Related
Hi, this is my first time posting on this forum but I have nowhere else to go! I have had an XDA mini now for a few months and it has got to a stage now where I can only hear the other caller by using a bluetooth headset.
My question is would a new ROM affect this, is it the O2 ROM particularly bad? I am wary of flashing the ROM and want to know if a fresh one would make any difference at all.
I have also read up about Radio ROMS, can I just replace this?
Sorry for all the questions, I hope you guys can help!
Welcome to XDA-Developers.
If your in call volume has gotten steadily worse over time, it may be a hardware issue. Before you go trying to flash a new ROM you may want to try backing up your personal data and then doing a hard reset first and see if that solves the problem. If it doesn't then flashing a new ROM probably won't help much either.
If you do decide to try flashing a new ROM then make sure you read and re-read the posts on CID unlocking first and make sure you know what you're doing because doing it wrong can turn it in to a nice expensive shiny brick.
You asked if you can replace Radio ROM's, the answer to that is yes. There are plenty of them around here that you can try out. You might try changing to a different radio ROM first before trying a hard reset, but since you said it's been getting steadily worse I'm thinking that it's probably not your problem. I could be wrong about that though.
Thanks for the reply!
I wouldnt say 'steadily worse' but when I got it it was ok and kept going from normal to whisper quiet, like it was a problem with the signal, now its stuck at whisper quiet. I have done many a hard reset and this worked first time around, but then the cycle repeated itself. Now a hard reset does nothing.
Could it be a speaker connection? Also friends have reported that although I can hear them properly on handsfree (built in), they cannot hear my voice very clearly. Seems an odd combo to me....but hey what do I know!
Could you recommend a radio rom or is it a case of trial and error?
Radio ROMs are kind of a trial and error thing, what works for one person in one area might not work so well for someone else in another. It depends on who your carrier is and where you're located. Try 2.19.11 first, it seems to be the one that works for the most people. If that one doesn't work well, try 2.47 and/or 2.69 next as they seem to be the next runners up.
awesome! will give it a go and let you know!
Thanks again!
sorry to be a pain! but where do I get the rom from?
SpecialAgentCooper said:
sorry to be a pain! but where do I get the rom from?
Click to expand...
Click to collapse
From this forum. Make a search
didn't see that link! Cheers!!
didn't see that link! Cheers!!
I am gonna sound like a complete muppet now but how do i install a radio rom. To complicate things more I am a mac user, but have an intel mac so can run windws stuff if necessary.
Sorry to hassle but im not much good at this stuff!
I don't know anything about mac's, but if you can run windows programs like you said, connect your phone to your sync cable and then run the ROMUpdateUtility that is included in the zip file and just follow the instructions. It's easy, and since I'm guessing that you haven't done this kind of thing before, when the rom update utility runs it will tell you that you will lose all your information on your phone. You can ignore that, you won't lose anything. The same utility is used for installing entire ROMs in which case you would lose everything, but not when just updating a Radio ROM.
thanks for the info. Downloaded the radio Rom suggested, ran the utility but it tells me it cannot update and to get a newer version of the update utility. I have looked into this and it seems my Wizard is a G4 model, is there an update utility for this? if so where can I find it!
Thanks in advance!
dont worry found it on the G4 forum! Installed it and I can hear again! Never thought I would get it fixed! Thanks for all our help! It is no longer in danger of flying against the nearest wall!
Hi all, first post on this site so bear with me. I have been reading all the posts regarding upgrading/changing ROM's from original HTC or carrier ROM to tweaked ROM's etc. The message can get quite confusing so before I take the plunge I'm hoping someone can clear something up for me. I have the Orange (UK) branded TyTnII (Kaiser?) and would like to have the original HTC ROM instead. I have already downloaded this from elsewhere on the forum. I am guessing that this will also change the current radio ROM. Some posts indicate that you must have the phone unlocked before doing this and others that you just need to install the hard SPL to change the ROM. The last thing I want is to have a locked phone, so could anyone advise which of two claims are correct?
You must use hardSPl and then you can flash every rom you want ...
TQM
1. Install HardSPL
2. ...you can install all the ROM you want !
If you flash the radio, then your orange phone will be locked, and will cost you to get it unlocked. I made this mistake, lucky for me, Orange love me so much they sent me a new one
With the new one, I have flashed roms, just make sure they don't change the radio, and you'll be fine.
Ps. You still need to flash HardSPL first.
Ran hard SPL, then ran the HTC ROM now phone is sim locked, which is what I feared. Where can I get the unlock code from? Would like ASAP, Orange take around 2 weeks to provide this.
http://www.imei-check.co.uk/kaiser-unlock.php
This site didn't work for me, I contacted them, and they're aware of the problem, and are working on a fix, it has worked for the majority of people though, and its what everyone else recommends, it'll cost your £20.
