Database Develop

How to flash Custom Rom

I made a Custom rom but can't get it to flashe on my Breeze. I use de Special ruu listed in the wiki but when i start it the phone wil go off and won't go in to bootloder mode. Can some one outline step by step what to do. because i want to learn cocking. And when i master the cocking skills cocking a Wm6 rom.
I read the wiki so please step by step

I have the same truble, when i start flashing, the phone wil go off and won't go into bootloder mode(i did all that was in first post in theme "Htc Breeze Test Sspl"). I try to use HTC_Hermes_SIM_CID_Unlock_v3a but the same truble(i have the last HTC ROM; ipl 1.00; spl 1.10). sdamion, can you upload your Custom ROM somewhere i want to test it?
P.S. Please outline step by step manual(if i've done smth wrong).

Sergey55555 said:
I have the same truble, when i start flashing, the phone wil go off and won't go into bootloder mode(i did all that was in first post in theme "Htc Breeze Test Sspl"). I try to use HTC_Hermes_SIM_CID_Unlock_v3a but the same truble(i have the last HTC ROM; ipl 1.00; spl 1.10). sdamion, can you upload your Custom ROM somewhere i want to test it?
P.S. Please outline step by step manual(if i've done smth wrong).
Click to expand...
Click to collapse
I first want to test it my self i only have the dutch mui files and removed al MSN live stuf en the streaming media. But before i can upload it i want to test it myself.
go to this treat http://forum.xda-developers.com/showthread.php?t=306165. I get the spl by des so i will try flashing my custom rom

Format a fresh microSD card, copy on the rom you want to test (best just ROM only!) and rename to breeimg.nbh, start the SSPL variant posted in this forum and then quickly enter bootloader (power/camera).
Works a treat, as stated in post 5 of the thread you quoted. I've flashed umpteen Cavalier Rom variants this way, all followed by the inevitable re-flash back to 1.34

darrellr said:
Format a fresh microSD card, copy on the rom you want to test (best just ROM only!) and rename to breeimg.nbh, start the SSPL variant posted in this forum and then quickly enter bootloader (power/camera).
Works a treat, as stated in post 5 of the thread you quoted. I've flashed umpteen Cavalier Rom variants this way, all followed by the inevitable re-flash back to 1.34
Click to expand...
Click to collapse
It works now i am runing a rom without streaming media and Clear vue word powerpoint pdf reader. But i cant edit the register. I can't convert my default.reg and user.reg to a .hv file. So the files are deleted but the registry entries are still there. So im playing around

Finally got the time to have a fiddle around and found an alternative, but probably slower, approach to the SDcard route.
Basically instead of the standard RomUpdateUtility.exe that comes with the 1.34 package I used the modified Hermes flasher RUUwrapper and chose the force SSPL option.
Once the Breeze is in SSPL (execute SPL shortcut file + press power/camera IMMEDIANTLY) it is possible to run the RUUWrapper on my laptop and it will flash whatever signed/unsigned nbh file that is local to it.

problem upgrading to WM6

does anyone know why my imate kjame would give an error or Windows/autoconfig.exe doesnt exist.
i have tried a number or roms but the phone failed to upgrade to wm6. it then reverts back to the wm5 after encounting this error.
i have tried the CID unlock but there is no hope
can anyone please assist me urgently.

ghumanfly said:
does anyone know why my imate kjame would give an error or Windows/autoconfig.exe doesnt exist.
i have tried a number or roms but the phone failed to upgrade to wm6. it then reverts back to the wm5 after encounting this error.
i have tried the CID unlock but there is no hope
can anyone please assist me urgently.
Click to expand...
Click to collapse
We need more information than this if you want help...
1. Wireless Carrier?
2. IPL/SPL?
3. Roms tried?
4. How have you been trying to flash roms? What method of flashing?
5. What is your PC's operating system(your computer, not PPC)
EDIT>> Answer these questions for me and I will try my best to help you tomorrow some time. I live in Cental US so I might not get your messages until later tomorrow your time but I will respond in the morning tomorrow.

info
forgive me if there is anything that i dont get correct....
1. Wireless Carrier?
i am assuming that this is the service provider and that is vodacome for me. it is a not the same as vodafone however they have a JV running
2. IPL/SPL?
IPL - 2.16.0001
SPL - 2.16.0001
rom version - 2.16.9.1
radio - 02.07.10
extROM - 2.16.9.101
OS - WM5
3. Roms tried?
i tried one of the ROMs that my IT team provided to me. i have attached the rom.
i also tried Octvio's rom (ROM_Wizard_OCTAIVOI_OS_1908_v4[1].8_PP6MB)
i also tried CB-AIRAF
4. How have you been trying to flash roms? What method of flashing?
here i loaded the EnableRapi cab file and ran it on my wizard. then i ran the lokiwiz.bat file on my machine. i didnt see any error there so i take it that it ran fine.
5. What is your PC's operating system(your computer, not PPC)
i am running XP SP2 on my notebook.

couldnt attach any of the files... not sure what was causing the problem

ghumanfly said:
forgive me if there is anything that i dont get correct....
1. Wireless Carrier?
i am assuming that this is the service provider and that is vodacome for me. it is a not the same as vodafone however they have a JV running
2. IPL/SPL?
IPL - 2.16.0001
SPL - 2.16.0001
rom version - 2.16.9.1
radio - 02.07.10
extROM - 2.16.9.101
OS - WM5
3. Roms tried?
i tried one of the ROMs that my IT team provided to me. i have attached the rom.
i also tried Octvio's rom (ROM_Wizard_OCTAIVOI_OS_1908_v4[1].8_PP6MB)
i also tried CB-AIRAF
4. How have you been trying to flash roms? What method of flashing?
here i loaded the EnableRapi cab file and ran it on my wizard. then i ran the lokiwiz.bat file on my machine. i didnt see any error there so i take it that it ran fine.
5. What is your PC's operating system(your computer, not PPC)
i am running XP SP2 on my notebook.
Click to expand...
Click to collapse
Ok I see that you have a G4. Lokiwiz is a waste of your time since you have a G4.
Here is what you need to do:
Because you have a G4, you can't just flash a rom because of the DOC chip.
There are 3 ways I know of to flash a G4.
1. Download shelltools - install enablerapi.cab and cert_spcs.cab and reboot your device. connect with activesync and place the nk.nbf file of the rom of your choice in the shelltools directory and run shelltools and follow the directions in the readme. If you do it correctly, you will end up successfully flashing your device.
Link: http://forum.xda-developers.com/showthread.php?t=293480
2. Download SoftSPL and place the nk.nbf file of your choice in the RUU folder included and run SoftSPL and it is fully automated. It will call the RUU and your device will be flashed in about 7 minutes.
Link: http://forum.xda-developers.com/showthread.php?t=329147
3. Use the HardSPL(CID UNLOCK) and unlock your device prior to flashing. This will allow you to just flash roms at your leisure with no problems whatsoever from now on BUT it is still in developement so use at your own risk.
LINKS: http://forum.xda-developers.com/showthread.php?t=332330
http://forum.xda-developers.com/showthread.php?t=332320
I hope this helps you. I personally have a G3 so this is not my area of expertise...

