Related
Could someone please post a picture of the standard dialer in the Kaiser?
Here's a picture of mine:
Thank you.
This is the default WM6 dialer (not sure whether it has smartdialing enabled, but usually it does). You can try switching to the HTC dialer with KaiserTweak, but that might not work (if the dialer images are not on the phone). If it doesn't work - just revert back using KaiserTweak to the WM6 dialer . Personally I prefer this dialer with smartdialing because the contacts that were dialed before show up first when dialing a name...
Also - I think schap has a dialer too - something called reTouched or so. But I didn't try it...
Thank you
But I will need a dialer with local language support.
This is not the default WM6 dialer, This is the default WM5 dialer...
I was told the same in a local forum
The question is, which dialer can I install that will support other languages?
Another option would be to customize the skin of a dialer that I like and will fit the Tilt. In this case, can anyone point me to the exact steps required to do so?
Thank you.
Don't know about localizing. Regarding whether it's the WM5 or WM6 dialer, what's the difference? When I look at the screen it looks exactly the same as the dialer on my Kaiser (WM6) when I turn of the HTC dialer (using the reg-tweak or KaiserTweak).
Regards,
Nika.
Nika, could you please expand on that?
nikagl said:
When I look at the screen it looks exactly the same as the dialer on my Kaiser (WM6) when I turn of the HTC dialer (using the reg-tweak or KaiserTweak).
Regards,
Nika.
Click to expand...
Click to collapse
I use EZDIAL on my Tilt, and I had the default smart dialing turned on.
This resulted in the EZDIAL serch results being obscured by the smart dialing popup window (which basically emulates what EZDIAL does, only with a nicer presentation).
I then turned off smart dialing, and can now see the EZDIAL results on screen.
But the thing is, I wanted to use a nicer smart dialer than EZDIAL, and tried to install a localized one posted in a local forum by Nadavi (a distinguished member here), and it didn't work.
So I wanted to understand why this was happening, and was told that my Tilt couldn't have any other dialer than the default one (since I'm with the standard ROM, and I need a localized skin).
nikagl said:
Don't know about localizing. Regarding whether it's the WM5 or WM6 dialer, what's the difference? When I look at the screen it looks exactly the same as the dialer on my Kaiser (WM6) when I turn of the HTC dialer (using the reg-tweak or KaiserTweak).
Regards,
Nika.
Click to expand...
Click to collapse
its because you have a tilt as well.
original microsoft wm6 dialer:
original microsoft wm5 dialer:
HTC dilaer:
Does anyone know how to switch from the HTC dialer to the standard WM6 one?
The HTC dialer does not have soft 'Talk' and 'End' buttons, which I find very annoying...
What do you mean?
elivne said:
its because you have a tilt as well.
Click to expand...
Click to collapse
And I second the question regarding the ability to switch between the dialers.
Blacksheep said:
Does anyone know how to switch from the HTC dialer to the standard WM6 one?
The HTC dialer does not have soft 'Talk' and 'End' buttons, which I find very annoying...
Click to expand...
Click to collapse
Download KaiserTweak, copy KaiserTweak to your machine, Download the latest XML, copy that to your machine too, and use KaiserTweak to switch between the dialers...
Regards,
Nika.
elivne said:
its because you have a tilt as well.
original microsoft wm6 dialer:
original microsoft wm5 dialer:
HTC dilaer:
Click to expand...
Click to collapse
How can i change to HTC dilaer??? As on the second picture???
ze bediuk ma she shaalti oto...
That's the question...
As I replayed before:
I suggest the following:
1. find a full install of the dialer(I don't know of any).
2. change your rom to an HTC rom(much better! ))
3. find an answer at XDA....
wisniak, I replayed your question on ppcfreak.
Quickest way to the Dialer
This may be a silly question, but without opening the keyboard, what is the quickest way to get the dialer to appear on the screen?
emmit said:
This may be a silly question, but without opening the keyboard, what is the quickest way to get the dialer to appear on the screen?
Click to expand...
