I can't seem to change the sip on my device. It always reverts to the default.I have tried using the sip changer cab to no avail. I have searched the forums and can't find a solution. I am running ryncppr v4 by the way. Is it because this white keyboard is cooked into the rom maybe? anyone else having this problem? thx in advance.
A lot of newer ROMs have this issue. The solution for this problem under Dutty's (or anyone else's) ROMs may not work for yours, so please post your question in the thread for your particular ROM as it greatly increases the likelihood of getting a solution.
Search the Hermes forum for "SIP Change" or "SIPChange". It's a simple app that someone developed that ensures your SIP setting sticks. I used it on my Hermes and it also now works on my Kaiser.
warmkiwi99 said:
Search the Hermes forum for "SIP Change" or "SIPChange". It's a simple app that someone developed that ensures your SIP setting sticks. I used it on my Hermes and it also now works on my Kaiser.
Click to expand...
Click to collapse
The problem with SIP Change is that it does not work 100% of the time with some of the newer WM 6.1 builds. It works for some people with ROM A, and not for other people also running ROM A while following the exact same steps.
Apologies. Wasn't aware of that.
sWuRv - have you tried SIP Change?
No problem. I would also suggest he still try SIP Change since it does work with most ROMs.
warmkiwi99 said:
Apologies. Wasn't aware of that.
sWuRv - have you tried SIP Change?
Click to expand...
Click to collapse
sWuRv said:
I have tried using the sip changer cab to no avail.
Click to expand...
Click to collapse
NotATreoFan said:
The problem with SIP Change is that it does not work 100% of the time with some of the newer WM 6.1 builds. It works for some people with ROM A, and not for other people also running ROM A while following the exact same steps.
Click to expand...
Click to collapse
sWuRv said:
I am running ryncppr v4 by the way.
Click to expand...
Click to collapse
Have you tried posting your question in the rom thread?
hey thanks for the quick replies. I have tried using the sip change cab to no avail. I believe the one I am using delays a couple of seconds after windows boots and then changes the sip. is this the same one you guys are referring to or is there another? lemme try extending the delay a bit...
sWuRv said:
hey thanks for the quick replies. I have tried using the sip change cab to no avail. I believe the one I am using delays a couple of seconds after windows boots and then changes the sip. is this the same one you guys are referring to or is there another? lemme try extending the delay a bit...
Click to expand...
Click to collapse
I use the touchpal keyboard and have had to playwith a lot of roms and sIP change and IM selector to get it to work. You want to make the delay 0 first of all. I have had good luck with IM_sip select. Laso if you use the Lock from system disable it during testing. Let me know what happens.
-McMex
SOLUTION (That worked for me)
Hi all,
I had the same issue and found a solution that worked for me. It was Opera 10 beta 2. Since I installed that I could still change the SIP but after a soft reset the problem appeared.
So I hard reset the device and installed the apps all over again. After installing Opera and restarting (or soft resetting the device) the problem appeared again.
After uninstalling I could change the SIP immidiatly.
Sarah
Related
Anyone know how to switch the keyboard configuration? This is very much the same problem as many TyTN users experienced when installing an operator ROM: my keyboard has symbols in the wrong place (e.g. ! and @ are reversed - I have an @ over the Q and a ! over the W).
The instructions posted in the Hermes wiki (http://wiki.xda-developers.com/index.php?pagename=Hermes_Problems) and in various threads (like http://forum.xda-developers.com/showthread.php?t=283881) don't work, as the registry key ([HKEY_LOCAL_MACHINE\SOFTWARE\OEM\Qwerty]) doesn't exist. Maybe this is because it was written to help Cingular 8525 customers install HTC ROMs, which is the opposite thing I want to do. In fact I can't find the string "qwerty" in the registry at all. Creating the OEM\Qwerty key and populating the suggested value doesn't work.
Anyway if someone knows how to get the HTC symbol mapping back please let me know. Alternatively if anyone has the release version of the HTC Kaiser ROM, that would probably do the trick for me too.
M
I assume you've already tried this ROM?
Here is the cab fix for the 8525 keyboard being messed up. I'm attaching it below.. but I don't know if it just uses the same registry fix.
If the above Image isn't the latest release for the kaiser I wouldn't worry too much as people are starting to get the HTC RTM kaiser right now and I'm sure the official rom will be posted soon.