wm6
thanks alot me. it upgraded properly
i am trying get all add ons.

ghumanfly said:
thanks alot me. it upgraded properly
i am trying get all add ons.
Click to expand...
Click to collapse
No problem... Now you're at the fun part. Add ons!!

add ons
when it comes to add ons,I was reading on the Rom Kitchen thread and and I couldn't see much more that could be added to the rom that Faris V5's nbf file.it seems to be one of thee most comprehensive files that I have come across. the only issue is that it runs a bit slow but it cool.I might just need to do some memory management.
other than that I would recommend the file.
do you have any other recommendations?
have u seen the article that microsoft wants xda dev... to remove all of its roms from the website?

ghumanfly said:
when it comes to add ons,I was reading on the Rom Kitchen thread and and I couldn't see much more that could be added to the rom that Faris V5's nbf file.it seems to be one of thee most comprehensive files that I have come across. the only issue is that it runs a bit slow but it cool.I might just need to do some memory management.
other than that I would recommend the file.
do you have any other recommendations?
have u seen the article that microsoft wants xda dev... to remove all of its roms from the website?
Click to expand...
Click to collapse
I personally use the TNT.1437 TouchFlo and TNT.1437 Professional+HTC Home roms personally modified to have a 10MB page pool. They are quite fast and are almost 100% stable with only minor bugs that are barely noticible...
Here is a link to the 10MB Version of TNT.1437 Touchflo
http://www.megaupload.com/?d=TM2N1W2R
Here is a link to the 10MB Version of TNT.1437 Prof+HTC Home
http://www.megaupload.com/?d=RZFKY868
If you would like, I can speed up the performance of faria's rom also and then upload the new nk.nbf file for you to try. Just let me know.

speed
Yes, please.... speed it up for me. if there are any other applications (add ons) that you feel should be added to the nbf file then please add them.
i have already shared the nbf file with many guys at work. we would be grateful if you can assist.
one last thing, i noticed that there is a 3G icon under the comms manager. one of the guys said that we should not have any issues accessing 3G even if the phone didnt come with it. is it possible to use 3G on these phones?

cmd> prompt when i use mtty
--------------------------------------------------------------------------------
hi,
i;ve managed 2 screw up my wizard
everything was going well
i flased sucessfully 2 three different roms..
then i flased the tnt latest beta rom
i worked fine
i reflased the same rom by mistake as i wanted 2 flash a diferent rom
this is when the problem sarted..
the upgrade got stuck at 66%
i waited for 15 minutes..
then i disconnected the usb from the phone & since then the phones stuck in the bootloader..
i've used mty
this is where i'm in unknown teritory..
it gives me cmd> prompt
no USB prompt..
any sugestions??

HELP: Flashing CHT9110 (P3600i)

I really need all the expert out there to help me on flashing my CHT9110. I'm not sure if flashing CHT9110 is the same as flashing P3600i?
Anyway there is an instruction post by ajajaj and credit to Olipro for the great help. I follow every step stated by ajajaj but still I couldn't get my phone flash to WM6.1, therefore I'm pleading for help here.
Step 1 - Anyway First of all, load the Hard SPL to your phone from : http://forum.xda-developers.com/showthread.php?t=398742
Click to expand...
Click to collapse
From my understanding I need to download the Hard SPL, but what does it mean by load the Hard SPL to your phone? Does it mean I unzip the hard spl and double click ROMUpdateUtility.exe on my PC? I tried to double click anyway and my phone boot to tri-color mode, there my phone get disconnected, doesn't matter I press power, camera button, and push the reset button and my phone start in tri color, again I run the ROMUpdateUtility.exe and this time it run and finish 100% but after that it return an Error[270] Image corrupted.
Then I ignore this first step and proceed to following steps
Step 2 - So, what I did was to download RUU_TRINITY_WM6.1_WWE_ASIA_3.12.YK.Lite extract into its own folder (Mary seems to work as well)
Click to expand...
Click to collapse
Yes I downloaded
Step 3 - then download the custom ruu updated from here: http://forum.xda-developers.com/showthread.php?t=295113 - also get the rombaker for trinity as found further down in the post.
Click to expand...
Click to collapse
Also downloaded
Step 4 - unzip the custom_ruu stuff, put in the downloaded trinity rombaker to replace extracted rombaker,
Click to expand...
Click to collapse
I unzip the rombaker and custom ruu. I overwrite the rombaker into custom ruu/workshop folder
Step 4a - Copy ruu_signed.nbh file that is found in folder created in Step 2 to the rombaker/workshop folder created in step 4
Click to expand...
Click to collapse
I copy the ruu_signed.nbh from WWE_ASIA folder to custom ruu/workshop
Step 5 - then use nbhextract (created in step 4) to extract the ruu_signed.nbh file that is now in the workshop folder
Step 6 - watch the output. (for file names)
Click to expand...
Click to collapse
I extract it and get 00_OS.nb as output
Step 7 - Run the rombaker program and load the extracted files into their places (as referred to in step 6), then click generate NBH
It will ask you to save a file. call it new_nbh (or whatever you want) -
Click to expand...
Click to collapse
I run the rombaker and I fill IPL, SPL, OS, ExtROM, GSM, SubSplash, MainSplash with 00_OS.nb and name the file called new_nbh. So I get new_nbh.txt as the output.
Step 8 - open this file (created in step 7) in notepad, and change the number 400 (about 5 lines down) to 401 save and exit
Click to expand...
Click to collapse
I open with text editor and change the last line to 401 from 400 as below
TRIN100
SuperCID
ROMBaker
XDADevelopers
100,00_OS.nb
200,00_OS.nb
600,00_OS.nb
601,00_OS.nb
900,00_OS.nb
300,00_OS.nb
401,00_OS.nb
Step 9 - then open a dos/cmd/command.com window (whatever you want to call it), cd to the rombaker/workshop folder and then run the following:
nbhgen new_nbh.txt
NOTE: new_nbh.txt should be the same as the filename created in step 7
Click to expand...
Click to collapse
I did exactly been instructed here
copy the generated RUU_signed.nbh file back to the RUU_TRINITY_WM6.1_WWE_ASIA_3.12.YK.Lite folder.
Your p3600i rom is now ready for flashing
Click to expand...
Click to collapse
I copy the ruu_signed.nbh from workshop folder back to RUU_TRINITY_WM6.1_WWE_ASIA_3.12.YK.Lite folder and run the ROMUpdateUtility.exe
After all the next next thingy, it turn black and doesn't go into the tri color. Tried to push power, camera, and reset button and boot in tri color, run the ROMUpdateUtility.exe again it stop at 1%
Can anyone tell me where I went wrong?
Thank and appreciate all your help.

