Hey guys, I am using Dutty's WM 6.1 19209 rom
What my problem is, i want to change the task manager that comes with this rom to the newer version so i can get my video to start recording. I dont know how to uninstall it and replace it because there is an icon in the programs folder.
I read somewhere that all i need to do is replace it and it will work but idk how to replace them in that folder.
So, you don't know how to uninstall it because there is an icon in programs. Interesting. I often get confused about uninstalling things because it's installed. Hmmm.. How about, this probley won't work but it could.
Start
settings
system
remove programs.
If it's there then you need to uninstall via the uninstall.
If not just install the new app, if it's a newer version of the same app it should uninstall automatically.
If this isn't what you ment then I suggest you write your problem out a bit better.
yeah its not there
the newer version wont work when i copy it since the old one is still here.
can i just remove it from the registry?
um is this a cab file or something?
yeah, got it from his website
You should request this in the tread of rom, bigger chance one of the people who is using it or helping out on support there sees it. If not wait couple of days and perhaps bumping it. I say this because if everyone making a new tread like this its going to be impossible to read this forum in the end.
Good luck mate
So you can't copy the cab file to an MicroSD ? Thats amazing.
omfg wow
you would think iv tried that by now.
mode said:
omfg wow
you would think iv tried that by now.
Click to expand...
Click to collapse
DURKA DUR I'm going off of what you said.
the newer version wont work when i copy it since the old one is still here.
can i just remove it from the registry?
Click to expand...
Click to collapse
to me, the reads as you tried to copy it to the phone but it no workie.... I am shocked that the phone won't allow the file to be copied.
Copy and Install are 2 dif things.
I just want to know how to uninstall the one that came with the rom.
copying the new crap isnt the issue.
you cant uninstall it cause its cooked into the rom, use total commander and then you can copy it over
Related
Hello all. Just got my phone on Orange and I like it. I have been a Mac-user for the past 12 years so I am used to not tweaking my gadgets. Can someone explain how I install the CABs onto my Kaiser via either my G5 iMac or my intel Macbook. Many thanks
do'h not very sure, but you might want to try the missing sync, grab the latest version, it now supports win5 and 6. basically that's what you need to synch your mac and PDA, but not very sure if you can install 'em through it though
Now how do I find the installed CAB
OK I have downloaded a CAB onto the Kaiser via Missing Sync. (HTC album mui 0419.cab) So how do I now find it on the phone and activate it or any other CAB?
Thanks again
not that hard
I get that you're new, I am too, but try to figure this stuff out by yourself.
Bluetooth should work for getting files onto the phone (my docs/bluetooth)
When you sync to the phone, the PC version is that you see the phone on the schema/folder tree and can choose where to put it.
When you find the cab file, opening it will install it. Generally try to put system specific things on main memory and things like games on a storage card.
Look at some must have threads to find programs that you like and after you figure it out try a hard reset and reinstall things. That will let you keep a stable device.
As for ROMS, I would be careful of even thinking about flashing on a mac unless you find a thread telling you how to do it, you don't want a bricked device.
Remember to search the forums - it's worth your time.
Just mount the kaiser with missing sync. After that, drag and drop the file to a location that you can remember. Once you do that, just go to the file explorer in the kaiser, locate the file, and click. You should be all set.
what about a non-cab files? with an .exe extension, will it be installable trough missing sync?
from what I can remember, Missing Sync is really broken at the moment. (under 10.5).
To install a cab, you just use the tab next to syncronize, what is it, the file tab or somehing?
if it's a .cab, it will be loaded automatically. But make sure there's no spaces/irregular characters on the .cab, otherwise, it won't load the installation, and possibly, the file will not be uploaded at all. I think this is a missing sync bug.
Nope, you're going to have to pull the .CAB out of the .EXE file
jakontil said:
what about a non-cab files? with an .exe extension, will it be installable trough missing sync?
Click to expand...
Click to collapse
chenga said:
Nope, you're going to have to pull the .CAB out of the .EXE file
Click to expand...
Click to collapse
hi chenga, mind to point me how to do so? because i am going to lose my XP system very soon
Great program, but Im having trouble with the sms function.
Ive gone in and changed the registry to where the program is the default contact manager, and made the changes for the softkey. What is happening is that when in PocketCM and I want to read my text messages, the program will load the messages and then disappear after a matter of seconds. It doesn't stay up long enough for me to read anything.
Ive been to their site and searched around and wasn't able to find anything close. Ive searched here and didn't find anything helpful.
If anyone has an idea, please let me know.
really, and I mean REALLY slows my phone down too....
try the beta version of .16. its 100x faster than .15.
Wassona - I never had that problem even when I was using .15. I would suggest to uninstall and reinstall it.
Hagi37 said:
try the beta version of .16. its 100x faster than .15.
Wassona - I never had that problem even when I was using .15. I would suggest to uninstall and reinstall it.
Click to expand...