I've tried 'em all. Because they're AT&T ROMs they all have the AT&T Mappping. Why do carriers have to change the mappings of their keyboards at all?
thanks anyway.
I'm sure you've already found this solution...but was trying to find it myself and had to deduce it from reading how the forum people were able to do the reverse (assign AT&T layout to non-AT&T ROM).
Try this:
delete the registry key HKLM/HARDWARE/DEVICEMAP/KEYBD/CWSLayout
Note that this works for correcting the keyboard layout problem when flashing a Rogers ROM on the HTC-branded kaiser
Rumball said:
I'm sure you've already found this solution...but was trying to find it myself and had to deduce it from reading how the forum people were able to do the reverse (assign AT&T layout to non-AT&T ROM).
Try this:
delete the registry key HKLM/HARDWARE/DEVICEMAP/KEYBD/CWSLayout
Note that this works for correcting the keyboard layout problem when flashing a Rogers ROM on the HTC-branded kaiser
Click to expand...
Click to collapse
I think you ment THIS post
Still Nada here for this guy.
Tried,
Keyboard Fix WMXL 8525.cab
WM VI 8525 Keyboard Patch.CAB
Ive looked in my registry for the CWSLayout
Tried the reg edit for the qwerty key and the suggested edits were the values I already have.
Nada...
Ive got a Rogers Tytn that Ive upgraded using a ATT 8525rom
everything works great, other than the 8 symbol keys.
Any more suggestions?
theMopie
Rumball said:
I'm sure you've already found this solution...but was trying to find it myself and had to deduce it from reading how the forum people were able to do the reverse (assign AT&T layout to non-AT&T ROM).
Try this:
delete the registry key HKLM/HARDWARE/DEVICEMAP/KEYBD/CWSLayout
Note that this works for correcting the keyboard layout problem when flashing a Rogers ROM on the HTC-branded kaiser
Click to expand...
Click to collapse
mlekas said:
Anyone know how to switch the keyboard configuration? This is very much the same problem as many TyTN users experienced when installing an operator ROM: my keyboard has symbols in the wrong place (e.g. ! and @ are reversed - I have an @ over the Q and a ! over the W).
The instructions posted in the Hermes wiki (http://wiki.xda-developers.com/index.php?pagename=Hermes_Problems) and in various threads (like http://forum.xda-developers.com/showthread.php?t=283881) don't work, as the registry key ([HKEY_LOCAL_MACHINE\SOFTWARE\OEM\Qwerty]) doesn't exist. Maybe this is because it was written to help Cingular 8525 customers install HTC ROMs, which is the opposite thing I want to do. In fact I can't find the string "qwerty" in the registry at all. Creating the OEM\Qwerty key and populating the suggested value doesn't work.
Anyway if someone knows how to get the HTC symbol mapping back please let me know. Alternatively if anyone has the release version of the HTC Kaiser ROM, that would probably do the trick for me too.
M
Click to expand...
Click to collapse
I got the AT&T Tilt and i got the same problem. I tried all the suggestions here but all failed.
delete the registry key HKLM/HARDWARE/DEVICEMAP/KEYBD/CWSLayout => There is not that key in the registry of my phone
Anyone can tell me how to fix it?
Thanks!
imbbn said:
I got the AT&T Tilt and i got the same problem. I tried all the suggestions here but all failed.
delete the registry key HKLM/HARDWARE/DEVICEMAP/KEYBD/CWSLayout => There is not that key in the registry of my phone
Anyone can tell me how to fix it?
Thanks!
Click to expand...
Click to collapse
Read the Kaiser Wiki -> Hacks and Tweaks -> Software section.
Here's the TMO Wing original ROM with TouchFlo added. After the screen alignment, the TMO customization app will run but it doesn't install anything. Give your phone some time to initially startup after the install before trying the TouchFlo. Use at your own risk. Thanks to the PDAVIET team for the install process, anichillus for the kitchen And I think??? Tom Love ??? for the TouchFlo process itself. If I've used something of someone else's. I'm sorry, let me know and I'll remove it.
http://rapidshare.com/files/55254155/Wing_OEM_With_TouchFlo.zip
foltz61 said:
Here's the TMO Wing original ROM with TouchFlo added. After the screen alignment, the TMO customization app will run but it doesn't install anything. Give your phone some time to initially startup after the install before trying the TouchFlo. Use at your own risk. Thanks to the PDAVIET team for the install process, anichillus for the kitchen And I think??? Tom Love ??? for the TouchFlo process itself. If I've used something of someone else's. I'm sorry, let me know and I'll remove it.
http://rapidshare.com/files/55254155...h_TouchFlo.zip
Click to expand...