wssoo said:
I really need all the expert out there to help me on flashing my CHT9110. I'm not sure if flashing CHT9110 is the same as flashing P3600i?
Anyway there is an instruction post by ajajaj and credit to Olipro for the great help. I follow every step stated by ajajaj but still I couldn't get my phone flash to WM6.1, therefore I'm pleading for help here.
From my understanding I need to download the Hard SPL, but what does it mean by load the Hard SPL to your phone? Does it mean I unzip the hard spl and double click ROMUpdateUtility.exe on my PC? I tried to double click anyway and my phone boot to tri-color mode, there my phone get disconnected, doesn't matter I press power, camera button, and push the reset button and my phone start in tri color, again I run the ROMUpdateUtility.exe and this time it run and finish 100% but after that it return an Error[270] Image corrupted.
Then I ignore this first step and proceed to following steps
Yes I downloaded
Also downloaded
I unzip the rombaker and custom ruu. I overwrite the rombaker into custom ruu/workshop folder
I copy the ruu_signed.nbh from WWE_ASIA folder to custom ruu/workshop
I extract it and get 00_OS.nb as output
I run the rombaker and I fill IPL, SPL, OS, ExtROM, GSM, SubSplash, MainSplash with 00_OS.nb and name the file called new_nbh. So I get new_nbh.txt as the output.
I open with text editor and change the last line to 401 from 400 as below
TRIN100
SuperCID
ROMBaker
XDADevelopers
100,00_OS.nb
200,00_OS.nb
600,00_OS.nb
601,00_OS.nb
900,00_OS.nb
300,00_OS.nb
401,00_OS.nb
I did exactly been instructed here
I copy the ruu_signed.nbh from workshop folder back to RUU_TRINITY_WM6.1_WWE_ASIA_3.12.YK.Lite folder and run the ROMUpdateUtility.exe
After all the next next thingy, it turn black and doesn't go into the tri color. Tried to push power, camera, and reset button and boot in tri color, run the ROMUpdateUtility.exe again it stop at 1%
Can anyone tell me where I went wrong?
Thank and appreciate all your help.
Click to expand...
Click to collapse
First up you are way ahead of me in getting to the stage where you have been able to modify the nbh, well done.
I am not sure this ROM works even after being modified, but you can give it a go.
To flash the modified ROM.....first put your phone into bootloader mode...ie camer..power and soft reset. It should come up with the tri-colour screen and show SPL Olipro 3.2. something. If it doesnt show Olipro then the Hard SPL you did earlier didn't work.
If it does...connect back to your PC via the USB cable and then run ROMupdate. It will then go through and flash the phone.
All the others have said this ROM flashes and then hangs at the boot screen.
Good luck...let us know how you go.

don't use that ROM... it doesn't work
go HERE to see the ROMs that have been tested and work with the P3600i
there's only 2 (tested) ones there, but at least they work
if those ROMs don't work, i don't know what will - i've tested both myself and they work fine
like andych said, make sure your bootloader (3 colour screen) says Olipro 3.2 on it, to make sure you have HardSPL... otherwise you haven't put that on yet - if you haven't do it again, then flash with a ROM from the link i gave

If I run the ROMupdate when I'm in WM it show
TRIN100
IPL-1.00
TRIN100
SPL-olipro 3.20
But if I boot into the bootloader mode, and I see
TRIN100
IPL-1.00
TRIN100
SPL-3.03.0000
am really confused on how to go about it

joncgde2 said:
don't use that ROM... it doesn't work
go HERE to see the ROMs that have been tested and work with the P3600i
there's only 2 (tested) ones there, but at least they work
if those ROMs don't work, i don't know what will - i've tested both myself and they work fine
like andych said, make sure your bootloader (3 colour screen) says Olipro 3.2 on it, to make sure you have HardSPL... otherwise you haven't put that on yet - if you haven't do it again, then flash with a ROM from the link i gave
Click to expand...
Click to collapse
I just wanna be sure, with the 2 given ROM, I need not do any changing of 400 to 401, and etc? Just run the ROMupdate and everything will run smoothly?

OK
You need to run Hard SPL again.
Connect to your PC and make sure activesync has run properly and your phone is on.
Open Hard SPL and run the ROMupdate. Your phone will go to tricolour and it will come up with a communication error.
disconnect from PC but leave the phone in tricolour....DO NOT reset it.
Cancel our of the ROMupdate. connect the phone to the pc again and run ROMupdate again.
This time it will go all the way through and you will have HardSPL on your phone.
Check it by entering bootloader and it should show Olipro 3.2.
You can then flash away....make sure you always put the phone into bootloader before flashing.
Let us know how you go.

Ok once I get communication error, I disconnect from PC, cancel the ROMUpdate, then I reconnect to my PC again.
This time do I run the Hard SPL or the rom from ajajaj?
I tried both it however reset my phone to tri color and I dont see olipro 3.2 anymore

wssoo said:
Ok once I get communication error, I disconnect from PC, cancel the ROMUpdate, then I reconnect to my PC again.
This time do I run the Hard SPL or the rom from ajajaj?
I tried both it however reset my phone to tri color and I dont see olipro 3.2 anymore
Click to expand...
Click to collapse
You need to run the ROMupdate from HardSPL again......
Only when you have Olipro 3.2 on the bootloader can you run the ajajaj ROM.

Guess it is really giving me a big headache.
Here is my scenario
My phone is on, I connect to activesync and run harl spl romupdate
My phone boot into tri color mode with SPL-3.10.olipro
Then I get error ERROR[260]: Connection
I exit
Disconnect phone from PC
Now comes the part that seems like only I'm the one facing problem.
I connect my phone back to my pc. My phone still in tri color mode I still see SPL-3.10.Olipro
Now I run the romupdate for hard spl again
I see the loading bar but I'm stuck at 0%, then my phone restart and reboot in tri color, now I see SPL-3.03.0000
Alright fine, I reboot on my phone connect to pc run hard spl romupdate till I get Connection error. Now I close romupdate and disconnect from PC.
I reconnect and run the ROM Mary instead. Again failed.
Did I miss any step? Or those are for P3600i and not CHT9110? Any different?

wssoo said:
Now comes the part that seems like only I'm the one facing problem.
I connect my phone back to my pc. My phone still in tri color mode I still see SPL-3.10.Olipro
Now I run the romupdate for hard spl again
I see the loading bar but I'm stuck at 0%, then my phone restart and reboot in tri color, now I see SPL-3.03.0000
Click to expand...
Click to collapse
That's odd. I did what you did - I tried the first time, it failed with the 260 error. I kept the phone in bootloader, disconnected it from the PC, exited and restarted the HardSPL flashing program, and put my phone back in WITH the bootloader still on after that error the came up.
This second time, it worked for me.
If what I have just described does not occur with you, then you cannot flash any ROMs. You MUST succeed with HardSPL first. I don't know what is going wrong for you, I'm sorry Are you using Vista? I only tried on XP.
Also! Watch the screen of your phone the first time you try it from activesync, and make sure security dialogues come up and you approve them. I had to allow them ro proceed.