Thanks for the quick response, I have followed the instructions on the web site but phone will not connect to active sync as it reports it is locked. Any suggestions?
When mine was locked, it would still connect to activesync, then when I ran their software, it'd crash active-sync and reboot my phone.
I don't know how to get your phone to connect to active-sync, but it can be done, perhaps someone else has a suggestion?
A hard reset has allowed my phone to connect to active sync (phew!) Just waiting for the code. I will let you know how it goes
Recieved unlock code, all now working again, thank goodness. The HTC ROM is an improvement over the Orange one so worthwhile doing. A big thank you to everyone who was kind enough to help out
Glad to hear you got it working
jdennington said:
Recieved unlock code, all now working again, thank goodness. The HTC ROM is an improvement over the Orange one so worthwhile doing. A big thank you to everyone who was kind enough to help out
Click to expand...
Click to collapse
I've just upgraded from a hermes which I hardSPL'd without any issues, so I have previous experiance with flashing roms however I've been having problems installing hardSPL on my tytnII and i keep getting a white screen ?
has anybody had any issues with the orange 1.81.61.2 WWE Rom Version and HardSPL.
i've read a number of posts with regards the "alternative" methods have all resulted in the same "white Screen".
Any help would be appriciated because i HATE the Orange icons.
jdennington ..... how are you finding the original HTC Rom compaired to the "Oranged" version ??
I used the methods described here, they worked for me when I had the same issue you did:
http://forum.xda-developers.com/showthread.php?t=354061
jdennington:
Just wondered what difference you noticed changing from Orange to HTC ROM, apart from the cosmetic ones. By changing menu options, installing multitudinous cab files and tweaking various settings, I have made it such that you would be hard pressed to find any sign of Orange on my phone. As such, i have not bothered with a ROM flash.
Just wondered if you have noticed any performance gains from the flash, or is it just the cosmetic gain you were after?
HTC ROM Tytn II
Hi, looks as though I'm in the same boat but in Australia. My HTC Tytn II was purchased in Hong Kong and now I get an error when trying to install TomTom 6 that says incorrect ROM version? I have blackberry running as well (don't know if that interferes or not). Anyway, does it mean I have to change my ROM to original HTC Tytn II ROM to avoid the Hong Kong version (they told me it was the English version though) and other things work. Please help as I'm out of my depth here.
Annie
anyone knows about schaps_wm6pro_kaiser_4.22_full
Thanks
fisha21
I cant say I have noticed any improvement with response now that the HTC ROM is loaded. However there are a few applications that were not on the Orange ROM that I now have. The look and feel of the phone seems so much better, oh and this morning was the first time I was able to hear a caller whilst using a bluetooth hands free ear piece. I'm not a fan of the cooked ROM's but thats a personal preference, from what I read, there are some very successful ones out there giving a lot of users a much improved Kaiser.
How to Unlock Kaiser
Hi Everybody, I already ran the HardSPL on my Kaiser (which is from Orange). Right now I'm in Colombia but I don't really know how to get the new ROM and how do I do to charge it into the PDA. Of course, my fear is that it is SIM locked. Where can I get the htc ROM and the instructions to load it? THANX
Over the last week or so my htc has been driving me nuts!
Calls just dont come through to me. It seems to be going straight to my mailbox and then Text messages are also delayed.
I cant make calls as it drops it before it even connects with the other party.
However, when I soft reset it works fine to just after the 1st call I make.
I dont want to hand it in for repairs, that saying if I can fix it myself with the help of Xda-developers.
Can anybody help me?
Have you tried different radios?
what you mean radio?
right ..
here is my info
ROM version : 1.56.405.5
RoM date : 08.28.07
RADIO Version 1.27.12.32
Protocol Version : 22.45.88.07H
Wow.... we have some real geniuses here these days. Have you ever thought about looking at the first page of the WIKI here???
http://wiki.xda-developers.com/index.php?pagename=KaiserROM_FlashingFAQ
Start there.
Read
Read
READ MORE ........
Unlike others who flame people for not reading or searching I will not because you have stated you searched. The solution maybe simple... Do you keep an open data connection at all times? If so that maybe an issue, try ending the data call when youre not in use and see if that helps. Ive noticed with my tilt that if I keep the data connection always open my SMS will be delayed and won't recieve all my calls.
pyraxiate said:
Wow.... we have some real geniuses here these days. Have you ever thought about looking at the first page of the WIKI here???
http://wiki.xda-developers.com/index.php?pagename=KaiserROM_FlashingFAQ
Start there.
Read
Read
READ MORE ........
Click to expand...
Click to collapse
If i seem to have a specific problem, it will take me a long time to find the solution.
so heres to that.
ill rather state my problem, Im sure there are forumites here, who really dont mind helping other people.