Click to collapse
Anyone have a cab file for .16??? I downloaded what is available from the creators website, but its just the program file with nothing to "tell the phone to use it" instead of contacts.
Hagi37 said:
try the beta version of .16. its 100x faster than .15.
Wassona - I never had that problem even when I was using .15. I would suggest to uninstall and reinstall it.
Click to expand...
Click to collapse
I tried that numerous time before I created the post and it didnt change anything. Im wondering if it has something to do with the way my sms/mms is setup on the phone.
Who knows. Maybe I'll get a reply on the Pocketcm forum.
chris30_2001 said:
Anyone have a cab file for .16??? I downloaded what is available from the creators website, but its just the program file with nothing to "tell the phone to use it" instead of contacts.
Click to expand...
Click to collapse
Just copy the downloaded files in your program file map on your device within the map CMcontacts.
you don't need the cab file when you already have it installed.
This might be something to think about. Hard reset the phone and thought that I had backed up all the sms messages that I had. Turned out i was wrong. Re installed pocketcm and it works. Before I had over 340+ sms messages due to the constant backups. Im wondering if i didnt exceed some buffer.
TPA said:
Just copy the downloaded files in your program file map on your device within the map CMcontacts.
you don't need the cab file when you already have it installed.
Click to expand...
Click to collapse
Thanks a lot buddy!
Even thought I did a bloatless install I found all of the bloatware cab files in my windows folder. Since I will never use any of this junk how do I delete them without WM6.1 telling me I can't?
They're a part of the ROM usually, which means that you can't deleted them.
The easiest way to delete them is to install ROMeOS Rom. Here's a link, http://forum.xda-developers.com/showthread.php?t=421001.
kimtyson said:
The easiest way to delete them is to install ROMeOS Rom. Here's a link, http://forum.xda-developers.com/showthread.php?t=421001.
Click to expand...
Click to collapse
im sorry, but i really do not see the point of this. i doubt that when he posted this question, he wanted a response like this one. is it so difficult to give someone a straightforward answer to a straightforward question? even though romeos is a very great rom
like kareem said, you usually cannot delete them
I installed the SPB shell 3on my Xperia and had lots of troubles with it, like no way to goes back to Today panel, no more X functions, and stall....but....I like it...
Now, I reinstalled the Xperia original software, and, if someone could tell me....Before installing the SPB shell 3, what exactly I need to do FIRST?
what Dll or else I MUST install first...
Thanks you
if U using stok ROM RAA1 maybe
try update ROM first
download spb 3.0 from the spb site. Then look up a serial somewhere. had no problems at all
It worked, for me without any modifications... I was on the R1 ROM at that point though.
hello
try to install with the exe file instead of the cab file
the cab file sometime block the x buttons
Xperrier said:
I installed the SPB shell 3on my Xperia and had lots of troubles with it, like no way to goes back to Today panel, no more X functions, and stall....but....I like it...
Now, I reinstalled the Xperia original software, and, if someone could tell me....Before installing the SPB shell 3, what exactly I need to do FIRST?
what Dll or else I MUST install first...
Thanks you
Click to expand...
Click to collapse
after install spb shell 3, clean ur star up at windows, delete all. use explorer.. n soft reset. now u can choose manuali 2 spb shell menu
All of you, many thanks for yours advises, and going to study first what is my Rom number and, if I update my Room from, say 1 to 3, do I still need the number 2? sorry my Rom, but, in Hungarian a Rom, is a gipsy, BTW....
I did not knew, a CAB file instead of an EXE file installer could make a difference.....then? a golden rule would be to use an .exe file instead of a cab file?
ok, going to try it and agin, thanks.....happy am I with the XPA forum....really
GOKILL said:
after install spb shell 3, clean ur star up at windows, Yes, but on the Xperia windows folder ....? not too clear for myself delete all.
sorry delete all. What do you mean? do I need a registry editor?
use explorer.. n soft reset. now u can choose manuali 2 spb shell menu,
sorry again what do you mean by manually?
Click to expand...
Click to collapse
thanks, and going to try also
I have lots of problem when install SPB as cab file. After i use exe file and now work perfect. Why is that i dont know
DiabloSoul said:
I have lots of problem when install SPB as cab file. After i use exe file and now work perfect. Why is that i dont know
Click to expand...
Click to collapse
ok, and what Rom do you have? or use? thanks
then it must be something into the cab file..
Try the trial of SPB 3.0.1, not 3.0. Google to find it. This resolves some issues.
Xperrier said:
thanks, and going to try also
Click to expand...
Click to collapse
no need registry editor, just clean up ur starup.. with file explorer. windows/starUp.. and delete spb mobile shell, in my case i choose dellete all.. coz make faster with starUp the X1. same like a PC.. the X1 might be crash booting if the has a lot program in starUp.
or u can just leave auto config and not dellete this
i'm sorry if my english is not fluently..