joncgde2 said:
That's odd. I did what you did - I tried the first time, it failed with the 260 error. I kept the phone in bootloader, disconnected it from the PC, exited and restarted the HardSPL flashing program, and put my phone back in WITH the bootloader still on after that error the came up.
This second time, it worked for me.
If what I have just described does not occur with you, then you cannot flash any ROMs. You MUST succeed with HardSPL first. I don't know what is going wrong for you, I'm sorry Are you using Vista? I only tried on XP.
Also! Watch the screen of your phone the first time you try it from activesync, and make sure security dialogues come up and you approve them. I had to allow them ro proceed.
Click to expand...
Click to collapse
acutally i want to ask after successfully update the hardspl
what number will show?
3.10 or 3.20
mine is 3.20
so strange, but i still can flash to mary rom

joncgde2 said:
That's odd. I did what you did - I tried the first time, it failed with the 260 error. I kept the phone in bootloader, disconnected it from the PC, exited and restarted the HardSPL flashing program, and put my phone back in WITH the bootloader still on after that error the came up.
This second time, it worked for me.
If what I have just described does not occur with you, then you cannot flash any ROMs. You MUST succeed with HardSPL first. I don't know what is going wrong for you, I'm sorry Are you using Vista? I only tried on XP.
Also! Watch the screen of your phone the first time you try it from activesync, and make sure security dialogues come up and you approve them. I had to allow them ro proceed.
Click to expand...
Click to collapse
Well I've tried. The only way for me to accomplish 100% on bootloader is when my phone show SPL-3.02.0000, if I run hard spl romupdate at this point of time, it will complete 100% but sadly after that, it return
ERROR[270]: Update Error
The image file is corrupted. Please check your Update Utility

wssoo said:
Well I've tried. The only way for me to accomplish 100% on bootloader is when my phone show SPL-3.02.0000, if I run hard spl romupdate at this point of time, it will complete 100% but sadly after that, it return
ERROR[270]: Update Error
The image file is corrupted. Please check your Update Utility
Click to expand...
Click to collapse
**Am using Windows XP SP2

i'm sorry, you seem to have a big problem with your phone :/
i don't think we can help you any further - hardspl to get into bootloader the first time, you get the error, you run the program again with the phone in bootloader and the hardspl should complete.
then you can soft reset and it should have 3.20 olipro on the 3-colour screen.
if this doesn't work for you, maybe it won't work at all

wssoo said:
ERROR[270]: Update Error
The image file is corrupted. Please check your Update Utility
Click to expand...
Click to collapse
Which Ruu Update utility did U use? 3.1.3.2 or 3.14.4.1? If you use the one that came with hard-SPL, try using the 3.14.4. U can get this here http://forum.xda-developers.com/showthread.php?t=321182 extract this then change the RUU_signed.nbh with the hard-SPL one, then flash your device as described above.

Argyle0297 said:
Which Ruu Update utility did U use? 3.1.3.2 or 3.14.4.1? If you use the one that came with hard-SPL, try using the 3.14.4. U can get this here http://forum.xda-developers.com/showthread.php?t=321182 extract this then change the RUU_signed.nbh with the hard-SPL one, then flash your device as described above.
Click to expand...
Click to collapse
I'm using the default ruu_signed.nbh that come along with Hard SPL. Unsure what version it is. Anyway I downloaded RUU_TRINITY_WM6.1_WWE_ASIA_3.12.YK.Lite.rar from the net too? Is this you are talking about? I overwrite the ruu_signed.nbh to Olipro's Hard SPL ruu_signed.nbh?

wssoo said:
I'm using the default ruu_signed.nbh that come along with Hard SPL. Unsure what version it is. Anyway I downloaded RUU_TRINITY_WM6.1_WWE_ASIA_3.12.YK.Lite.rar from the net too? Is this you are talking about? I overwrite the ruu_signed.nbh to Olipro's Hard SPL ruu_signed.nbh?
Click to expand...
Click to collapse
Download the RUU_Trinity_DOPODASIA_WWE_3.00.707.18_6275_1.46.30.11_108_Ship.exe then right click to extract (winrar installed). You should see a some files in the directory you extracted to. Find the RUU_signed.nbh, DELETE IT. Then copy the RUU_signed.nbh from the Hard-SPL to the above directory. Run the ROMUpdateUtility.exe.

Sadly I've tried Argyle0297 still getting the same old error msg.
I think it is lock on the SPL or SuperCID is it?

I know how frustrating it is .... this happened to me too.
BUT the one i got is not CHT9110, it's HTC P3600i with chinese rom installed (originally SPL-3.03.xxx). Maybe there's a difference between the two devices. Anyway if you want to give it another try, download the file below. It's the one i successfully used to flash the HardSPL.
Good Luck.

Argyle0297 said:
I know how frustrating it is .... this happened to me too.
BUT the one i got is not CHT9110, it's HTC P3600i with chinese rom installed (originally SPL-3.03.xxx). Maybe there's a difference between the two devices. Anyway if you want to give it another try, download the file below. It's the one i successfully used to flash the HardSPL.
Good Luck.
Click to expand...
Click to collapse
Thank.. am downloading it and will try it right away after work..
Crossing my finger..

P3600i Flashing Tutorial

OK first of all I've put this together hastily so forgive me for slight errors, but most of this should be fine.
To flash your P3600i, there are 3 things that should concern you: HardSPL, the Radio, and the ROM.
HardSPL: something that allows you to run unsigned code on your phone (e.g. ROMs), and also provides protection in case it screws up. This is the first thing you do. (This is probably a **** explanation, but functional at least?)
Radio: I guess more like a mini feature set, I know there was something similar when I had a Motorola phone which was called a flex. In this case it's not a whole new operating system, but perhaps easily thought of as small tweaks made to improve the system without necessitating a whole ROM flash. Why have a radio when a ROM could take care of everything? Well the advantage of a radio is that you can flash these without resetting everything. Everything (contacts, etc.) remain intact.
ROM: What you're really after, WM6.1 and the lovely cooked ROMs that should soon be available for flashing. This will wipe everything on your phone, so back your stuff up (contacts, settings, owner info, messages, etc.).
Flashing procedure:
IF YOU HAVE VISTA: You need to update your drivers. Go here for instructions. You can then proceed with the procedure as per normal.
The basic procedure is this. Flash HardSPL first, then update your Radio, then finally, your ROM.
Note: The HardSPL you use is a modified one especially for the P3600i. Get it here.
Note2: Here is a mirror for the latest Radio for the P3600i. From following the guides, you will know when to use it. Get it here. (N.B. Radio link updated to v1.56.70.11 - 2 Aug 2008)
Go to the trinityguides.info guide (link here) and go through the procedure - and yes, I know the link points to page 2 of the guide.
NOTE WHEN FLASHING HARDSPL, IT WON'T WORK THE FIRST TIME - YOU WILL GET AN ERROR (CODE 260) LOLOL. THIS IS EXPECTED.
This is what happens.
You go to flash HardSPL like the guide says. LOOK AT THE SCREEN ON YOUR PHONE, YOU MIGHT HAVE SECURITY PERMISSIONS AND NEED TO MANUALLY ALLOW THE PROGRAMS TO RUN.
It looks like it's about to flash and then errors. BUT your phone is on the 3-colour bootloader screen! How odd. Well KEEP YOUR PHONE ON THE BOOTLOADER SCREEN, and unplug it from your computer. Exit the HardSPL program, RUN IT AGAIN, and FLASH THE PHONE AGAIN WITH HARDSPL (obviously connect your phone and stuff back to your PC).
The point here is this: the first time it will fail, but at least manage to get the bootloader up. With this bootloader up, exit the flashing program, restart it, and then you should be able to run the flashing program and have it complete.
DOUBLE CHECK YOUR PHONE HAS THE OLIPRO HARDSPL INSTALLED after completion, by soft-resetting (hold the power and camera buttons at the same time AND use the stylus to press the putton at the bottom of the phone. You might not get it the first time, but with practice you'll get the hang of it).
Once you can see 3.20 Olipro (yes, 3.20) on the bootloader screen, you know you have HardSPL on fine, and can proceed to the trinityguides.info instructions on flashing your radio and ROM. ROMs can be found in the P3600i ROM Collection thread, here.
Hopefully this should answer a lot of questions people have

