1
New Value: 2
Registry: HKLM\System\StorageManager\Profiles\TRUEFFS_DOC1
Key: mounthidden
Default: 1
New Value: 0
Registry: HKLM\System\StorageManager\Profiles\TRUEFFS_DOC1
Key: folder
Default: ?
New Value: Extended_ROM
GMail Settings:
You can access your Gmail messages from the Wing in three ways:
Set up Gmail as a POP3 account
Automatically forward Gmail
Access Gmail from the Internet
Set up Gmail as a POP3 Account
1. Log in to your Gmail account from your PC.
2. Select Settings at the top of any Gmail page.
3. Select the Forwarding and POP tab in the orange Mail Settings box.
4. Under POP Download, choose to Enable POP for all mail or Enable POP only for mail that arrives from now on.
5. Specify whether you want Gmail to keep a copy of messages in the Inbox when you access messages through POP.
6. Select Save Changes.
I. Auto-configure Gmail from your Pocket PC phone
1. Press Start --> Messaging.
2. Select New Email Account.
3. Enter your e-mail address and make sure the box is checked for getting the settings automatically
4. In the Auto configuration screen, wait until the Status changes from Connecting to Completed and then select Next.
5. Enter your name, user name, and password (DO NOT REMOVE the recent: from in front of the username that it automatically provides) and select Next.
6. Ensure Account type is set to POP3 and select Next.
7. Make sure that Incoming Mail is set to pop.gmail.com:995
8. Make sure that Outgoing Mail is set to smtp.gmail.com:465 and select Finish.
9. Select Yes to confirm that you would like to download mail for this new account now.
II. Automatically Forward Gmail to Another Account
1. Log in to your Gmail account from your PC.
2. Select Settings at the top of any Gmail page
3. Select Forwarding and POP in the orange Mail Settings box.
4. Select Forward a copy of incoming mail and enter the e-mail address to which you'd like your e-mail forwarded.
Now your Gmail will automatically be forwarded to this account.
III. Access Gmail from the Internet
If you don't subscribe to an unlimited data plan or need only occasional access to your Gmail account you may prefer to access your Gmail from your Pocket PC phone using Internet Explorer. To access your account through Internet Explorer, go to http://m.gmail.com.
alternate Gmail Settings
IMAP4 style
provided from Google!
http://mail.google.com/support/bin/answer.py?answer=78886&topic=12814
Part 3 Roms
Part 3 Roms...
Touch it and Open Touch are the popular Roms
as well as CleanROM
The roms are basicly rebuilds of the operationg system on the phone, and whats preinstalled. These roms are much faster and have more prog mem then the stock rom.
All WM6 Roms
The following is from papamopps @ XDA
http://forum.xda-developers.com/showthread.php?t=358030
Keyboard Fix For Roms
Thanks to duprade
http://forum.xda-developers.com/showthread.php?t=359696
I will not give advice to which is better. Use em and figure that out on your own
Part 4: Random Stuff
Part 4 : Random Stuff
Wing as a Webcam
Found at XDA
http://forum.xda-developers.com/showthread.php?t=348187&highlight=WING+AS+A+WEBCAM
Modifying and/or Removing Tray Icons
Remove the Tray Icon from Today Screen:
Registry: \HKLM\init\
Key: Launch92
Action: DELETE
Note: If you want to keep some but not all of the icons:
Registry: HKLM\Software\HTC\TrayApplet
There you'll find listings for each icon (the folders are for the WinWap, MyFaves, and CommManager tray icons). Remove the ones you don't want and soft reset. If you remove the music player settings, you will then have to uncheck the plug-in from Today items.
Part 5: T-mo Wing RUU - USA
Part 5 : T-mo Wing RUU - USA
From At XDA xavier6303
Found http://forum.xda-developers.com/showthread.php?t=321717
This will reset your phone, basically reinstall windows and all the phone, heard it works as a decent unbricker,
How to enter boot mode
Restart the phone and hold the voice and camera button
Please don´t post in this thread. All important things are mentioned. If something is missing please PM nyitalian - so he can isnert.
After all is in - the thread will be closed.
Thanks for this great thread!!!
updated with IMAP4 settings for gmail account connection
Feb 1st 2008

diamond registry question

sorry for this stupid question but for these tweaks
Code:
1. Boost TFL3D Performance --> Using Advanced Config, change File system cache to 8mb and file system filter cache to 131072
2. Boost TFL3D Performance --> HKLM\System\Storagemanager\Fatfs and change key Cachesize from 16384 to 32768
3. Wake Up on New SMS --> HKLM\Drivers\BuiltIn\RIL : DisableSMSWakeUpEvent <-- set to "1" by default. Change value to "0"
4. Switch Mute Call on phone flipped face down: HKLM\Software\HTC\PHONE : FaceDownMuteRing: change value to "1" (FIXED: thanks KuKuRiKu and everyone)
5. Change CallWaiting Tone --> HKLM\Software\HTC\PHONE : by default set to \windows\waitingtone.wav by default. change to anything else
6. Boost TFL3D Scrolling Speed --> - HKLM\SYSTEM\GDI\GLYPHCACHE\limit = 16384 or 32768 (DWORD decimal)
- To change it back to the default: - HKLM\SYSTEM\GDI\GLYPHCACHE\limit = 8192 (DWORD decimal)
and others I don't know how to open registry editor. Can somebody explane me ?
first get a registry editor
total commander
or
PHM Registry Editor
will do fine
Big thanks.
I installed total commander , but i couldnt find HKLM, theres only 4 roots of HKEY_XXXXXXXX
anyone can help, im new at this
falcon212 said:
I installed total commander , but i couldnt find HKLM, theres only 4 roots of HKEY_XXXXXXXX
anyone can help, im new at this
Click to expand...
Click to collapse
HKLM = shortcut for HKEY LOCAL MACHINE
omg... im moron... LOL

Unable To Change Large Fonts in Diamond

Hi there,
I have stopped using TF3D fully and resorted with a jam packed stnadard Today screen.
Now I would like to make the text sizes for Diamond the same as the normal WM 6.1 too.
I have unchecked Big Font in Start Menu under settings and also have done"
32. Change system and context menu font size:
HKEY_LOCAL_MACHINE\system\gwe\menu\popfnt
and change the value for the "Ht" entry to "1000" decimal (from 1200)
And have also used Advanced Configuration Tool v3.2 to change context menu size to standard 1000.
But still context menus and some texts for programs are huge! Even after a soft reset.
Anyone facing the same problems?

Categories

Resources