Click to collapse
Try Pressing the Green Call button on your device, that should bring up the dialer.
To change to the default WM6 dialer, which is actually listed above as the 2nd HTC dialer. Here is the registry key that needs changed:
HKEY_LOCAL_MACHINE / Security / Phone / Skin
Change the value of 'Enabled' from 1 to 0
Please note, that there is no video calling available using this dialer.
Just thought I would clarify a little bit on what these dialers actually are:
At&t WM6 Dialer:
HTC Touch style dialer:
Default Microsoft WM6 dialer:
Default Microsoft WM5 dialer:
I used Kaiser Tweak and the dialer definitely looks different now
I'll post an image later today.
njmarchetti said:
Just thought I would clarify a little bit on what these dialers actually are:
At&t WM6 Dialer:
Default Microsoft WM6 dialer:
Click to expand...
Click to collapse
Dude, you are absolutely wrong,
The first is the built in WM6 dialer, available on every WM6 phone edition (you can unhide it with a tweak manager) - all WM^ phone editions have it(never mind the colors)
The secound is the "smartdialing" HTC dialer - available only on HTC phone editions devices,(never mind the colors)
Here's what it looks now:
This is the dialer skin I have after using the Kaiser Tweak.
EZDIAL does not come up, even though it's properly installed.
MS Voice Command instead of Cyberon Voice Commander for AT&T Tilt with Alex's ROM?
Hi -
I have an AT&T Tilt, unlocked thanks to jocky, and running Alex's ROM (v5.HTC.181).
I'd like to replace the Cyberon Voice Commander which is in Alex's ROM with Microsoft Voice Command.
I *think* that the AT&T Tilt, by default, did have Microsoft Voice Command on it, which suggests that I have an implied license for it... right? (And I did buy Voice Command 1.6 SmartPhone for my earlier S620, so I have probably double-paid for it anyway...)
So, how do I get that original piece of AT&T-installed software back on this device after having flashed Alex's ROM?
I just prefer MS Voice Command's ability to search Contacts by sound, over Cyberon Voice Commander's requirement to voice tag individual contacts.
Thanks
-Jay
Jay
I do not think that MSVC shipped with the Tilt
to put it on your Tilt, just install the 1.6 that you purchased. I have it and the other one on my phone. I don't find the Voice Commander to recognize my voice commands as well as MSVC.
Uh, I had some trouble getting it to work, and frankly, I'm not sure what I did to get it working. I did do these things:
I had installed the patched MSVC files. (search for VOICECOMMANDREPLACEMENTFILES )
I also installed the OEM_Assign_PTT_BUtton.cab, but I'm not sure it is necessary. I'd hold off on that until last resort.
Maybe it will work just by installing it, and the replacement files. I had installed the additional memmaid apps and uninstalling them was one thing I did too.
Sorry, I can't be more exact.
Thanks, that did get Voice Command on and mostly in place of Cyberon Voice Commander. Still working on getting the bluetooth headset button to launch Voice Command.
-Jay
The launch wiht the BT headset was exactly what I had problems with. Again, I got it working, but sadly, I don't know how.
My MSVC worked straight after install..except that I do not get a call waiting tone after installation. Nobody seems to have a fix...2 of my friends with kaisers all have the same problem and we all have different roms.
This thread really worked for me. http://forum.xda-developers.com/showthread.php?t=337501
There are two versions of MSVC in the forum and they both have the same version number. I found that it was impossible to get the 4MB variant to work even with the regedits. (This is the version that you have to go into Programs and enable/save/ etc.) The other variant is only 3MB and has worked on every ROM I have installed it to using the directions in the above thread and no regedits are required.
Hope this helps...
anyone know where to get the cab for the smart dialer program? it helps to ease my dialing names? Somehow missing from my kaiser dutty new rom.......
Not sure what you mean by smart dialer but the dialer that was in Dutty's 19199 rom is available on the second posts of his 209 build. I searched the forums and didn't come up with much. Try searching:
smartdialingwm5_257.cab
Are you sure it's not in there? You might just need to enable it.