Hihi,
Because I am using Vista PC, can I use PC to flash the hardspl and use SD card to flash OS and radio??
Thank you
Best regards,
o_sing_o

o_sing_o said:
Hihi,
Because I am using Vista PC, can I use PC to flash the hardspl and use SD card to flash OS and radio??
Thank you
Best regards,
o_sing_o
Click to expand...
Click to collapse
Simple answer is no. You should be able to flash Hard SPL from Vista if you follow the Trinitty guides to change the USB drivers to the XP ones.....PLEASE read the TRINITY GUIDES as stated above.

about the vista problem ... take a look: http://trinityguides.info/index.php?option=com_content&task=view&id=20&Itemid=66

should i download the hard spl from here?
http://forum.xda-developers.com/showthread.php?t=398742
and what radio should i put? be specific...
Thanks

whatever radio you feel like, jesus, the level of stupidity just gets worse.
of course, if you're totally ****ing incapable of independent thought, we can spoonfeed you some arbitrary radio version.

Thanks for your attitude! I just want to do somethink that work... And my question is not for the fun! I saw in the guide that in the link (to trinityguide) and in the first page its didnt writen that is compatible with p3600i. So i ask before i make damage to my device.
I am working in computer companies for 5 years but its my first time flashing ppc so i want to be sure what to do before that I will make any damage.
And belive me that anyone that will gets some help in the first flash will help in the future to the forum.

gallevy said:
Thanks for your attitude! I just want to do somethink that work... And my question is not for the fun! I saw in the guide that in the link (to trinityguide) and in the first page its didnt writen that is compatible with p3600i. So i ask before i make damage to my device.
I am working in computer companies for 5 years but its my first time flashing ppc so i want to be sure what to do before that I will make any damage.
And belive me that anyone that will gets some help in the first flash will help in the future to the forum.
Click to expand...
Click to collapse
OK...you do not have to flash ANY radio if you don't want to.
The Tinity Guide was written well before this device was cracked so it is not up to day with regard to the P3600i.
If you follow the instructions at the top of the page you should be fine.
Chose whatever radio you want to use....then pick one of the ROM's that are known to work and away you go.
I just flashed the MARY 3.7 SL and before I started loading up my customisations my Program memory was 34 meg. Even now after laoding everything I have 22.62 Meg Program memory and 178.88 Sorage memory (and everything is loaded on the device too).
So far all is good on this one.
PS Don't take Olipro's comments to heart....if you read his tag...he abuses everyone....lol

Andych said:
OK...you do not have to flash ANY radio if you don't want to.
The Tinity Guide was written well before this device was cracked so it is not up to day with regard to the P3600i.
If you follow the instructions at the top of the page you should be fine.
Chose whatever radio you want to use....then pick one of the ROM's that are known to work and away you go.
I just flashed the MARY 3.7 SL and before I started loading up my customisations my Program memory was 34 meg. Even now after laoding everything I have 22.62 Meg Program memory and 178.88 Sorage memory (and everything is loaded on the device too).
So far all is good on this one.
PS Don't take Olipro's comments to heart....if you read his tag...he abuses everyone....lol
Click to expand...
Click to collapse
Thanks... what radio you tried?
And The hard spl you take from here? http://forum.xda-developers.com/showthread.php?t=398742 or from the trinityguides?

gallevy said:
Thanks... what radio you tried?
And The hard spl you take from here? http://forum.xda-developers.com/showthread.php?t=398742 or from the trinityguides?
Click to expand...
Click to collapse
Use the Hard SPL from the link...that is THE only one that works.
Radio 1.46.30 was the standard Radio and I now have 1.50.08.11
Check out the radios etc here http://forum.xda-developers.com/showpost.php?p=1951469&postcount=3
and choose the one that suits.

woot it works! thanks

zero_1984 said:
woot it works! thanks
Click to expand...
Click to collapse
good to hear
hopefully we'll have a decent selection of ROMs after a few weeks, would be good to check back in a little while

joncgde2 said:
good to hear
hopefully we'll have a decent selection of ROMs after a few weeks, would be good to check back in a little while
Click to expand...
Click to collapse
great to hear. the rom seems to be fairly stable, and its nice and quick. which for me personally is what i want in a phone
one thing i should mention to people as well running vista to do this is that for every part of flashing the phone, vista may attempt and succeed in "installing device drivers" which in turn means you need to point it to the vista-compatible drivers for it to work (as per the guide) every time to progress to the next part, otherwise a 260 keeps occuring.

Thank you for your wonderful and useful guide!
Thank you!
200% hype abt flashing! Finally!

Hey folks I need a little help
I've downloaded:
- Mary 3.7 Lite, Mary 3.7.1 and PDAVIET 37
- Olipro 130, Olipro 120 and Des Crash Proof
I've tried hard to mix all possibilities like Olipro 130 and Mary 3.7, Olipro 130 and Mary 3.7.1 and etc
After several tries i was kinda desperate since none worked then after testing Mary 3.7.1 and Des Crash Proof, TADA! Worked!
Well, the point here is understanding why I couldnt make the other ROMs work.
Could you please help me understading why?
Also I have another question, when a ROM was bad installed, in these cases above the 0% stats were freeze in the PDA while I had a bad connection problem showing in computer ( error 246 i think ) so the PDA was stuck in the bootloader mode =( And I just could enter my old WM6 by upgrading the radio. Is there another way to do it? I was pretty disappointed upgrading the Radio so many times. LOL

genipao said:
Hey folks I need a little help
I've downloaded:
- Mary 3.7 Lite, Mary 3.7.1 and PDAVIET 37
- Olipro 130, Olipro 120 and Des Crash Proof
I've tried hard to mix all possibilities like Olipro 130 and Mary 3.7, Olipro 130 and Mary 3.7.1 and etc
After several tries i was kinda desperate since none worked then after testing Mary 3.7.1 and Des Crash Proof, TADA! Worked!
Well, the point here is understanding why I couldnt make the other ROMs work.
Could you please help me understading why?
Also I have another question, when a ROM was bad installed, in these cases above the 0% stats were freeze in the PDA while I had a bad connection problem showing in computer ( error 246 i think ) so the PDA was stuck in the bootloader mode =( And I just could enter my old WM6 by upgrading the radio. Is there another way to do it? I was pretty disappointed upgrading the Radio so many times. LOL
Click to expand...
Click to collapse
If you have a P3600i then according to the info you have above....you downloaded the WRONG Hard SPL.
Go back to the very first post on this thread and read it carefully. There is a link there to the correct Hard SPL from Olipro...and it isn't 130, 120 or Des Crash Proof.

genipao, it was rather surprise you had picked the wrong hard spl and doing some mix and match and it still work?