Click to collapse
the linky is broke ...
watcher64 said:
the linky is broke ...
Click to expand...
Click to collapse
Fixed. Thanks
this is specially made for the wing?
Smilez_c said:
this is specially made for the wing?
Click to expand...
Click to collapse
apparently so ... the files downloaded are "WING OEM with TouchFlo"
mmm I'll have to try it later cuz right now i have the Touch-IT,WWE v1.1 UPDATED 10.09.07 I wonder if any significant difference
ok guys im giving it a try.... wish me luck ...
zacwhite15 said:
ok guys im giving it a try.... wish me luck ...
Click to expand...
Click to collapse
good luck............
Bad luck so far ......
looking at a bootloader screen and nothing else ...
foltz61 said:
Here's the TMO Wing original ROM with TouchFlo added. After the screen alignment, the TMO customization app will run but it doesn't install anything. Give your phone some time to initially startup after the install before trying the TouchFlo. Use at your own risk. Thanks to the PDAVIET team for the install process, anichillus for the kitchen And I think??? Tom Love ??? for the TouchFlo process itself. If I've used something of someone else's. I'm sorry, let me know and I'll remove it.
http://rapidshare.com/files/55254155/Wing_OEM_With_TouchFlo.zip
Click to expand...
Click to collapse
I will try this rom now. But I still think that it is only included the TouchFlo, not the others app?
Is it possible if you cook a new rom based on the Wing OS like the version HERALD_WM6.0_4.17.07.12.PV? I have tried the Touch IT already but it could not compare with the .12.PV in general.
The biggest problem now is keyboard of Wing, it is different than 4350's keyboard. So if we can get the new rom with Wing OS, it is the best!
Thanks in advance!
Downloading now :] from the wifi across the street, this might take a while...
Please post asap guys how this works.
There are several questions I have:
Does this include ANY extra software?
if it doesnt include ANY, then is there a TF manager at least like touchflo 1.1?
Does this have the 6mb page pool applied to it?
It's the base tmob ruu, with touchflo. not bad but still way up on the mem usage since its the official ruu
i got it to install okay but i can't get touchflo started. there are no tf settings. it replaces the left soft key. some of the issues i read about before are apparent like clicking the "x" opens the right soft key.
reinstalling something else. GREAT JOB though and thanks for making this. i'll check it out again next release.
TF Settings are in the Programs Folder. It has the original page pool but, the quick page pool changer will still work. One thing I did notice though, the TF settings aren't checked but it does work for me. If it's not working, open the TF Settings and check 'Enable cube' and 'Enable Scroll'. Also set 'View mode' to 'TF default v4.1'. I'd hate to slim down the ROM and have it missing something that a lot of people use. If you want to customize the cube, open \Windows\BioTouch Settings. I will definitely be fixing a few things so post suggestions here. Don't expect any changes until next week though.
i couldn't find the settings dialouge in any folder. i went into the programs folder where all the programs are usually located (in the start menu) and then into all the subfolders, and couldn't find the settings. They were also not in the program files folder that i reached through file explorer.
Strange. it's all there for me. When I get home I'll flash back to the original RUU. Then reflash my version. Thanks for your input.
Almost the T-Mo ROM with Touch settings
Well it's almost what it says it is. Everything is there except for the basic T-Mo apps like Hotspot log-in, T-Zones and My5. Which isn't a bad thing becuase I don't use any of them, however it is the missing IM program, but again no big deal because that's available in th the forums here. All in all, so far I'm impressed.
is the keyboard layout correct??..other then that there will be no other reason to switch because some how i kept all my t-mobile files when i flashed to the touch it rom
Just a question. When i reflash, i normally cut out the customizing part. Is the touch-flo function a component of the "Customizing" function after a hard reset?
This cab will turn your program's folder from 3 column to 4 column. Just install the .cab and reset and your in buisness..
Nice. I like it a lot. Thanks for sharing.
Is this like Scotchua's Cab that does the similar thing?
Looks Good Though!