Dont know what you are looking for exactly, I use this one on a stock AT&T ROM
screenshots and CAB attached.
tyguy its exectly what i needed.......but how come its not included in the roms?? thanks alott
Everybody likes different dialers I know even some who like the original one coming with the AT&T ROM.
It's the same as with "what's included in ROMs". I'm fine for now with a bloatware free installed 2nd gen AT&T (beside the power sucking radio) and the SPB products and would rather like to see "plain pale ROMs" with just the major fixes (like camera fix) and perhaps a good task manager and HTC Audio. Everything else can be installed, though a little bit more work (or configure UC), but at least only what I like. Not that an HTC Home, Weather, etc. is bad but that's my opinion
tyguy said:
Dont know what you are looking for exactly, I use this one on a stock AT&T ROM
screenshots and CAB attached.
Click to expand...
Click to collapse
I thought this was what I was looking for... but it does not have a Speed Dial button... what gives?
Please tell me that you are kidding! Set speed dial up in the options and LOONG press the number. 1 is voicemal per default.
Edit:
It's "menu" (right softkey) - speeddial in case you are lost...
Honestly, did not know that worked... thank you!
I noticed that in the Diamond forum Dutty has embedded MSVC 1.6.19971 into his ROM.
Any ideas where I can find the installation CAB for this?
alanplum said:
I noticed that in the Diamond forum Dutty has embedded MSVC 1.6.19971 into his ROM.
Any ideas where I can find the installation CAB for this?
Click to expand...
Click to collapse
I'm using MSVC_US_PPC_1.6.19214 which is working fine. You can find this in one of the threads in Kaiser but I believe it was taken down for an unknown reason (the thread still exists but the first 5 message and topic title was deleted). The title was something like "The Definitive Guide to MSVC". You can still get it in google cache though
pfcsabre said:
I'm using MSVC_US_PPC_1.6.19214 which is working fine. You can find this in one of the threads in Kaiser but I believe it was taken down for an unknown reason (the thread still exists but the first 5 message and topic title was deleted). The title was something like "The Definitive Guide to MSVC". You can still get it in google cache though
Click to expand...
Click to collapse
We removed the MSVC cab because it is a retail sold program, YES it was put into some official ROMs but after a LONG debate we decided to not allow it in cooked ROMs etc... just such a grey area we didnt want M$ finding another reason to have a go at xda-devs.
i had a feeling it will be taken out eventually, curiously though i was thinking why the guy was banned
MS Voice Command 1.6 German
Hello Guys ...
I read much about MS VC 1.6 cause Cyberon Voice Speed Dial
doesn´t work well in German - and would like to test it now.
Could someone please provide a download link?!
Thanks!
mr.right67 said:
Hello Guys ...
I read much about MS VC 1.6 cause Cyberon Voice Speed Dial
doesn´t work well in German - and would like to test it now.
Could someone please provide a download link?!
Thanks!
Click to expand...
Click to collapse
Have you read post #3? MSVC is a retail sold program, if you want it please buy it.
Hey guys, on my fuze with the at&t rom, MSVC was included, now that i've upgraded to romeos rom and it's not included on his rom! i know that you guys are saying its a pay program, but i paid for it when i bought the fuze (as its included in the price).... and i really dont wanna pay for it again...
Does MSVC integrate and work with the fuze over bluetooth? I know that it needed several mods to work with both the 8525 and the Tilt.
Thanks
it worked perfectly with the at&t rom without any mods at all. and actually after i posted, i realized that i still had the copy that i had download from this site for my tilt. i installed it and it works perfectly once again
omaralt said:
it worked perfectly with the at&t rom without any mods at all. and actually after i posted, i realized that i still had the copy that i had download from this site for my tilt. i installed it and it works perfectly once again
Click to expand...
Click to collapse
Does it announce incoming calls over the bluetooth headset? I can't get it to do that. My Tilt did it just fine and I have the Fuze VC set up exactly the same way as my Tilt, but all I get is my ringtone and no announcement.