All experts,
please render help to me for my CHT9110 (P3600i - IPL-Trin100, SPL-3.03.0000, CPU-Samsung 500Mhz, NAND-256MB) that I flashed successfully with hardSPL 3.10 Oplira. this is working and wonderful SPL with the JumpSPL included. Good job done by Oplira!
However when I tried to upgrade P3600i from WM6.0 to WM6.1, I missed the step to tag 401 from 400 when I re-build New_NBH.file for my phone. At a result, I encounterd WM6.1 ROM flashing incomplete at 80% and forced to reset due to hang-up...
Now, my P3600i still can boot up to flash-screen logo, loading radio image (1.56.70.11) and then protocal services (32.89.7020.20H), then it will hand-up forever on flash screen logo.... (until i did the hard reset, then it will re-boot! terrible now!!)
i suspected it was unable to locate the WM6.1 and loading up accordingly....
I tried out many option, to downgrade SPL 1.1, SPL1.2, SPL 2.1 and used SPLxploit to clear the stack in bootloader... all is falied and my bootloader still shown SPL-3.03.0000 and don't allow to re-flash any ROM under bootloader mode now!!
Experts! please assist me,
How can I roll-back the default OS on phone if any? or there is alternative way to recover OS to flash in for recovery? I think firstly we need to crack SPL-3.03.000 in bootloader mode...
Many thanks!

Hi klemtest,
can you guide me on flashing CHT9110?
I couldnt seems to get it flash even after following the instruction.
Appreciate your help

i just followed Ajajaj Quoted, please allow me to share...
Step 1 - Anyway First of all, load the Hard SPL to your phone from : Set
<Klemtest>
Step 1.1 - go and download Hard-SPL-p3600i-V1.1.zip (810.6 KB, 438 views)
Step 1.2 - extract SPL-p3600i-V1.1.zip file onto your local drive
Step 1.3 - connect P3600i via USB, ensure you are under ACTIVESYNC mode in WindowXP (if you use Windows Vista, the you need Vista driver for detecting HTC phone at USB)
Step 1.4 - execute the ROMupdateutility from SPL-p3600i-v1.1 folder, ensure there is RUU_signed.nbh file available, otherwise the utility will prompt u for read file error.
Step 1.5 - once it executed, follows the instruction given from ROMupdateutility screen, until you see the progress bar show up, meanwhile u will notice that p3600i phone will prompt you for ROM upgrading message, click "Yes" to accept and proceed. Sequence pop-up message will be asked again in p3600i for using JumpSPL.exe to unlock CID,
Again click "Yes" to accept and proceed. ROMUpdateutility will complete 100% and your p3600i display will be turned to SPL-3.10 Oplira in bootloader mode now (if the ROMupdateUtility indicated there is update error, just ignore it and exit utility screen)
don't switch off your p3600i, let it continue showing SPL-3.10 Oplira in bootloader display.
Dude! you're now ready for step2 to flashing your favor WM6.0 / WM6.1 once you manage the "nbh" file which I didn't done it properly!!
So, I assumed you have downloaded the working ROM and extract them in local folder as stated in Step-2
Step 2 - So, what I did was to download RUU_TRINITY_WM6.1_WWE_ASIA_3.12.YK.Lite extract into its own folder (Mary seems to work as well)
Due to p3600i is manufactured with 256 NAND, memory address for storing "OS.nb" slightly difference compared to p3600 (CHT9100) with 128 MB RAM.
Hence, ajajaj advice to use ROMBaker.exe to exract "XX_OS.nb" your favor OS ROM (usually named as RUU_signed.nbh) that you downloaded and re-build it using NBHGEN.exe.
All this stuff is available here Custom RUU tools
In this case, 2 screens captured below showing u how to distingish it
(for wrong re-build of OS.nb at 400)
C:> NBHGEN.exe new_nbh.txt
TRIN100
SuperCID
Klemtest
XDADevelopers
100,00_IPL.nb
600,02_MainSplash.nb
601,03_SubSplash.nb
900,04_ExtROM.nb
300,05_GSM.nb
400,06_OS.nb
(for correct re-build of OS.nb at 401)
C:> NBHGEN.exe correct_nbh.txt
TRIN100
SuperCID
Klemtest
XDADevelopers
100,00_IPL.nb
600,02_MainSplash.nb
601,03_SubSplash.nb
900,04_ExtROM.nb
300,05_GSM.nb
401,06_OS.nb
you can follow the step below until step9 if you're not familar of using custom RUU tools:
Step 3 - then download the custom ruu updated from here: http://forum.xda-developers.com/showthread.php?t=295113 - also get the rombaker for trinity as found further down in the post.
Step 4 - unzip the custom_ruu stuff, put in the downloaded trinity rombaker to replace extracted rombaker,
Step 4a - Copy ruu_signed.nbh file that is found in folder created in Step 2 to the rombaker/workshop folder created in step 4
Step 5 - then use nbhextract (created in step 4) to extract the ruu_signed.nbh file that is now in the workshop folder
Step 6 - watch the output. (for file names)
Step 7 - Run the rombaker program and load the extracted files into their places (as referred to in step 6), then click generate NBH
It will ask you to save a file. call it new_nbh (or whatever you want) -
Step 8 - open this file (created in step 7) in notepad, and change the number 400 (about 5 lines down) to 401 save and exit
Step 9 - then open a dos/cmd/command.com window (whatever you want to call it), cd to the rombaker/workshop folder and then run the following:
nbhgen new_nbh.txt
NOTE: new_nbh.txt should be the same as the filename created in step 7
copy the generated RUU_signed.nbh file back to the RUU_TRINITY_WM6.1_WWE_ASIA_3.12.YK.Lite folder.
Your p3600i rom is now ready for flashing
<Klemtest>
Step-10 - after you have managed to get re-build RUU_Signed.nbh file by yourself. you can proceed last stage for completion.
As I mentioned, you continue keep your bootloader screen at SPL-3.10 Oplira just now. launch again RUUupdateutility.exe
Note: At this point, your personal data from the phone will be destroy, please make sure you back-up all data before regret and ensure ActiveSync is disable during execution the flashing.
Screen1 - On the Welcome Screen, click Next to begin the ROM update installation.
Screen2 - On the next screen, follow the listed instructions in the dialog box first. When you are done, click Next to proceed.
Note: Ignore the instructions listed due to you are flashing via bootloader mode, and ActiveSync is disable.
Screen3 - The following message will then be displayed, indicating that the utility is verifying and acquiring information about the device as preparation for the update process. Wait for this verification process to finish.
Screen4 - Below the device information, information about the new ROM update will then be displayed. If you are certain that you want to install the phone with the new ROM update, click Next to proceed.
Screen5 - confirmation message then appears and shows the length of time it will take to copy the necessary files (including radio image) to the device. Click Next to begin the update.
Screen6 - A progress bar will run through the screen during the update process.
Note: In the middle of the update process, the progress bar may stop running. This is normal as the RUU is adjusting itself to complete the update process automatically. (probably will take up 10 minutes)
6. When you see the screen shown CONGRATULATION message! means update is complete. Click Finish to exit the utility. Otherwise, you will have trouble now to troubleshoot per below steps!
GOOD LUCK and happy computing!
Troubleshooting and Error Recovery