Proudpop86.. I think i know what you mean with regards to the open data sessions. Ill fiddle around and try and disable it and see if it works. Thanx for the heads up.
as one of boys said you can get all answers in wiki - but here are some info http://wiki.xda-developers.com/
it seems ur radio is bugged. need an update.
your radio rom is the firmware that makes your phone connected to your network provider http://wiki.xda-developers.com/index.php?pagename=KaiserROM_FlashingFAQ
you must know the compatibility of your os rom and your radio read the ultimate thread by alltheway http://wiki.xda-developers.com/index.php?pagename=Kaiser_Radio
you need to perform a hardspl procedure before u change ur radio http://forum.xda-developers.com/showthread.php?t=334679
you will have different results (network strenght, wifi strenght, bt, gps, battery drains) with different radios http://forum.xda-developers.com/showpost.php?p=1862232&postcount=1464
if you are on warranty and new to all of these i advice taking ur device to agent and get it updated official (shipped) roms
stevh0 said:
Over the last week or so my htc has been driving me nuts!
Calls just dont come through to me. It seems to be going straight to my mailbox and then Text messages are also delayed.
I cant make calls as it drops it before it even connects with the other party.
However, when I soft reset it works fine to just after the 1st call I make.
I dont want to hand it in for repairs, that saying if I can fix it myself with the help of Xda-developers.
Can anybody help me?
Click to expand...
Click to collapse
thank you jahrami
seem to have been my Network type settings
If set on auto the phone drops calls, but if Gsm is selected, its perfect.
I do notice however that .. I only Gprs available now and 3G or Hsdpa is not used as usual.
A bit annoying , but i guess its better then the phone missing calls.
Sounds like you have the dreaded dead 3G radio problem. Forcing to GSM will work, at least for some time. If you want full functionality back, that will require sending the phone in for repair.
Anyway to fix it myself?
not really concerned with warrantee's
If it is what I and many others had, no. Only a mainboard replacement will do.
http://forum.xda-developers.com/showthread.php?t=335074
seem to loose all connectivity as soon as i select wcdma
Hi. I have an Orange HTC Touch Diamond and HTC say I need to upgrade to the latest ROM update to resolve a specific issue that’s making my phone almost impossible to use. The problem is that they won’t supply the ROM update because my phone is branded Orange. Orange doesn’t offer any ROM updates because they're useless so either way I’m stuck. The tech chap at Orange said to look around the web and find the download from somewhere else which is what I’m trying to do. Can anyone help? Perhaps someone can download the latest (Feb 09) update and let me have it?
Regards,
John
See ROOM "Diamond ROM developements" where you could find all you need.
The process is reversible but I'm interesting about Tech Chap at Orange: to mount a no brand ROM on a branded it you must chance SPL, this change void warranty...
D'rath
Stock ROMs really are quite poor. I would recommend the ROM in my signature. I have tried most of the WM6.1 ROMs and this one is absolutely flawless. Don't forget though, read up on how to flash first, it's painless and quick if you just follow the instructions. Everything you need is here
Thanks Blibble.
I'm on the case now with your info but am concerned about the various ROM packs that seem to be available. My phone is fine but the problem I have is that it answers calls in my pocket because the screen automatically activates when a call comes in. The latest HTC ROM upgrade apparently fixes this by the need of a sideways swish across the screen to either answer or reject the call rather than just a tap. I'm concerned enough about upgrading my phone but even more so now by an unknown ROM upgrade. What would you recommend?
Thanks,
John
There isn't a "best" ROM! You read 3D about some ROMs then decide and try
D'rath
Thanks, I do realise that but unless the ROM includes this particular fix to stop calls being answered in my pocket - which can be very embarrassing not to mention annoying, there's not much point in me upgrading. So I just need to know how I find out if the fix has been included in these upgrades in the way it has been in the latest HTC upgrade.
S2u2
If you download S2U2 and install it to your phone, that should help you with the problem you are having. It's not a cure, but a good program that runs when a call comes in or when you lock your phone.
http://s2u2.ac-s2.com/
I bought this phone after careful research. I found out that the Voice Command could be downloaded. Then I found out that it might not work. Then I found out if could if I just had the right CAB. Then I found my way here. Now I have read and read for the last two weeks when ever possible and some times for over 8 hours. Here is where I am and I would love some help. I am up against a time frame that is un-movable at this point. Here I am copying and pasting:
I have read a ton of stuff and what I finally have come to is that the CAB to operate and download the BTAG is available and I found it. It is with, this, http://forum.xda-developers.com/showthread.php?t=588882 I just don't know if I have to do a hard SPL or a Soft and or if I do one where to find the directions. I have read a ton of directions but it is not clear if they are necessary for this CAB and the CAB I believe is with Windows 6.5. I have 6.1. So if anyone can answer my questions it would be really wonderful....