GOKILL said:
no need registry editor, just clean up ur starup.. with file explorer. windows/starUp.. and delete spb mobile shell, in my case i choose dellete all.. coz make faster with starUp the X1. same like a PC.. the X1 might be crash booting if the has a lot program in starUp.
or u can just leave auto config and not dellete this
i'm sorry if my english is not fluently..
Click to expand...
Click to collapse
perhaps your english is not fluent like mine, but, also, you are able to communicate with another language and, THAT, is the best...What is your native tongue? mine is french, then after a small english and then a very little hungarian...
thanks for you help sweetie
ring-bearer said:
Try the trial of SPB 3.0.1, not 3.0. Google to find it. This resolves some issues.
Click to expand...
Click to collapse
I will, but, after reading all the helpful post, I just found out my Xperia was still runing on Customization version R15A with the variant generik_uk,
Now after having made the update, I see that I have now the R2AA010, perhaps, this is also why I have or had, who knows trouble.... Do I also must update the generik UK ?
Now, if I like to try WM 6.5 do I must update thru the forum, tho the R3AA? or not? here, I am lost, and yes true cooking is ok with me but Rom and UI are not for me...better some Rhum and Coke...heahh
Now I do wonder if it would be also better to reformat my microcard? because I almost install all softwares into it.....
I flashed my X1 to nX1i ROM (found here) and it's working very well so far.
Today i saw a post on another forum that there is a leaked version of Swype but does this work for our beloved HTC hero aswell ?
No, currently only works in WVGA resolution (Droid/Nexus One) and as our Hero is HVGA, this will not work and has been suggested by people who have tried it.
I believe they are developing it for our reso as we speak? Im looking forward to it!
I really can't wait for this to be released for the Hero, especially after trying it on a friend's Droid.
gah dont get me started, iv been waiting for this since swype released the idea! ahahah
Hey I released a modified version of this that will work on the hero. Check it out over at iq0.org
persiansown said:
Hey I released a modified version of this that will work on the hero. Check it out over at iq0.org
Click to expand...
Click to collapse
Hi!!
Thanks. I had downloaded this and tried to install. but it dosn't work.
1. Downloaded this apk.
2. Copied this to sd ram of Hero,
3. Installed this from Astro.
I have MoDaCo 3.1 installed.
Please help.
persiansown said:
Hey I released a modified version of this that will work on the hero. Check it out over at iq0.org
Click to expand...
Click to collapse
thanks for that, so far so good. Works a treat for me
Neo+6210 said:
Hi!!
Thanks. I had downloaded this and tried to install. but it dosn't work.
1. Downloaded this apk.
2. Copied this to sd ram of Hero,
3. Installed this from Astro.
I have MoDaCo 3.1 installed.
Please help.
Click to expand...
Click to collapse
I assume you got? signed-swypebeta.apk.zip ??? rename it just to apk and re try?>
anarchyuk said:
I assume you got? signed-swypebeta.apk.zip ??? rename it just to apk and re try?>
Click to expand...
Click to collapse
Tried this.
Let me tell you what all I did.
After installing this I could't find it in all programes so I went to Astro again and click on swype.apk, so it gave me option of browse file or open Apps Manager. After selecting Apps Manager, there were two options: uninstall , launch. I had selected Launch, which gave error:
"Main Activity not found for com.swype.androide.inputmethod"
Also I had tried Settings>Local&Text>Swype
(I wonder that now I have downloaded and installed Local2 (for Indian region))???
Neo+6210 said:
Tried this.
Let me tell you what all I did.
After installing this I could't find it in all programes so I went to Astro again and click on swype.apk, so it gave me option of browse file or open Apps Manager. After selecting Apps Manager, there were two options: uninstall , launch. I had selected Launch, which gave error:
"Main Activity not found for com.swype.androide.inputmethod"
Also I had tried Settings>Local&Text>Swype
(I wonder that now I have downloaded and installed Local2 (for Indian region))???
Click to expand...
Click to collapse
ohh you mean you cant get it up when you install it? This will be the htc keyboard stopping it, its a right pain but you can get them to swap!
Working great for me!! Thanks a lot for this
ShapeWriter is a similar thing, it's awesome and works on the Hero.
Any chance on some tips on how you guys managed to enable the swype keyboard?
I've got it installed, ran the the tutorial, ticked the enable box etc. but just don't get it to pop up on the screen...
Only thing I've noticed is that the Default option under swype settings just says "Please Wait"
By the way, I bought Shapewriter for the TabletPC and think it has great potential. Especially with ATMOIC layout enabled. But I think the company looks like it is heading towards a dead end. No updates for ages to known issues. Forums have spam on them and questions that have not been replied to for months etc.
Hence I'm hoping swype will be my way forward instead.
Zuber
@zuber
I managed to get it working by opening a fresh type screen (Message, Google search) Press and hold on the empty space and it pops up with input options...select Swype
Got it thanks
Better than Shapewriter imho.
Still a bit buggy, so looking forward to the final version. Hope they do a version for the tablet PC soon as well.
Zuber
Is it possible to have an apk that adds other languages. I'd like to use French with Swype...