Any ideas?
jglev said:
Does it announce incoming calls over the bluetooth headset? I can't get it to do that. My Tilt did it just fine and I have the Fuze VC set up exactly the same way as my Tilt, but all I get is my ringtone and no announcement.
Any ideas?
Click to expand...
Click to collapse
I'm sure this is a dumb question but did you double-check the settings? (Start -> Settings -> Personal -> Voice Command -> [Highlight Phone] -> Options -> Announce Incoming calls) and (Start -> Settings -> Personal -> Voice Command -> Notifications Button)
ITNV said:
I'm sure this is a dumb question but did you double-check the settings? (Start -> Settings -> Personal -> Voice Command -> [Highlight Phone] -> Options -> Announce Incoming calls) and (Start -> Settings -> Personal -> Voice Command -> Notifications Button)
Click to expand...
Click to collapse
Yes. I wish it were that easy. As I said, all parameters are set up exactly like my Tilt which worked perfectly. With the Fuze, I only get my ringtone. Now, I know that the Fuze has a newer version of VC, so I may try to downgrade to the version that is on my Tilt.
omaralt said:
Hey guys, on my fuze with the at&t rom, MSVC was included, now that i've upgraded to romeos rom and it's not included on his rom! i know that you guys are saying its a pay program, but i paid for it when i bought the fuze (as its included in the price).... and i really dont wanna pay for it again...
Click to expand...
Click to collapse
I'm wondering the same thing. Stock Fuze had MSVC, and I flashed to the Elite ROM, and would like MSVC back. Is there any way to flash my Fuze back to stock rom, and pull the cab file out of it??
Unless you can tell me otherwise, the one that comes with the FUZE is defective. Partly... A few of us can't get it to say the incoming caller name or number. All you hear is a bell sound. I've gotten everything else to work like dialing from the headset, even where it says I have an appointment on my BT headset. Just for the announcement of whos calling doesnt work.
Do you have to have the handsset connect to juse VOice C`?
I pulled VC 1.6.19971 out of the AT&T Fuze ROM and included it in my personal ROM and I was able to enable "Announce incoming calls".
On my Nokia BH-501 headset, it begins to announce the call, but gets cut off by the built in headset ringtone. (I only use this stereo headset for music)
On my Oakley Razrwire it works just fine. With 'announce' turned off, the headset uses it's normal built-in ringtone. With 'announce' turned on, I get the VM announcement with my WM ringtone playing in the background (it opens an audio stream from the phone). I use this headset while driving, so it's all good.
Well well... depends on your MSVC-version. 1.6.4622 DOES NOT announce any incoming call regardless of the setting.
1.6.17913 does, 19209, 19213, 19214 does...
By the way: the ultimate FAQ was named The Definitive Guide for Microsoft Voice Command - I posted a backup in another thread.
anyhow, does anyone know the advantages of 1.6.19971 ? Does it report anonymous callers correctly (which none of the above does?)
And why is it that anyone wants to use newer versions without even knowing changes? Maybe it's a beta version, maybe it's buggy... but it's a newer release... using legal german retail (bought it) .4622 with 19209 exe for announcing reasons. Works brilliant on raphael.
But maybe someone knows a list of changes or fixes, advantages or disadvantages in 19971?
I would really like cyberon voice dial 1.2 to work on the fuze but when i press the bluetooth headset it does not work, i have searched but can't find what the reg edits need to be. thanks for any help one can provide me
irus said:
I would really like cyberon voice dial 1.2 to work on the fuze but when i press the bluetooth headset it does not work, i have searched but can't find what the reg edits need to be. thanks for any help one can provide me
Click to expand...
Click to collapse
Before or after installing cyberon? - After: Unpairing headset, repair and watch out having it set as default handsfree headset
HTH
MSVC in Dutch?
Hello all:
Is MSVC available in the Dutch language? Its kind of weird hearing my Dutch contacts' names pronounced in English. Funny, but still weird...
Driver posted below is only for X1. Don't install it on other devices!!!
Don't know where should I post it, but I think it is more suitable for ROM Dev forum.