[Q] Problems after a dodgy install.

DaveShaw Edit:
Split the thread from the NBH Extract thread.
Hi there!
First off all thanks for the great help and all the hard work you all doing!
Keep on going!
I have problem extracting my "RUU_signed.nbh" file using the the "NBHextract" tool. The "nbh" file I need is from the:
"RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship" Rom.
I'm trying to extract with the CMD, or trying to drag & drop the "RUU_signed.nbh" onto the "NBHextract", its says in the CMD: extracting. Bat in fact, noting happens! There only the same 2 file in the folder and nothing else.
Can any one help?
Maybe some of you can tray to extract the file and upload the result to www.rapidshare.com or somewhere else?
I'm using desktop with XP PRO English.
Please! I'm going crazy!

Shaico said:
Hi there!
First off all thanks for the great help and all the hard work you all doing!
Keep on going!
I have problem extracting my "RUU_signed.nbh" file using the the "NBHextract" tool. The "nbh" file I need is from the:
"RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship" Rom.
I'm trying to extract with the CMD, or trying to drag & drop the "RUU_signed.nbh" onto the "NBHextract", its says in the CMD: extracting. Bat in fact, noting happens! There only the same 2 file in the folder and nothing else.
Can any one help?
Maybe some of you can tray to extract the file and upload the result to www.rapidshare.com or somewhere else?
I'm using desktop with XP PRO English.
Please! I'm going crazy!
Click to expand...
Click to collapse
I'm lost sorry
Have you downloaded the exe and need the NBH File? If so Install WinRAR, right click the exe and click Extract...
If you have the NBH file, then I suggest you re-try the steps you quoted again. Let me know if there are any errors on any steps.
Ta
Dave

DaveShaw said:
I'm lost sorry
Have you downloaded the exe and need the NBH File? If so Install WinRAR, right click the exe and click Extract...
If you have the NBH file, then I suggest you re-try the steps you quoted again. Let me know if there are any errors on any steps.
Ta
Dave
Click to expand...
Click to collapse
Well, I did those steps before, bat have no result. Don't see any error at the CMD. only show me the extract progress and at the end (after 2 min), there are no result! Only the same 2 file I started the progress. (RUU_signed.nbh + NBHextract tool)
I have the NBH and need to extract it... So I can continue to step 6 at these guide: Reverting back to the AT&T or HTC ROM and SPL for Warranty or return http://forum.xda-developers.com/showthread.php?t=335568
Can any one trey to extract the RUU_signed.nbh from
RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88 .07_1.27.12.11_Ship" Rom for me and upload the result?
Thanks in advanced!
Ok, update! I try to extract this in vista by drag & drop, and it worked!!! Bizarre...; and I got 5 file from the extract. The CMD still didn't work in the vista though...
Bat now i'm confused, because I read on other thread that I need to do Hard SPL first so I don't brick my TyTn 2 device... and in the guide:
(http://forum.xda-developers.com/showthread.php?t=335568),
its says I don't need to do Hard SPL. So what should I do?
let me tell you the reason I want to flash the SPL: I install Hebrew support pack that I download from the net and it work ok till I start to notice a rapidly massage of low memory (I didn't install nothing else!), bat the most reason fact that I want to flesh the SPL is because in addition of that message, the cracked Hebrew pack, showing me the logo of the company that made the pack; every time I restart the device, just before the HTC welcome logo and its showing for at lest 30 sec!!! Every soft reset!! So I try to uninstal that pack and its still showing every restart! Even, try to up grade to WM6.1, and still its there!!!! So I start to read some thread and think I need that spl flash so I can get rid of that "sticky" logo that slow my device and steal my memory!!
Can any one now something like that issue, and what shold I do in order to uninstall that long logo?

Shaico said:
Well, I did those steps before, bat have no result. Don't see any error at the CMD. only show me the extract progress and at the end (after 2 min), there are no result! Only the same 2 file I started the progress. (RUU_signed.nbh + NBHextract tool)
I have the NBH and need to extract it... So I can continue to step 6 at these guide: Reverting back to the AT&T or HTC ROM and SPL for Warranty or return http://forum.xda-developers.com/showthread.php?t=335568
Can any one trey to extract the RUU_signed.nbh from
RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88 .07_1.27.12.11_Ship" Rom for me and upload the result?
Thanks in advanced!
Click to expand...
Click to collapse
Ok, update! I try to extract this in vista by drag & drop, and it worked!!! Bizarre...; and I got 5 file from the extract. The CMD still didn't work in the vista though...
Bat now i'm confused, because I read on other thread that I need to do Hard SPL first so I don't brick my TyTn 2 device... and in the guide:
(http://forum.xda-developers.com/showthread.php?t=335568),
its says I don't need to do Hard SPL. So what should I do?
let me tell you the reason I want to flash the SPL: I install Hebrew support pack that I download from the net and it work ok till I start to notice a rapidly massage of low memory (I didn't install nothing else!), bat the most reason fact that I want to flesh the SPL is because in addition of that message, the cracked Hebrew pack, showing me the logo of the company that made the pack; every time I restart the device, just before the HTC welcome logo and its showing for at lest 30 sec!!! Every soft reset!! So I try to uninstal that pack and its still showing every restart! Even, try to up grade to WM6.1, and still its there!!!! So I start to read some thread and think I need that spl flash so I can get rid of that "sticky" logo that slow my device and steal my memory!!
Can any one now something like that issue, and what shold I do in order to uninstall that long logo?