JimmyMcGee said:
Is this like Scotchua's Cab that does the similar thing?
Looks Good Though!
Click to expand...
Click to collapse
It's actually exactly like mine, but I don't mind sharing the credit I'm sure he stumbled across the fix the same way I did.
I will warn everyone, this does not work on every rom, but it's AWESOME for the ones that do I actually have it as part of my UC.
Yup doesn't work on Dutty's ROM
works fine on L26 Throttlelauncher beta6.0 ROM.
Many thanks!
do you need to reboot device or soft reset? not worked on a reboot on orange uk wm6.1 cab opp version 24.328.1.610 rom 3.28.61.0 wwe 05/02/08 radio 1.65.16.25 protocol v 25.83.40.02h
any ideas?
Hi do you have this tweak that can work om WM 6.1?
thanks in advance
scotchua said:
It's actually exactly like mine, but I don't mind sharing the credit I'm sure he stumbled across the fix the same way I did.
I will warn everyone, this does not work on every rom, but it's AWESOME for the ones that do I actually have it as part of my UC.
Click to expand...
Click to collapse
I stumbled across the settings and just made the cab. I didnt realize you had done this already. Sorry if i walked on top of you.
You need to reset after.
Im using hyperdragon III pro 6.1 works fine
reset via little button next to the usb port cab did not work
Cool tweak - thanks for sharing!
No AT&T ROMS
scotchua said:
It's actually exactly like mine, but I don't mind sharing the credit I'm sure he stumbled across the fix the same way I did.
I will warn everyone, this does not work on every rom, but it's AWESOME for the ones that do I actually have it as part of my UC.
Click to expand...
Click to collapse
I've downloaded and installed/uninstalled both versions of this with the stock AT&T 6.1 ROM with no bloatware. Neither version works, which bums me out.
jpcrailjr said:
I've downloaded and installed/uninstalled both versions of this with the stock AT&T 6.1 ROM with no bloatware. Neither version works, which bums me out.
Click to expand...
Click to collapse
One of these days we will get to the bottom of why Reg Cab and Changes don't stick on Stock Roms.
KD8DNS said:
I stumbled across the settings and just made the cab. I didnt realize you had done this already. Sorry if i walked on top of you.
Click to expand...
Click to collapse
absolutely nothing to be sorry for. i don't own the knowledge. thanks for sharing
Works perfect on ... see signature.
JimmyMcGee said:
One of these days we will get to the bottom of why Reg Cab and Changes don't stick on Stock Roms.
Click to expand...
Click to collapse
I'm at work, I have 6 tilts on my desk, here is the break down.
ATT 6.0--does not work
ATT 6.1--does not work
HDPROIII--works
L26---works
L26 Throttle--works
NATF--Dosent work
When I say dosent work im talking about the CAB file,
However if i edit the reg manually and reset, it works. Im at a complete loss.
KD8DNS said:
I'm at work, I have 6 tilts on my desk, here is the break down.
ATT 6.0--does not work
ATT 6.1--does not work
HDPROIII--works
L26---works
L26 Throttle--works
NATF--Dosent work
When I say dosent work im talking about the CAB file,
However if i edit the reg manually and reset, it works. Im at a complete loss.
Click to expand...
Click to collapse
I'll cook this into my next ROM and see how it goes. Thanks to both of the posters...
Does it work on the Settings pages also?
NotATreoFan said:
I'll cook this into my next ROM and see how it goes. Thanks to both of the posters...
Does it work on the Settings pages also?
Click to expand...
Click to collapse
Im working on that now.
KD8DNS said:
I'm at work, I have 6 tilts on my desk, here is the break down.
ATT 6.0--does not work
ATT 6.1--does not work
HDPROIII--works
L26---works
L26 Throttle--works
NATF--Dosent work
When I say dosent work im talking about the CAB file,
However if i edit the reg manually and reset, it works. Im at a complete loss.
Click to expand...
Click to collapse
Interesting,
NATF's Rom Is "almost" a ATT stock ROM.
I'm curious as to whether this doesn't work on HTC stock ROMs.
NATF or KD8NS do you know if there is some sort of CAB Security Reg setting that could be causing this?
I've gone through multiple Roms, different versions of hyperdragon III, and different versions of PDAcorner. When I try to select a different keyboard, it loads for a second, then goes back to the default. The only keyboards that work are other defaults, such as Block Recognizer, Letter Recognizer, and Symbol Pad.
