Hi all!
Tomtom and Garmin not connect GPS on my Diamond still search..... . In setup I use 3 comm. port (soft.)
Thats problem?
Related
I've recently purchased an EverMore GM-R900 GPS receiver, connected to the 750v serial port through a mini-DIN adapter (which also includes power input from the car adapter). The question is : how do I map the serial (data) to make it available to other apps (other than active sync, which seems to be the only user of the serial...) ? I tried with GPS Gate but unsuccessfully, I cant find the correct source. Has anybody experienced something similar, yet? Perhaps with some carholder with integrated gps?
UP! C'mon.....is there a way? I've also tried with gpsgate but maybe I'm using the wrong parameters....... I've tried (from WM gps config) to map every port but I'm not getting a thing on any of them. The antenna itself seems to be working.
Still No GPS Device Found
Hi Guys,
Thanks in advance, i have gone through this site numerous times but still haven't been able to get my TomTom working on my new Treo750 and Ox-XDA IIs both running WM6.
I have GPS receiver in my cradle which works like a jam on my previous Treo650 (Running PalmOS). But since upgrading to this WM device it has become a night mare can't get it right particularly the way windows is handling com ports.
Can any one please guide me on how to get it going as I don't have PDA with in-build GPS receiver nor bluetooth receiver only this serial connected receiver.
Thanks
Nilesh
not sure i understood
If you have the tom tom software from your 650 and you are trying to use it on wm6 ,it is more than liely a software problem.
i have tom tom running on my 750,with a sirfstar 3 bluetooth gps unit, with no problems but the software came with the device.
If I am not mistaken tom tom allow you a device change every so often, in which case you will be able to download the correct software for your device.
Hello People
Can someone tell me how i must configure my touch dual for using Freedom's Keychain GPS with it.
I dont know why, but i cant connect it with my touch dual.I use tom tom. Whitch com port i must use. And by "External GPS", witch settings i must use?
Thank you for help
Blackdragon
hi mate,
pair the unit with your phone, and then in settings set it as COM PORT 4. Then in TOMTOM configure it for use with an external bluetooth GPS unit and select COM PORT 4. should then work!
whan I start tomtom 7 I saw in task manager also activesync starting...some info about it?
same issue for me.
and each time I launch tomtom7, I have activesync and a WAP connexion is establised .... it is strange.
I have done a hard reset and installed it a new time without other applications but issue is still present.
Hi here,
I just noticed it too . Did you find a solution ?
Do you use an car charger when using TT7? I think it has something to do with connecting an USB cable to the TD
Hi.
I'd like to use my Diamond as an external gps receiver, using it with my notebook. Is it possible to do so? Should I use a usb connection or bluetooth?
TNX
Have a look at Franson GPS Gate. This way, you can direct com4 to Activesync, and the PC-component of GPS Gate will put the input from AS to a virtual comport on the Notebook.
Have fun!
TNX, I'll give it a try.
Shoult I install it on my pc or diamond? Or both?
GPS2Blue seems to be the easy way...
TNX again.
Should I get the same gps lag I have using TomTom on Diamond if I use the phone as external gps receiver?
Up.
Any news?
Try it and you'll find out... I've tested GPS2blue, but don't remember if there was lag.
i have tom tom 6.000 and gps driver v1.20 but its show GPS signal not found or no gps signal in my spv 1000 can any one help me how it will work in c_shekhar"s Rom
tomtom
Hello you must make a com 5 for it to work and then go to tomtom and give it in by the gps settings.
hello
can you explain me more please ?how to do it ?
This is from the wiki, so in future, have a look at it first. I say this because your problem could have been solved much earlier had you read it. It will save you time. If you can't find answers there though, then please do come and ask us.
Tom Tom 6/Garmin/GPS Software seems to restart my Himalaya when looking for my external bluetooth connection?
Pair your bluetooth GPS device with your Himalaya first. After this, make sure to choose the advanced option which will give you the choice of choosing the serial connection and then which port you want to use. I always choose Com 5 as this seems to work fastest, most stable etc. After this, you then leave bluetooth on and in discoverable mode. After this, load up your software. The correct com port should then appear in the list of possible com ports for you to choose from (Com 5). After that, all should be well with the world. The reset seems to be caused when your Himalaya looks for an external bluetooth GPS device on the incorrect com port.