Everyone who tried to record calls on X1 knows that our phone records only YOUR voice,
and you hear your friend's voice badly. Driver posted below fixes this problem.
Installing:
0) Full backup (use SPB Backup, for example)! I don't take any responsibility for broken phones!
1) Install driverwiz_2wayrecording.cab
2) Soft-Reset
After that you'll get "Record" menu item during calls, also you will be able to use third party recorders like Resco Audio Recorder, Vito Audio Notes and so on.
Quality isn't as great as when you record only one line, but it is much better than it was before.
You are free to use this driver in your ROM if:
1) post a link to this topic and write a little patch's description in one of the first posts of your topic.
2) write author's nickname ("ultrashot" )
UPD (5th of september):
Added cab made by DriverWiz util, with it you don't have to install NewSDKCerts.cab, so it means less problems with certificates.
7th of september:
deleted old cab and certs, use only driverwiz created one.
v1.2:
http://forum.xda-developers.com/showpost.php?p=8434567&postcount=44
Wow, it's a new and fresh driver for record. Great to UltraShot. (Is it the same name on s*nse??)
dna_voluntatis said:
Great to UltraShot. (Is it the same name on s*nse??)
Click to expand...
Click to collapse
yes, that's me
Cool! Thanks for sharing bro !
ultrashot said:
yes, that's me
Click to expand...
Click to collapse
Wooow, it's a nice to see you in these thread, You're my Fav Master (Many thanks for the ELF)
Oops, seems vulcan dialer can't record at all...
Ethermind, download Resco Audio Recorder or Vito Audio Notes, they can record.
anyone using energy rom tested this driver yet? please specify your rom and version used to test this driver. I'm going to backup my energy rom b4 test this one now thnks ultrashot
Ethermind said:
Oops, seems vulcan dialer can't record at all...
Click to expand...
Click to collapse
Same to me, my X2 didn't have any audio when install this sdk.
yesternova, it is only for X1, that's why it is posted in X1 section.
Ethermind means that vulcan's dialer doesn't have "record" button in dialer (he tests it on X1)
No sound on my X1, stock ROM R3 hixx
womanizerzz said:
No sound on my X1, stock ROM R3 hixx
Click to expand...
Click to collapse
Have you installed NewSDKCerts.cab? No sound (on x1) means certificate problem.
However I haven't tried it on stock ROM, only on ROM without certificate checking.
Thanks. I can finally record.
little update:
added cab made by DriverWiz utility, it should install better and more reliably on stock roms.
Thank you. My phone was ok with new cab, I dunno why i had problem with installed sdkcert.cab
ultrashot this is awesome! Unfortunately for me a bit to late as I have moved from the X1.
2-way-In Call for X1/plz specify engines for which these drivers are!...
Hello,
onto my Leo HD2 these drivers caused a complete fail of sounds, even phone didn't ring any more. So I had to perform a hard-reset, thus wasting my time. Fortunatedly Iade a complete system-backup before installing these not-functionning drivers. Please be so kind to tell in future, for which phones your drivers are written for. Thanks!! Inuli
inuli said:
Hello,
onto my Leo HD2 these drivers caused a complete fail of sounds, even phone didn't ring any more. So I had to perform a hard-reset, thus wasting my time. Fortunatedly Iade a complete system-backup before installing these not-functionning drivers. Please be so kind to tell in future, for which phones your drivers are written for. Thanks!! Inuli
Click to expand...
Click to collapse
That's completely your fault!!! Didnt you see the tittle say "[DRIVER] 2-Way In-Call recording on X1" ????
On HD2 you dont need to modify the driver, just add this key and it should work!
[HKLM\Drivers\BuiltIn\WaveDev]
MixModeRecord=1
Thanks, I have tested and it works on Laurenti's ROM.
Work on Jack's 5.x ROM too. Any idea how to decrease a little bit the other party voice level? It is recorded way to loud with too much distortions leaving no room for my voice. It's like 130% with 70% ! Maybe a tweak in registry or something? Thanks!