SOMETIMES PCM keyboard works, but NEVER has any of the diamond keyboards every worked.
I've even tried SIPchange, but the same thing happens. I assume the same has happened to you guys too? did you ever fix it?
thanks!
Is it just me?
How many of you use the Diamond Keyboard, or keyboard other than the default?
default IM
are you still having the same problem? did you ever try using the default im cab for wm5?
it worked for pcm, but i never tried it with the diamond keyboards.
Ramey said:
are you still having the same problem? did you ever try using the default im cab for wm5?
it worked for pcm, but i never tried it with the diamond keyboards.
Click to expand...
Click to collapse
The default cab is the ticket...it works when everything else fails. I don't even bother with the other stuff now. If the sip won't stick, I just install that cab and select it. A soft reset later and you are good to go.
Ramey said:
are you still having the same problem? did you ever try using the default im cab for wm5?
it worked for pcm, but i never tried it with the diamond keyboards.
Click to expand...
Click to collapse
I'm not sure what you mean by default im cab for wm5... lol
mikeeey said:
I'm not sure what you mean by default im cab for wm5... lol
Click to expand...
Click to collapse
I have attached attached it below. Also there are other keyboards that work better than the diamond ones...raphael and opal work much better. Do a search for their cabs...
parleyp said:
I have attached attached it below. Also there are other keyboards that work better than the diamond ones...raphael and opal work much better. Do a search for their cabs...
Click to expand...
Click to collapse
doesnt work... atleast not with PCMkeyboard. I'll reinstall PCM.
I cant seem to find the raphael and opal keyboard.. but I'm going to keep ssearching lol.. i dont wanna sound like a complete noob!
edit:
sipchange and imSelector did nothing... the only reason I fixed PCMkeyboard was cause uninstalled the old and re installed it.. as far sa the raphael and opal keyboard.. i downloaded something, but im not sure if it was it, so.. could someone kindly link me to the 2 keyboards? lol
thanks.
edit: (5 seconds later)
PCMkeyboard just quit working again, and imSelector and sipchange doenst fix it.
So instead i must ask... what roms are you guys using that support SIPS?
default im selector instructions
mikeeey said:
doesnt work... atleast not with PCMkeyboard. I'll reinstall PCM.
.
edit:
sipchange and imSelector did nothing... could someone kindly link me to the 2 keyboards? lol
thanks.
.
edit: (5 seconds later)
PCMkeyboard just quit working again...
Click to expand...
Click to collapse
1. install the default im wm5 cab above
2. install the opal keyboard you want
3. start > programs > im selector > opal keyboard
4. start > settings > personal > input > opal keyboard
5. soft reset
-----
you may need 2 soft reset twice before it cooperates. if you have your phone password protected, the default keyboard you selected will never show until AFTER you enter the password.
only RARELY do i get a glitch now, and a reset usually fixes the problem.
let us know!
mikeeey said:
doesnt work... atleast not with PCMkeyboard. I'll reinstall PCM.
I cant seem to find the raphael and opal keyboard.. but I'm going to keep ssearching lol.. i dont wanna sound like a complete noob!
edit:
sipchange and imSelector did nothing... the only reason I fixed PCMkeyboard was cause uninstalled the old and re installed it.. as far sa the raphael and opal keyboard.. i downloaded something, but im not sure if it was it, so.. could someone kindly link me to the 2 keyboards? lol
thanks.
edit: (5 seconds later)
PCMkeyboard just quit working again, and imSelector and sipchange doenst fix it.
So instead i must ask... what roms are you guys using that support SIPS?
Click to expand...
Click to collapse
I am in the same boat as you and the only keyboard that I have gotten to work is resco keyboard.....I have same exact problems as you...did you ask SJ about it....
SJ's opal keyboard
im having problems attaching files, but SJ's keyboards can be found here.
apply the default im instructions and a couple of soft resets later, you should be good 2 go.
I played with a Samsung Omnia yesterday, I really liked the keyboard SIP, is it possible to download and get to work on our kaiser's.
not sure...
Hello! Why Dialer calls cannot show chinese, but contacts show chinese is ok.
waikit818 said:
Hello! Why Dialer calls cannot show chinese, but contacts show chinese is ok.
Click to expand...