Shaico said:
Ok, update! I try to extract this in vista by drag & drop, and it worked!!! Bizarre...; and I got 5 file from the extract. The CMD still didn't work in the vista though...
Bat now i'm confused, because I read on other thread that I need to do Hard SPL first so I don't brick my TyTn 2 device... and in the guide:
(http://forum.xda-developers.com/showthread.php?t=335568),
its says I don't need to do Hard SPL. So what should I do?
let me tell you the reason I want to flash the SPL: I install Hebrew support pack that I download from the net and it work ok till I start to notice a rapidly massage of low memory (I didn't install nothing else!), bat the most reason fact that I want to flesh the SPL is because in addition of that message, the cracked Hebrew pack, showing me the logo of the company that made the pack; every time I restart the device, just before the HTC welcome logo and its showing for at lest 30 sec!!! Every soft reset!! So I try to uninstal that pack and its still showing every restart! Even, try to up grade to WM6.1, and still its there!!!! So I start to read some thread and think I need that spl flash so I can get rid of that "sticky" logo that slow my device and steal my memory!!
Can any one now something like that issue, and what shold I do in order to uninstall that long logo?
Click to expand...
Click to collapse
OK I see what your getting at... Some facts first...
1. The guide you posted a Link to advises how to restore the Stock SPL and ROM if you have Hard SPL and a custom ROM. It does not mention Hard SPL for the simple fact that it is a guide on how to remove it (assumes you have it otherwise you wouldn't be reading the guide).
2. The SPL is the bootloader similar (in ways) to your PC's BIOS. I am pretty certain it has not been comprimised.
Firstly we need to know which splash was changed. There are 3 possible splashes that could have been changed. Have a look at this guide by -888- on upgrading you splash.
It is most likley to be one (or both) of the last two. Changing the first one requires Hard SPL and Flashing.
Rather than fixing the splash screens, I'd do a Hard Reset that will remove everything that was not part of your original OS ROM image.
If it is still there after that, I'd flash HardSPL and then flash a new Splash screen.
And, finally , this forum does not support cracked software, I will help you remove it however, if you promise to pay for it in the future
Ta
Dave

DaveShaw said:
OK I see what your getting at... Some facts first...
1. The guide you posted a Link to advises how to restore the Stock SPL and ROM if you have Hard SPL and a custom ROM. It does not mention Hard SPL for the simple fact that it is a guide on how to remove it (assumes you have it otherwise you wouldn't be reading the guide).
2. The SPL is the bootloader similar (in ways) to your PC's BIOS. I am pretty certain it has not been comprimised.
Firstly we need to know which splash was changed. There are 3 possible splashes that could have been changed. Have a look at this guide by -888- on upgrading you splash.
It is most likley to be one (or both) of the last two. Changing the first one requires Hard SPL and Flashing.
Rather than fixing the splash screens, I'd do a Hard Reset that will remove everything that was not part of your original OS ROM image.
If it is still there after that, I'd flash HardSPL and then flash a new Splash screen.
And, finally , this forum does not support cracked software, I will help you remove it however, if you promise to pay for it in the future
Ta
Dave
Click to expand...
Click to collapse
First off all, thanks for the help. I appreciate it!
I must mention that I buy the original version in advanced. I just was curious to check the net version and it turns out that it's not so good... to such an extent that I ruin me Kaiser...
now let me be more specific with me problem because i m not sure I explain the problem clearly and I don't want to start a progress that I don't know how to do....
So, like I say, after I finish the install of the language pack, I had to clear storage in order to crack the license. But since that, every restart, appear the logo of the software company for 30 sec!!! Every restart!!!! Its make me crazy!!!! (The logo appear just before the HTC logo load. (It's appear with the rom and the radio version = R.G.D). But this is not the main problem!! The most important problem is that since the install, its keep say me that I'm run out of memory, and I m even didn't install nothing!!! This is bad!
So off Corse I'm try to do hard reset and even try to upgrade to WM6.1, but the cursed logo is still there!!!!
Now, after I try to explain the problem, I want to know if the solution you recommended may solve the logo problem and more important the memory "leak"....
What I basically want is to bring me Kaiser to its original status like from "out of the box"... because it's only 2 week old!!!!!
I'm hope you understand me problem.
Thanks you in advanced!

Shaico said:
First off all, thanks for the help. I appreciate it!
I must mention that I buy the original version in advanced. I just was curious to check the net version and it turns out that it's not so good... to such an extent that I ruin me Kaiser...
now let me be more specific with me problem because i m not sure I explain the problem clearly and I don't want to start a progress that I don't know how to do....
So, like I say, after I finish the install of the language pack, I had to clear storage in order to crack the license. But since that, every restart, appear the logo of the software company for 30 sec!!! Every restart!!!! Its make me crazy!!!! (The logo appear just before the HTC logo load. (It's appear with the rom and the radio version = R.G.D). But this is not the main problem!! The most important problem is that since the install, its keep say me that I'm run out of memory, and I m even didn't install nothing!!! This is bad!
So off Corse I'm try to do hard reset and even try to upgrade to WM6.1, but the cursed logo is still there!!!!
Now, after I try to explain the problem, I want to know if the solution you recommended may solve the logo problem and more important the memory "leak"....
What I basically want is to bring me Kaiser to its original status like from "out of the box"... because it's only 2 week old!!!!!
I'm hope you understand me problem.
Thanks you in advanced!
Click to expand...
Click to collapse
Do you have a storage card? I wonder if it flashed off the storage card? Anyhow, let's get busy...
Firstly remove anything you want to keep off the card and then format it.
Then flash the Hard SPL using the instructions here: http://forum.xda-developers.com/showthread.php?t=396922 (Second set of instructions in post #2).
Once, you have completed the flash, enter the bootloader before Windows Mobile loads.
Then, when you are in the bootloader flash a New ROM and Radio.
Hopefully that will remove everything that shouldn't be there.
Also, moving out of pof's thread. To a new one
Ta
Dave

DaveShaw said:
Do you have a storage card? I wonder if it flashed off the storage card? Anyhow, let's get busy...
Firstly remove anything you want to keep off the card and then format it.
Then flash the Hard SPL using the instructions here: http://forum.xda-developers.com/showthread.php?t=396922 (Second set of instructions in post #2).
Once, you have completed the flash, enter the bootloader before Windows Mobile loads.
Then, when you are in the bootloader flash a New ROM and Radio.
Hopefully that will remove everything that shouldn't be there.
Also, moving out of pof's thread. To a new one
Ta
Dave
Click to expand...
Click to collapse
I'm sorry, it didn't help! Or I didn't understand the mining of the post! so I follow the instructions and then what? Nothing change! It's all the same! I can't see any different! What else can I do? How can I erase all the data include all!! Data!! And start again and make it brand new again? Im just want this logo to go away!! How do I make my Kaiser new again with no foreign files that no came with me device from the factory! I want to Cray!! I can't help it any more! Please help.
Can you please help me live? Can we kindly chat in the messenger? I'm lost of me mind with all this posts and cant mange this alone!
Thank you in advanced!

Anyone can please help?

Hi, sorry for the delay.
The instructions in my last post should get you back up and running. You'll have have to read up on the wiki and the ROM Development stickies for more help.
I am at work now, and am pressed for time at the moment, have a look on #xda-devs chanel on FreeNode after 8-9PM (GMT) for me. I'll be able to chat then. (I am also on MSN, but I don't use it at home that often. I'll try and make an effort over the next few days.)
Ta
Dave