should be closed by me for being duplicate...but I will leave it for this time so you can get your phone in gear, but in the future pls refrain from double posting/redundant thread opening, thx
I will also move the thread to general, it is not dev related
I already posted in backup thread, to add info on your h-spl question:
for cabs you don't need h-spl, that's only required for stock roms
so if this cab is only working on 6.5 you would need h-spl to get a 6.5 custom rom on your phone, but only for that
best
I appreciate your leaving it for me. You are obviously not used to working with newer people though. I posted the cab link so that it could be seen in order to ask the question. I am also packing, washing clothes, have my other phone listed on eBay, getting things ready for my garage sale, trying to be quiet while my boyfriend sleeps, feeding the dogs, trying not to upset them.....
In between that read any responses so that I know how to answer the offer on my other phone that I have listed on eBay. Download a backup for the Xperia so that I can load the CAB and if it doesn't work I can restore the backup....
Basically, I am trying to do a lot of things at once. That is why I am trying to cover everything in my posts. I have very limited time.
So, again thanks, I am still unclear as to whether or not this cab that is 6.5 or at least that is the ROM that it is in. I think, I am not very experienced in this.... ergo the link to his info. Back to what I said, I still am not clear on if it will work or I have wasted even more time??
I'm used to, nearly daily, but I don't like them posting all over the forum, especially not doing duplicates or starting new threads for anything
I understand your need but still: there are rules and they apply to everyone here, independent of them being in a hurry or not, having to do a lot of other things in parallel or not,...
I'm sure you noticed and read them during your research here, so pls abide by them
I am not quite sure what your post is even about - too much info all piled and mixed together. If you want an answer, you need to ask a question properly. So what is it that you need to know?
If any .CABs don't work, they can be uninstalled, no need to back up, restore and/or flash the entire phone just to get rid of the unworking .CABs
As far as Voice Command is concerned, I have it running on my X1 and it should run regardless of the ROM you have. I tried versions 1.6.0, 1.6.2 etc - all worked fine. The only difficulty is mapping the buttons with X1. I would recommend mapping left soft key, simply because I have the necessary functions on the screen, so didn't need a soft key to repeat the same, making the key reduntant and available for MS VC.
As far as ROM flashing is concerned, there is an excellent guide for flashing, just look for recommended stickies in ROM Development, but first it feels you are not really up to speed with the terminology - CABs, ROMs etc.
Mod, actually when I have so much to do, even though I read a lot of stuff I have not really completely become familiar with this site. If I had read that I certainly would not have posted it twice. That is why I did not PM the OP of the ROM that I have been referring to. Because what I did read was that no body wanted a lot of questions asked without someone reading.
As to the person who posted about my lingo. Thanks for your comments. I tried finding the folder for the cab on my phone. It is a new phone. Could not find it. Not sure what app it is in. I am familiar with my old phone. This is the 2nd of this one I have had to order now and the first one had so much wrong with it. I spent about a week alone just figuring out that that phone was definitely a lemon. The seller on eBay was not being truthful to me about it. That is a question I asked just recently.
.CABs are small installable programs, in order to have them on your phone, they need to be placed there by you, either to the phone itself or to the storage card, then you can install the program by clicking on the .CAB. There is no folder for the .CAB or app it can be in if you didn't have it placed there to begin with. Again, as I suspect, you are not quite familiar with terminology, you are using the right terms but in the wrong context somehow.
Not sure what you were looking for and not finding on your phone. Again, your descriptions make no sense. Just because you can't find the .CAB you never placed on the phone, doesn't make a phone a lemon, rather you having no idea how to use a phone or how to install anything on it in order for you to be able to use it.
No, I know that does not make a phone a lemon. It's a really long story. Just wanted to thank you for coming back and leaving me a more detailed answer. I am not stupid, I just have way too much too do and limited time so it is a combination of that and not enough sleep and trying to move internationally in 3 days. Thanks again!
Okay, I got it on my phone. But I can't get the bluetooth heaset to work. I read in many different places about assigning a button. I did that. I also say about doing a soft reset. I did that. I don't want to do either of those again for fear that I will loose everything I have at this point. Pleae anyone.....
You need to go to settings, open Voice Command and tick the appropriate option to use bluetooth with it.
Unless, of course, you are talking about general bluetooth connection. In which case i suggest you get settled, give yourself time and have a good read of the instruction booklet, section discussing bluetooth connection.
There are a whole bunch of choices. I am using a plantronics PRO and I saw the information about A2DP. So I tried that and it did not work....
beachinmoney said:
There are a whole bunch of choices. I am using a plantronics PRO and I saw the information about A2DP. So I tried that and it did not work....
Click to expand...
Click to collapse
what didn't work, your headset or A2DP? A2DP is a stereo format for stereo headsets and headphones. Is your headset stereo?