Click to collapse
Which ROM? Shipped one or cooked one? Please give more details.
Without that nobody can help you?
BeeGee_Tokyo said:
Which ROM? Shipped one or cooked one? Please give more details.
Without that nobody can help you?
Click to expand...
Click to collapse
Cook Rom, dialer calls record cannot show chinese.
waikit818 said:
Cook Rom, dialer calls record cannot show chinese.
Click to expand...
Click to collapse
What cooked ROM did you use?
Windows Mobile 6.1 or 6.5?
Who is the cook?
Look for the thread of the ROM you flashed and search there. Maybe there is already a solution.
search the sunglobe patch, it works!
hertzjin said:
search the sunglobe patch, it works!
Click to expand...
Click to collapse
Doesn't work for dialer still.
it works for me. before it showed the rectangles, after installing the cab and copy the font to window, the chinese characters can be displayed normally.
buddy, would you mind having it uploaded here..?
hertzjin said:
it works for me. before it showed the rectangles, after installing the cab and copy the font to window, the chinese characters can be displayed normally.
Click to expand...
Click to collapse
thank you very much
hertzjin said:
it works for me. before it showed the rectangles, after installing the cab and copy the font to window, the chinese characters can be displayed normally.
Click to expand...
Click to collapse
With your instruction, I still got no luck on getting the chinese displayed and the rectangles still there.
Any ideas?
i suggest u go to some d2 bbs in china. they are all chinese.
if u need,i can mail u some.
kivnzhang said:
i suggest u go to some d2 bbs in china. they are all chinese.
if u need,i can mail u some.
Click to expand...
Click to collapse
any traditional chinese rom for d2?
may you pls give me the address of those bbs? thanks a lot !
check XDA China. In this bbs, there are a lot of ROMs in Chinese
I know. But I prefer the UI to be in English
sorry not reply soon,so busy recently.
you can see that
http://xda-china.com/viewthread.php?tid=3426&extra=page=1&filter=type&typeid=1
if it is useful/.
OCedHrt said:
I know. But I prefer the UI to be in English
Click to expand...
Click to collapse
Go to rick119.com. Such .cab can fix it. I tried the RickyMSYH6.0 there, really worked.
Guys this problem is a really simple one.
First, I haven't had a problem displaying Chinese in the dialer, but I'm still mainly using Chinese ROMs on my D2. They show fine on my WWE HD though.
Still, the problem is going to be whether or not MSYH has been mapped to the font being used in the dialer. Most likely the dialer has changed its font and msyh isn't being mapped there. For whatever Chinese font install cab you are using, look at the included _setup.xml for the current font mappings that it installs. You may be able to add those manually in the registry.
Rob
i have the same probem
RobRedbeard said:
Guys this problem is a really simple one.
First, I haven't had a problem displaying Chinese in the dialer, but I'm still mainly using Chinese ROMs on my D2. They show fine on my WWE HD though.
Still, the problem is going to be whether or not MSYH has been mapped to the font being used in the dialer. Most likely the dialer has changed its font and msyh isn't being mapped there. For whatever Chinese font install cab you are using, look at the included _setup.xml for the current font mappings that it installs. You may be able to add those manually in the registry.
Rob
Click to expand...
Click to collapse
sorry, i can not understand. How can i add manually? Thanks!
有没有安装雅黑语言包什么的
Try this. I have used this on the Diamond, Diamond 2 and HD2 TMobile with no issues. Search for this file: "uhei00m-gray.cab". Copy it to the storage card and install to device. It will require a soft reset. If ALL programs do not display Chinese properly... reinstall the cab file and soft reset again. As a note: If you did not hard reset after the ROM flash this may or may not work with all programs. I have used this together with "kuruan.net_GB_PPC_v2.1.8.cab" chinese handwriting input with absolutley no problems with all ROM's I have tested. The speed of the handwriting recognition is awesome. My first post...lol. Hope it helps. I know all the posts I have read here have helped me tons.
use RickyMSYH6.0. I been using it w/ many different phones, and it works almost every time. if there's some place doesn't display chinese, and some are, then that's means some fonts that didn't remapping to MSYH, then just find out what font that place is using, and then go to edit the reg to remapping it to MSYH
fonts that already remapped can be found here
HKEY_LOCAL_MACHINE\Software\Microsoft\FontLink\SystemLink